Used 1H 65 Cylinder Head for sale (24,103)

Condition: new, Year of construction: 2025, control type: NC control, actuation type: hydraulic, number of rollers: 4, roller (bottom) diameter: 400 mm, roller (top) diameter: 400 mm, side roll diameter: 300 mm, roller length: 3,100 mm, sheet thickness (max.): 30 mm, STANDARD EQUIPMENT * The bottom, top, and side rolls move linearly up and down via hydraulic cylinders connected to the frame * Protected against overload * Top and side rolls are driven by hydromotor and planetary gearbox (3-roll motor drive) * The positions of the rolls can be easily read via three digital displays Dsdpfx Aow Sl T Sofpjun * Thanks to a hydraulically opening head and an automatically lifting shaft, bent workpieces can be easily removed * Very easy operation with mobile control panel * Welded steel construction frame * SAE 1050 (CK 50) induction-hardened, forged or rolled steel shafts * Cone bending device * Centralized lubrication system * Hydraulic balancing system for parallel movement of rolls (Ø280 – 320 – 350 – 380 – 400 – 460) * Electronic balancing system (Ø500 – 550 – 580 – 620 – 680) * Dual-speed working system OPTIONAL EQUIPMENT * Automation via NC and CNC control * Top crane (elevator) support for large diameter bending * Hydraulic side supports for large diameter bending * Hydraulic sheet extraction system * Ground and polished rolls for special applications * Stepless speed adjustment system * Electronic balancing system for parallel roll movement (Ø280 – 320 – 350 – 380 – 400 – 460) TECHNICAL SPECIFICATIONS Bending Length: 3100 mm Pre-bending: 20/25 mm Bending Capacity: 25/30 mm Top & Bottom Roll: 400 mm Side Roll: 300 mm Motor Power: 38.5 kW Bending Speed: 1.5 – 5 m/min Length: 5850 mm Width: 2250 mm Height: 2350 mm Weight: 20,200 kg

Condition: new, Year of construction: 2025, control type: NC control, actuation type: hydraulic, number of rollers: 4, roller (bottom) diameter: 550 mm, roller (top) diameter: 550 mm, side roll diameter: 450 mm, roller length: 3,100 mm, sheet thickness (max.): 50 mm, sheet thickness steel (max.): 50 mm, power: 70 kW (95.17 HP), warranty duration: 12 months, Equipment: emergency stop, foot remote control, hardened rollers, swiveling upper roller, STANDARD EQUIPMENT * The bottom and side rolls move up and down linearly via hydraulic pistons attached to the frame * Protected against overloading * The top and side rolls are driven by hydromotors and planetary gearboxes (all 3 rolls are motor-driven) * Easy roll position reading via three digital indicators * Easy removal of bent parts thanks to hydraulically opening head and automatically lifting shaft * Very user-friendly operation with the mobile control panel * Welded steel construction frame * SAE 1050 (CK 50) induction-hardened, forged or rolled steel shafts * Cone bending system * Centralized lubrication system * Hydraulic balancing system for parallel movement of rolls (Ø280 -320 -350 -380 -400 -460) * Electronic balancing system (Ø500-550-580-620-680) * Dual-speed operation system OPTIONAL EQUIPMENT * NC and CNC control for automation * Top crane (elevator) for support when bending large diameters * Hydraulic side supports for large diameter bending * Hydraulic sheet ejector system Duodpfx Afsxbzptjpen * Polished and ground rolls for special applications * Infinitely variable speed adjustment system * Electronic balancing system for parallel roll movement (Ø280 -320 -350 -380 -400 -460) TECHNICAL SPECIFICATIONS Bending Length : 3100 mm Pre-bending : 50/40 mm Bending : 40/35 mm Top & Bottom Roll : 550 mm Side Roll : 450 mm Motor Power : 70 kW Bending Speed : 1 - 4 m/min Length : 6750 mm Width : 2900 mm Height : 2950 mm Weight : 47,000 kg

Condition: new, Year of construction: 2024, pipe diameter (max.): 65 mm, bending angle (max.): 190 °, bending radius (max.): 250 mm, total length: 4,950 mm, total width: 1,250 mm, total height: 1,600 mm, warranty duration: 12 months, sheet thickness aluminum (max.): 3 mm, sheet thickness steel (max.): 3 mm, MAXIMUM CAPACITY : Ø65X3MM MAXIMUM BENDING RADIUS : 250MM DEGREE OF TWIST : 190 DEGREE WORKING LENGTH : 3000MM MOTOR POWER : 15.5KW LENGTH : 4950MM WIDTH : 1250MM HEIGHT : 1600MM BENDING SPEED : CHANGEABLE Dedpfxju Hi Rqe Afpeun STANDARD FEATURES One set of bending molds in the dimensions required by the customer Servo Motorized Feed Axis Servo Motorized Rotation Axis Automatic Mailing of Detailed Work Report Servo Bending Axis (SFB 38-CNC/R1) Gearbox Driven Bending System (51-65-76-90) CNC Control Unit with mobile 21" color screen 3D Simulation Twisting Displaying Daily, Weekly and Monthly Total Production Amount Calculating the total length of material to be used Calculate the estimated bending process time Convert X-Y-Z data to Y-B-C Getting remote assistance Portable foot pedal with emergency stop Manual - Automatic Twisting Bending with - Without Bending Safety plate with switch behind the bending head Automatic headstock lubrication system (SFB 38 CNC/R1) Hydraulic Crimping Hydraulic Malafa Hydraulic Stop Hydraulic Oil Cooler Hydraulic Linear Slider system Hydraulic Clamp Electrical panel safety lock and keyed panel lock Electric Panel Cooler Protected Against Overload

Condition: new, Year of construction: 2025, control type: NC control, actuation type: hydraulic, number of rollers: 3, roller (bottom) diameter: 250 mm, roller (top) diameter: 250 mm, side roll diameter: 200 mm, roller length: 1,550 mm, working width: 1,550 mm, sheet thickness (max.): 15 mm, sheet thickness steel (max.): 15 mm, power: 7.5 kW (10.20 HP), warranty duration: 12 months, STANDARD EQUIPMENT * Side rolls move up and down orbitally via hydraulic pistons * Protected against overloading * All rolls are driven by hydromotors and planetary gearboxes * Easily removable bent parts thanks to a hydraulically opening top roll * Very easy operation with movable control panel * Lower roll positions are easily read via two digital displays * Welded steel frame construction * SAE 1050 (CK 45) induction-hardened, hot-rolled steel shafts * Conical rolling system with roller bearings * Hydraulic synchronisation system for parallel movement of shafts * Extended shaft ends to allow mounting profile and pipe bending rolls OPTIONAL EQUIPMENT * Top crane (elevator) for large diameter bending support * Hydraulic side supports for large diameter bending * Specially ground and polished rolls for custom work * Bending rolls for profiles * Infinitely variable hydraulic speed adjustment * Electronic synchronisation system for parallel movement of shafts TECHNICAL SPECIFICATIONS Bending Length: 1550 mm Pre-bending: 10/12 mm Bending: 12/15 mm Dusdpfxjxbzr Us Afpjn Top & Bottom Roll Diameter: 250 mm Side Roll Diameter: 200 mm Motor Power: 7.5 kW Bending Speed: 5 m/min Length: 3500 mm Width: 1200 mm Height: 1370 mm Weight: 3600 kg

Condition: new, Year of construction: 2025, control type: CNC control, degree of automation: automatic, actuation type: electric, pipe diameter (max.): 65 mm, pipe length (max.): 3,000 mm, tube wall thickness (max.): 3 mm, bending angle (max.): 190 °, bending radius (max.): 250 mm, number of axes: 5, warranty duration: 12 months, Equipment: CE marking, documentation/manual, emergency stop, foot remote control, STANDARD EQUIPMENT • 3 sets of dies (1 set of rolling die and 2 sets of bending dies, or 3 sets of bending dies, according to required dimensions) • 5-axis servo control (Y, B, C, H, V) • Servo motor-driven feeding axis • Servo motor-driven rotation axis • Servo motor-driven bending axis • Servo motor-driven H and V axes • 21” TFT touchscreen mobile CNC control unit • Rolling capability • 3D bending simulation • Collision simulation • Daily, weekly, and monthly total operation status reports • Calculation of working material length • Calculation of estimated bending time • Conversion from X-Y-Z to Y-B-C • Mobile foot pedal with emergency stop feature • Remote assistance • Bending with or without mandrel • Safety plate behind the bending head • Hydraulic clamping Dsdpoxircgjfx Afpeun • Hydraulic mandrel • Hydraulic support • Hydraulic linear slide system • Hydraulic claw clamp • Electrical panel safety lock and main switch panel lock • Electrical system cooler • Overload protection • Automatic dispatch of detailed operation reports OPTIONAL EQUIPMENT (Not included in price) • Additional die sets • Safety mat (750 x 1000 mm) • Safety mat (1000 x 1500 mm) • Hydraulic oil heater • Additional mandrel length (up to 6 m, priced per meter) • Ball mandrel and wiper die set • Automatic mandrel lubrication system (for suitable tube diameters) • Hydraulic oil cooler CAPACITY MB-65 CNC/5 AXIS Maximum capacity mm: Ø65x3mm Maximum bending radius mm: 250mm Maximum bending angle °: 190° Hydraulic pressure bar: 50-200 Working length mm: 3000 Rotation tolerances: Adjustable Bending power kW: 22.5 Dimensions LxWxH mm: 6350x1400x1600 Weight kg: 3950

Condition: new, Year of construction: 2025, control type: NC control, actuation type: hydraulic, number of rollers: 4, roller (bottom) diameter: 250 mm, roller (top) diameter: 250 mm, side roll diameter: 200 mm, roller length: 2,050 mm, sheet thickness (max.): 12 mm, STANDARD EQUIPMENT - Highly suitable for bending light and medium sheet, aluminum, or stainless materials - Highly suitable for bending round materials and materials of various diameters - Bottom and side rolls are hydraulically driven up and down with direct linear movement - Protected against overloading Dedjw Slxzepfx Afpoun - The top roll is driven by an electric motor and planetary gearbox. The bottom roll is driven by a cardan coupling system. Two rolls are driven - Position of the rolls can be easily read with three digital indicators - The hydraulically opening head allows easy removal of the bent workpiece - Very easy operation with a movable control panel - Welded steel construction body - SAE 1050 (CK 45) induction-hardened forged or rolled steel shafts - Conical bending system - Hydraulic balancing system for parallel movement of the rolls - Complies with EU safety standards and has CE marking - User manual OPTIONAL EQUIPMENT - Remote support with NC control - Top crane (lift) for supporting large diameter bending - Hydraulic side supports for supporting large diameter bending - Ground and polished rolls - Dual speed adjustment system - Stepless speed adjustment - Hydro-motor driven rotation - Ejector system TECHNICAL SPECIFICATIONS Bending Length: 2050 mm Pre-bending: 8/10 mm Bending: 10/12 mm Top & Bottom Roll: 250 mm Side Roll: 200 mm Min. Bending Diameter: 375 / 1250 mm Motor Power: 7.5 + 1.5 kW Bending Speed: 5 m/min Tank Capacity: 40 L Length: 4000 mm Width: 1500 mm Height: 1370 mm Weight: 5350 kg

Condition: new, Year of construction: 2025, control type: NC control, actuation type: hydraulic, number of rollers: 4, roller (bottom) diameter: 460 mm, roller (top) diameter: 460 mm, side roll diameter: 380 mm, roller length: 4,100 mm, sheet thickness (max.): 25 mm, power: 38.5 kW (52.35 HP), STANDARD EQUIPMENT * The lower, upper, and side rolls move linearly up and down via hydraulic pistons attached to the frame * Protected against overload * Upper and side rolls driven by hydromotor and planetary gearbox (all three rolls are motor-driven) * The position of the rolls can be easily read via three digital displays * Thanks to the hydraulically opening head and automatically lifting shaft, the bent workpiece can be easily removed * Very easy operation with a movable control panel * Welded steel construction body * SAE 1050 (CK 50) induction-hardened, forged or rolled steel shafts * Cone bending system * Centralized lubrication system * Hydraulic balancing system for parallel movement of the shafts (Ø280 -320 -350 -380 -400 -460) * Electronic balancing system (Ø500-550-580-620-680) * Dual speed operating system OPTIONAL EQUIPMENT * NC and CNC control automation * Overhead crane (elevator) for support during large diameter bending * Hydraulic side supports for large diameter bending * Hydraulic sheet removal system * Ground and polished rolls for special applications * Infinitely variable speed adjustment system * Electronic balancing system for parallel movement of the shafts (Ø280 -320 -350 -380 -400 -460) TECHNICAL SPECIFICATIONS Bending Length: 4100 mm Pre-bending Thickness: 16/20 mm Bending Thickness: 20/25 mm Upper & Lower Roll Diameter: 460 mm Side Roll Diameter: 380 mm Motor Power: 38.5 kW Bending Speed: 1.5 - 5 m/min Length: 6950 mm Dujdsw Sl I Nopfx Afpon Width: 2300 mm Height: 2350 mm Weight: 29,500 kg

Condition: new, Year of construction: 2025, control type: NC control, actuation type: hydraulic, number of rollers: 4, roller (bottom) diameter: 350 mm, roller (top) diameter: 350 mm, side roll diameter: 260 mm, roller length: 2,550 mm, sheet thickness (max.): 25 mm, STANDARD EQUIPMENT * Lower, upper, and side rolls are hydraulically actuated and move linearly up and down via body-mounted pistons * Protected against overload * Upper and side rolls are driven by hydromotors and planetary gearboxes (3-roller motor drive system) * Positions of the rolls can be easily read via three digital displays * The hydraulically opening head and automatically upward-moving shaft make it easy to remove the bent workpiece * Extremely easy operation with the mobile control panel * Welded steel construction frame * SAE 1050 (CK 50) induction-hardened, forged or rolled steel shafts * Cone rolling system Duodpjw Smb Refx Afpon * Centralized lubrication system * Hydraulic balancing system for parallel movement of the rolls (Ø280 -320 -350 -380 -400 -460) * Electronic balancing system (Ø500-550-580-620 -680) * Dual speed operation system OPTIONAL EQUIPMENT * NC and CNC control for automation * Top crane (elevator) for support in large diameter rolling * Hydraulic side supports for large diameter rolling * Hydraulic sheet ejection system * Ground and polished rolls for special applications * Stepless speed adjustment system * Electronic balancing system for parallel movement of the rolls (Ø280 -320 -350 -380 -400 -460) TECHNICAL SPECIFICATIONS Rolling Length: 2550 mm Pre-bending: 16/20 mm Bending: 20-25 mm Upper & Lower Roll: 350 mm Side Roll: 260 mm Motor Power: 23.5 kW Bending Speed: 1.5 - 5 m/min Length: 4850 mm Width: 1900 mm Height: 1950 mm Weight: 12,800 kg

Condition: new, Year of construction: 2025, control type: NC control, actuation type: hydraulic, number of rollers: 4, roller (bottom) diameter: 280 mm, roller (top) diameter: 280 mm, side roll diameter: 220 mm, roller length: 2,550 mm, sheet thickness (max.): 16 mm, STANDARD EQUIPMENT * The upper, lower, and side rolls move linearly up and down via hydraulically actuated body-mounted pistons. * Protected against overload. * Upper and side rolls are driven by hydromotors and planetary gearboxes (all three rolls are motor-driven). * The positions of the rolls can be easily read through three digital display gauges. * The hydraulically opening head and automatic upward-lifting shaft allow easy removal of the bent workpiece. * Very user-friendly operation with a mobile control panel. * Welded steel construction body. * Rolls made from SAE 1050 (CK 50) induction-hardened, forged or rolled steel shafts. * Conical bending system. * Centralized lubrication system. * Hydraulic balancing system for parallel movement of the rolls (Ø280 - 320 - 350 - 380 - 400 - 460). * Electronic balancing system (Ø500 - 550 - 580 - 620 - 680). * Dual-speed operating system. OPTIONAL EQUIPMENT * Automation with NC and CNC control consoles. * Upper crane (hoist) for support in large diameter rolling. * Hydraulic side supports for large diameter rolling. * Hydraulic plate ejector system. * Ground and polished rolls for special applications. Duodpfxew Smfcj Afpen * Infinitely variable speed adjustment system. * Electronic balancing system for parallel movement of the rolls (Ø280 - 320 - 350 - 380 - 400 - 460). TECHNICAL SPECIFICATIONS Bending Length: 2550 mm Pre-bending: 10/12 mm Bending: 12/16 mm Upper & Lower Roll: 280 mm Side Roll: 220 mm Motor Power: 16.5 kW Bending Speed: 1.5 - 5 m/min Length: 4850 mm Width: 1700 mm Height: 1850 mm Weight: 9650 kg

Condition: new, Year of construction: 2025, actuation type: hydraulic, number of rollers: 4, roller (bottom) diameter: 320 mm, roller (top) diameter: 320 mm, side roll diameter: 240 mm, working width: 2,050 mm, sheet thickness (max.): 25 mm, Equipment: documentation/manual, emergency stop, foot remote control, hardened rollers, STANDARD EQUIPMENT * The lower, top, and side rolls move linearly up and down via hydraulic pistons fixed to the frame * Protected against overload * Top and side rolls are driven by hydromotor and planetary gearbox (3-roll motor driven) * Roll positions are easily readable via three digital indicators * Easy removal of the bent workpiece thanks to the hydraulically opening head and the automatically ascending shaft * User-friendly operation with a movable control panel * Welded steel construction frame * SAE 1050 (CK 50) forged or rolled steel shafts, induction-hardened * Conical bending system * Centralized lubrication system * Hydraulic balancing system for parallel movement of shafts (Ø280 -320 -350 -380 -400 -460) * Electronic balancing system (Ø500-550-580-620 -680) * Dual speed operation system Dusdpfx Aexw Eblofpon OPTIONAL EQUIPMENT * NC and CNC control for automation * Overhead crane (elevator) for supporting large diameter bending * Hydraulic side supports for large diameter bending * Hydraulic sheet ejector system * Ground and polished rolls for special applications * Infinitely variable speed control system * Electronic balancing system for parallel movement of shafts (Ø280 -320 -350 -380 -400 -460) TECHNICAL SPECIFICATIONS Bending Length : 2050 mm Pre-bending : 16 / 20 mm Bending : 20 / 25 mm Top & Bottom Roll : 320 mm Side Roll : 240 mm Motor Power : 20 kW Bending Speed : 1.5 - 5 m/min Length : 4350 mm Width : 1800 mm Height : 1950 mm Weight : 10,500 kg

Condition: new, Year of construction: 2025, control type: NC control, actuation type: hydraulic, number of rollers: 3, roller (bottom) diameter: 250 mm, roller (top) diameter: 250 mm, side roll diameter: 200 mm, roller length: 2,550 mm, sheet thickness (max.): 10 mm, STANDARD EQUIPMENT Dedpfx Asw Slcgofpjun - Steel construction main frame - Hydraulic top roll opening head - Movable control panel - Motor-driven central rolls - Hydraulic up-down movement for rear and lower rolls - Precision bending with braked main motor - Cone bending and pre-bending system - Lower and upper rolls driven by planetary gearbox - Rear roll ball system facilitating sheet movement - Compliance with EU safety directives - High-strength forged steel rolls manufactured from SAE 1050 (CK45) certified steel - Hardened shafts - Digital indicators (2 units) - User manual OPTIONAL EQUIPMENT - Overhead crane (elevator) for supporting large diameter bending - Hydraulic side supports for large diameter bending - Ground and polished rolls - Wire grooves at roll ends - NC control unit - Dual speed operation - Infinitely variable speed adjustment - Ejector system - Hydro-motor option TECHNICAL SPECIFICATIONS Bending length: 2550 mm Pre-bending: 6/8 mm Bending: 8/10 mm Top & Bottom Roll Diameter: 250 mm Side Roll Diameter: 200 mm Min. Bending Diameter: 375 / 1250 mm Motor Power: 7.5 + 1.5 kW Bending Speed: 5 m/min Tank Capacity: 25 l Length: 4500 mm Width: 1200 mm Height: 1370 mm Weight: 4800 kg

Condition: new, Year of construction: 2025, control type: NC control, actuation type: hydraulic, number of rollers: 3, roller (bottom) diameter: 300 mm, roller (top) diameter: 300 mm, side roll diameter: 280 mm, roller length: 2,550 mm, sheet thickness (max.): 18 mm, STANDARD EQUIPMENT * Side rolls move up and down orbitally via hydraulic pistons * Equipped with overload protection * All rolls are driven by hydromotors and planetary gearboxes * Hydraulic opening head allows easy removal of curved parts * Very easy operation with movable control panel * Lower roll positions can be easily read using two digital displays * Welded steel construction frame * SAE 1050 (CK 45) induction-hardened, hot-rolled steel shafts * Bearing-mounted conical bending system Dsdpow Slf Uofx Afpjun * Hydraulic balancing system provides parallel movement of shafts * Extended shaft ends to allow mounting of profile and pipe bending rolls OPTIONAL EQUIPMENT * Overhead crane (elevator) for supporting large diameter bending * Hydraulic side supports for large diameter bending * Ground and polished rolls for special operations * Rolls for profile bending * Stepless hydraulic speed adjustment * Electronic balancing system for parallel shaft movement TECHNICAL SPECIFICATIONS Bending Length: 2550 mm Pre-Bending: 12/16 mm Bending: 16/18 mm Upper & Lower Rolls: 300 mm Side Rolls: 280 mm Motor Power: 11 kW Bending Speed: 5 m/min Length: 4600 mm Width: 1500 mm Height: 1550 mm Weight: 8400 kg

Condition: new, Year of construction: 2025, control type: NC control, actuation type: hydraulic, power: 4 kW (5.44 HP), STANDARD EQUIPMENT Welded steel construction body Three-rolls driven by motors Hardened and ground shafts made from special high-strength material Horizontal and vertical working positions Hardened standard rolls Movable control panel separate from machine body Three-way adjustable mechanical manual side supports Precise bending with braked motor Digital displays (2 units) OPTIONAL EQUIPMENT Rolls for pipe and profile bending Optional two-axis hydraulic side supports Automation with NC control TECHNICAL SPECIFICATIONS Upper Shaft Diameter: 60 mm Lower Shaft Construction: 50 mm Roll Diameter: 180 mm Dujdpfow Smhwox Afpen Working Speed: 6 m/min Motor Power: 3.75 kW Length: 1200 mm Width: 850 mm Height: 1200 mm Weight: 955 kg

Condition: new, Year of construction: 2025, control type: NC control, actuation type: hydraulic, number of rollers: 4, roller (bottom) diameter: 460 mm, roller (top) diameter: 460 mm, side roll diameter: 380 mm, working width: 2,050 mm, sheet thickness (max.): 50 mm, sheet thickness steel (max.): 50 mm, power: 38.5 kW (52.35 HP), warranty duration: 12 months, STANDARD EQUIPMENT * The lower, upper and side rolls move up and down linearly via hydraulic cylinders attached to the body * Protected against overload * The upper roll and side rolls are driven by hydromotor and planetary gearbox (all 3 rolls are motor driven) * Three digital displays allow easy reading of roll positions * Hydraulic opening head and automatic lifting shaft enable easy removal of the bent workpiece * Easy operation with mobile control panel * Welded steel construction body * SAE 1050 (CK 50) induction hardened, forged or rolled steel shafts * Conical bending system * Centralized lubrication system * Hydraulic synchronization system for parallel movement of shafts (Ø280 -320 -350 -380 -400 -460) * Electronic synchronization system (Ø500-550-580-620-680) * Dual-speed operation system OPTIONAL EQUIPMENT * Automation with NC and CNC control * Top crane (elevator) for support in large diameter bending * Hydraulic side supports for large diameter bending * Hydraulic sheet removal system * Ground and polished rolls for special applications * Infinitely variable speed adjustment system * Electronic synchronization system for parallel movement of shafts (Ø280 -320 -350 -380 -400 -460) TECHNICAL SPECIFICATIONS Bending Length: 2050 mm Pre-bending: 35 / 40 mm Bending: 40 / 50 mm Upper & Lower Roll Diameter: 460 mm Side Roll Diameter: 380 mm Motor Power: 38.5 kW Bending Speed: 1.5 - 5 m/min Length: 4850 mm Width: 2300 mm Height: 2350 mm Duedpjxd S T Uefx Afpsn Weight: 19,800 kg

Condition: new, Year of construction: 2025, actuation type: hydraulic, number of rollers: 4, roller (bottom) diameter: 380 mm, roller (top) diameter: 380 mm, side roll diameter: 300 mm, working width: 3,100 mm, sheet thickness (max.): 25 mm, Equipment: documentation/manual, emergency stop, foot remote control, hardened rollers, swiveling upper roller, STANDARD EQUIPMENT * The lower, upper and side rolls move up and down linearly, operated by hydraulic pistons connected to the frame * Protected against overloading * Upper and side rolls are driven by hydromotors and planetary gearboxes (all three rolls are motor-driven) * The positions of the rolls can be easily read via three digital displays * Rolled parts can be easily removed with hydraulically opening head and automatic lifting shaft * Very easy operation with mobile control panel * Welded steel construction frame * SAE 1050 (CK 50) induction-hardened, forged or rolled steel shafts * Conical bending system * Centralized lubrication system Djdpfx Aexw Ecvofpjun * Hydraulic balancing system for parallel movement of the shafts (Ø280 -320 -350 -380 -400 -460) * Electronic balancing system (Ø500-550-580-620-680) * Dual-speed working system OPTIONAL EQUIPMENT * Automation with NC and CNC control * Overhead crane (elevator) to support large-diameter bending * Hydraulic side supports to assist with large-diameter bending * Hydraulic sheet ejector system * Ground and polished rolls for special applications * Infinitely variable speed adjustment system * Electronic balancing system for parallel movement of the shafts (Ø280 -320 -350 -380 -400 -460) TECHNICAL SPECIFICATIONS Bending Length : 3100 mm Pre-bending Capacity : 16/20 mm Bending Capacity : 20/25 mm Top & Bottom Roll Diameter : 380 mm Side Roll Diameter : 300 mm Motor Power : 31.5 kW Bending Speed : 1.5 - 5 m/min Length : 5850 mm Width : 2250 mm Height : 2350 mm Weight : 19,200 kg

Condition: new, Year of construction: 2025, actuation type: hydraulic, number of rollers: 4, roller (bottom) diameter: 400 mm, roller (top) diameter: 400 mm, side roll diameter: 300 mm, working width: 2,550 mm, sheet thickness (max.): 40 mm, Equipment: documentation/manual, emergency stop, foot remote control, hardened rollers, STANDARD EQUIPMENT * Upper, lower, and side rolls are linearly moved up and down by hydraulically actuated pistons attached to the frame * Protected against overload * Upper roll and side rolls are driven by hydromotors and planetary reducers (3 roll motor drive) * The position of the rolls can be easily read with three digital indicators * The hydraulically opening head and the automatically lifting shaft allow the bent part to be removed easily * Very easy operation with movable control panel * Welded steel construction body * SAE 1050 (CK 50) induction-hardened, forged or rolled steel shafts * Conical bending system * Centralized lubrication system * Hydraulic balancing system for parallel movement of rolls (Ø280 -320 -350 -380 -400 -460) * Electronic balancing system (Ø500-550-580-620-680) * Dual speed operation system OPTIONAL EQUIPMENT * NC and CNC control for automation * Top crane (elevator) to support large diameter bending * Hydraulic side supports for large diameter bending * Hydraulic sheet removal system * Ground and polished rolls for special applications * Stepless speed adjustment system * Electronic balancing system for parallel shaft movement (Ø280-320-350-380-400-460) TECHNICAL SPECIFICATIONS Bending Length: 2550 mm Pre-Bending: 25/30 mm Bending: 30/40 mm Upper & Lower Roll Diameter: 400 mm Side Roll Diameter: 300 mm Motor Power: 38.5 kW Bending Speed: 1.5 – 5 m/min Dusdpoxw Ebxofx Afpjn Length: 5350 mm Width: 2250 mm Height: 2350 mm Weight: 17,800 kg

Condition: new, Year of construction: 2025, control type: NC control, actuation type: hydraulic, number of rollers: 3, roller (bottom) diameter: 250 mm, roller (top) diameter: 250 mm, side roll diameter: 200 mm, roller length: 3,100 mm, sheet thickness (max.): 9 mm, overall weight: 5,400 kg, STANDARD EQUIPMENT Steel construction main frames Hydraulic upper roll opening head Movable control panel Motor-driven central rolls Hydraulic up/down movement for rear and bottom rolls Precision bending with braked main motor Cone bending and pre-bending system Upper and bottom rolls driven by planetary gearbox Rear roll ball support system for easier sheet movement Compliance with EU safety directives High-strength, forged steel rolls manufactured from SAE 1050 (CK45) certified steel Hardened shafts Digital readouts (2 units) Operator's manual OPTIONAL EQUIPMENT Overhead crane (elevator) for support in large diameter bending Hydraulic side supports for support in large diameter bending Ground and polished rolls Wire grooves on roll ends NC control unit Dual-speed operation Infinitely variable speed adjustment Ejector system Hydraulic motor option TECHNICAL DATA Bending Length: 3050 mm Pre-bending: 5/7 mm Bending: 7/9 mm Top & Bottom Roll Diameter: 250 mm Side Roll Diameter: 200 mm Min. Bending Diameter: 375 / 1250 mm Dusdpfx Afow Slbvopjn Motor Power: 7.5 + 1.5 kW Bending Speed: 5 m/min Tank Capacity: 25 L Length: 5000 mm Width: 1200 mm Height: 1370 mm Weight: 5400 kg

Condition: new, Year of construction: 2025, control type: NC control, actuation type: hydraulic, number of rollers: 4, roller (bottom) diameter: 250 mm, roller (top) diameter: 250 mm, side roll diameter: 200 mm, roller length: 3,100 mm, sheet thickness (max.): 9 mm, STANDARD EQUIPMENT Highly suitable for bending light and medium sheet metal, aluminum, or stainless steel materials Highly suitable for bending materials into round and various diameters Lower and side rolls move up and down hydraulically via direct linear motion Protected against overload Upper roll driven by electric motor and planetary gearbox. Lower roll driven by cardan coupling system. Both rolls are driven Positions of the rolls easily readable via three digital displays Bent workpiece can be easily removed thanks to the hydraulic opening head Very easy operation with mobile control panel Welded steel construction body Dodow Slkkjpfx Afpsun SAE 1050 (CK 45) induction-hardened forged or rolled steel shafts Cone bending system Hydraulic balancing system for parallel movement of the rolls Conforms to EU safety standards and bears the CE mark User manual OPTIONAL EQUIPMENT Remote assistance with NC control Overhead crane (elevator) support for large-diameter bending Hydraulic side supports for large-diameter bending Ground and polished rolls Dual-speed adjustment system Infinitely variable speed adjustment Rotation driven by hydromotor Extractor system TECHNICAL SPECIFICATIONS Bending Length: 3100 mm Pre-Bending: 5/7 mm Bending: 7/9 mm Upper & Lower Roll: 250 mm Side Roll: 200 mm Min. Bending Diameter: 375 / 1250 mm Motor Power: 7.5 + 1.5 kW Bending Speed: 5 m/min Tank Capacity: 40 L Length: 5000 mm Width: 1200 mm Height: 1370 mm Weight: 6800 kg

Condition: new, Year of construction: 2025, control type: NC control, actuation type: hydraulic, number of rollers: 4, roller (bottom) diameter: 380 mm, roller (top) diameter: 380 mm, side roll diameter: 300 mm, roller length: 4,100 mm, sheet thickness (max.): 16 mm, STANDARD EQUIPMENT * Lower and side rolls are connected to the body by hydraulic pistons and perform vertical linear movement * Protected against overload * Top and side rolls are driven by hydromotors and planetary gearboxes (3 roll motor drive) * Roll positions are easily read via three digital indicators * Hydraulic opening head and automatic upper shaft lift allow easy removal of rolled parts * Easy operation using a movable control panel * Welded steel construction frame * SAE 1050 (CK 50) induction-hardened forged or rolled steel shafts * Cone bending system * Centralized lubrication system * Hydraulic balancing system for parallel shaft movement (Ø280 -320 -350 -380 -400 -460) * Electronic balancing system (Ø500-550-580-620-680) * Dual-speed operating system OPTIONAL EQUIPMENT * Automation via NC and CNC control * Overhead crane (elevator) to support large diameter bending * Hydraulic side supports to assist with large diameter bending * Hydraulic sheet ejection system * Ground and polished rolls for special applications * Stepless speed adjustment system * Electronic balancing system for parallel shaft movement (Ø280 -320 -350 -380 -400 -460) TECHNICAL SPECIFICATIONS Bending Length : 4100 mm Pre-bending : 10/12 mm Dusdpfsw Smc Iex Afpen Bending : 12/16 mm Top & Bottom Roll Diameter : 380 mm Side Roll Diameter : 300 mm Motor Power : 31.5 kW Bending Speed : 1.5 - 5 m/min Length : 6950 mm Width : 2250 mm Height : 2350 mm Weight : 22000 kg

Condition: used, 2x Hohner Loop Stitching Heads 43/6S, used Powerful and precise stitching heads for professional booklet production, specifically designed for ring eyelet stitching. Ring eyelet stitching is a special form of binding where the staples form a small eyelet or loop on the outside of the spine. Key Features: - Narrow version ("S") for minimal staple distances - Compatible with various collating systems (e.g., Horizon, Duplo, Bourg) - Quick tool-free switching between normal and ring eyelet stitching - High productivity with up to 14,000 stitches per hour Technical Specifications: - Minimum staple distance: 48-54 mm (depending on current stitching thickness) - Maximum stitching thickness: 3 mm (for 6 mm ring eyelets) - Inner diameter of the ring eyelet: 6 mm - Stitching wire: Round wire No. 24-26 (0.60-0.50 mm diameter) - Length of staple back: 12 mm All-Inclusive Service Package We take care of everything: from secure packaging and transportation to customs clearance. Upon request, we can also provide a customized leasing offer. Duodpfx Afow Ew Ayjpjn Sustainable and Economical Choose a used machine and benefit twice: Save the environment and your budget. Despite possible signs of use, you receive a quality product at an attractive price.

Condition: used, 2x Hohner Universal 52/8 Narrow Stitching Heads, used The Hohner Universal 52/8 are a high-quality narrow stitching heads designed for professional use in folding and saddle stitchers. It stands out for its robust construction, precise engineering, and versatile applications. Key Features: - Suitable for standard and loop stitching - Quick conversion and easy adjustment for different stitching types and wire sizes - Includes extensive accessories - Easy maintenance with accessible wear parts and clear lubrication instructions - Proven Hohner quality for reliable continuous operation Dujdpfow Ew A Hox Afpjn - Flexible adaptation to various production requirements - Compatible with many common machines and units Technical Specifications: - Maximum stitching thickness: up to 8 mm (closed staple) - Processes round and flat wire in various diameters (0.35 to 0.80 mm Ø) - Staple crown width: 14 mm - Net weight: approx. 4.0 kg

Condition: used, 1x Hohner Loop Stitching Head 43/6 The Hohner Loop Stitching Head 43/6 is a high-quality stitching head specifically designed for professional loop stitching of brochures and other printed products. This stitching head offers reliable performance and precise loop stitching. - Key Features: - Specifically designed for loop stitching - Minimum distance between stitch centers: 48-54 mm - Compatible with various collating systems (e.g., Horizon, Duplo, Bourg) - Suitable for wire gauges No. 24-26 (0.6-0.5 mm) or No. 26-28 (0.5-0.4 mm) - Available loop sizes: 6 mm or 8 mm inner diameter - Maximum stitching thickness: 3 mm (6 mm loop) or 2 mm (8 mm loop) - Easy operation and tool-free adjustment Dodpfx Ajw Ew Aaefpsun - Compact design for easy integration into existing systems Technical Specifications: - Net weight: Approx. 1.5 kg - Crown width: 12 mm - Compatible with round wire

Condition: used, 2 Hohner Stitching Heads 43/6, used Dsdpfx Asw Ewtfjfpjun The Hohner stitching heads 43/6 are high-quality stitching heads designed for professional wire saddle stitching of brochures and other printed products. These used stitching heads offer reliable performance and precision in stitching. Special features: - Versatility: Suitable for the production of brochures, booklets, and other printed products requiring stable stitching - Compatibility: Can be used in saddle stitchers from various manufacturers such as Horizon, Duplo, or Bourg - Flexible application: Ideal for processing different paper formats and weights - Easy handling: Quick adaptation to various stitching requirements - Precise stitching: Ensures clean and uniform stitching with high quality - Wire thickness: Compatible with round wire - Robust construction: Designed for industrial use Technical specifications: - Wire: 26-28 - Maximum stitching thickness: Up to 6 mm - Minimum staple distance: 43 - 52 mm - Length of staple crown: 12 mm - Net weight: Approx. 1.5 kg per stitching head

Condition: used, Hohner Stitching Head Set 2x48/5S, used The Hohner 2x48/5S stitching heads provide a precise and reliable solution for professional stitching tasks in printing and finishing operations. This set of two stitching heads enables efficient and high-quality production of brochures, booklets, and other bound printed materials. Key Features - Compact Design: The Hohner 2x48/5S stitching heads are the narrow version of standard stitching heads, with the "S" in the model name indicating a more compact design - Precision and Reliability: Hohner stitching heads offer high precision and reliability, making them ideal for professional stitching tasks - Versatility: Suitable for the production of brochures, booklets, and other printed products requiring sturdy stitching - Compatibility: In addition to Horizon, the Hohner 2x48/5S stitching heads can be used in saddle stitchers from various manufacturers such as Duplo and Bourg Specifications - Stitching Wire: Round wire No. 24-26 (0.6 – 0.5 mm) - Maximum Stitching Thickness: Up to 5 mm - Minimum Staple Spacing: 48 – 54 mm (depending on stitching thickness) - Quantity: 2 stitching heads in the set Djdpfsw Ewp Hox Afpoun All-Inclusive Service Package We take care of everything: from secure packaging and transportation to customs clearance. Upon request, we can also provide a customized leasing offer. Sustainable and Economical Choose a used machine and benefit twice: Save the environment and your budget. Despite possible signs of use, you receive a quality product at an attractive price.

Condition: used, 2 Hohner Stitching Heads 43/6, used The Hohner stitching heads 43/6 are high-quality stitching heads designed for professional wire saddle stitching of brochures and other printed products. These used stitching heads offer reliable performance and precision in stitching. Special features: - Versatility: Suitable for the production of brochures, booklets, and other printed products requiring stable stitching - Compatibility: Can be used in saddle stitchers from various manufacturers such as Horizon, Duplo, or Bourg - Flexible application: Ideal for processing different paper formats and weights - Easy handling: Quick adaptation to various stitching requirements - Precise stitching: Ensures clean and uniform stitching with high quality - Wire thickness: Compatible with round wire - Robust construction: Designed for industrial use Dujdju Sz I Aepfx Afpjn Technical specifications: - Wire: 26-28 - Maximum stitching thickness: Up to 6 mm - Minimum staple distance: 43 - 52 mm - Length of staple crown: 12 mm - Net weight: Approx. 1.5 kg per stitching head