Universal machining center

Matec 30HV

Condition: good (used), Year of construction: 2004, Universal machining center: Fahrständer / travelling-column Machine type: Matec 30 HV Control: Siemens 840 D Sinumerik Year: 2004 SPECIFICATIONS Travel X-Axis: 2.000 (2 x 750) mm Y-Axis: 600 mm Z-Axis: 800 mm Iiodpfx Aoz Dkr Tohneg B-Axes: +/- 105° C-Axis Spindle speeds: 15.000 rpm Spindle power: 15 kW Torque: 100 Nm Tool: HSK 63 Tool capacity: 48 NC rotary table: RW/NC-160/250 Equipment Internal cooling: 20 bar cooling system Chip conveyor Caliper separating plate Direct linear scales

Condition: excellent (used), Year of construction: 2006, Control system: Heidenhain iTNC 530 Travel ranges X/Y/Z: 2200 x 560 x 720 mm Spindle speed: 18,000 min-1 Clamping area: 2600 x 600 mm Iijdpfx Ahozg Nmksnsg Max. table load: 2200 kg Swiveling head Coolant pressure: 25 bar Tool magazine for 30 tools, SK 40 Optional C or A axis Measuring probe: Heidenhain TS 640 Chip conveyor Paper band filter

Condition: used, Year of construction: 2011, Universal machining center Travel ranges x/y/z = 3000 / 800 / 1000 mm Spindle speed up to 15,000 rpm Spindle drive power 30 kW - 190 Nm Tool magazine with 48 tool positions, HSK 63 max. tool diameter 70 / 130 mm max. tool length 340 / 450 mm max. table load 1500 kg Machine weight approx. 17,500 kg Iijdpfx Asz Apfrohnsg - Oscillating operation - Coolant system - Chip conveyor - CNC control Heidenhain iTNC 530 - Integrated rotary table - Swiveling milling head, horizontal/vertical

Condition: ready for operation (used), Year of construction: 2012, operating hours: 50,106 h, travel distance X-axis: 3,000 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 800 mm, controller manufacturer: SIEMENS, controller model: 840 D solutionline, spindle speed (max.): 9,000 rpm, spindle motor power: 16,000 W, number of axes: 5, This 5-axis Matec 30 HV vertical machining centre was manufactured in 2012. It features a generous X-axis travel of 3000 mm, Y-axis travel of 800 mm, and Z-axis travel of 800 mm (horizontal). The machine is equipped with a powerful motor spindle, capable of speeds up to 9000 rpm, and a maximum table load of approximately 2500 kg. If you are looking to get high-quality machining capabilities, consider the Matec 30 HV machine we have for sale. Contact us for further details. • Travel Z: 800 mm (horizontal) • Travel Z: 700 mm (vertical) • Tilting swivel head with 1° indexing (Hirth coupling) • Swivel radius: 250 mm • Spindle power: 16 kW (40% duty cycle) • Spindle power: 11 kW (100% duty cycle) • Torque: 100 Nm (40% duty cycle) • Voltage: 400 V • Installed power: 55 kW • Central lubrication system • Machine status: fully functional • Operating hours: 50,106 h Additional equipment • NC rotary table Ø800 mm (horizontal), maximum table load approx. 2500 kg • Internal coolant supply through spindle (20 bar) • Paper band filter coolant system with approx. 450 l tank Iedpfx Aeyrqvljhnjig • Electronic handwheel • 3D measuring probe (Renishaw) • Work area lightingPlease note: the vice and zero-point clamping system shown are not included in the scope of delivery. Technical Specification Taper Size SK 40

Condition: like new (used), Year of construction: 2013, operating hours: 39,945 h, functionality: fully functional, travel distance X-axis: 450 mm, travel distance Y-axis: 580 mm, travel distance Z-axis: 400 mm, controller manufacturer: Heidenhain iTNC 530, total height: 2,900 mm, total length: 5,500 mm, total width: 2,650 mm, spindle speed (min.): 28,000 rpm, coolant supply: 40 bar, Year of construction: 2013 CNC controller: Heidenhain iTNC 530 Axes X-axis travel mm: 450 Y-axis travel mm: 580 Z-axis travel mm: 400 C-axis degrees: 360º (0,0001) A-axis degrees: +10 / -110º Feed rates m/min: 80 Rapid traverse m/min: 80 Acceleration in the axes m/s2: 13 Milling/turning table nc: Number of pallets: System 3R (21 pallets type GPS 240, 30pallets type GPS 120 and 24 pallets type ITS50) Table dimensions mm: baseplate for root pallet Maximum workpiece size (D x H) mm: for pallet GPS 240 (275x275x200mm); for pallet GPS 120 (150x150x200mm) and for pallet ITS50 (ø70x200mm) Max. workpiece weight kg: 150 (pallet + workpiece) Spindle Spindle speed rpm: 28000 Iisdpoxv Av Rjfx Ahneg Spindle drive power kW: 35/25 (40%ED/cont) Cooling Cooling through the Spindle Center bar: 40 Tank capacity: 600 Tool system Tool holder: HSK-A 63 Tool magazine slots: 120 Tool changer: Double gripper Equipment Electronic Handwheel Chip conveyor Infrared probe Internal cooling lubricant supply Rotating inspection windows Rinsing gun blowing air through spindle center selectable via M-function Laser tool measurement for measuring tool length and diameter 3D quickSET Arrangement for external pallet management Accuracy package Internal coolant supply Electrical cabinet active cooling unit Spindle active cooling unit Toolholders are not included Tools are not included Paper band filter Machine running times Under power: 62983 Spindle Working: 39945 Rated power kVA: 60 Basic machine dimensions / weight Length mm: 5500 Width mm: 2650 Height mm: 2900 Weight kg: 9500 + system 3R

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, 5-axis Milling Machining Centre | Brand: MATEC | Type: 30 HV Year of manufacture: 06/2008 Range of components: Steel, cast and welded structures. The large X-axis and the head, which can be swivelled through 105° in either direction, are ideal for multi-sided machining of long profiles or shafts. The machine can be inspected under power by appointment. Condition: In working order / ready for use. Operating hours ((September 7, 2026): Control on: 76.085 h Machine on: 62.198 h Program run: 26.653 h TECHNICAL SPECIFICATIONS Travels: - X-axis: 3.000 mm - Y-axis: 800 mm - Z-axis: 1.100 mm - A-axis: +/- 105° - B-axis: 360° - 1-axis NC swivel head, swivels through +/- 105 degrees - Speed range: 20 - 9.000 rpm - Drive power of motor spindle increased: 30 kW * Torque max.: 190 Nm * Boring capacity in steel: ca. 60 mm * Milling capacity: approx. 500 cm3 * Thread cutting: M30 SPECIFICATIONS: - CNC control system: HEIDENHAIN iTNC 530 - NC rotary table, brand: KESSLER, embedded in the machine table, SKH-NC 6/800 * Horizontal faceplate,diameter: 800 mm * Direct measurement system for the NC rotary table * Part accuracy: : +/- 12" * Load capacity max.: 2,5 tons * Tangential torque with clamping: max. 6.500 Nm, incl. motor (AC) with integrated rotary measuring system, hydraulic clamping and incl. additional CNC axis - Clamping plate: Width / length: 835 / 3.500 mm Number of T-slots: 7 Slot width: 18-H8 - Amperemeter for the main spindle drive - Tool magazine: 48 positions - Additional tool magazine: 48 positions, including tool changer, specialised software and control panel for loading tools whilst the machine is running in automatic mode - Working area: * Rapid speed: 30 m/min * Feed rate: 30.000 mm/min - Spindle: * Cone/tool holder: SK40, DIN 69871 * Rotational speed: 9.000 / 30 kW - Internal coolant supply 40 bar (paper belt filter, tank capacity: 450 l) - High coolant pressure at the external nozzles High-pressure coolant pump, switchable via the M function in the parts programme to the external nozzles on the headstock, 20 bar. - Coolant supply flow monitor - Compressed air through the tool - Centralised oil lubrication - Oil mist extraction system - Direct measurement system: X, Y and Z axes - 3D measuring probe, brand: RENISHAW RMP 60, with radio signal transmission for control, including control software Isdpfezyy Rmox Ahnoig - Tool breakage detection - Tool length measurement - Fully enclosed work area with a roof; a completely enclosed work area. The loading doors are designed in such a way that loading by crane is possible at any time whilst they are open. - Safety fence fitted to the machine - Stronger linear guides for the Y-axis = 800 mm X = size 65, Y + Z = size 55 - Bellows with steel vanes - Rinsing gun - Electronic handwheel (portable), brand: HEIDENHAIN HR 410 - Chip conveyor - Workstation lighting (2-light) - Extraction system - Safety/machine guard glasses are being replaced - Compressed air refrigeration dryers - Documentation - CE marking Special features: - Zero-point clamping system - Swiveling head - The CNC rotary table, in combination with the swivel head, enables 5-sided or 3D machining of workpieces The sale does not include any clamping devices. Without guarantee of completeness and correctness of the technical information and the equipment. - Subject to prior sale -

Condition: used, Year of construction: 1999, Travel X/Y/Z: 2000mm/600mm/800mm, rapid traverse: 30m/min, feed rate: 30m/min, max. spindle speed: 9000rpm, tool holder: SK40, tool positions: 48, clamping plate: 650×2500mm, control: Bosch Type 3 OSA. Documentation available. An on-site inspection is possible. Isdpfezz Irhjx Ahneig

Condition: used, Year of construction: 2024, x-travel 400 mm y-travel 400 mm z-travel 375 mm Iiodpfx Aezvhm Ishnog control Siemens 840D sl Linear

Condition: good (used), functionality: unexamined, travel distance X-axis: 4,000 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 800 mm, controller manufacturer: HEIDENHAIN, controller model: iTNC 530, total height: 3,700 mm, total length: 12,000 mm, total width: 7,000 mm, table width: 1,000 mm, table length: 4,800 mm, rotary table diameter: 630 mm, overall weight: 25,000 kg, spindle speed (max.): 18,000 rpm, number of slots in tool magazine: 60, mount diameter: 40 mm, Equipment: chip conveyor, MATEC 30 HV Universal Machining Center - Year of manufacture: presumably 2006 Iedpezxzf Ajfx Ahnjig - Tool holder: SK 40 - Table with 9 T-slots - Incl. swiveling head: 360° - Incl. chip conveyor, coolant system, and safety fence Please note: the hydraulic clamping systems shown in the photos are not included in the scope of delivery! Please note: the machine can be transported on a standard truck! FCA D-72589 Westerheim - loaded onto a truck

Condition: ready for operation (used), Year of construction: 2004, operating hours: 31,189 h, spindle speed (max.): 15,000 rpm, travel distance X-axis: 2,000 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 800 mm, controller manufacturer: HEIDENHAIN, controller model: TNC 426/430PB, number of slots in tool magazine: 36, number of axes: 3, This 3-axis Matec HV30 was manufactured in 2004. It features an X-axis travel of 2,000 mm, Y-axis travel of 800 mm, and Z-axis travel of 800 mm. The machine is equipped with a Heidenhain TNC 426/430PB control and a maximum spindle speed of 15,000 rpm. If you are looking to get high-quality machining capabilities, consider the Matec HV30 universal machining centre we have for sale. Contact us for further details. - Rotary Table Diameter: 800 mm- Axes: 3-axis (X/Y/Z)- Swivel head: ±110°, 1° indexed positioning- Head indexing: Incremental, 1° steps- Coolant / Compressed Air Supply: 40 bar through the spindle- Number of Spindles: 1- Tool Magazine Slots: 36- Input Power Type: Three-phase current- Additional Equipment & Features: D800mm rotary table installed, chip conveyor, paper band filter unit, documentation/manual, continuously variable speed Iijdpszvc Awofx Ahnsg Technical Specification Taper Size SK 40

Condition: ready for operation (used), Year of construction: 2023, A Keyence optical 3D coordinate measuring machine with a 360° 3D scan is available. Measuring accuracy: +/-10µm, repeatability: 2µm, resolution: 0.1µm, point density: 16 million, measuring diameter (low magnification): 300mm, measuring diameter low magnification/composite: 200mm/500mm, rotation range: 360°, tilt range: 45°, max. table load: 50kg. Machine dimensions X/Y/Z: approx. 1000mm/1000mm/1000mm, weight: approx. 65kg. Documentation available. On-site inspection is possible. Iijdpfx Ahswx Rcysnsg

Condition: used, T-slot system: 18 H8, working spindle: SK40, length: 5000mm, width: 3240mm, height: 3800mm, basic machine weight: 17.5t, machine-on operating hours: 31,546h, control-on operating hours: 56,903h, program run time: 10,521h, with documentation. An on-site inspection is possible. Isdpfx Ahozun U Nsnsig

Condition: ready for operation (used), Year of construction: 2012, A Matec CNC machining center is offered. Travel X/Y: 3000mm/800mm, horizontal Z travel: 800mm, vertical Z travel: 700mm, B-axis: +/-105°, NC rotary table diameter: 800mm, rapid traverse: 30m/min, feed rate: 30m/min, spindle taper: SK40, max. spindle speed: 12000rpm, spindle power: 30kW, tool magazine: 60, operating hours (04.02.2026): 50106h, control system: Rexroth IndraMotion MTX with Siemens Operate. Machine dimensions X/Y/Z: approx. 7160mm/5400mm/3200mm, weight: approx. 15t. Expected to be available from the end of 2026. Documentation available. Inspection possible by prior arrangement. Ijdpjzka Nqjfx Ahnoig

Year of construction: 2012, condition: excellent (used), machine/vehicle number: HIKSA250Aneu, Complete Telemecanique / Schneider Canalis KSA - 400A busbar system available! Stock 75 running meters!!! Type KSA 250A / 250 amps - 5 poles - L1 L2 L3 N PE Voltage Ui max. 690V, frequency 50 - 60 Hz Rail length predominantly 5m, also 1.5m and 3m available Price per meter including connectors, end pieces and brackets Feed and outlet boxes 16-32-63A are available as options (other tap-off boxes 125 - 250A available on request) The dismantling was carried out by a qualified electrician. Busbars are in GREAT condition!!!! Please ask for the desired lengths or accessories! Stock items, available immediately!!! Iiedpfx Ahepgmryeneg ----- old Kloeckner Moeller BD1 system still available! Busbars, corner parts, feeds and outlet boxes for the old Kloeckner Moeller BD1 / BD 1 system in stock!!! Please ask ! Are you also looking for a crane system?

Condition: good (used), Year of construction: 2001, functionality: fully functional, machine/vehicle number: 0397, travel distance X-axis: 2,000 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 1,100 mm, spindle speed (max.): 9,000 rpm, table length: 2,500 mm, table width: 850 mm, coolant supply: 20 bar, Equipment: documentation/manual, Well-maintained MATEC 30HV with various features: automatic B-axis +/-90 degrees with 1-degree division integrated NC rotary table, diameter 630mm Heidenhain TNC426 with electronic handwheel internal coolant supply with paper band filter (20 bar) Ijdpfszt Iztox Ahnjig tool magazine with 36 positions spindle hours: 13,000h suitable for SK40 compressed air to the external nozzles chip conveyor with integrated coolant system (discharge height: approx. 850mm) chip flushing gun tool probe for tool measurement center partition available complete enclosure of the work area with a roof Bellows are new Lifting cylinder was renewed in 2026 Ball screw drive including nut, bearing, and coupling was renewed in 2025 The risk of dismantling and transport, as well as the costs of dismantling and transport, are entirely borne by the buyer. Inspection is possible by appointment.