Agricultural machine

Mercedes-Benz Motor OM 422, V8-Motor, 4x Vorhanden!

Condition: good (used), Swivel Spindle Milling Machine, Table Milling Machine, Bench Milling Machine Ihjdpfx Ajh Nvyzsdwot -Spindle adjustment: height and angle -Swivel: -3° to 45° -Drive: 4.5/5.5 kW -Speed: 3000/4500/6000/9000/12000 rpm -Feed apparatus Holz-Her 3 rolls -Useful shaft length: 100 mm -Spindle: Ø 30 mm -Max. Milling cutter: Ø 220 mm -Dimensions: 1540/1100/H1520 mm -Weight: 962 kg

Condition: good (used), Year of construction: 1990, cutting width (max.): 1,000 mm, cutting height (max.): 140 mm, table length: 1,400 mm, power: 5.5 kW (7.48 HP), Types:F 45 ,Machine nr:90-8-86 Isdpfx Ajtxh Nisdweht

Year of construction: 2022, condition: new, Thickness planer KD410 Weight 205 kg Voltage: 400 V - 3 phases, power (S6) 4,4 kW / 6,6 PS chip and dust extraction diameter 100 mm Planing table dimensions 600 x 410 mm Ihjdpfegx T Hhex Adwst Maximum planing height 230 mm Shaft diameter 70 mm Number of knives: 3 Maximum thickness per pass: 4 mm Speed: 5500 rpm Speed 6 m / min. Accessories: - Handwheel with indicator for thickness planer - Planer cutterhead Tersa Location: Ex stock 54634 Bitburg - immediately available -

Condition: used, Wheel diameter: 500 mm Isdpfxewl D S Uo Adwjht Storage location: Nattheim

Condition: used, REX four-sided planer, planing width 51 cm, maximum planing height 20 cm, 2 feed speeds, vertical spindles have 2 rotation speeds, electric table lifting device Ioderxf Smepfx Adwsht

Condition: good (used), Year of construction: 1969, Wood band saw, band saw machine, band saw, vertical band saw Ihjdpfoh N Thwox Adwot -Manufacturer: Hema Paul and Gotthilf Heermann, vertical band saw -Type: unfortunately without type designation -Drive: 4 kW -Cutting width: max.785 mm -Cutting height: max.475 mm -Saw band: length 5600 mm -Work table: pivoting -Drive motor with brake -Dimensions: 1600/1020/H2430 mm -Total weight: 794 kg

Condition: reconditioned (used), Year of construction: 2000, functionality: fully functional, machine/vehicle number: KK052469, Connected load 380V 4kW table size 1070 x 620 mm swiveling with hand crank 45 height adjustment with hand crank right/left rotation motor brake Ijdsiinm Hepfx Adwoht socket for feed unit Protective covers for hand milling spindle Ø 30 mm Aigner stop suction connection 2x 120 mm speeds: 1400/3500/6000/8000 rpm Instruction manual

Condition: used, Year of construction: 1975, Technical details: turning diameter over bed: 400 mm turning diameter over support: 220 mm turning length: 1100 mm centre height: 180 mm spindle passage: Ø 45 mm range of revolution per miute: 31,5 - 1.400 / 12 step U/min range of feed in x - axis: längs: 0,08 - 1,10 m/min range of feed in y - axis: quer: 0,028 - 0,40 m/min tailstock quill taper MT: MK4 tailstock quill adjustment: 200 mm total power requirement: 4,0 kW weight of the machine ca.: 1,7 t dimension machine xH: 2,5 x 1,1 x 1,4 m Equipment: -Three-jaw chuck Ø 250mm manufacturer Forkardt with interchangeable jaws -Multifix steel holder -Cooling water device with pump -chuck guard -chip collecting tray -chip guard Accessories: Iedpeu Ix E Hjfx Adweht -chuck spanner -tool holder -2 pieces gears *

Year of construction: 2023, condition: new, * Year of construction 2023 (new unit); Ihsdsl Iyyujpfx Adwjt * Primary power (PRP) 32 kVA / 26 kW; * Nominal standby power (ESP) 33 kVA / 26 kW; * Rated voltage 400V; * nominal frequency 50Hz; * with terminal strip (without sockets outside) * dimensions: 2.225 x 970 x 1.185 mm (LxWxH) - weight, without fuel: 137 kg

Condition: ready for operation (used), Year of construction: 1988, functionality: fully functional, milling spindle length: 150 mm, power: 11 kW (14.96 HP), spindle diameter: 40 mm, overall weight: 1,500 kg, Double-sided swivel unit bearings with two sturdy segment guides, modern steel construction column, heavy-walled, heavily ribbed cast iron table, replaceable milling arbor, three-phase motor with 4 speeds, electric height and tilt adjustment in rapid and creep speed, and electronic digital display, incremental dimension switching for height adjustment, milling stop with fine adjustment and metal stop jaws and replaceable aluminum splinter guards, extraction nozzles on the milling stop and below the table, each 120 mm in diameter, minimum extraction speed at the extraction nozzle: 20 m/s, rotating table insert, Ihedpfjwcpqqox Adwjt locked reversing switch for left and right rotation, lockable main switch, cam switch, automatic motor brake Table size: 1350 x 800 mm Table height: 880 mm Motor power: 11 kW MK 5 milling arbor mount Speeds 3000/4500/6000/9000 rpm Mill arbor swivel range: -5° to +45° Height adjustment: approx. 145 mm Control: CNC Table extension on both sides, total length 2500 mm, including extendable frame support Stepless 4-roller feed 2-axis control Mill arbor with 40 mm diameter and 150 mm length