Wrecker

MERCEDES-BENZ Actros mit Rampen, Maschinentransporter

Condition: new, mileage: 100 km, power: 290 kW (394.29 HP), overall weight: 26,000 kg, fuel type: diesel, color: white, axle configuration: 3 axles, gearing type: automatic, loading space width: 2,550 mm, loading space length: 8,800 mm, loading space height: 1,050 mm, Year of construction: 2025, Equipment: ABS, air conditioning, navigation system, parking heater, soot filter, Brand new Mercedes Benz Actros 2540L 6x2, configured as a transporter for construction machinery and aerial work platforms. Truck equipment: - Long-distance cab (sleeper cab) - Auxiliary heater (parking heater) - Safety package - Driver comfort package - Trailer package - Steering tag axle - LED tail lights - Euro 6e emission standard - Automatic transmission - Sun visor - Beacon lights - Multifunction steering wheel - Single bunk - Refrigerator - Navigation system - GVW: 26,000 kg - Automatic climate control - White paintwork - suitable for long-distance transport - etc. Body: - Body manufactured from laser-cut and folded special profiles in low-bed design - Body length approx. 8,800 mm, minus tool box approx. 490 mm - Frame height unladen approx. 1,050 mm - Frame width approx. 2,550 mm - 2 stretch ramps, each with one fixed section and one extendable section, ramps laterally adjustable - Ramp surface made of grating floor - Mechanical ramp locking including holders on the outer frame when not in use (optionally with strap securing) - Ramps operated by electro-hydraulic unit, including emergency controls on the control block and hand pump for total failure - Hydraulic rear supports - All hydraulic functions controlled via radio remote control - Grating floor with increased load capacity - Rear section incl. chamfer - Front wall approx. 2,000 mm high with inward-folded profiles - Stainless steel tool box installed in front of the bulkhead - 2 stainless steel tool boxes on the frame sides for lashing materials (1 left, 1 right) - 1 stainless steel tool box rear right (for hydraulic unit and control block) - Work lights: 1 pair on cab rear wall, 2 pairs on sides of the frame, 2 pairs at the rear - 2 access ladders for load area access Load securing: - Longitudinal beams with Multi-X contour incl. 2.5 t lashing points - 6 pairs of 6 t lashing points integrated in the longitudinal beams - Outer frame with perforated design featuring 2.5 t lashing points - 6 pairs of 6 t lashing points integrated into the outer frame - 4 pieces of 6 t lashing points at the rear Guodpfx Aew E Abneh Dsk - 4 pieces of 6 t lashing points in front of the forward bulkhead tool box (beneath the floor) Paintwork: - Body KTL powder-coated in RAL 9005 black - Bulkhead painted in RAL 9005 black - Ramps and grating floors hot-dip galvanized Adhesive markings: - Side and rear reflective film in accordance with EC regulations. Further details available on request.

Condition: used, mileage: 1,73,900 km, first registration: 11/2000, overall weight: 12,500 kg, fuel type: diesel, color: orange, axle configuration: 2 axles, gearing type: mechanical, emission class: euro3, Year of construction: 2000, Equipment: ABS, air conditioning, all wheel drive, compressor, trailer coupling, U 400 Municipal Winter service equipment EPOKE 2.0 cbm mounted spreader Gsdpfx Aoi R Ahmeh Dsuk

Condition: new, mileage: 100 km, power: 290 kW (394.29 HP), overall weight: 26,000 kg, fuel type: diesel, color: white, axle configuration: 3 axles, gearing type: automatic, loading space width: 2,550 mm, loading space length: 8,800 mm, loading space height: 1,050 mm, Year of construction: 2025, Equipment: ABS, air conditioning, navigation system, parking heater, soot filter, Brand new Mercedes Benz Actros 2540L 6x2 for construction equipment and aerial work platform transport. Truck equipment: - Long-distance driver cab - Auxiliary heating - Safety package - Driver comfort package - Trailer package - Steerable trailing axle - LED rear lights - Euro 6e - Automatic transmission - Sun visor - Beacon lights - Multifunction steering wheel - 1 sleeping bunk - Refrigerator - Navigation - 26,000 kg GVW - Automatic climate control - White - for long-distance transport - etc. Body: - Body manufactured from laser-cut and bent special profiles in low-bed design - Body length approx. 8,800 mm minus toolbox approx. 490 mm - Frame height unladen approx. 1,050 mm - Frame width approx. 2,550 mm - 2 track ramps, each consisting of 1 fixed section and 1 extendable section, lateral sliding adjustment, grated surface, mechanical ramp locking with holders on outer frame for non-use (optionally with strap securing) - Ramp operation via electro-hydraulic unit, incl. emergency control at manifold block and hand pump for total system failure - Hydraulic rear supports - All hydraulic functions controlled via radio remote control - Grated floor with increased load capacity - Rear end with bevel – front bulkhead approx. 2,000 mm high with inward-bent profiles - Stainless steel toolbox inside in front of bulkhead - 2 stainless steel side toolboxes on the frame for lashing equipment (1 left, 1 right) - 1 stainless steel toolbox at rear right (for hydraulic unit and control block) - Work lights: 1 pair on rear cab wall, 2 pairs on frame sides, 2 pairs at rear Gsdpfx Ahjw E Aawe Djuk - 2 sets of steps for access to the cargo area Load securing: - Longitudinal members incl. Multi-X contour with 2.5 t lashing points - 6 pairs of 6-ton lashing points integrated into longitudinal members - Outer frame perforated with 2.5 t lashing points - 6 pairs of 6-ton lashing points integrated into the outer frame - 4 x 6-ton lashing points at the rear - 4 x 6-ton lashing points below, in front of the front bulkhead toolbox Paintwork: - Body powder coated in RAL 9005 black (KTL process) - Bulkhead painted in RAL 9005 black - Ramps and gratings hot-dip galvanized Markings: - Reflective tape on sides and rear to EU regulations. Further information available on request.

Condition: used, mileage: 1,70,066 km, power: 70 kW (95.17 HP), first registration: 11/1977, fuel type: diesel, overall weight: 6,800 kg, color: grey, gearing type: mechanical, Equipment: all wheel drive, Engine: Mercedes Benz Euro 0 KM status according to speedometer Gearbox: 8-speed manual with 16-speed reduction Seats: 1+1Trip side tipperAvoid weight 4500 KG / total weight 6.800 KGExterior trailer coupling / drawbar load 1250 KG * Power steering * Driving window with windshield * Sun visors * Roof hatch Miscellaneous Front hydraulics Front PTO * Rear PTO * All-wheel drive with locks * Hydraulic Schmidt snow blade Gsdermlpzjpfx Ah Deuk * Additional headlights * Air brake system * German vehicle documents * Vehicle dimensions: Length: 4.54m, width: 2.19m, height: 2.63m * Tires: VA: 40%, HA:30% Our internal vehicle number: 7608Errors excepted. Pictures and text may differ from the vehicle. Constantly over 180 vehicles on offer.

Year of construction: 1993, condition: used, TYPE : DEA 400/2000 Type YEAR : n.d. Year MAXIMUM SLEDGEHAMMER PRESSURE : TON. 400 Ram capacity SLIDING STROKE : mm. 1,100 Slide strok MAX VERTICAL LIGHT : mm. 1,600 Max shut height Godpfjihf R Usx Ah Djuk TABLE DIMENSIONS : mm. 2,000 x 1,600 Table size RAPID SPEED : mm/sec 650 Fast stroke TABLE PRESS CAPACITY : TON. 160 Cushion capacity PRE-MILER stroke : mm. 400 Cushion stroke HEIGHT ABOVE GROUND : mm. 5,800 Ground up to floor FRONT LIGHT : mm. 3,400 Distance btw uprights LATERAL LIGHT : mm.1,600 Lateral window

Condition: used, pressure 200 t distance between columns 1600 mm max. ram stroke 600 mm dayligth 900 mm table width 1600 mm table depth 1300 mm table height 1060 mm ram surface 1600 x 1300 mm T-slots Din 650 / 22H12 rapid traverse 400 mm/s return speed 325 mm/s pressing speed 42 mm/s bei 40% mm/sec pressing speed 20 mm/s bei 100% mm/sec die-cushion pressure 800 kN die cushion stroke 150 mm speed of die cushion auf 68/ ab 225 mm/s Guedeg S R Twjpfx Ah Dsk

Condition: used, Double column hydraulic press SMG type HBP 200 - 2000 / 2000 make no. 7.4117 year of construction 1986 - rebuild 2000 pressure force 200 ton. Gjdodzp Tcopfx Ah Dsuk Stand passage front 2050 mm column passage sideways 2030 mm table area 2800 x 2000 mm ram area 2000 x 2000 mm ram stroke 700 mm installation height max. 1850 mm Table height above floor 750 mm ram retraction force 33 ton. Rapid feed speed 500 mm/s Pressing speed 72/36 mm/s Return stroke speed 420 mm/s Safety distance 230 mm Motor power main motor 75 kW Motor power control pump 11 kW Mains connection 380 Volt, 50 Hz - 8-fold flat guide for the ram - Clamping plate with 22 mm T-slots at the ram, 2000 x 1900 mm, thickness 60 mm - Hydraulic ram locking at TDC - Measuring system with glass scale - Electrical control renewed in 2000 with SIEMENS SPS S7 - adjacent switch cabinet - 2-hand control panel adjacent - ground level installation - central lubrication - Operating instructions with circuit diagrams Space requirement of the press standing L x W x H 3700 x 2900 x 5900 mm Machine height complete with motor 5900 mm Space requirement for horizontal transport L x W x H 5900 x 3250 x 2950 mm weight 38 ton. The machine was used as a production press at Volkswagen until 2000. From 2000 the machine was used as a tool testing press in a tool shop. good condition

Condition: used, mileage: 5,90,000 km, power: 257 kW (349.42 HP), fuel type: diesel, gearing type: mechanical, axle configuration: 3 axles, overall weight: 26,000 kg, first registration: 06/2003, loading space length: 7,200 mm, emission class: euro3, color: white, Equipment: soot filter, * Mercedes-Benz 2535 Actros MP1 construction machine transporter with crane * First registration 2003 * 590,000 km * Euro 3 with green emissions sticker * 6x2 with trailing lift axle * Leaf-spring/air suspension * Double-H manual transmission * Hydraulic ramps Gjdpswqauvefx Ah Dsuk * Hiab 200C crane * Year of manufacture 2003 * 2,280 kg at 7.80 m * 4,000 kg at 4.50 m * 2x hydraulic extension * Load length: 7.40 m * Loading height: 1.20 m * Wheelbase: 5.10 m * Curb weight: 13,680 kg

Condition: used, mileage: 1,51,900 km, first registration: 07/2002, overall weight: 11,900 kg, fuel type: diesel, color: orange, axle configuration: 2 axles, gearing type: mechanical, emission class: euro3, Year of construction: 2002, Equipment: ABS, air conditioning, all wheel drive, had accident, trailer coupling, Unimog U 400 Municipal Gjdpfxoi R Ahqo Ah Douk Outfit. Municipal Mounting plate Auxiliary headlights etc. FS mounted spreader for self-installation only for sale to commercial enterprises.

Condition: new, Year of construction: 2025, working width: 2,500 mm, bending angle (max.): 125 °, sheet thickness steel (max.): 2 mm, sheet thickness aluminum (max.): 4 mm, overall weight: 1,600 kg, total length: 30,000 mm, power: 4 kW (5.44 HP), height adjustment type: hydraulic, stroke length: 270 mm, features Bending capacity of 2500 mm x 2 mm NC-89 digital programmable single angle control for angles from 0-125º Godpfx Aoq Apdush Douk Automatic cycle: after clamping, the lower bar bends to the set angle and returns, the head releases to the set position Szybka akcja szybka regulacja głowicy w celu zoptymalizowania promienia gięcia na grubości materiału 0,5-2 mm Durable construction made of steel Convertible foot pedal includes control panel for maximum flexibility High-quality components ensure reliable performance for years of continuous operation NC-89 opening height adjustment NC-89 stop clock control ensures constant bending angle Extended fingers allow bending pans or boxes to a depth of 205 mm Includes adjustable rear hand bumper, also adjustable for tapered material Mild steel performance is evaluated on hot rolled material with 250 MPA MODEL HZM 2×2500 Type of controller NC-89 Single program (mm) Bending length 2500 (mm) Mild steel bending 2 (mm) Stainless steel bending 1) Type of material attachment Hydraulic clamp Type of material bending hydrauliczne Bend angle indicator 0-125º (mm) Bumper stroke 1000 (kW / hp) Engine 2,2 / 3 (V) Voltage 230 (cm) Shipping dimensions (L x W x H) 300 x 81 x 150 (kg) Net weight 1600