Band Saw

MEP - Vollautomat SHARK 230-1 NC 5.0

Condition: used, Year of construction: 2000, With electric height and tilt adjustment Used, excellent condition, little used Make Altendorf Type F45 Year of manufacture 2000 Machine number GS-tested Motor 4 kW Steel guides Carriage length approx. 3000 mm Cutting width approx. 1050 mm Pivoting up to 45° Prepared for scoring unit Parallelogram guard Tabletop extension Anodized aluminum parts Electric height adjustment Electric tilt adjustment Digital display: - Cutting angle - Speed Extraction connection D 120/80 mm Gsdpevxlq Hjfx Ag Ssuh Space required approx. 3010 mm x 1800 mm x 1500 mm Weight approx. 1000 kg Storage location 97447 Gerolzhofen, free on load, unpacked Sold in the current condition as seen, without warranty or guarantee

Condition: used, Saw BEHRINGER HBE 321 A Dynamic Gusdpfx Agox Tvkxe Seh

Condition: used, Year of construction: 1989, Technical details: bore capacity in steel (diameter): 28 mm throat: 285 mm bore stroke: 165 mm drill capacity in cast iron: Ø 35 mm spindle taper MT: MK 3 spindle speed:: 65 - 1.750 / 4x steples U/min feed: 0,1; 0,2; 0,3 manuell/automatisch mm/U Distance spindle/table max.: 80 - 680 mm table clamping surface:: 500 x 370 mm table rotating: 360 ° drill table adjustment: 600 vertical mm column diameter: Ø 130 mm total power requirement: 7,5 kW weight of the machine ca.: 273 kg dimension machine xH: 0,9 x 0,6 x 1,9 m Gusdpfx Aou Idkzeg Seh The machine can cut threads, change of direction left/right selectable via foot switch and/or depth stop Table can be swiveled and adjusted in height. *

Year of construction: 2017, condition: ready for operation (used), Offered is an OptiMill MF 4V milling machine, almost new, 100h. Year of construction 2017, travel ranges X/Y/Z: 800mm/320mm/400mm, stepless spindle speed 9-6750rpm in 8 speed ranges, with electronic speed control, quill stroke: 127mm, 3-axis digital display DPA21, right/left rotation reversing switch, drilling depth stop, cross table X/Y 1244mm/230mm T-slot 16mm, chuck guard, coolant system, manual central lubrication, universal compressed-air tool clamping system ISO 40, stepless table feeds in X/Y, weight approx. 1200kg. Viewing is possible by arrangement. Gjdpfexyk Ucex Ag Seuh

Condition: good (used), Year of construction: 2006, machine/vehicle number: 2329200, functionality: fully functional, operating hours: 33,674 h, travel distance X-axis: 800 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 800 mm, overall weight: 11,000 kg, table length: 700 mm, table width: 900 mm, spindle speed (max.): 16,000 rpm, table load: 800 kg, 5-axis machining center, manufacturer: DECKEL MAHO, type: DMU 80 P duoBLOCK, year of manufacture: 2006, operating hours (h): 33,674, serial no.: 2329200, travel (X/Y/Z): 800/800/800 mm, max. spindle speed 16,000 rpm, HSK 63 tool holder, HEIDENHAIN Mill Plus IT control, G7 function, internal coolant supply, 60-position tool changer, chip conveyor, DMG filter system, serial no.: 13812-01560, DMG WK331 cooling unit. Guedpfxjrkz Rgs Ag Soh

Condition: new, Year of construction: 2026, CORMAK ZX 40BPC is a solid metal drilling and milling machine. Possibility of head rotation +/- 90 degrees of spindle, possibility of head rotation +/- 90 degrees, automatic spindle feed, right and left rotation, large table, liquid cooling, automatic table feed in the x axis, powerful engine, ability to drill up to 40 mm. Rotational speed up to 2500 rpm Machine characteristics HEAVY STABLE CAST IRON AUTOMATIC SPINDLE FEED ADJUSTABLE HEAD HEIGHT MASSIVE CROSS TABLE WITH PRECISELY GRINDED SURFACE DOVtail-shaped guides QUIET OPERATION THANKS TO GROUND GEARS LEFT AND RIGHT ROTATIONS ROTATING HEAD +/- 90° Technical data Max. drilling size (steel/cast iron) 32/40mm Face milling width 80mm End milling width 22mm Spindle extension 125mm Spindle taper MT4 Spindle speed (1400 rpm motor) 50～2500min-1 Gujdpfevxhfmsx Ag Ssh Maximum distance of the spindle tip from the table 735mm Maximum distance of the spindle tip from the base 1245mm Distance of the spindle from the column surface 272 mm Dimensions of the work table 730x210mm Base dimensions 690x520mm Engine 1.3/1.8kW Cooling engine 40W Dimensions 1200x1000x1910mm Weight 440 kg

Condition: new, Year of construction: 2025, Sharpening solutions for chisels and hand tools. Quality that has been proven thousands of times in the trade. ✓ Burr-free grinding without removing the cutting edge! The specially developed grinding principle uses the grinding allowance to prevent the formation of a burr. This makes additional grinding of the cutting edge unnecessary. Side grinding of the cutting edges is possible in the same clamping. ✓ Dry grinding without annealing or burning the workpiece! The heat is dissipated from the workpiece using the grinding allowances. ✓ Time and cost savings! Time is money. The efficient grinding principle sharpens the workpiece within a few seconds. ✓ Extremely easy to use! The system is simple, easy and quick to use. Effortless clamping and unclamping of the tools. Even trainees or unskilled workers can operate this machine. Problem-free and masterfully. ✓ Inexpensive maintenance! The machine has hardly any wearing parts. Only the grinding allowances and the grinding wheel wear out. ✓ Swiss quality! High-quality components guarantee stability and durability. Machines that are up to 50 years old are still in use. ✓ Swiss precision! The machine stands for a guaranteed high-quality grinding result. SAVE TIME, MONEY AND NERVES Application example: plane irons and chisels Sharpening and honing: Conventional methods: 4.0 min ISELI method: 0.5 min. ⇒ TIME SAVING: 3.5 min. Every medium-sized company has to sharpen at least 6 tools every day. This used to take 24 minutes. With the ISELI sharpening method, it only takes 3 minutes. You therefore save 21 minutes per day, 4620 minutes per year (for 220 days) or the equivalent of 77 hours. Gjdpfxevrbubs Ag Souh Based on EUR 35.-- per working hour including operating costs, you save around EUR 2,700.00 per year.

Condition: ready for operation (used), length 6000 mm width 2500 mm total power requirement / kW Guedpfx Agjud Il Sj Seh Without PC and software Dimensions (L×W*H): 6000 × 2500 x 350 mm, without vacuum plate Manufactured according to DIN 876 / class II

Year of construction: 2005, condition: ready for operation (used), Bar diameter min./max.: 5mm/102mm, bar length min./max.: 150mm/1200mm, machine length: approx. 1950mm, machine width: approx. 950mm, machine height: spindle height+345mm, machine weight: approx. 450kg. Documentation available. On-site inspection is possible. Gedpewt Tk Nofx Ag Seuh

Year of construction: 2021, condition: new, Fastech Horizontal Bandsaw, Fully Automatic, BMSO 350 GA Cutting capacity (round): 350 mm Cutting capacity (rectangular): 400 x 350 mm Cutting capacity (square): 350 x 350 mm +30° Round cutting range: 320 mm +30° Flat cutting range: 400 x 350 mm +30° Square cutting range: 350 mm +45° Round cutting range: 320 mm +45° Flat cutting range: 290 x 300 mm +45° Square cutting range: 290 x 290 mm Motor power, main drive: 2.2 kW Hydraulic pump power: 0.37 kW Coolant pump power: 0.12 kW Band speed, infinitely variable: 20-100 mm Guodpeg Ekt Njfx Ag Seh Saw band dimensions: 4160 x 34 x 1.1 mm Height of work surface: 760 mm Weight: 1050 kg Length: 2450 mm Depth: 920 mm Height: 2020 mm Roller conveyor, 1200 mm Infinitely variable band speed Hydraulic clamping device High-performance gearbox Hydromechanical saw band tensioning Saw band brush Control