Machining Center - Vertical

MIKRON UM 710/900

Condition: used, Year of construction: 1997, x-travel:710 mm Iaedjlu N Hispfx Abcsp y-travel:630 mm z-travel:500 mm turning speed range - spindle:5 - 5000 1/min power - main spindle:11 kW tool taper:SK 40 tool changer:44 Werkzeuge feed:10 m/min surface area:1200 x 600 mm table load:0,5 t total power requirement:15 kVA weight of the machine ca.:4,24 t Toolchanger with 44 tools, pendant handwheel for easy setup.

Condition: excellent (used), Year of construction: 2008, TECHNICAL DATA Table Clamping surface: 1200 x 450 mm Longitudinal travel: 650 mm Cross travel: 510 mm Vertical travel: 475 mm T-slots: 6 x 18 H7 Maximum load: 400 kg Distances Between T-slots: 65 mm From spindle center to underside of counter-support: 160 mm Feeds Longitudinal feed: 0-4000 mm/min Cross feed: 0-4000 mm/min Vertical feed: 0-1500 mm/min Rapid traverse Longitudinal feed: 4000 mm/min Cross feed: 4000 mm/min Vertical feed: 1500 mm/min Spindle Taper: ISO40 / DIN2079 Speed range: 55-3000 Head, swiveling: 0-140 ° Quill Movement Quill diameter: 90 mm Quill stroke: Manual Feed: 75 mm Weight: approx. 2300 kg SCOPE OF DELIVERY Among others (not an exhaustive list): ABENE milling machine Heidenhain control Tool holder set Coolant pump Ijdpfx Abewuurwocoap Leveling feet Mounting block Complete operating documentation Exact scope of delivery according to photo documentation

Condition: used, Year of construction: 2007, machine/vehicle number: 1056795, functionality: fully functional, operating hours: 13,432 h, travel distance X-axis: 1,270 mm, travel distance Y-axis: 508 mm, travel distance Z-axis: 635 mm, number of slots in tool magazine: 24, controller manufacturer: Haas, overall weight: 6,000 kg, controller model: Haas, coolant supply: 20 bar, feed rate X-axis: 21 m/min, spindle speed (max.): 12,000 rpm, Equipment: documentation/manual, Hello,\n\nDue to business closure, the entire company is being sold.\n\nMachines are in good condition, and tools can be negotiated. Isdpfx Ajwccpajbcjap

Condition: used, Year of construction: 1969, max. wheel diameter 160,175 mm gear width 355 mm max. module 4,5 spindle bore 75 mm centre distance 410 mm min. number of teeth 2, 3 cutter diameter max. 115 mm cutter length max. 105 mm Iedpevzhf Ssfx Abcoap axis distance between cutter and workpiece - max. 138 mm axis distance between cutter and workpiece - min. 30 mm milling head -swivable 120 ° milling spindle speeds 70 - 400 U/min axial-feeds 0,25 - 4,0 mm/U radial feeds 0,09 - 1,5 mm/U total power requirement ca. 9,5 kW weight of the machine ca. 3,5 t dimensions of the machine ca. 1730x1400x1440 mm Equipment/accessories: - Interchangeable wheels - Milling arbors - Clamping devices - Documentation

Year of construction: 1980, condition: used, table length 2000 mm Iajdpfjt Hwq Rex Abcop table width 1800 mm table load 12,5 t total power requirement 10 kW weight of the machine ca. 7,5 t dimensions of the machine ca. m Table size approx. 2,000 x 1,800 mm Max. weight of workpiece, approx. 12,500 kg Table travel, longitudinal 1,250 mm Table height above floor 920 mm Longitudinal feed 0.63 - 2,000 mm/min Turning feed, with Ø 1,000 mm 1 - 3,150 mm/min Longitudinal quick feed 2,000 mm/min Turning quick feed, with Ø 1,000 mm 3,150 mm/min Weight of machine 7,500 kg External dimensions of machine 3,700 x 2,100 x 920 mm Total electrical load 10 KW - 180 V - 50 Hz Accessories / Special Features * Telescopic covers for the guides. * Infinitely variable table feed. * Optical display for setting and reading the longitudinal adjustment. * Optical display for setting and reading the angle. Condition : Satisfactory to good. Machine can be inspected under power. Delivery : Ex stock as inspected Payment : Net, after conclusion of contract Thank you for your interest.

Condition: refurbished (used), Year of construction: 2025, functionality: fully functional, machine/vehicle number: 7/61, Manufacturing origin Swiss Voltage 380/50/3 Netweight abt. 760 kg Dimensions abt. 1250x1000x1700 mm TECHNICAL DATA WORK CAPACITY Travel X and Y 200x200 mm Vertical slide travel 250 mm Travel of drilling spindle 70 mm Max free passage between table and spindle nose 330 mm Free passage between column and centre of spindle 260 mm Max drilling capacity (steel) 10 mm Max reaming capacity 50 mm TABLE Usable surface 400x300 mm Admitted load 100 kg Travels X and Y through motors Number of T-slots 6 (longitudinal) DRILLING HEAD Spindel morse taper 0 Speed of spindle 150-3000 rpm Feed of drilling spindle 0,015 mm/t PRECISION Direct reading on divided drums 0,01 mm Direct reading on verniers 0,001 mm Guaranteed precision on displacement of slide-way 0,002 mm MEASURE Measuring system direct, optical Elements of measure graduated rule, div.1mm Read-out projection screens Shifting of zero-point yes Direct read-out 0,001 mm Guaranteed positioning precision 0,002 mm Installed power 1,2 kW errors and omissions excepted data given without obligation Inventory Nr.2160006, machine equipped with : Iodpfxod Amgko Abceap 1 turning table Ø 220 with optical measure 1 centering microscope with 3-points suspension, zoom 40x, lightening 1 centering device with dial comparator cap. 3 mm. MT0 1 centering point MT0 1 tracing tool with spring-mounted point MT0 1 center punch MT0 1 chuck for centering drills MT0 1 self clamping drill-chuck 0-5 mm., MT0 1 boring head type 0, cap. 0.5-30 mm., MT0 1 levelling foot with 2 round levelling supports

Condition: excellent (used), functionality: fully functional, Year of construction: 2019, operating hours: 634 h, control type: CNC control, controller model: CN DELEM T3500T, bending force (max.): 100 t, working width: 3,060 mm, stroke length: 350 mm, distance between stands: 3,384 mm, installation height: 500 mm, type of crowning: CNC-controlled, TRUMPF TRUBEND 3100 Press Brake (X) Version with Increased Clearance to 500 mm Only 634 hours powered on! Protective laser CNC crowning table DELEM T3500T CNC control CNC axes: Y1/Y2/X/X2/R/Z1/Z2 Iaedpox E Ag Defx Abcsp Year: 2019 Currently tooled for a bending length of 2550 mm 1 die (V6 mm) with a length of 2550 mm included as additional equipment. MACHINE NOT ANCHORED TO FLOOR Specifications Bending length: 3060 mm Capacity: 100 tons Frame gap: 3384 mm Ram stroke: 350 mm Motorized backgauge travel: 560 mm Distance table-to-ram: 500 mm Main drive power: 24 KVA Weight: 8,300 kg Machine dimensions (L x W x H): 3,607 x 1,644 x 2,800 mm

Condition: ready for operation (used), Year of construction: 1990, functionality: fully functional, For sale due to closure of an artisan bakery: A WP bread roll system built in 1995, preceded by a WP Multimatic, hanging (proofer) + a WP stamping station. Please note that the system must be dismantled by the customer. Iaodpfx Abeuqw Drscsp

Condition: used, Year of construction: 1990, x-travel 400 mm y-travel 330 mm z-travel 350 mm total power requirement 6,3 kW weight of the machine ca. 2 t dimensions of the machine ca. 736 m Iaodpfjt Hxbwsx Abcep

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, 🚨 FOR SALE: 2x Kardex XP500 Machines – Top Condition! 🚨 For sale for removal. We are building a new warehouse and do not require these units. In good condition, recently serviced, well maintained throughout the time we have owned them. Price is per unit, negotiable. Shelves can be easily reconfigured to accommodate different product types / sizes. Bins can be sold with machines if desired. Machines are currently configured for dual tray presentation. Also includes 10-bay Kardex SortBench. Details: Model: Kardex XP500 Quantity Available: 2 units Condition: Well-maintained and fully operational Iedpfx Abevuvbzocsap Key Features: High-density storage to maximize space utilization Fast and reliable picking system for enhanced productivity Built for heavy-duty industrial applications Ergonomic design to improve workplace safety Energy-efficient operation Why Kardex XP500? These machines are perfect for businesses looking to improve efficiency, save floor space, and boost order-picking accuracy. Location: The units are currently stored in Wanganui, New Zealand.