Sludge decanter

Minobra 10 y 20 m diametro.

Year of construction: 2022, condition: new, ZIM T 1210 machine is designed to increase efficiency for production of manholes, conics and rings. It’s production capacity is very high when you compare with the ordinary machines. It has uniqe specifications to increase production capacity, using life, products quality. This machine can produce pipes 300mm – 1200mm diameter and 1000mm height. Machines can be designed semi or full automatic according to requirements. We use SIEMENS brand PLC microprocessors on automatic machines. There is mortar bunker and mortar filling cart on machines. We use inner filling system for mortar filling cart and it makes equal and fast filling to moulds. Hnodpfeirtdpsx Adwjg Production is done on production pallets, This production pallets should wait till the products dry and it takes around 24 hours if there is no curing system. The vibration system of machine is controlled by frequency driver controll system. It does not need any mechanic settings. It can easily adjusted from operator pannel. The vibrator system specially designed by our R&D team is used in our machines. The cooling of the vibrators are done by oil cycle system. There is a special unit for that cycling process. Oil flow is controlled by special sensors. Thanks to this technology our machines which have been working for many years without any problems, stand out with their low operating costs. Special designed strong chassis of the machine enables long life production without errors. Produced materials can be carried to drying area with carriage carts or forklifts. The products can be carried to drying area with carriage carts or forklifts.

Condition: good (used), Year of construction: 2000, Manufacturer: KUKA Tip: KR 350/2 Hodpfjh Dwr Uox Adwjng Year of manufacture: 2000 Net weight: 1870 kg Without cable and control cabinet. Addendum to the measurement report!

Condition: good (used), Robot Manfacturer: Staeubli Hodobrhtdopfx Adwsng Type: RX170

Condition: good (used), Year of construction: 2003, Manufacturer: KUKA Type: KR 210 L 180 Year of manufacture: 2003 Hedjh Dw Dqspfx Adweng Maximum load capacity: 150 kg

Year of construction: 2022, condition: new, ZIM T1200 machine can produce pipes 300mm – 1200mm diameter and 500mm – 2500mm height by single, double and triple pressing. 150mm and 200mm pipes also can be produced for special demands. Machines can be designed semi or full automatic according to requirements. Hedpfx Asibbikodwong We use SIEMENS brand PLC microprocessors on automatic machines. There exists motrar bunker and motrar filling systems on machines. Produced materials can be carried to drying area with carriage carts or forklifts. Production is done on production pallets, Materials up to 800mm diameter are carried to drying area with carriage carts, pipes bigger than 800 mm diameter can be carried with forklift. For fast production, pipes bigger than 300mm diameter also can carried to drying area with forklift. Machine makes production by hydraulic press and vibration. Vibration system of the machine is special design of ZIM Engineers. Vibration system which have oil cooling system and special oil unit. This system can be controlled electronically. Special designed strong chassi of the machine enables long live producing without errors.

Condition: reconditioned (used), Year of construction: 2011, functionality: fully functional, machine/vehicle number: M-900iA/260L R-30iA, load capacity: 260 kg, arm reach: 3,100 mm, controller manufacturer: Fanuc, controller model: R-30iA, teach pendant manufacturer: Fanuc, Equipment: documentation/manual, IRS Robotics® Refurbished Industrial Robot 100% complete and fully functional: robot arm, controller, all cabling and teach pendant. Includes our warranty and a detailed 77-Point Protocol evaluation performed by our in-house robotics engineers. Brand: FANUC Type: M-900iA/260L Controller: R-30iA Payload: 260 kg Reach: 3.1 m General purpose: Heavy Duty Long Arm Hnedpjp T Umqjfx Adwsg Robot mass: 1800 kg Delivery time: By mutual agreement IRS Robotics® refurbished: 77-Point Protocol – thoroughly tested on our test benches, new oil/grease, new batteries, fully cleaned, painted in your preferred RAL color. Includes Accuracy Status Measurements (repeatability, accuracy, backlash) About: Our daily trusted business is the delivery of refurbished A-Brand robots: ABB – KUKA – FANUC – YASKAWA. Established 2002. We ship worldwide.

Year of construction: 2022, condition: new, ZIM A3600 machine can make concrete pipe, square culvert and other concrete materials between 800mm-3600mm diameter and 2000mm-3500mm lenght. In this machines mortar stocking and filling operations are done by mortar conveyor band with bunker. Materials which produced in this machine are transferred to drying area via crane. Our machine is making production on steel pallets. Produced material is carried to drying area with outer mould. After discharging the ready material to drying area, outer mold is movingto main machine for new production. Our Machine is working with hydraulic press and vibration systems. Vibration system of the machine is special design of ZIM Engineers. Hnsdjibbigjpfx Adwog Vibration system which have oil cooling system and special oil unit. Special designed strong chassi of the machine enables long live producing without errors. Vibration table is made on high precision CNC machines.

Year of construction: 2001, condition: ready for operation (used), A paving stone production line Omag, which has been continuously optimized and upgraded to the latest technical standards, is available. Overhauls: 1) Conversion for an additional hydraulic unit for additional load in 2020. 2) Conversion to servo-vibration with Siemens S7 control in 2016. 3) Conversion to digital path measurement of mould and ram in 2017. 4) New core filling carriages in 2017. Plant components: 1) Board destacker and board stacker including roller conveyor. 2) Board feeder (advance) and board conveyor (scraper) to the lifting frame. 3) Board turner. 4) Horizontal and vertical bundling units Ridder & Signode, years of manufacture: 1994 and 1983. 5) Trafo lifting platform including motors and without control, year of manufacture: 1983. 6) Doppler including hydraulic unit, year of manufacture: 2004. 7) Stone packer Omag K1400 including hydraulic unit, year of manufacture: 1997. The line has no base boards. 8) Stone finisher Omag S22 140-90, year of manufacture: 2001. Documentation available. An on-site inspection is possible. Hjdpfew R Uzisx Adwjng

Condition: good (used), Year of construction: 2006, functionality: fully functional, load capacity: 150 kg, arm reach: 2,700 mm, Model: KR150-2 2000 (Foundry Option is also available) Condition: USED Year: 2006 Hodpfsq A Uq Uex Adwjng Controller Cabinet: KRC2 ed05 Included: Manipulator + KRC2 ed05 Control Cabin + All Wire Sets + Teach Pendant (Gripper & The base are not included) - FULL SET Please get in touch with us for a quote and also the refurbishment options. As PLC Merkezi EOOD, we have more than 300 robots in our inventory and deal with the brands of KUKA, ABB, FANUC and Motoman.

Condition: used, Year of construction: 2013, overall weight: 2,375 kg, load capacity: 360 kg, controller model: KRC4, Equipment: documentation/manual, Scope of delivery/accessories: Hnsdpfx Adjtr E Sgowjg Mechanics, switch cabinet, control panel, cable