CNC turn-mill center

Mazak QUICK TURN Nexus 200

Condition: good (used), Year of construction: 2003, operating hours: 24,000 h, functionality: fully functional, machine/vehicle number: 1160597, turning diameter: 380 mm, spindle speed (min.): 35 rpm, spindle speed (max.): 5,000 rpm, travel distance X-axis: 230 mm, travel distance Z-axis: 575 mm, rapid traverse X-axis: 30 m/min, rapid traverse Z-axis: 33 m/min, total height: 2,100 mm, total length: 4,000 mm, total width: 2,000 mm, overall weight: 5,000 kg, controller manufacturer: MAZAK, controller model: MAZATROL 640 NEXUS, milling spindle speed (min.): 25 rpm, milling spindle speed (max.): 4,500 rpm, number of slots in tool magazine: 12, Equipment: chip conveyor, documentation/manual, MAZAK QUICK TURN NEXUS 200 CNC Lathe - Operating voltage: 415 V - Frequency: 50/60 Hz - Maximum swing diameter: 675 mm - Standard turning diameter: 276 mm - Maximum turning diameter: 380 mm - Maximum bar capacity: 65 mm - Distance between spindle nose and turret face: 135 - 1220 mm - Tailstock travel range: 1050 mm - External turning tool size: 25 mm diameter - Internal turning tool size: 40 mm diameter - Milling drill capacity: 20 mm - Milling tap capacity: M 12 - Rapid traverse C-axis: 400 rpm The machine is equipped with a tailstock, a collet chuck, and a chip conveyor. Rsdpfxjym Rxio Ag Nop Please note: The item must be definitively collected between 21.04. and 30.04.2026 at a yet to be determined time. FCA D-96257 Marktgraitz – loaded onto truck

Condition: good (used), Year of construction: 1997, x-travel 600 mm y-travel 450 mm z-travel 400 mm Control Heidenhain 430 ITNC tool taper SK 40 voltage 400 V control voltage 24 V weight of the machine ca. 6 t - Operating hours: 48,690 - Max. table load: 1,000 kg - Machine weight: 6,000 kg - Includes tool holders – SK40 - Includes all descriptions - Includes programming manual – Heidenhain - Includes 1 machine vice - Includes clamping claws Rjdpjwbi A Djfx Ag Nep

Condition: reconditioned (used), Year of construction: 2007, MAZAK QUICK TURN NEXUS 200-II MSY Max. turning diameter: 380 mm Max. machining length: 511 mm Max. milling speed: 4,500 rpm Max. spindle speed: 5,000 rpm Max. bar diameter: 65 mm Machine is equipped with: Rsdpjyhwy Iefx Ag Nop - CNC control Mazatrol Matrix - KITAGAWA three-jaw chuck for main spindle, diameter 210 mm - KITAGAWA three-jaw chuck for secondary spindle, diameter 169 mm - Tool Eye - C-axis - C-axis on sub-spindle - Y-axis - Interface for bar loader magazine - Automatic parts catcher - Reinforced coolant pump - Chip conveyor - 8 stationary tool holders - 2 driven tool holders

Year of construction: 2005, condition: ready for operation (used), General Data Measurements width 1780 mm Measurements depth 2765 mm Measurements height 1840 mm Machine weight 5100 kg Rodjx D Rmtopfx Ag Njp Control Unit Brand MAZATROL Main Drive Spindle speed range 5000 Spindle motor power 26 kW Number of axis 3 Movement X-Axis Movement 230 mm Z-Axis Movement 575 mm Turret Number of turrets 1 Tools Number of station 12 This 3-axis Mazak Quick Turn NEXUS 200MS was manufactured in 2005. It features a maximum turning diameter of 380 mm, main spindle speed up to 5000 rpm, and a sub-spindle speed of 6000 rpm. The machine includes a Mazatrol 640T Nexus CNC control and has a robust design with dimensions of 2765x1780x1840 mm, weighing 5100 kg. If you are looking to get high-quality turning capabilities consider the Mazak Quick Turn NEXUS 200MS machine we have for sale. Contact us for more information. Application Types Turning

Condition: good (used), Year of construction: 1998, Manufacturer: Henninger Type: ZS-201 Year of manufacture: 1998 Self centerring device Double column slide ways Dressing Unit Tailstock by rack & pinion Eccentric adjustment 0 - 20 mm Large Cone-Stone tooling package Specifications Metric US Standard Minimum workpiece Ø 20 Ø Min. Rjdpsvt Tuijfx Ag Nep Maximum workpiece Ø 450 Ø Max. Max. product length 1200 mm Speed 18300 Rpm Max. grinding angle 45 - 120 ° Max. workpiece weight 190 Dimensions (estimate) Length 1250 mm Width 1250 mm Height 1900 mm Weight 365 kg Please note: The information on this page has been compiled to the best of our knowledge and belief by us and, where possible, by the manufacturer. The information is provided in good faith but accuracy cannot be guaranteed. Accordingly, it will not constitute a representation and terms of contract. We recommend that you review all important details.

Condition: good (used), functionality: unexamined, overall weight: 80 kg, total width: 990 mm, total height: 870 mm, total length: 1,180 mm, stack height: 800 mm, tank capacity: 900 l, empty load weight: 80 kg, We hereby offer you, without obligation, around 200 used steel stacking boxes and storage containers made of galvanized steel sheet. Manufacturer: unknown Dimensions of the stacking box (overall): 1180 x 990 x 870 mm (L x W x H) Redpfx Ajvtckmog Nep Stacking height: 800 mm Internal box height: 700 mm Box volume: approx. 0.9 m³ Weight: approx. 80 kg/unit Note: The steel stacking boxes were used by the previous owner on construction sites as containers for sorted construction waste. Emptying into larger transfer containers was carried out using a forklift with a rotating fork. For this reason, the stackable containers are manufactured with extra thick-walled construction. Sale takes place without obligation, excluding warranty and guarantee, to commercial customers only. We would be pleased if the steel stacking containers are of interest to you. Your service team, Mertens & Frowein GmbH

Condition: ready for operation (used), Swing diameter over bed/face slide: 570mm/420mm, turning diameter: 420mm, turning length: 635mm, traverse path X/Z: 220mm/635mm, speed: 5000rpm, spindle bore: 79mm, max. bar diameter: 65mm. Tool positions: 12, driven tools: 6, tool holder: VDI 30, rapid traverse X/Z: 24m/30m/min. Machine dimensions X/Y/Z: approx. 3500mm/2500mm/2000mm, weight: approx. 4500kg. On-site inspection is possible. Redpfx Agov Uqcgs Nop

Condition: used, Year of construction: 1969, max. wheel diameter 160,175 mm gear width 355 mm max. module 4,5 spindle bore 75 mm centre distance 410 mm min. number of teeth 2, 3 cutter diameter max. 115 mm cutter length max. 105 mm axis distance between cutter and workpiece - max. 138 mm axis distance between cutter and workpiece - min. 30 mm milling head -swivable 120 ° milling spindle speeds 70 - 400 U/min axial-feeds 0,25 - 4,0 mm/U radial feeds 0,09 - 1,5 mm/U Redpfx Asvzhf Sog Njp total power requirement ca. 9,5 kW weight of the machine ca. 3,5 t dimensions of the machine ca. 1730x1400x1440 mm Equipment/accessories: - Interchangeable wheels - Milling arbors - Clamping devices - Documentation

Condition: good (used), Year of construction: 1989, operating hours: 64,136 h, Centre height: 350 mm Turning length: 1000 mm Max. swing diameter over bed cover: 600 mm Max. swing diameter over cross slide: 360 mm Spindle bore: 107 mm Speed range: 16 – 3150 rpm Rodpfevr Eh Eex Ag Nop Feed range longitudinal & face: 0.5 – 5000 mm/min Rapid traverse longitudinal & face: 9 m/min Main drive: 30 kW Dimensions of machine with chip conveyor (L x W x H): 5400 x 2200 x 2000 mm Weight: 6400 kg Accessories / Special features: • CNC control GILDEMEISTER EPL 2 with TFT display General description: CNC manual input control system with program entry via function and numeric keypad. All information is entered in dialogue with the screen. Integrated menu technology with plain text display of all functions. Operator keypad, display, and electronic handwheel located within a separate chip guard housing. The EPL control offers the following capabilities: • Direct interactive program entry and editing by the operator through the EPL control without manual technological preparation • NC programs in ISO/EIA format can be entered, output, or manually keyed in via the RS 232 serial interface Machining cycles: • Removal cycles for longitudinal, facing, and contour turning, including with allowance • Thread cutting • Undercuts as per DIN 509-Form E and F and DIN 76; grind stock programmable • Axial and radial grooves as per DIN 471 and 472, including bottom finishing • 90° radii and 45° chamfers • Automatic cutter radius compensation for cycles, undercut, groove, radius, chamfer Programming: • Block-orientated, metric/inch, diameter for absolute entry, radius for incremental entry • Full circle programming, subroutine technology, hide levels for program sections, zero point offset, mode selection via menu Program entry and output: • Interactive via guided menu or direct in dialogue • Hydraulic 3-jaw chuck Ø 315 mm with through spindle bore Ø 80 mm • Hinged chip conveyor • 12-position tool turret VDI 40, 6 standard stations + 6 driven tool stations • Coolant system • RS 232 interface • Electronic handwheel • Electric foot switch for 3-jaw chuck and tailstock quill • Lighting • 12 various standard toolholders (to be finalized on site) Overhauled servo drive for main spindle, 06/2025 Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel

Condition: excellent (used), Working travels 510 x 360 x 300 mm Table size 600 x 360 mm Spindle taper BT30 Spindle speeds -12'000 rpm Tool changer 20 Pos. Control FANUC 18i-MB Coolant through spindle Rsdpfxjuy S Hbs Ag Nop misc. accessories MARCELS MASCHINEN CH