Paint spraying unit

Makor Start One

Condition: ready for operation (used), Year of construction: 2008, machine/vehicle number: A3347169, functionality: fully functional, number of axes: 3, CNC machine SCM, Record 100 AL action line, 3-axis woodworking line, 400V, year of manufacture 16/07/2008, electrical cabinet, control with safety mat, partition wall, working area 305 x 122 cm, total machine dimensions: approx. 565 x 250 x 260 cm, self-dismantling required 3 axes In perfect working condition Ledpfx Aoxg El Aekmohn 1 large vacuum with details of white panel and 1 small vacuum: Year 2019 / N°A3347169 Type VTLF2.250/0-79 Frequency 50/50Hz Speed 950/1150min-1 Power required 5.5/6.4kW Inlet capacity 244/286m³/h Max vacuum 200/200mbar Video available.

Condition: good (used), Code: 0136 Brand: ITALPRESSE Model: FORMATIC 20.9 Hydraulic fluid membrane press Two sided lamination of veneer to panels shaped or profiled on one face and flat on the other to produce cabinet door raised panels, drawer fronts, desk tops, table tops, kitchen tops, etc. 3-D lamination of plastic foils (PVC, PPE, ABS, Transfer foil ) to panels sheped or profiled on one face to produce: cabinet doors, drawer fronts, desk tops, table tops, kitchen tops, store fixture components, room doors, etc. Platen dimensions mm 2000 x 900 Daylight mm 325 Cylinder stroke mm 325 Heating electric boiler Kw 27 Lsdpfxopbvqvj Akmohn Thrust ton 300 ton N° 3 thrust cylinders Hydraulic unit power Kw 5,5 Pressure control manometer Automatic pressure reset Opening timer Overall dimensions mm 3300 x 1400 x 2400 h Weight kg 8100

Year of construction: 2022, condition: new, Shelves: 17 Clear distance between tubes: 60 mm Tube length for support: 650 mm Length: 200 - 2000 mm Steering rollers: Polyamide, 4 pieces Depth: 870 - 1180 mm Height: 198 mm Ljdpfx Aed Ry I Nekmshn Load capacity: 400 kg

Year of construction: 2001, condition: used, • Heating plate size (mm): approx. 1500 x 2700 Lodokt N Huopfx Akmjhn • Usable area max. (mm): 1250 x 2450 • Loading side (mm): 1500

Condition: like new (used), Year of construction: 2004, WEINIG UNIMAT SUPER 4 planer Lhsdjin Nrgopfx Akmon – German production - very good condition – year of production 2004 – DTR TECHNICAL PARAMETERS: planing width 150 mm planing height 50 mm spindle diameter 40 mm equipped with tools upper adjustable head 1) lower head 11 kW 6000 rpm 2) upper head 18.5 kW 7000 rpm 3) lower head 5.5 kW 6000 rpm feed motor 2.2 kW feed adjustable on the inverter 0-18 m/min feed on cardan shafts pneumatic clamp three upper steel-plated pulling rollers one rubber top roller grooved top pre-top length 1950 mm total power 37 kW central lubrication Transport dimensions: length/width/height 320x220x220 cm weight ~ 2700 kg

Condition: like new (used), Year of construction: 2025, Used cantilever rack: screw system in hot-dip galvanized design Scope of delivery: 4 rack uprights, height 4,160 mm with foot section, 1,200 mm usable depth 12 cantilevers with 1,200 mm usable depth, standard Longitudinal and diagonal struts for 4,000 mm rack length (distance 1,300 mm) Fastening material (screws, nuts and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 90 uprights in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Surface hot-dip galvanized - Rack height 4,160 mm Lhsdpsmhhf Sjfx Akmsn - Load capacity per upright 2,250 kg - Foot section and cantilever arms with 1,200 mm Usable depth - Cantilever arms height adjustable in 100 mm increments - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and C4 load plates in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight with registration before delivery. The material is packed sensibly to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and suitable for dowels and must be able to absorb the loads. The customer must check and ensure that the floor conditions and load-bearing capacity, as well as any official permits that may be required, are obtained. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and is not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: new, Year of construction: 2023, functionality: fully functional, Machine is new, packed and ready for transport in Sellers warehouse in Croatia ! OLIMPIC k 560 composition "T-ER2" (40) - European safety regulations (CE norms) - ”StarTouch" electronic control with 12" display touchscreen n° 100 working programs which can be customized - "RT-V1" pre-milling unit - "VC-VM" gluing unit (Installed power: 3 Kw, Heating time: 12 min , Glue pot capacity: 1,5 kg) - "SGP" - Smart Gluing Pot - "K/SEL" end cutting unit (Motors power: 0,35 kW, Speed of tools: 12.000 rpm) - "R-K" trimming unit (Motor power: 0 ,55 kW, Speed of cutters: 12.000 rpm, Exceeding material to the panel thickness: 2+2 mm, Min. panel thickness with radius: 12 mm, Vertical/front copying devices: disc/pad, Tool radius: 2 mm) - "ROUND X" rounding unit (Motor power: 0,35 kW, Speed of cutters: 12.000 rpm, Edge thickness: 0,4 3 mm, Panel thickness with a straight angle: 10 50 mm, Panel thickness with a shaped angle according to the profile): 10 30/40 mm, Tool radius: 2 mm) - "RAS-HP MULTIEDGE 2R" edge scraping unit - "Nesting" copying device TECHNICAL DATA Variable track feed speed m/min 12 -18 Panel thickness mm 8-60 Thickness of edges in strips mm 0,4-6 Thickness of rolled edges mm 0,4-3 Max. section of rolled edges mm² 135 Distance between two successive panels mm 600 Minimum panel length (100 mm min. width) mm 140 Min. length of edge in rolls mm 180 Min. length of edge in strips mm 220 Min. panel width (210 mm min. length) mm 95 Opening for panel support roller mm 500 Worktable height mm 900 Ledpfxeza U H Rs Akmehn MACHINE DIMENSIONS (transport): lenght: 5.005 mm wide: 1.000 mm height: 1.950 mm

Condition: good (used), Code: 0158 Brand: ITALPRESSE Model: LOCK FORM SYSTEM AIR - CE Standard Hydraulic air membrane press with loading and unloading - CE Standard 3-D coated on one face lamination of veneer to panels shaped or profiled on one face and flat on the other to produce cabinet door raised panels, drawer fronts, desk tops, table tops, kitchen tops, etc. 3-D lamination of plastic foils (PVC, PPE, ABS, Transfer foil ) to panels sheped or profiled on one face to produce: cabinet doors, drawer fronts, desk tops, table tops, kitchen tops, store fixture components, room doors, etc. Lhedpfx Aopvk Diskmsn Platen dimensions mm 2650 x 1250 Piece height mm 55 Pressure control manometer Automatic pressure reset Opening timer

Condition: good (used), Year of construction: 2009, functionality: fully functional, Recycled board end-cutting machine. Utilization of recycled board Lsdpeurmqdjfx Akmjhn

Condition: reconditioned (used), functionality: fully functional, Milling motor dimter for finger joint milling machine HK200 and HK400 50 kW Ledpfxsm Sgvzs Akmshn