5-Axis CNC Machining - MECAL MC 302 Geos

MECAL MC 302 Geos 5

Condition: good (used), Year of construction: 2014, functionality: fully functional, machine/vehicle number: 9911832, travel distance X-axis: 10,600 mm, travel distance Y-axis: 1,570 mm, travel distance Z-axis: 740 mm, rapid traverse X-axis: 70 m/min, rapid traverse Y-axis: 60 m/min, rapid traverse Z-axis: 40 m/min, total height: 2,760 mm, total length: 11,900 mm, total width: 4,500 mm, overall weight: 10,500 kg, spindle motor power: 10 W, spindle nose: HSK F63, tool length: 150 mm, tool diameter: 20 mm, tool weight: 3,000 g, input voltage: 400 V, type of input current: three-phase, Equipment: chip conveyor, documentation/manual, The MECAL MC302 GEOS-5 5-OSI machining center, manufactured in 2014 in Italy, is designed for milling, drilling, threading and cutting profiles made of aluminum alloys, plastics and steel. The machine, equipped with high-end components and innovative solutions, performs machining both on a single working field and inside 2 separate working zones, which translates into a significant increase in the speed and efficiency of the production process. Simultaneous machining on two work zones is possible through the use of a longitudinal work area with a sliding machining station and a chip conveyor. Tsdpfxju Dl R Uo Ac Njf The MECAL machining center for aluminum profiles achieves high structural rigidity, thanks to a base made of quality steel tubes. During machining, the profile is held by special clamps with an independent power system, allowing positioning and automatic repositioning of each individual clamp in a very short time. All 5 axes (X,Y,Z,A,C), driven by motors with digital systems, move on automatically lubricated precision guides. The MECAL GEOS-5 machining center is offered with 3D software, providing a high level of programming flexibility, user-friendly operation and an intuitive graphical interface. Technical specifications of the MECAL MC302 GEOS-5 profile milling machine - number of axes : 5 (X,Y,Z,A,C) - feed rate in Y/Z axis : 1570/740 mm - spindle tilt in A axis : ± 120° - spindle rotation in C axis : ± 210° - accelerated feeds in X/Y/Z axis : 70/60/40 m/1 - 3D graphics software - tool storage capacity : 18 - maximum electro-spindle speed : 24000 rpm - power of electro-spindle : 12 kW - maximum blade diameter : 500 mm - maximum diameter of side and face milling cutter : 200 mm - central lubrication

Year of construction: 2002, condition: good (used), AXIS COURSES X AXIS (longitudinal) (mm) 7,700 Y AXIS (transverse) (mm) 470 Z AXIS (vertical) (mm) 420 AXIS A (spindle rotation) 0°  180° ELECTROSPINDLE Maximum power in S1 (kW) 8 Maximum speed (rpm) 24,000 Tool attachment cone HSK - 63F Automatic tool holder coupling ● Cooling with heat exchanger ● AUTOMATIC TOOL MAGAZINE ON BOARD CARRIAGE Maximum number of tools magazine 8 Maximum number of angle heads that can be inserted into the tool magazine 2 Maximum blade diameter that can be inserted in the magazine (mm) Ø = 180 FUNCTIONS. Multipiece operation ● Dynamic pendulum operation ● MACHINABLE FACES With direct tool (top face, side faces) 3 With angle unit (side faces, heads) 2 + 2 With blade tool (top face, side faces and heads) 1 + 2 + 2 TAPPING CAPACITY With compensator M8 Rigid (optional) M10 WORKPIECE CLAMPING Standard number of vices 8 Maximum number of vices 12 Independent motorized vices ● Tedpfx Acorupldj Njf Maximum number of vices per zone 6 2021/04/01 w

Condition: ready for operation (used), Year of construction: 2008, operating hours: 9,965 h, - USED - 3-AXIS VERTICAL MACHINING CENTRE WITH ROTO-PALLET X-AXIS TRAVEL: 560 mm Y-AXIS TRAVEL: 400 mm Tedeq Nqkxspfx Ac Njf Z-AXIS TRAVEL: 570 mm DISTANCE SPINDLE NOSE-TABLE: 210 - 780 mm RAPID FEEDS X-Y-Z: 40 - 40 - 32 m/min SPINDLE: 80-10000 rpm; 15-18,5 kW; ISO 40 - BT PALLET: N.2 ; 712X475 mm MAX ADMITTED LOAD: 300X2 Kg HIGH PRESSURE COOLANT: 15 Bar TOOL MAGAZINE: CHAIN-TYPE ; 32 POS MAX TOOL DIAMETER: 90(150) mm MAX TOOL LENGHT: 300 mm MAX TOOL WEIGHT: 8 Kg CONTROL UNIT: FANUC 21i - MB WEIGHT: 7600 Kg OVERALL DIMENSIONS: 3010 x 3450 x 3145 mm

Year of construction: 2023, condition: new, IMMEDIATELY AVAILABLE ! Vibratory finishing machines with separator The machines of the series VKUE can be used for the surface treatment of metallic and non-metallic workpieces. These machines have a large sieving surface and allow easy separation of the workpieces from the abrasive bodies. Optional accessories Tjdpfxjn Smbro Ac Nef - Pneumatic sound flap - Pneumatic damper control - Frequency control - Metering pump - Magnetic valve - Control panel base - Flushing tube (different types) The pictures are for orientation only. The optional accessories are available additional charge.

Year of construction: 2024, condition: new, Machining Center Rumba - Processing length 3,000 mm / 4,000 mm CNC-controlled machining center with vertical machining spindle suitable for machining extruded aluminum profiles, light metal, PVC and steel from 3 sides. Controlled tilting worktable: -90°/0°/+90° with intermediate angles. The machine is equipped with an electrospindle 4Kw, 18000 rpm, controlled by inverter and quick tool change (tool changer) with spindle ISO30. Interpolation X, Y, Z and W axes controlled by the numerical control. Brushless motors for X, Y, Z and W positioning. Complete with 4 pneumatic double clamps, tool diameter correction via software. Axis movements on linear guides. Left profile stop. 10.4-inch color monitor (touchscreen with simplified Windows-based graphics, TeamViewer for remote maintenance, special software HICAM 2 / CAMPROX for loading ISO files and running programs). Possibility to process longer parts. Standard equipment: 4kw electrospindle ISO30 4 pneumatic clamps (manually adjustable) safety guard automatic tool changer (10 tools) 4x ISO30 cone complete with tools 3x compartments for collecting chips air nozzle Technical specifications: X-axis travel 3,000 mm / 4,000 mm Y-axis travel 400 mm Z-axis travel 300 mm Rapid traverse (X,Y,Z): 50 m/1' Acceleration (X,Y,Z): 1.5m/s2 Electrospindle: 4Kw ISO30 / 6.6kw HSK63 (optional) Tjdpfehywz Sox Ac Nof Spindle cooling: air cooling Max tool length: 130mm Max. tool diameter: 140mm (saw blade) Working pressure: 7 bar Weight 2500kg It is always possible for you to inspect the desired system in our production/demonstration hall. Please do not hesitate to contact us.

Year of construction: 2018, condition: excellent (used), For machining aluminium and steel profiles Fully functional, in very good condition Year of manufacture: 2018 Machining length: 7,200 mm 3-axis control with 15" monitor Tool changer: 8 positions / turret 8 pneumatic horizontal material clamps Autonomous clamp positioning Two separate work zones, suitable for pendulum operation Tsdpewynitefx Ac Nsf 2 pneumatic material stops 8 tool positions / BT30 turret Barcode scanner Handheld control unit Safety light curtain at the front and lateral safety fence Minimum quantity lubrication system Centralised lubrication system Thread cutting without compensating chuck Easy programming via hand control unit High-speed spindle up to 18,000 RPM Includes 3 angle heads X-Axis [mm]: up to 7,200 / 7,200 Y-Axis [mm]: up to 485 / 310 Z-Axis [mm]: up to 340 / 260 Traverse speed X/Y/Z-Axis [m/min]: 60/60/60 Max. milling cutter diameter: 25 mm Max. saw blade diameter: 180 mm Max. tool length: 200 mm (tool + holder) Max. spindle speed: 6,000 RPM Spindle power: 6 kW Weight: approx. 5.5 t Total operating hours: 30,844 h Total spindle hours: 11,583 h

Condition: used, TECHNICAL DETAILS - Quantity of spindles : 6 - Bar clearance : 40 [mm] - Rotation speed : 7 000 [rpm] - Spindle power : 13 / 24 [kW] NUMERICAL AXES : 27 - Slides unit 1.1 : axes X and Z CNC-controlled - Slides unit 1.2 : axes X and Z CNC-controlled - Slides unit 2.1 : axes X and Z CNC-controlled - Slides unit 2.2 : axes X and Z CNC-controlled - Slides unit 3.1 : axes X and Z CNC-controlled - Slides unit 3.2 : axis Z CNC-controlled - Slides unit 4.1 : axes X and Z CNC-controlled - Slides unit 4.2 : axis Z CNC-controlled - Slides unit 5.1 : axes X and Z CNC-controlled - Slides unit 5.2 : axis Z CNC-controlled - Slides unit 6.1 : axis Z CNC-controlled + SCARA axis - Slides unit 6.2 : axes X and Z CNC-controlled - Slides unit 6.3 : axis X CNC-controlled ELECTRICAL INPUT - Voltage : 400 [V] - Frequency : 50 [Hz] - Installed power : 65 [kW] DIMENSIONS OF THE MACHINE - Floor space : 3329 x 2032 [mm] - Height : 2654 [mm] - Weight: 7100 [kg] HOURS - Hours under power : 45965 - Production hours : 19065 EQUIPMENT - CNC Siemens 840D (PL) double NCU - 2 control panels CN - 6 collet receivers TOPLUS with built-in stop - 1 counter-spindle in position 6.1 - Clamping device in counter-spindle : chuck Röhm KFD-HS 110/3 - Coolant through counter-spindle center Tsdsuhantjpfx Ac Nof - Cn options counter-spindle/ polygonal milling - Rear machining device on slide 6.2 : 3x fix - Preparation 2 additional controls with electronic shaft in position 1.2.3 - Preparation 2 additional controls with electronic shaft in position 4.5.6 - STAUBLI robot type TX60 (6 axes) - Robot collet double clamping external type PZN50 - Swiveling plate (4 positions) - Coolant tank KNOLL with hinged chip conveyor, 2 HP pumps 40 [bars] - Oil mist aspiration device Büschel - Cooling unit RIEDEL - Preparation ARTIS

Condition: new, Year of construction: 2025, 2040 SPECIAL milling ploter is a precise machine constructed in Poland. It can be used to process many different materials such as wood, wood-based materials (chipboard, MDF, OSB, etc.), plastics (plexiglass, PVC, HPL, etc.), composites (dibond, carbon, alucobond), soft metals, etc. Construction of the machine is made out of steel which gives it high rigidity as well as resistance to congestions associated with the machining process. The plotter is equipped with a user-friendly interface that is easy to use, but also has advanced functions. CONSTRUCTION: The plotter is made entirely of high quality steel. During the production process, all elements undergo a special heat treatment. WORK AREA: The usable area of our machine tool is 2100 x 4100 [mm]. AXIS RANGE AND GATE CLEARANCE: The standard range of the Z axis is 200 mm. However, it is possible to increase it to 400 mm. Todpfsin Uilox Ac Nsf DRIVES: Our machine tools were powered by digital motors with high resolution and high power, which ensures appropriate acceleration and speed in particular directions. Classic and proven helical blades work in the X and Y axes, which ensure high durability and precision, and the Z axis is driven by a high-quality ball screw. All axes run on rail guides. SPINDLE: The cutting tool is driven by a strong, liquid-cooled and durable high-class brushless spindle. The spindle bearing is high-quality machine bearings, very quiet and guaranteeing above-average durability. The rotational speed of the spindle ranges from 6 to 24 thousand. RPM An inverter is used for power supply, which has more power than the spindle, which protects against speed drops when working under heavy load. SOFTWARE: The machine is equipped with appropriate CAD / CAM software in the latest version. The software enables quick and easy design of elements, which the program then converts into the so-called G-code. It is also possible to import finished files from other programs. CONTROL: The machine is operated by the controller, which has its own processor and operating memory, which ensures stable and reliable operation. The machine controller has the function of active vector analysis, thanks to which the operation of the device is smooth and the error in processing is small. The controller has the function of returning to further work after the loss of power, so there is no need to initialize the program from a scratch. The memory built into the controller allows the machine to work without having to load the program each time. Additional options: - vacuum table with Busch or Becker pump - chip extraction system - oil mist - any size of the working table

Year of construction: 2018, condition: as good as new (ex-display), Miter saw with a saw blade diameter of 600mm (optional 800mm) - manual miter adjustment - Pneumatic table clamping - Pneumatic workpiece clamping (height and inclination angle of the clamping cylinders infinitely adjustable) - Two-handed safety control Optionally available: Todped Rhzwofx Ac Njf - Automatic miter adjustment - Roller conveyor with length stop or positioning system - Design as a sawing machine - Preload magazine - Horizontal clamping device - Suction system - Other accessories on request We will be happy to make you an offer tailored to your requirements. The machine can be inspected and tested in 56812.

Condition: excellent (used), Year of construction: 2016, operating hours: 1,395 h, functionality: fully functional, machine/vehicle number: 1400040877,  4-axis (X, Y, Z, A) center,  For economical and efficient machining of aluminum profiles and thin-walled steel profiles,  Version with air-cooled milling spindle,  All machining processes such as milling, drilling and threading take place on a stationary profile,  Smooth machining using all tools,  Simultaneous tool magazine ensures short tool change times and, as a result, optimal machining cycles, Tedpfxjuc U S Ne Ac Nsf  Magazine can be equipped with eight tools,  Windows operating system  Machine equipped with eluCam program  Max. length of machining fields with front machining: 4200 mm  Max. length of machining fields without front machining: 4320 mm  Automatic length measurement on both sides,  Barcode reader,  Stationary tool magazine (8 slots),