Lathe 580 x 2200 mm

Martin DLZ502

Year of construction: 1958, condition: ready for operation (used), Offered is a conventional lathe. Swing diameter over bed: 500mm, swing diameter over support: 300mm, spindle bore: 58mm, taper in the tailstock quill: MT 4, design: conventional leadscrew and feed rod lathe, control: manual. Equipped with three-jaw chuck, four-way tool post, tailstock, chip tray. Weight: approx. 2200kg, overall dimensions X/Y/Z: approx. 2700mm/1100mm/1350mm. Inspection possible by arrangement. Bjdpjzdknwefx Amnodd

Condition: used, CNC cycle-controlled turning machine HARRISON, Type Alpha 400 Plus Machine No. P30180/150 Year of manufacture 1998 Center distance 1250 mm Turning diameter over bed 400 mm Center height 200 mm Turning diameter over cross slide 245 mm Diameter in the crotch 585 mm Bed width 313 mm Cross travel (X-axis) 250 mm Tailstock quill diameter 73 mm Tailstock quill stroke 140 mm Tailstock quill taper MK 5 Spindle bore 54 mm Spindle head size Camlock D1 Size 6 Spindle speed 20-2500 rpm Spindle speed range (Stage 1) 15-275 rpm Spindle speed range (Stage 2) 35-795 rpm Spindle speed range (Stage 3) 110-2500 rpm Feed rate X and Z 0.03 - 0.6 mm/rev Rapid traverse rate X-axis max. 2000 mm/min Rapid traverse rate Z-axis max. 4000 mm/min Threading function Metric / Inch / Diametral / Module Spindle drive power 7.5 KW Power connection 400 Volt, 50 Hz, 23.5 kVA - Cycle control Harrison Alpha / GE FANUC - Language in French (France) - Automatic gear range selection in 3 stages (15-275, 35-795, 110-2500 rpm) - Electronic handwheels with different gear ratios (1/10/100) - 3-jaw scroll chuck FORKARDT Ø 250 mm Type CSN, 1 set of soft jaws - Quick-change tool holder MULTIFIX Size B with 2 inserts - 1 live center - 1 quick-change drill chuck RÖHM, 3-16 mm - Folding chuck guard Bdsdpfxjh Hvk Aj Amnsd - Folding work area safety doors - Chip tray with coolant system under the machine bed - Control cabinet fixed to the machine - RS 232 interface Space requirement L x W x H 2600 x 1450 x 1550 mm Weight 1950 kg Good condition

Year of construction: 1998, condition: good (used), Make: UNION Type: Ti 1800 Year: 1998 Specifications Metric US Standard Table Length 2000 mm Table Width 1800 mm Table load 16000 Movement V-axis 1250 mm Rotation B-Axis 360.000 ° Rotation speed B-Axis Bdedpfxekwcdbe Amnod 1,35 Omw/min. Movement speed V-axis 4000 mm/min. Dimensions (Estimate) Length 3400 mm Width 2000 mm Height 920 mm Weight 6500 kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Year of construction: 1993, condition: good (used), machine/vehicle number: 03.2370, Arthur Klink - internal broaching machine (WAG 748) machine type: internal vertical hydraulic broaching machine manufacturer: Arthur Klink type: RISZ 10 x 1000 built in: 1993 stroke: 1000mm pulling force: 10.000KG working stations: 3 PCs drive: hydraulic system equipment: coolant system, magnetic chip conveyer remark: machine under power in stock the machine has an automatic workpiece loading system for 2 workpieces, ideal useable for high production Optional accessories available on request: tools, workpiece holder Information about us: Bsdjcc D Ddjpfx Amnodd we are specialized for second hand broaching machine and still have anytime about 80 pcs of used broaching machines in our stock, vertical and horizontal machines from 3000kg up 63.000kg pulling force and from 1000mm stroke up to 3500mm stroke.

Condition: good (used), Year of construction: 1995, CNC turning machine Manufacturer: MONFORTS KNC 6, Year: 1995 Control system: Monforts MTC K. Center distance: 2000 mm Max. turning diameter over bed: 630 mm Max. turning diameter over cross slide: 380 mm Spindle speeds: 2 - 1800 rpm Spindle motor: 21/15 kW Spindle bore: 71 mm 3-jaw chuck FORKARDT 400 mm Bsdohktd Nopfx Amnodd Tool holder Multifix size C with 3 tool pockets. Space requirement: Length 4000 mm, Width 2200 mm, Height 1900 mm Weight: approx. 5000 kg Complete machine documentation available. Machine can be demonstrated in operation.

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, travel distance X-axis: 4,000 mm, travel distance Y-axis: 2,200 mm, travel distance Z-axis: 1,100 mm, table length: 4,500 mm, table width: 2,500 mm, spindle speed (max.): 22,000 rpm, CNC Heidenhain iTNC 640 WORKING AREA: Longitudinal X-axis travel: mm 4.000 Transversal Y-axis travel: mm 2.200 Vertical Z-axis travel: mm 1.100 Maximum speed with interpolating axes: m/min 50 WORKTABLE: Dimensions: mm 4.500 x 2.500 Height: mm 300 Load capacity: T/m² 15 T-slots for workpiece clamping mm 28 DIN 650 (H12), complete with leveling elements. T-slot direction parallel to Y-axis movement. CONTINUOUS POSITIONING UNIVERSAL HEAD WITH ELECTROSPINDLE: Automatic universal head indexed to 360,000 positions (every 0.001°). Rotation is driven by direct drive motors and controlled by the CNC as a positioning axis. Automatic tool clamping. Allows 10° undercut machining. Internal cooling system for bearings and axis motors. C-axis rotation range: ± 270° A-axis rotation range: ± 185° Maximum axis rotation speed: rpm 30 Maximum torque available on A/C axes: Nm 450 Axis clamping torque: Nm 1.400 Spindle power (S1/S6): kW 22/33 Spindle torque (S1/S6): Nm 84/128 Maximum spindle speed: rpm 22.000 Constant power range: rpm 3.000 to 18.000 Constant torque range: rpm 10 to 3.000 Tool interface: HSK-A63 DIN 69893 Bdedpfx Ajyv In Iomnsd ELECTROSPINDLE HSK-A100 WITH SEMI-AUTOMATIC CHANGE SYSTEM Spindle power (S1/S6): kW 37/43 Spindle torque (S1/S6): Nm 140/165 Maximum spindle speed: rpm 15.000 Constant power range: rpm 2.500 to 12.000 Constant torque range: rpm 10 to 2.500 Tool interface: HSK-A100 DIN 69893 CHAIN TOOL MAGAZINE – 55 POSITIONS, HSK-A100 / HSK-A63 Floor-mounted fixed chain magazine located at the rear of the machine, fully enclosed for operator protection, equipped with a vertical tool change arm and automatic tool pre-selection. Fixed-pocket management system. Hydraulic axis locking Total tools: No. 55 HSK-A63 tools (DIN 69893): Number of tools: No. 30 Max tool diameter: mm 90 Max tool diameter (with adjacent pockets free): mm 160 Max tool length: mm 300 Max tool weight: kg 10 HSK-A100 tools (DIN 69893): Number of tools: No. 25 Max tool diameter: mm 100 Max tool diameter (with adjacent pockets free): mm 160 Max tool length: mm 450 Max tool weight: kg 20 REQUIRED CONNECTIONS Maximum installed power: kVA 177 Maximum current required: A 235 MACHINE EQUIPPED WITH: • Heidenhain HR550 remote electronic handwheel • High-pressure water and air through the spindle • Semi-automatic electrospindle change system with HSK-A63 and HSK-A100 interfaces • Various tooling included with the machine • Renishaw probe • BLUM laser presetting system • AUTOCAL automatic head calibration system • Visormax subscription for remote monitoring • Electrical cabinet air conditioning unit • Cooling system for all axes and the electrospindle • User and maintenance manual and CE declaration of conformity

Condition: used, greates pass round over bed 540 mm swing diameter over face slide 370 mm centre distance 3000 mm centre height 270 mm turning dia. in gap 815 mm bed width 344 mm spindle bore 88 mm spindle diameter in front bearing 133 mm spindle taper 11" D1 Camlock turning speed range 18-1400 U/min turning speeds 16 3-jaw chuck Röhm Ø 315 longitudinal feeds: 0,06-1,0 mm face feeds 0,03-0,5 mm metric threading 0,4-14 mm inch threading 2-72 G/1" thread - module 0,3-3,5 mm thread - DP 8-60 Pitch tailstock quill diameter 75 mm quill stroke 230 mm taper of tail spindle MK 5 slide valve travel 280 mm upper head travel 150 mm Overall size ca. 4700 x 1100 x 1400 mm weight ca. 3200 kg power capacity 9,4 kW Accessories: 2-axis digital display Fagor Röhm wedge bar chuck Ø 315 mm incl. hard base jaws and hard attachment jaws Multifix steel holder size C incl. 6 interchangeable cassettes Rotating center point Switchable lathe chuck guard 2 steady rests Chip guard Coolant device Work light Guideways in good condition without scratches, not worn Machine is in good overall condition with signs of wear commensurate with age. Bodpjxnqzxefx Amnedd Includes operating instructions Translated with (free version)

Condition: new, weight max. in kg 1000 kg arm length 4000 mm height 3000 Unterkante Ausleger total column height 3790 mm Bdsdpfsxak Hxsx Amnsd swivelling range 270 Grad Total weight, approx. 525 kg Description: - Trolley power supply - Trailing cable, cable slack approx. 800 mm - Operation from the hallway using a pendant control including: - ABUS electric chain hoist - Chain hoist type GM 4 1000.5-2, 2-leg - painted in color RAL 5017 traffic blue - Load capacity 1 t - hook path 3000 mm - highest hook position 2442 mm - Calculation basis FEM 9.901 - Drive group 2m / M5 - Lifting, 2-stage (pole switchable) 1.3 / 5 m / min - Lifting capacity 0.22 / 0.9 kW - duty cycle 60% ED - Circuits 360 c / h Overload protection The crane system complies with the requirements of the Machinery Directive 2006/ 42 / EC as well as the currently valid UV regulations DGUV regulation 52 (formerly BGV D6). included : - Anchor rods L200 (set) size LS 200 - Consists of 8 pieces M27 mm x 800 mm with 1 steel template (500/8) - for fixing the foundation, including accessories for grouting There is an assembly gap between the column base to align the slewing crane and building floor to be provided. The assembly gap is after approx. 4 weeks Crane operation to be poured under by the customer. Fig. Shows a similar crane system

Condition: used, Technical details: x-travel: 700 mm y-travel: 450 mm z-travel: 450 mm spindle cone ISO: 40 (SK 40) table surface area: 760 x 420 mm table feed: längs: 10 - 500 (Eilgang: 1,4 m/min.) mm/min table feed: vertical: 5 - 250 (Eilgang: 1,4 m/min.) mm/min spindle turning speed - continuous: 32 - 1600 / 18 step U/min spindle head swivable left - right: 10 ° links / rechts ° quill stroke vertical: 125 mm feed continuous: 10 - 500 / 8 step mm/min rapid traverse: 1,4 m/min Total power requirement: 6,5 kW Bdodpsvc Avhefx Amnod weight of the machine ca.: 3,0 t dimension machine xH: 2,3 x 2,0 x 1,85 m Further features: Headstock projection min./max.: 2094 / 2544 mm Equipment: -cooling water pump with feed -Linear path measuring system - Heidenhain ND750 Accessories: -Machine vice *

Condition: good (used), NHH lathe Turning diameter bed: 260 mm Turning diameter support: 160 mm Spindle bore: 26 mm Bdjdpfomw Ukcjx Amnjd Turning lenght: 600 mm Heidenhain digital measurement Diameter faceplate: 155 mm Speed: 2000 RPM Dimensions: 150x85x155 cm LxWxH