CNC Turning- and Milling Center

MORI SEIKI NL1500SY / 500

Condition: good (used), Year of construction: 2008, Parts shown by hand not come. Kdodpfx Aaexhg Eyedew

Year of construction: 2005, condition: excellent (used), HYUNDAI-KIA SMART TURN SKT 250MS CNC LATHE MAKE HYUNDAI KIA, MADE IN SOUTH KOREA MODEL SKT 250 MS YEAR 2005 CONTROL FANUC 18 IT SWING OVER BED 620.0 mm SWING OVER CROSS SLIDE 400.0 mm MAX TURNING DIA 410.0 mm MAX WORK LENGTH 700.0 mm TRAVEL X AXIS: 290.0 mm Z AXIS: 750.0 mm B AXIS 700.0 mm RADPI FEEDS X AXIS: 20 m/min Z AXIS: 24 m/min B AXIS 20 m/min SPINDLE SPEED 3,500 RPM SUB SPINDLE SPEED 4,000 RPM SPINDLE NOSE A2-8 SUB SPINDLE NOSE A2-6 SPINDLE POWER 18.5/22 kW SUB SPINDLE POWER 7.5/11 kW BAR DIA 82.0 mm BAR DIA SUB SPINDLE 65.0 mm TURRET 12 STATIONS PLUS C AXIS Kodpep T Ulzefx Aadsdw B AXIS PARTS CHATHCHER TOOL SETTING PROBE SWARF CONVAYOR

Year of construction: 2021, condition: as good as new (ex-display), Highlights: - Powerfull motorizied spindle 16.000 U/min | 206 Nm - Hydraulic clapming for fixtures - Latest Machine Generation Basic machine G640 Work area travel range: X = 1.050 mm, Y = 800 mm, Z = 1.050 mm Power supply 400 V, 50 Hz, TN-S Decentralized work area mist collector Machine cooling system with an air-cooled cooling unit Machine control series FANUC 31i-MODEL B Plus Cycle package for measuring probes (RENISHAW) Control panel to enter tool data at tool loading and unloading position Rotary table with GROB pallet clamping system (B-axis) Motorized spindle HSK-A 63, 16,000 rpm, 159/206 Nm, 25/32 kW, oil-air lubrication GROB spindle diagnostics GSD Single disc-type magazine HSK-A 63 with 50 pockets Tool cleaning device Electromechanical tool breakage detection device Twin palette changer Setup station driven by a three-phase servomotor Setup station door, manually-operated, for manual loading/unloading Additional control panel Pallet 630 x 630 mm, T-slots Equipping the pallet with 12 fluid connections Scraper-type conveyor, discharge height 1,100 mm High-pressure cutting fluid system (23 bar, ICS) Compressed air feed through spindle center External compressed air supply via a flexibly adjustable hose Cutting fluid recirculation on the weekend Flush gun at the work area Air gun at the work area Part clamping system in work area, customer-specific Hydraulic power unit for the part clamping system KP1: Pressure oil, proportional valve technology, 30-190 bar (H2.1) KP2: Pressure oil, proportional valve technology, 30-190 bar (H2.1) KP3: Pressure oil, proportional valve technology, 30-190 bar (H2.1) KP4: Pressure oil, proportional valve technology, 30-190 bar (H2.1) KP5: Pressure oil, manual pressure reduction, 30-200 bar (H1.1) KP6: Pressure oil, manual pressure reduction, 30-200 bar (H1.1) Kdodpfx Aaslaugasdew Cooling unit for hydraulic proportional valves Part clamping system in setup station of pallet changer, customer-specific KP1: Pressure oil, proportional valve technology, 30-190 bar (H2.1) KP2: Pressure oil, proportional valve technology, 30-190 bar (H2.1) KP3: Pressure oil, proportional valve technology, 30-190 bar (H2.1) KP4: Pressure oil, proportional valve technology, 30-190 bar (H2.1) KP5: Pressure oil, manual pressure reduction, 30-200 bar (H1.1) KP6: Pressure oil, manual pressure reduction, 30-200 bar (H1.1) KP7: Compressed air, seating check system (P2.1) KP8: Compressed air, seating check system (P2.1) KP8: Compressed air, seating check system (P2.1) KP10: Compressed air, seating check system (P2.1) KP11: Compressed air, manual pressure regulation, 0.5-5 bar (P1.1) KP12: Compressed air, manual pressure regulation, 0.5-5 bar (P1.1) Touch probe Renishaw RMP60 12-month warranty

Condition: new, Year of construction: 2025, Spray-flood cleaning plant - Parts cleaning plant Washing (600 litres) + rinsing (430 litres); electrically heated; Cleaning process can be carried out by spraying, flooding (injection flood cleaning) and ultrasonic action. basket can stand, swivel or rotate during the cleaning process (preselectable via the program) Drying with hot air and vacuum drying Basket useful dimensions: LxWxH 600x400x300h mm max. loading weight: 150kg loading table in front of the unit included control: Siemens S7-1200 with 20 programs Kdjdpfjhu Sg Isx Aadew

Condition: excellent (used), functionality: fully functional, turning length: 530 mm, turning diameter over cross slide: 620 mm, turning diameter: 260 mm, spindle motor power: 15,000 W, spindle speed (min.): 35 rpm, spindle speed (max.): 3,500 rpm, spindle bore: 80 mm, travel distance X-axis: 195 mm, travel distance Y-axis: 100 mm, travel distance Z-axis: 590 mm, rapid traverse X-axis: 12 m/min, rapid traverse Y-axis: 10 m/min, rapid traverse Z-axis: 15 m/min, Mori Seiki SL-25Y/500 CNC LATHE With 1.5m LNS bar feeder Control: Mori Seiki MF-T6 Tool holders: (2) Radial live tolls (2) Axial live tools (4) inside tool holders (4) outside tool holders Swing over bed: 815 mm (32.1″) Swing over cross slide: 620 mm (24.4″) Distance between centers: 620 mm (24.4″) Max. turning diameter: 260 mm (10.2″) Max. turning length: 530 mm (20.9″) X-axis travel: 195 mm +130 +65 (7.7″ + 5.1″ + 2.6″) Z-axis travel: 590 mm (23.2″) Y-axis travel: 100 mm ±50 (3.9″ ± 2.0″) Spindle speed range: 35 – 3,500 RPM Spindle nose: JIS A-8 Through spindle hole diameter: 80 mm (3.1″) Spindle bearing inner diameter: 130 mm (5.1″) Number of tool stations: 12 Shank height for square tool: 25 mm (1.0″) Shank diameter for boring bar: 50 mm (2.0″) Turret indexing time: 0.25 sec Rotary tool spindle speed: 100 – 2,000 RPM Rotary tool cutting capability: End mill max Ø20 mm, Face mill max Ø50 mm, Tap max M12 Rapid traverse rate:   X-axis: 12,000 mm/min (472.4 IPM)   Z-axis: 15,000 mm/min (590.6 IPM)   Y-axis: 10,000 mm/min (393.7 IPM) Feed per revolution:   X-axis: 0.001 – 342 mm/rev   Z-axis: 0.001 – 342 mm/rev   Y-axis: 0.001 – 500 mm/rev Jog feedrate: 6,000 mm/min (236.2 IPM) Tailstock travel: 403 mm (15.9″) Tailstock spindle diameter: 110 mm (4.3″) Tailstock spindle travel: 100 mm (3.9″) Tailstock taper: MT-5 (Live center) Spindle motor power (30 min/cont): 15/11 kW (20/15 HP) Rotary tool spindle motor: 3.7/2.2 kW (5/3 HP) Electrical power supply: 44 kVA Coolant tank capacity: 100 liters (26.4 gal) Kdodpfx Asw Ett Ijadsw Machine height: 2,060 mm (81.1″) Floor space: 3,183 × 1,799 mm (125.3″ × 70.8″) Machine weight: 5,400 kg (11,900 lbs)

Condition: like new (used), Year of construction: 2019, operating hours: 3,000 h, TECHNICAL DATA Spindle hours: 3,000 h Dimensions and Weights Machine length: 6,452 mm Machine width: 2,900 mm Machine height: 3,271 mm Weight: 25,700 kg Electrical Specifications Operating voltage: 400 V Mains frequency: 50 Hz Control voltage: 230 V Maximum connected load: 54 kVA Rated current: 77 A Main fuse: 100 A Travel Paths X-axis: 800 mm Y-axis: 1,020 mm Z-axis: 970 mm A-axis: -185° – 45° B-axis: 360° Rapid Traverse X-axis: 65 m/min Y-axis: 50 m/min Kjdpfowwl Sajx Aadodw Z-axis: 80 m/min A-axis: 25 rpm B-axis: 50 rpm Spindle Maximum speed: 30,000 rpm Spindle taper: HSK-A63 Tool Magazine Number of tool stations: 140 Type: HSK-A63 SCOPE OF SUPPLY Includes (not an exhaustive list): - Grob G552 CNC machining center - Heidenhain TNC 640 - Minimax CO2 high-pressure - Fire suppression system - Knoll KF 600E/2600 - Coolant system - Camfil oil mist separator - Bielomatik central lubrication system - Liquidtool - Probe system - Set of HSK-40 toolholders - Complete operating documentation The exact scope of supply as per photo series Top Offer: GROB G552 Machining Center – As-new Condition & Fully Equipped For sale is a GROB G552 machining center in impeccable condition – used solely for test purposes and therefore virtually as-new. This machine combines the highest precision, reliability, and quality from GROB, and also comes with an exceptionally comprehensive range of optional equipment rarely seen elsewhere. Equipment Highlights: - Minimax CO₂ high-pressure fire suppression system – maximum operational safety - KNOLL KF 600E/2600 coolant system – ensures consistent machining quality even for demanding applications - Camfil oil mist separator – for clean air and a safe working environment - Bielomatik central lubrication system – for optimal maintenance intervals and long service life A rare opportunity for discerning users! Further Advantages: - Machine is installed and fully functional - Inspection under power possible by appointment - Perfectly suited for companies wishing to start production immediately – without compromise on quality or features Conclusion: If you are looking for the very best that GROB machining centers have to offer – in as-new condition and with high-end accessories – this is your opportunity. Please contact us for further information or to arrange a viewing appointment. No liability will be assumed for the accuracy, completeness, or currency of the information provided.

Year of construction: 2011, operating hours: 23,747 h, condition: ready for operation (used), General Data Machine weight 5650 Control Unit Brand FANUC Kedown N Rbopfx Aadsdw Model 31i Model A Main Drive Spindle speed range 6000 Spindle motor power 11/7.5 kW Turret Number of turrets 2 Number of tool slots 12 Media Chip conveyor Yes Additional Equipment TOP AUTOMAZIONI FU 342 bar loader This 3-axis NAKAMURA-TOME WT-100 was manufactured in 2011. It features a CNC FANUC 31i Model A, turning length of 503 mm, and a maximum turning diameter of 190 mm. The machine includes two motorized turrets with 12 tools each, a bar capacity of 42 mm, and a TOP AUTOMAZIONI FU 342 bar loader. If you are looking to get high-quality turning capabilities, consider the NAKAMURA-TOME WT-100 machine we have for sale. Contact us for more information. Application Types Turning

Condition: good (used), Year of construction: 2007, Parts shown by hand not come. Kdjdpfxevm Hgrs Aadsw

Condition: like new (used), Year of construction: 2010, functionality: fully functional, travel distance X-axis: 9,000 mm, travel distance Y-axis: 4,000 mm, travel distance Z-axis: 1,000 mm, CME TRAVELING COLUMN MILLING / BORING MACHINE CME TECHNICAL FEATURES - VISIBLE IN OPERATION Brand: CME Kjdpfsu R Rk Hjx Aadodw Model: MB 9000 Year: 2007 CNC: Siemens Sinumerik 840D X-axis: 9000 mm Y-axis (Vertical): 4000 mm Z-axis: 1000 mm W-axis (Ø 150 mm): 700 mm 2 rotary translation tables (linear travel: 2000 mm) 2500 x 2500 mm (25 TN) capacity Heidenhain optical scales on all axes Direct spindle 90-position tool change ZF range change Internal coolant Chip extractors

Condition: used, Year of construction: 2007, number of spindle speeds 6.000 U/min tool taper BT50 numbers of positions in the tool changer 121 control FANUC31iMA Milling machining centers - horizontal | TOYODA - FH630SX equipped with ITC and chip conveyor. Additional equipment: + Full NC table 360.000 * 0,001 deg The machine is in a well-maintained condition. Kdodpfx Ajt I Ec Deadow Technical data of the machine will follow soon. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: FH 630SX | FH630 | FH-630 | FH 630 SX