Band Saw

MEP Shark 261-1 HB

Condition: new, Cutting range: round 0°: 170 mm square 0°: 150 x 150 mm flat 0°: 150 x 190 mm round 45°: 125 mm square 45°: 95 x 120 mm working height : 870 mm cutting speeds : 40 / 80 m/min saw band: 2080 x 20 x 0,9 mm coolant pump: 100 W saw motor: 0,75 kW connection: 400 V dimensions L x W x H, approx.: 1340 x 810 x 1320 mm Weight, approx.: 146 kg Features: - Saw bow can be tilted up to 45°. - With 2 saw blade speeds for optimum adaptation to the workpiece - Ideal for cutting tubes, profile material as well as solid material made of VA, iron, etc. - Generously dimensioned saw arm for low-vibration work - Lowering of the saw arm via hydraulic lowering cylinder - Low noise level due to stable design - Switch-off after end of cut by micro limit switch - Quick-action vice for simple and fast workpiece clamping - Precise, adjustable saw blade guide for optimum cutting results - Coolant system with pump - Incl. base frame - CE/IEC, German documentation and German service Hodpsilk H Tefx Aamsh Scope of delivery: - BiMetal saw band 2080 x 20 x 0.9 mm, 6/10 ZpZ - Band tension adjustable via manometer - quick clamping vice - material stop - Coolant device with pump - Hydraulic lowering cylinder - Motor protection switch - Automatic limit stop after end of cut - underframe

Condition: good (used), Offered is a used double toggle jaw crusher from Krupp. Good condition, fully operational. 500 x 300 mm, 15 kW, new tools. The motor is currently being overhauled. Hedpfx Ajwy U Icjameh

Condition: used, 7 pieces Bending tools for bending machine Length 3000 mm Hsdpfxob D Ry Rj Aamoh

Condition: new, Year of construction: 2024, Manual band saw machine for cuts from 0° to 60° right. Hydraulic belt tension, loop handle with control button. Combination belt guide with lateral bearings. Carbide cutting tips and an upper bearing. Manual pruning or pruning option without the user, with the weight of the bracket and controlled by hydraulic brakes; then the bracket is raised again manually to the desired position. Manual clamp for quick and precise blocking of the part. Rotation of the bracket from 0° to 60° to the right with locks, precise measurement of the angle, manual vice with quick-release lever. Millimetric degree scale rod. Coolant tank integrated on the upper side of the base frame with a discharge nozzle and electric coolant pump for cooling on both sides of the saw blade guides. Control voltage 24 VAC, main switch and control. Maximum current protection and short circuit. Connection voltage: 400V/50Hz/3Ph standard. Machine colour: yellow RAL 1018 and gray RAL 7036. It is always possible for you to inspect the desired system in our production/demonstration hall. Please do not hesitate to contact us. Hedpfx Aaogculvemsh

Condition: used, Year of construction: 2022, Technical details: cutting diameter: 128 mm saw band length: 1640 x 13 mm saw band width: 0,64 mm cutting range 90 degrees: round: 128 mm cutting range 90 degrees: flat: 100 x 150 mm cutting range 45 degrees: round: 90 mm Hedpeu Nig Refx Aamoh cutting range 45 degrees: square: 90 x 75 mm band speed: 24 - 35 - 55 m/min electrical connection: 220 V / Hz. total power requirement: 500 Watt machine weight approx.: 80 kg dimension machine xH: 0,95 x 0,52 x 1,1 m The machine is unused-new, in the original box. The band saw can be moved manually. Application for steel, cast iron and non-ferrous metals. Workpiece clamping by means of clamping jaws by hand wheel, 1x fixed and once movable, clamping range 165mm, swivel range 60°. limit stop for length adjustment max. 85mm i.D. *

Condition: good (used), Year of construction: 2001, CNC bed type milling machine Fabr.IBERIMEX-MVR Hodpfx Aaod Eranemjh Type: UH-1250 BJ. 2001 Control HEIDENHAIN TNC124 Procedures: X1250mm Y500mm 460 mm Clamping table: 360mmX1800mm Spindle retainer: ISO50 Machine with full enclosure. Machine card see more data. Machine in good condition.

Condition: new, Sawing band --- 2925 x 27 x 0.9 mm Sawing speed --- variable 20 ~ 80 M/min Motor --- 400V - 2.2 kW Weight --- 495 kg Cutting capacity 90 ----- 270 mm / 260 x 320 mm Cutting capacity 60 ----- 140 mm / 140 x 140 mm Cutting capacity 45 ----- 230 mm / 220 x 220 mm Cutting capacity -45 ---- 200 mm / 220 x 150 mm INCLUDED Saw band Workpiece stop Hodpfxega Tzuo Aamsh Pedestal Pressure gauge for sawbelt tension Saw band guide with carbide inserts Quick Release Clamp Cooling pump Hydraulic cylinder Motor protection switch Automatic end stop

Condition: new, Year of construction: 2025, The CORMAK BS 260G band saws, due to being equipped with a hydraulic cylinder, a cooling and an arm swivelling up to 60°, together with blades from renowned German Röntgen company, are used commonly in ironworking where precision, quality and cutting speed are important. Horizontal band saw with a swivelling arm for cutting metals, allows for cutting in plane perpendicular to the axis of material cut and at any angle from 0 to 60º. Material for cutting can be fed manually or by any mechanical feeding device, with automatic tool feed. Band guides are equipped with dedicated carbide plates and bearings. This has a huge impact on band guiding, its durability, cut straightness, cutting accuracy and quality. Machine's arm is made of profiled CAST IRON. Control panel is located by the arm. The drive from the electric motor directed to the cutting band driving wheel is transmitted by a motor with worm drive. The cutting band is tensioned on two cast iron wheels with a manual tightener and guided by adjustable rolling and linear set of carbide guides. A separate flood coolant container with an electropump is inside. The arm lowering speed (the cutting speed) is adjusted with a hydraulic cylinder. The feed speed is controlled by the control panel. There are 2 cutting band speeds to choose from: 36 and 72 m/min. In rest arm position (after the cutting process) the cutting band drive is switched off automatically. Safety is ensured with cutting band guards and microswitches stopping the motor after cutting cycle is finished or after any of the guards are opened; additional protection consists of automatic switch-off of the band saw in case the cutting band breaks. Technical data Cutting band saw dimensions 2455×27×0.9 mm Band tension mechanical (manual) Band speed 36, 72 m/min Feed speed 0–50 m/min (stepless feed) Arm lowering control Hodpevuf S Nofx Aamjh stepless – hydraulic cylinder Vice base height 900 mm Power supply 3-phase 400V Motor power 1.1 kW Weight 216 kg Warranty 12 months Manual yes CE declaration yes Angle 0º ø230 260×150 225×225 45º ø165 180×130 165×165 60º ø105 100×90 110×110 *Please note that machine is sold without CEE connector by default, since there are many different types of it. If you would like to receive it with the machine, please write it to the seller before making a purchase/during order proceeding.

Condition: used, functionality: fully functional, Year of construction: 2016, operating hours: 6,951 h, load capacity: 2,000 kg, lifting height: 4,700 mm, free lift: 1,450 mm, fuel type: gas, mast type: triplex, construction height: 2,120 mm, fork length: 1,100 mm, empty load weight: 3,480 kg, drive type: Treibgas, LPG forklift Hodpfeukra Uex Aameh Mast type: Triplex Technical condition: normal Front tires type: Superelastic Front tires Condition: 80 - 100% Rear tires Type: Superelastic Rear tires Condition: 40 - 60% Description: The device may be partially painted, workshop and UVV tested. Prices are available on request. Sideshifter, fork positioner, Sideshifter and fork positioner from Meyer. 3rd valve, 4th valve, rear working lights, roof cover, full free lift, safety pilot,

Condition: new, 1 brand new semi-automatic horizontal band saw machine with double mitre Hjdpovyidmjfx Aameh Make: HUVEMA / Beka-Mak, Origin Türkiye Model: HU 230 DGH-4 / BMSY 230 DGH Technical data: Cutting range: Round 230 mm Rectangle 320 x 130 mm Square 230 mm -45 ° Round 180 mm -45 ° Flat 230 x 100 mm -45 ° Square 150 mm +45 ° Round 210 mm +45 ° Flat 230 x 160 mm +45 ° Square 180 mm +60 ° Round 120 mm +60 ° Flat 120 x 100 mm +60 ° Square 100 mm Working height 795 mm Main drive motor power 1.0 - 1.3 kW, 400 V, 50 Hz Motor power coolant pump 0.12 kW 2 speeds 35 / 70 m/min Saw blade dimensions 2730 x 27 x 0.9 mm Dimensions L x W x H 1350 x 700 x 1300 mm Weight 415 kg Accessories / Special features: • Semi-automatic operation • Hydraulically clamping vice via foot pedal • Mitering on both sides using a swivel frame o The material to be sawn remains straight in space! o No turning of the material during miter cuts! o High efficiency with enormous time savings! • Preset precision stops 0°, 45° and 60° left and 45° right • Replaceable work table • Hydraulic vice, can be moved sideways to the left and right • Adjustable length stop 500 mm for cuts of the same length • The lowering of the saw arm is continuously regulated by a hydraulic cycle, after sawing the arm moves back up automatically and the vice opens • Coolant system • Chip brush • Pivoting control panel • Electric safety switch for blade tension and saw blade cover • Emergency stop switch • CE-compliant Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 D - 44143 Dortmund-Wambel