Used Thread Cutting Tool for sale (42,344)

Condition: good (used), Cutting range, internal thread: M 2 - M 12 Rsdpfx Aked D U T Hswou Working radius approx.: 1650 mm

Condition: good (used), Thread cutting chuck, thread chuck, tap chuck, thread cutting apparatus -with slip clutch -Integrated reversing gearbox with quick return -Thread cutting sizes: M5-M20 -Recording: MK4 -Dimensions: 380/95 mm Rodjb A Rxcspfx Akwsu -Weight: 4.1 kg

Condition: excellent (used), TruTool PN 200 electric hand cutting machine Product features The new TruTool PN 200 vibrating shear is mainly used for cutting C-L-U sections, trapezoidal sheet metal, etc. components. The device with a short tool for processing sheet metal with a profile depth of up to 85 mm and for C-L-U sections. Also for corrugated sheet metal. Ideal for hard-to-reach places. The working direction can be adjusted 360° easily and without tools in 45-degree steps. Minimized set-up time Replacement of punch and yoke without interruption and without tools. Unmatched speed Fast and efficient, 2.1 meters per minute at 400 N/mm2 structural steel. Application: Trapezoidal sheet metal For cutting profiles up to 86 mm deep and 132.5 / 40 mm wide. For straight and diagonal cuts. Profiles For cutting C-L-U profiles. Corrugated sheet For cutting and slitting. For bevel cuts and internal and radial cuts. - MAXIMUM SHEET THICKNESSES: Rjdpfx Akouhm E Sswou - MAXIMUM THICKNESS OF 400 N/MM² STEEL SHEET: 2 mm. - MAXIMUM THICKNESS OF STEEL 600 N/MM²: 1.5 mm - MAXIMUM THICKNESS OF STEEL SHEET 800 N/MM²: 1 mm - MAXIMUM THICKNESS OF SHEET METAL MADE OF ALUMINUM UP TO 250 N/MM²: 3 mm - RADIANCES: - LOWEST RADIUS: 50 mm - GENERAL INFORMATION: - OPERATING SPEED: 2.1 m/min. - NUMBER OF SHAKES AT NOMINAL LOAD: 1500 1/min. - INITIAL HOLE DIAMETER: 24 mm - RATED POWER CONSUMPTION: 550 W

Condition: used, 86 sets available (2 pcs. per set)different sizesmore information under "Download" Rodjdc A Saopfx Akwou

Condition: good (used), Internal item no.: 25088 Tool holder Thread whirling holder incl. cutting inserts Index / Traub No.: 12068219 The tool was used on a Traub TNL18 Very well-maintained condition! Rjdpfxexu Dcvs Akweu

Condition: good (used), Internal item no.: 25089 Tool holder Redpfx Akexu Uu Aswju Thread whirling holder Index / Traub No.: W7045012B Very well maintained condition! The holder was used on a Traub TNL18.

Condition: new, thread dia. bis M 36 turning speeds max. 150 U/min thread M5 - M36 working area 2050 Rmax. work height max. 900 mm table surface area 700 x 900 mm oil volume 100 l engine output 4.0 kW weight - pallet system 320 kg equipment: - electro-hydraulic tapping machine - Large working range (max. radius 2050 mm) * Smooth swivel movement, e.g. due to built-in gas pressure dampers - Mobile machine base frame * Oil tank hydraulic unit integrated in the base frame * Hydraulic pressure gauge - Vertical / horizontal thread cutting possible - Connection cable with 16A plug * Special accessories included in the scope of delivery : - Tap quick-change inserts according to "DIN 376" . M05 / M06 / M08 / M10 / M12 / M14 / M16 / M18 / M20 / M 22 . M27 / M30 / M33 / M36 Rsdpfxsy Umd Es Akweu - Infinitely variable speed adjustment incl. digital display - Minimum quantity lubrication (spray oiler/compressed air) - T-slot clamping table - Tapping head can be fixed with magnetic quick-action insert

Condition: new, thread dia. bis M 24 turning speeds max. 280 U/min thread M5 - M24 working area 2050 Rmax. Rsdpfx Akjy Umdleweu work height max. 900 mm table surface area 700 x 900 mm oil volume 100 l engine output 3.0 kW weight - pallet system 280 kg Equipment: - electro-hydraulic tapping machine - Large working range (max. radius 2050 mm) * Smooth swivel movement, e.g. due to built-in gas pressure dampers - Mobile machine base frame * Oil tank hydraulic unit integrated in the base frame * Hydraulic pressure gauge - Vertical / horizontal thread cutting possible - Connection cable with 16A plug * Special accessories included in the scope of delivery : - Tap quick-change inserts according to "DIN 376" . M05 / M06 / M08 / M10 / M12 / M14 / M16 / M18 / M20 / M22 - Infinitely variable speed adjustment incl. digital display - Minimum quantity lubrication (spray oiler/compressed air) - T-slot clamping table - Tapping head can be fixed with magnetic quick-action insert

Condition: good (used), Thread cutting chuck, thread chuck, tap chuck, thread cutting apparatus -Tapping chuck: thread cutting attachment -Cutting performance: -Recording: MK3 -Bore: Ø 23 mm Rodjrvlfrepfx Akwsu -Quantity: 2x thread cutting chucks available -Price per piece -Dimensions: Ø 110 x 325 mm -Weight: 8,0 kg/pc.

Condition: excellent (used), Year of construction: 2013, overall weight: 220 kg, chuck outer diameter: 600 mm, Metal cutting Tooling TDG Spain - 4-600 MACH-ID 9627 Rjdoy T Ik Rspfx Akweu Make: TDG Spain Type: 4-600 Year: 2013 Diameter: 600mm 4 chuck: yes Max. speed:970Rpm Length: 1200mm Width: 800mm Height: 400mm Weight: 220kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: used, Internal threading machine HAGEN & GOEBEL type HG 10 Tapping machine, Vertical tapping machine Machine. No. 4462 Year of construction approx. 1980 Cutting capacity in steel M3 to M10 Cutting capacity in cast iron M3 to M16 Cutting capacity in brass M3 to M18 mm throat depth 250 mm Pinol stroke 80 mm Table size 340 x 240 mm Spindle speed 200-1000 rpm 6 steps Motor power 0.55 and 0.75 kW Mains connection 380 Volt, 50 Hz - 6 speed levels through 2 motor speeds and 3 belt levels - Thread pitch via guide cartridge - 2 guide cartridges with 1.0 mm and 1.25 mm thread pitch - Spindle holder with cone Ø 14.8 to 16 mm and 4 mm keyway - Table height adjustment with toothed rack via hand crank on the round column - Quick-change tapping chuck size 1, Ø 19 mm Rsdpfjupbf Dex Akwou Space requirement L x W x H 850 x 550 x 1800 mm Weight 255 kg Good condition

Condition: good (used), Tapping chuck, thread chuck, tapping chuck, thread cutting attachment -Manufacturer: WMW, thread cutting device type GSA 1 Rodpfx Aotxkunekwou -Recording: MK1 / B12 -Reversing gear: Quick return integrated -Clamping diameter: max 6 mm -Thread cutting sizes: M2-M4 -Number: 2x thread cutting chucks available -Price: per piece -Dimensions: 125/100/60 mm -Weight: 0.7 kg

Condition: excellent (used), REMS TORNADO 2010 THREADER Product description: - Reliable, highly efficient machine for threading, cutting, deburring, threading of nipples, rolling - For installations, locksmiths, production plants - Strong, compact, adjustable design suitable for construction sites and workshops - Operating principle: rotating material - stationary tool - Automatic: clamping chuck, universal threading head, lubrication and cooling - Large workspace and chip container - Adjustable material support - Extremely strong and fast drive e.g.: 2” thread only 15s - Completely maintenance-free gear in a closed oil bath - Two base versions: - portable version on 3 legs, with a removable, large oil tray and chip bowl - T version with a combined, larger oil tray and chip container, for installation on table. A fixed base or a trolley with space for putting away the material, for easy transport, with an optimal working height, stable, as additionally paid equipment - Three high-performance motors to choose from: - a high-performance universal motor, 1700 W, overload protection, rotation speed 53 1/min. - a capacitor motor 2100 W, overload protection. Two rotation speeds 52 and 26 1/min., also under full load. Very quiet operation. - a three-phase motor, 2000 W, overload protection. Two rotation speeds 52 and 26 1/min., also under full load. Very quiet operation. - A convenient two-stage foot safety switch with an emergency button, thanks to which the entire body weight is loaded during work - Two automatic clamping holders with self-centering clamping jaws. Quickly and easily clamp and release the material - Self-clamping chucks ensure maximum clamping force - Strong, reliable pump with high delivery capacity - Optimum multi-sided guidance of the threading agent through the die head exactly to the threading location guarantees clean threads and long service life of the die dies, gear Redpfx Akev T Trusweu and motor - Only one automatic universal die head for all threads, also long ones; automatically opening - with automatic thread length for tapered threads - Fast, easy adjustment of the thread size - Clear thread scale - Easy and quick change of the die dies thanks to their positioning in the clamping part - Reliable, indestructible, high-quality REMS die dies with optimum geometry guarantee very easy entry into the material, easy threading and clean threads. They are made of load-bearing, specially hardened steel for an exceptionally long service life. - Self-centering pipe cutter. Sturdy frame made of forged steel. Ergonomic, wide handle for strong spindle pressure - Specially hardened cutting wheel made of reliable, tough-hard knife steel ensures long service life. - Internal deburrer, Stable, easy-to-use deburring device with variable deburring position. - Specially hardened and machined blade guarantees easy deburring and exceptionally long service life - Two blades for optimum deburring, especially with small pipe diameters

Condition: excellent (used), I sell plasma cutter hypertherm powermax 800 d very good condition. /////Price listed for 1 pc ///// Plasma cutter Hypertherm Powermax 800 Plasma cutter description The Powermax800 plasma cutting system uses an inverter power supply to provide a smooth DC output voltage for superior cutting and gouging of mild steel, stainless steel, aluminum and other metals. The Powermax800's power supply provides a constant output current that varies from 20 to 50 amps, providing optimal performance for all metal thicknesses up to 1/2 inch (12 mm). At 50 amps, the Powermax800 can cut metals up to 3/4 inch (20 mm) thick and cut metals up to 1 inch (25 mm) thick. Rodpfjulc Ixex Akweu

Condition: used, Tapping machine, pipe thread cutter -without tools -Operating voltage: 220 volts -Dimensions: 830/530/H1080 mm -Weight: 64 kg Redefyh Ebspfx Akwou

Condition: used, Plasma Cutting & Grooving with Hand Torch, from 3 to 45 mm Simple and cost-effective technology for any cutting application The PA-S45 W plasma cutting system is suitable for manual and mechanized cutting in the material thickness range of 3 to 45 mm. By using different plasma gases and gas mixtures, electrically conductive materials can be cut and grooved cleanly. As a mobile system, it can be used in workshops, training centers, and on construction sites. Advantages: Optional use of hand or machine torch Suitable for 2D & 3D guidance systems Robust and simple design Rodsy U Urkepfx Akwju Mobile systems for flexible use Reliability even under difficult production conditions Cutting current can be pre-selected in three stages Effective cooling of the plasma torch and its wear parts Quick changeover from cutting to plasma grooving and vice versa Angled torch heads and special shank designs for optimized cutting of 3D parts Wide range of applications thanks to optional equipment Liquid-cooled plasma torches The proven design of the torch components, cathode, and nozzle, is a prerequisite for the quality of the cut surfaces. The liquid cooling of the plasma fine-jet torches guarantees their long service life. Plasma cutting with the systems in the PA-S series is therefore efficient and increases the user's productivity. When cutting construction steel with the PA-S45 W, a swirl gas torch often allows for more frequent piercing. Plasma Grooving Both machine and hand torches can be quickly converted for plasma grooving. This requires changing the nozzles and attaching the ceramic cap (if necessary, with a protector). By using different plasma gases and gas mixtures, all electrically conductive materials such as construction steel, stainless steel, aluminum, and brass can be processed. Plasma grooving is ideally suited for removing welding defects, cracks, porosity, and inclusions, as well as for preparing for counter-welding. Advantages: No carbonization of the material No post-grinding required Low heat input Good observation of the process Reduction of noise levels and smoke generation

Condition: used, functionality: fully functional, machine/vehicle number: 11.031.802, Plasma Cutting & Grooving with Hand Torch, from 3 to 45 mm Simple and cost-effective technology for any cutting application The PA-S45 W plasma cutting system is suitable for manual and mechanized cutting in the material thickness range of 3 to 45 mm. By using different plasma gases and gas mixtures, electrically conductive materials can be cut and grooved cleanly. As a mobile system, it can be used in workshops, training centers, and on construction sites. Advantages: Optional use of hand or machine torch Suitable for 2D & 3D guidance systems Rodpjy U Uqtsfx Akwou Robust and simple design Mobile systems for flexible use Reliability even under difficult production conditions Cutting current can be pre-selected in three stages Effective cooling of the plasma torch and its wear parts Quick changeover from cutting to plasma grooving and vice versa Angled torch heads and special shank designs for optimized cutting of 3D parts Wide range of applications thanks to optional equipment Liquid-cooled plasma torches The proven design of the torch components, cathode, and nozzle, is a prerequisite for the quality of the cut surfaces. The liquid cooling of the plasma fine-jet torches guarantees their long service life. Plasma cutting with the systems in the PA-S series is therefore efficient and increases the user's productivity. When cutting construction steel with the PA-S45 W, a swirl gas torch often allows for more frequent piercing. Plasma Grooving Both machine and hand torches can be quickly converted for plasma grooving. This requires changing the nozzles and attaching the ceramic cap (if necessary, with a protector). By using different plasma gases and gas mixtures, all electrically conductive materials such as construction steel, stainless steel, aluminum, and brass can be processed. Plasma grooving is ideally suited for removing welding defects, cracks, porosity, and inclusions, as well as for preparing for counter-welding. Advantages: No carbonization of the material No post-grinding required Low heat input Good observation of the process Reduction of noise levels and smoke generation

Condition: good (used), Year of construction: 2015, Metal cutting Tooling Rjdpfowvht Rjx Akweu TOS - HUR 50 MACH-ID 2923 Make: TOS Type: HUR 50 Year: 2015

Condition: excellent (used), Diameter: 800mm 3 Chuck: yes Rodswvrp Aopfx Akwju Spindle bore:130mm Connector: Camlock 13 Max. speed: 100Rpm Length: 800mm Width: 800mm Height: 400mm Weight: 200kg

Condition: good (used), Year of construction: 2009, Horizontal: Yes Redpfswvq Taox Akwju Vertical: Yes Diameter: 220mm indexing: 360.000° Centre height:220mm Control system:Siemens 840D Length: 600mm Width: 400mm Height: 800mm Weight: 200kg

Condition: used, Year of construction: 2013, functionality: fully functional, type of input current: three-phase, input voltage: 380 V, PLASMA CUTTING POWER SOURCE THERMAL DYNAMICS ULTRA-CUT 300 PS Rsdpfxsy U Ians Akwsu High-precision plasma cutting system, 300 amps, high-quality Japanese manufacturing. ═════ TECHNICAL DATA ═════ - Brand: Thermal Dynamics (ESAB / Victor Technologies) - Model: Ultra-Cut 300 PS - Year of manufacture: 2013 - Cutting current: 10-300 A - Output voltage: 84-200 V - Duty cycle: 100% at 300 A - Power supply: 380V three-phase, 50/60 Hz - Made in Japan - Serial number: JP13D6015679 - Standard: EN 60974-1, CE ═════ INCLUDES ═════ - Ultra-Cut 300 PS power source - DMC-3000 digital control module - iControl module - Torch and hoses - Connection cables ═════ CONDITION ═════ - From an industrial company in liquidation - Good cosmetic and operational condition - [Operational, with start-up video / Sold as is, verification possible before removal] - DOES NOT include CNC cutting table (only the power source and accessories are sold) ═════ CONDITIONS ═════ - Price: €9,500 (negotiable) - VAT not included / VAT as per regulations - Location: [Your city], Spain - Collection by the buyer or shipment to be agreed upon - Payment: bank transfer Thermal Dynamics is a world-leading brand in plasma cutting, chosen by professional contractors and manufacturers. Robust model for cutting steel up to 50mm, stainless steel, and aluminum. Spare parts available through ESAB. Inquiries and more photos: by message.

Condition: ready for operation (used), Ridgid 1224 Threading Machine, Thread Cutter, Used Machine Overall dimensions: Length: 1140 mm Width: 720 mm Height: 1110 mm Capabilities: Pipe threading: 1⁄4″ – 4″ (8 – 100 mm); 4″ – 6″ (100 – 150 mm) with 161 geared threading attachment. Bolt threading: 1⁄4″ – 2″ (6 – 52 mm). Features: Threads 1⁄4″ – 2″ pipe at 36 RPM and 2½″ – 4″ pipe at 12 RPM. Model 1224 is suitable for threading various types of pipes including black, galvanized, plastic-coated pipes, as well as stainless steel, IMC, and heavy-wall pipe and rod up to 30 Rockwell C hardness. Induction motor ensures noise levels remain within regulatory limits. Special capacitor start/capacitor run motor allows full-range threading even under voltage drop conditions. Uses a 1⁄4″ – 2″ universal die head and a 2½″ – 4″ adjustable die head to cut tapered or straight NPT/NPSM or BSPT/BSPP threads. Constant and proper lubrication of dies and workpieces via head-through oiling. Technical specifications: Motor: 1.1 kW, single-phase, 50 Hz, induction type. Switches: Reverse / Off / Forward heavy-duty rotary switch and integrated foot pedal. Spindle speed: 36/12 RPM. Gearbox: Two-speed transmission with 3:1 ratio. Chuck: Hammer-type with replaceable inserts. Rear centering device: Cam-operated. Pipe cutter: Model 764, fully self-adjusting and self-centering, with 1⁄4″ – 4″ F-229 cutting wheel. Reamer: Model 744, bladed type, 1⁄4″ – 4″. Lubrication: Through the die head. Pump: Self-priming, gear-type, automatic reversing, with constant flow. Rsdpewwgvyefx Akwju

Condition: excellent (used), Year of construction: 2022, Lead spindle mechanism and safety device to prevent tool breakage. Program for single and continuous cycles. Electronically controlled motor braking for single cycles. Digital speed and depth display with programmable thread depth. Part counter. Threading capacity from M5 to M30. Threads per hour: 800. Redpey Sxtmofx Akwsu Normal drilling capacity: 35 mm. Spindle: MK 4. Thread depth: 90 mm. Drilling depth: 160 mm. Overhang: 300 mm, table surface: 550 × 400 mm, overall height: 2105 mm. Weight: 385 kg. 2 machines available.

Condition: excellent (used), Year of construction: 2022, Equipped with a leadscrew mechanism and safety device to prevent tool breakage. Program for single or continuous cycles. Electronically controlled motor braking during single cycles. Motor with pole-reversing capability. Doubled return speed. Spindle speeds are continuously adjustable. Oil circulation lubrication. Table adjustment from the front. Thread cutting capacity, M8 to M45 in E335. Threads per hour: 600. Normal drilling capacity: 50 mm. Thread depth: 150 mm. Drilling depth: 200 mm. Overhang: 325 mm, table area: 650 × 500 mm, overall height: 2150 mm. Weight: 680 kg. Redpfxjy Sxq Eo Akwou

Condition: used, Thread cutting chuck BILZ Type DSPL 127 MK2 Thread size: M3 - M12 Mounting shank: MK 2 Length compensation: 30 mm Clamping range: Ø 2.5 - Ø 10 mm (tap shank diameter) - Chuck clamping for the tap shank and torque transmission on the square - Adjustable safety clutch for torque limitation - Length compensation +10 mm / -20 mm for precise pitch threading Maximum chuck diameter: Ø 58 mm Chuck length: 120 mm Total length with shank: 215 mm Net weight: 1.7 kg Very good condition Rodey E T Dajpfx Akwsu