Deephole boring machine

MGA 10m Deep Hole Boring Machine

Year of construction: 2016, condition: ready for operation (used), - USED - TRAVELLING COLUMN MILLING MACHINE LONGITUDINAL TRAVEL: 6000 mm TRANSVERSAL TRAVEL: 1500 mm VERTICAL TRAVEL: 2500 mm RAPID FEEDS L-T-V: 35 m/min SPINDLE: 337- 5000 rpm; 42 kW; 1180 Nm WORKTABLE: 300 x 2500 x 7000 mm HEAD: ISO 50 ; MILLESIMAL POSITIONING ; A/B AXIS AUTOMATIC TOOL MAGAZINE: PICK-UP ; 12 POS Cjdpfx Aex Ru Azsilsha CONTROL UNIT: HEIDENHAIN TNC 640 HIGH PRESSURE COOLANT: 20 Bar NOTE: AUTOMATIC HEAD CHANGE; COMPRESSED AIR INSIDE THE TOOL; RTCP; AUTOCAL SOFTWARE FOR AUTOMATIC CALIBRATION

Condition: new, functionality: fully functional, Year of construction: 2026, 20T Premium Ramp, Usable Inner Width 2,5m – TM-GROUP, the Best Choice on the Market ⭐️ Galvanized drive-on grating! ⭐️ ✅ Specifications: - Manufacturer: TM-GROUP - Maximum load capacity: 20 tons - Inner ramp width: 2500 cm - ELECTRIC and manual height adjustment from 1m to 1.6m - Galvanized drive-on grating - Reinforced side railings on both sides of the ramp - Solid rubber transport wheels - Central forklift handle for easy repositioning - Adjustable slope angle and flap height - Dual reinforced support legs - Moving parts equipped with grease fittings - Ramp also includes a hand winch ✅ Drive-On Grating: Galvanized grating with anti-slip grooves. A safe and secure surface. Both forklifts and pedestrians are ensured the best possible grip and support. Competing ramps often feature drive-on plates covered with mesh. Our product includes the grooved grating – a far more durable solution, which allows dirt to fall through and prevents forklift slipping. ✅ Forklift Handle – installable on both sides: Convenient and quick attachment point for forklifts allows ramp transportation in all directions. Specially designed handle enables maneuvering even in confined spaces. ✅ Chain for connection with trucks, wagons, or stationary warehouse ramps: A solid steel chain is another advantage of our ramp, providing extra security and preventing any unwanted shifting during loading operations. ✅ Durable side barriers: Safety railings with the option to detach and install a frame/canopy (canopy available as an option). ✅ Electric height control: Smooth electro-hydraulic drive powered by a high-quality pump. The pump operates on 230V, so it can be plugged into a standard power outlet. ✅ Dual-Action Manual Pump: Hydraulic pump for height adjustment in case there's no access to electric power – supports lifting in both directions. A reliable solution for all working conditions. ⭐️ Available Variants: ⭐️ - Drive-on widths: 1700 cm, 2000 cm, and 2500 cm in Standard, Premium, and Premium Plus options - Mobile ramps with load capacities of 10 tons, 15 tons, 20 tons, and 25 tons - Grating thickness: 3 – 5 cm - Colors: red, blue, black, and green (custom colors available upon request) - Mobile ramp with tarp covering Codpfx Ajrp En Aeiljha As a manufacturer, we can produce custom ramps based on your specific needs – various dimensions, load capacities, or special configurations. Looking for a solution you can’t find in the listings? Contact our specialist. Tags: Loading ramp, unloading ramp, dock ramp, mobile ramp, loading dock, transfer dock, mobile loading ramp, mobile transfer ramp.

Year of construction: 1998, condition: like new (used), 65 Watt YAG laser Cjdpfsd Dhw Nsx Aileha

Condition: used, Year of construction: 2008, x-travel 450 mm y-travel 400 mm z-travel 400 mm control Heidenhain Mill Plus V600 Cedpfx Aiewgi Drjlsha weight of the machine ca. 7000 kg

Condition: used, Year of construction: 2007, turning diameter 300 mm turning length 600 mm control FANUC, 18i-TB turning diameter over bed slide 230 mm travel x1 165 mm travel z1 700 mm travel x2 190 mm Cjdpfxey Tplis Aileha travel z2 720 mm travel -y axis +/- 50 mm main spindle bore 76 mm main spindle speed 5.000 U/min main spindle drive 22 kW max. torque on the spindle 208 Nm sub spindle bore 76 mm sub spindle speed 5.000 U/min sub spindle drive 22 kW max. torque on the spindle 208 Nm tool turret 2 x 12 Stat. number of driven tool stations 2 x 12 speed of driven tools 5.000 U/min max. torque 47 Nm tool taper BMT 55 C-axis resolution 0,001 ° rapid traverse x + z axis 20 / 40 m/min rapid traverse y-axis 7,5 m/min work piece power 5,5 kW total power requirement 68,4 kVA Accessories: collet fixture make KITAGAWA, CRS 66, on main spindle, hydr. 3-jaw chuck make KITAGAWA, BB 208, 210 mmø, on sub spindle, various tool holders for turret, bar loader make HYDRAFEED, model MULTIFEED MX-1B for bar dia. 3 - 80 mm and bar length up to 1650 mm, chip conveyor, coolant with belt filter device

Condition: used, Radial drilling machine CSEPEL, Type RFh 75 / 1500 Chedpfolhwr Rjx Ailsa Machine no. 13704, Year of manufacture 1985 Drilling capacity in steel: Ø 75 mm Drilling capacity in cast iron: Ø 90 mm Spindle mount: MK 5 Nominal overhang: 1500 mm Maximum overhang of the spindle: 1500 mm (to the column) Minimum overhang of the spindle: 440 mm (to the column) Distance from spindle nose to clamping surface: 370 - 1700 mm Overarm vertical adjustment: 950 mm Table size / clamping surface: 1800 x 1100 mm Column diameter: 450 mm Quill stroke: 380 mm Spindle speed: 19-1900 rpm, 21 steps Feed rate: 0.047-2 mm/rev, 12 steps Motor power: 11 kW Mains connection: 380 Volts, 50 Hz, 15 kW - Right-hand and left-hand rotation of the drilling spindle via hand lever switch - Hydraulic gear change for spindle speed and feed rate - Hydro-mechanical central clamping device - Motorized overarm vertical adjustment - Without coolant system - Machine light - Operating manual Space required: Length 2720 mm x Width 1170 mm x Height max. 3770 mm Transport height with motor on the column: 3500 mm Transport height without motor on the column: 3250 mm Weight: 6.3 tons Good condition

Year of construction: 2014, condition: good (used), For sale: a Nilfisk compact safety industrial vacuum cleaner Type CTS40 M Z22 Chodpfx Ajhu Sf Hjiloa 400 V 4 kW 9 A 50 Hz 114 kg Explosion-proof The vacuum cleaner is in good condition and ready for immediate use. Machine buying and selling WE BUY/SELL PRODUCTION AND METALWORKING MACHINES, AMONG OTHER THINGS. Do you need a high-quality, yet affordable, metalworking machine for your production? Or would you like to sell yours? For more information or to contact us, please visit our website.

Condition: good (used), Year of construction: 1999, functionality: unexamined, travel distance X-axis: 6,000 mm, travel distance Y-axis: 3,200 mm, travel distance Z-axis: 2,050 mm, total length: 13,000 mm, table length: 5,000 mm, table width: 3,000 mm, total width: 8,000 mm, spindle speed (min.): 12,000 rpm, total height: 6,000 mm, table load: 50,000 kg, overall weight: 1,20,000 kg, number of slots in tool magazine: 32, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, HEYLIGENSTAEDT HEYMUNILL 3200-P heavy-duty portal-type machining center with fixed cross beam, designed for processing large and heavy workpieces. Large working area with travel distances of X 6,000 mm / Y 5,000 mm / Z 1,500 mm, table size approximately 5,000 x 3,000 mm, and table load capacity of approx. 50,000 kg. Portal clearance approx. 3,220 mm width / 2,050 mm height. 5-axis machining / milling heads A and B axes (swivel axes in the milling head) C axis (360° rotation) Simultaneous 5-axis machining possible (with fork milling head) Milling heads: Straight milling head FK 120/340 90° angular milling head WFK 100/750M Fork milling head FK 100/2D Milling head magazine: Chodpfx Aiey Anrtjlea 5 positions automatic milling head changer Additional equipment: ICS approx. 7 bar 32-position tool changer (SK50, Fibro ATC 32/50) Tool holder SK50 (DIN 69871) Tool length measuring system (laser) Chip conveyor Coolant system Adaptive feed control Heidenhain linear measurement systems X/Y/Z

Condition: excellent (used), Year of construction: 1986, RAFAMET type KCF 400 Morę information on request Codpfoytq T Hox Ailoha

Condition: used, Technical Data Csdpfxowyn Ntj Ailjha Faceplate diameter: 1580 mm Max. turning diameter: 1700 mm Max. turning height (cross rail support): 1250 mm Max. turning height (side support): 1160 mm Max. faceplate load: 12,000 kg Max. distance from faceplate to underside of cross rail: 1210 mm Max. distance from faceplate to underside of side toolholder: 980 mm Max. distance from faceplate to underside of turret head: 1420 mm 18 spindle speeds: 2.8 – 140 rpm 18 feed rates: 0.063 – 3.15 mm/rev Total power requirement: 55 kW Required floor space approx.: 5300 x 3500 x 4100 mm Control: conventional