Three-roll round, three-roll sheet bending machine, bending machine, sheet round bending machine, 3-roll round bending machine, profile bending machine, three-roll sheet rolling machine
Von8arej
-Manufacturer: Reinhardt
-Type: RAS 44.20
-Drive: electric, 1.1 kW
-Max. Sheet width: 1270 mm
-Max. Sheet thickness: 3.0 mm
-Roller diameter: 3 x 92 mm / 1 x 98 mm
-Delivery via spindles
-Top roller: can be swiveled to bend (bend without attachment)
-Dimensions: 1810/800 / H1130 mm
-Weight: 700 ...
5
Sheet rollers STROJARNE PIESOK XZC 3000/25 built in 1980 in Czechoslovakia.
Technical specifications :
- sheet width: 3000 mm
- sheet thickness: 25 mm
- winding speed: 7.5 m / min
- upper and lower roll diameter: 430 mm
Bfw702njjm
- side rollers diameter: 340 mm
- minimum rolled up: 600
- rolling machine weight: 36000 kg
8
This machine was used for a very few times.
Condition of this machine is the brand new ones.
We build a special hydraulic support for supporting the metal sheet in order to roll a big diameters or thin materials.
The machine has induction hardened rolls for rolling materials as stainless steel.
The four roll could be even 50-80% faster and more productive than any style three roll.
ROLL BY WIRE - very special and unique system for rolling. It means to run the entire
system through digital ...
9
4-roll round bending machine from FACCIN
- 2000mm width
- max. material thickness 9mm
- max. bending 8mm
Brbjga2ey7
- connected load: 9kw
- weight: 4500kg (machine) + console approx. 100-200kg
- other: mobile console with digital display; bearings and rollers overhauled by Faccin in 2017; machine is under power and can be inspected
5
- max. bending length 1550 mm
Vozvjgq
- max. sheet thickness 5 mm
- connected load 32 A
- hydraulic folding bearing
- digital display of the roll position
10
9
- bending capacity: 4 mm
- roll diameter: 550 mm
- tapered bending ongoing: 1,8 mm
- tapered bending in pressing: 3 mm
- usable length: 1500 mm
- upper roller diameter: 110 mm
- below roller diameter: 110 mm
Bhq2ontdnc
- side roller diameter: 130 mm
- two driven rollers by direct linked hydraulic motor
- turning speed: 5 m/min
- voltage: 400 V, 50 Hz, 3 Ph
12
1
working lenght 2.550 mm
roller diameter 180 mm
max. thickness 5 mm
machineweight 5,8 ton
Cw07d7qm
incl. conic rolling
incl. flat and pipe rolling possible
1
Nominal power: 3000x22/18 mm
top roller: 370 mm
bottom roller: 340 mm
side rollers: 270 mm
Btwgdyv
Drive power: 25 HP
Power supply: 400 V/50 Hz
Including hardened rolls, cone bending package, oil cooler, Easy Roll CNC control
Price on request.
Machine is delivered with commissioning and training in German.
We are DAVI trade and service partner for North, West and East Germany.
2
Roll diameter: 760mm, bending diameter: 760-5000mm, workpiece length: 4200mm, workpiece thickness: 15-100mm, including 1 roll 760mm, 1 roll 680mm, machine was retrofitted in 2013.
Bbg9thtl7n
4
Three roll bending machine make STÖLTING Type EV 4
Year of construction 1983 with 6 exchangeable top rollers!
Okrat
Technical data:
bending length 1050 mm
max. bending strength with strongest roll 4.0 mm
Drive power 4,0 kW
external dimensions approx. 1500 x 700 x 1300 mm
Weight approx. 650 kg
with
- 6 exchangeable top rollers
60, 65, 90, 95, 100 and 110 mm
- 2 bottom rollers
- Hinged bearings
- Emergency stop
- R+L run
used, in good condition
1
Shaft diameter 45 mm
Roller diameter 162 mm
Delivery time prompt, subject to prior sale
special price € 7.560,- (instead of € 9.400,-)
or leasing rate from € 143,64 *
Bending capacities:
Bending capacity (cross section / min. diameter):
Flat bars upright: 60x10 mm / 600 mm; 20x10 mm / 300 mm
Flat bars horizontal: 80x15 mm / 600 mm; 50x20 mm / 450 mm
Square steel: 35x35 mm / 600 mm; 15x15 mm / 300 mm
Round steel: Ø. 35 mm / 600 mm; Ø 20 mm / 300 mm
Tube: Ø 60x2 mm / 1,000 mm; Ø 30x2 / 450 mm...
6
3-roll round bending machine Ostas ORM 1270 x 140
Technical specifications:
Special equipment included in the price:
motorized lower roll adjustment
hardened rolls
motorized rear roller adjustment
digital display
sheet width 1270 mm
sheet thickness 5,0 mm max.
sheet thickness 4,0 mm bending
roll length 1270 mm
roll diameter 140 mm
weight 1400 kg
dimension L-W-H 2500 x 800 x 1100 mm
Motor: 2.2 KW
Equipment:
upper and lower roller electrically driven
upper roller can be swung out
conical bending d...
4
Roll bending machine with spindle infeed.
and 3 driven rollers
Features:
Shaft diameter: 40 mm
Working position: horizontal/vertical with support
Connection: 230V/1 phase with inverter
dimensions (W x H x D): 700 x 1460 x 600 mm
Weight: 180 kg
Power:
round tube : 70 x 1,5 mm
Square tube : 50 x 50 x 3 mm
Round bar : 35 mm
Bsa3py0gkj
flat iron : 50 x 10 mm
Angle iron : 50 x 50 x 6 mm
Scope of delivery:
CE40M3D
Universal roll set for profiles
Accessories (e.g. control panel with foot control, opera...
9
6
Offered from a bankruptcy is a ready to use 3-roller bending machine
Manufacturer Fasti
Model 104-10-2.5
Built in 1991
Masch.Nr. 9114046
Bef9cwpu3h
Technical data:
Performance 1020 x 2, 5m
Motor brake
Before return by foot switch
man. Delivery of the rollers
Top roller swivel
Roll diameter: 90mm
Emergency-off per rope
380 volts
Weight approx. 400kg
9
motorized three-roll bending machine - sheet metal round bending machine
Offer number: 20017
Make: SCHÄFER
0y8hv32
Type: SRMVS 2500x18 ( VIII 44 )
machine no.: 3366
Year of construction: 1969
Technical data:
- Three roller drive
- bottom rolling with mot infeed for bending + conical bending
- hydr. hinged bearing for removing the sheet
- max. working width approx. 2550 mm
- max. passage approx. 2650 mm
- max. plate thickness for pipe diameter 385 mm 18 mm
- max. plate thickness with bend 1...
1
shaft diameter 90 mm
Roll diameter 260 mm
Delivery time approx. 6-8 weeks from order placement
shaft diameter: 90 mm
Roll diameter: 260 mm
Driven rollers: 3
Motor power: 5,5 kW
Speed: 6.37 m/min.
Bending capacities (cross-section / min. diameter):
flat bars upright: 100x20 mm / 2000 mm; 80x20 mm / 800 mm; 30x10 mm / 300 mm
Flat iron lying: 125x25 mm / 600 mm; 60x5 mm / 300 mm
Quad wheel steel: 45x45 mm / 500 mm; 15x15 mm / 380 mm
Round steel: Ø 50 mm / 500 mm; Ø 15 mm / 380 mm
Tube: Ø 100x2.5 mm...
3
Manual three roll round bending machine make FASTI type 103-20-1.5
Machine # 9113030 Year of construction 1991
Technical data:
working length 2040 mm
max. sheet thickness 1,5 mm
roll diameter 100 mm
weight approx. 740 kg
outer dimensions approx. 2500 x 980 x 1400 mm
with
- swing-out upper roll
- lower and rear roller adjustment with hand wheel
Nmrft
little used, in very good condition
6
Technical data:
- max. working width 3030 mm
- Max. plate thickness 2 mm
- roller diameter 140 / 160 mm
- stroke of the rear roller 120 mm
- Working speed 4 m/min
- Drive - brake motor 400 V / 3.0 kW
- Space requirement approx. W 1750 x D 800 x H 1100 mm
- Weight approx. 2.9 t
- with - asymmetrical roller arrangement,
Pqfkqzx2
- Annex
- Back roller tiltable,
- Hinged bearing for swinging out the top roller
- Right + left rotation
- separate control panel
1
shaft diameter 110 mm
Roll diameter 320 mm
Delivery time approx. 6-8 weeks from order placement
shaft diameter: 110 mm
Roll diameter: 320 mm
Dicq0w3h
Driven rollers: 3
Motor power: 7,5 kW
Speed: 4.98 m/min.
Bending capacities (cross-section / min. diameter):
flat bars upright: 100x20 mm / 800 mm; 30x10 mm / 400 mm
Flat bar lying: 200x30 mm / 1,200 mm; 160x35 mm / 800 mm; 80x5 mm / 400 mm
Quad wheel steel: 60x60 mm / 750 mm; 15x15 mm / 400 mm
Round steel: Ø 75 mm / 800 mm; Ø 15 mm / 450 mm
Tube: ...
1
shaft diameter 70 mm
Roll diameter 200 mm
Delivery time approx. 6-8 weeks from order placement
shaft diameter: 80 mm
Roll diameter: 200 mm
Driven rollers: 2
Motor power: 3 kW
Speed: 8 m/min.
Bending capacities (cross-section / min. diameter):
flat bars upright: 60x10 mm / 500 mm; 20x5 mm / 250 mm
Flat bar lying: 80x20 mm / 500 mm; 50x5 mm / 250 mm
Quad wheel steel: 32x32 mm / 400 mm; 12x12 mm / 250 mm
Round steel: Ø 35 mm / 350 mm; Ø 10 mm / 250 mm
tube: Ø 60x2 mm / 600 mm; Ø 15x1.5 mm / 200 mm;...
1
shaft diameter 45 mm
Roll diameter 162 mm
Delivery time prompt, subject to prior sale
Bending capacities:
Nhe00uw2
Bending capacity (cross-section / min. diameter):
flat iron upright: 60x10 mm / 600 mm; 20x10 mm / 300 mm
Flat iron lying: 80x15 mm / 600 mm; 50x20 mm / 450 mm
Quad wheel steel: 35x35 mm / 600 mm; 15x15 mm / 300 mm
Round steel: Ø. 35 mm / 600 mm; Ø 20 mm / 300 mm
tube: Ø 60x2 mm / 1,000 mm; Ø 30x2 / 450 mm
shaped tube upright: 60x30x3 mm
Square shaped tube: 45x45x3 mm
Angle iron out...
Very little used ! Excellent condition.
ONLY 57 h working hours !
Ci23yaiq
New price 75.000,00 Euro
sheet width 600 mm
plate thickness 5 mm
pre-bending 4 mm
Roll diameter with mounted rings:
Upper- and lower roll diameter 192 mm
Side roll diameter 152 mm
total power requirement 7,35 kW
weight of the machine approx. 2,5 to
Control DAVI Smart Basic
Hydraulic drop end
With mounted rings on the rolls (for better grip, also ideal for edged sheet metals).
10
sheet width 1550 mm
plate thickness 6,5 mm
pre-bending 4,5 mm
diameter of upper rolls 150 mm
side roll diameter 130 mm
diameter of lower rolls 150 mm
total power requirement 2,2 + 1,5 kW
weight of the machine ca. 2.370 kg.
B2mkdbpi
range L-W-H 3.300 x 1.200 x 1.300 mm
5
sheet width:3100 mm
plate thickness:10 mm
pre-bending:6/8
diameter of lower rolls:260 mm
upper roll diameter:285 mm
side roll diameter:200 mm
total power requirement:9 kW
weight of the machine ca.:8 t
dimensions of the machine ca.:5,2 x 1,4 x 1,3 m
Pu2dky
4 roll hydraulic plate bending machine with pre-bending device and digital readout.
3
Ring bending machine, profile bending machine, three-roll bending machine, bending machine
-Spare roles
-Outer: Ø 200 mm
-for: 35 mm pipe
Cjuyvfy0a
-Bore: 49 mm
-Number: 4 rolls available
-Price: complete
-Weight: 44 kg
5
sheet width 1500 mm
Bkcychqg8
plate thickness 5 mm
diameter of upper rolls 175 mm
diameter of lower rolls 160 mm
sheet width 2070 mm
plate thickness 4 mm
pre-bending capacity 3,5 mm
diameter of upper rolls 140 mm
total power requirement 2,2 KW
weight of the machine ca. 1,73 t
dimensions of the machine ca. 3230 x 800 x 1100 mm
Basic equipment:
- Conical bending device
Benmmkxkyp
- Swiveling top roller
- Conical bending device
- driven top roller
- Pre-bending device
- brake motor
- Safety device emergency leash
- CE certified
- documentation
Options:
Electrically adjustable rear roller
Digital display f...
Suitable for rounding iron sheet up to 450 N / mm² tensile strength,
at a yield strength of 240 N / mm².
Sheet width 400 mm
Sheet thickness when bending 25 mm
Sheet thickness when rounding 30 mm
Upper roll diameter 135 mm
Bshshndcpp
Side roll diameter 100 mm
Bottom roll diameter 135 mm
Main motor 18,38 kW
Drive speed 4 m / min.
Ejection device
Display device for the correction of the target diameter
Weight of the machine approx. 6500 kg
6
sheet width 2600 mm
plate thickness 13,0 mm
pre-bending 10,0 mm
diameter of upper rolls 270 mm
side roll diameter 210 mm
diameter of lower rolls 250 mm
total power requirement 11,0 kW
weight of the machine ca. 7200 kg.
Beoajz0mxk
range L-W-H 5.022 x 1.520 x 1.438 mm
5
sheet width:3000 mm
plate thickness:8 mm
weight of the machine ca.:5,5 t
Bkquzzrzkw
dimensions of the machine ca.:4,5 x 1,2 x 1,4 m
Hydr. 4 roll DAVI Plate bender
Top / Lower roll Ø : 220 mm / 200
pre bending
Hydraulic Drop end
Conical bending
last software update in 2018
sheet width 2030 mm
plate thickness 1,5 mm
pre-bending ja
roll diameter 95/88 mm
switchgear cabinet 850 x 600 x 1500 mm
total power requirement 1,5 kW
weight of the machine ca. 1,9 t
dimensions of the machine ca. 3,2 x 1 x 1,3 m
Ltc2mjjf
CE signed
Function: ready for operation
Electric 380 Volt
Emergency wire switch
Mot. 4-roller bender with two-roller drive (top / bottom), Sergi
Screen control in rollable control panel selectable in manual +
semi-automatic. On the screen will be the...
10
sheet width 2100 mm
plate thickness 20 mm
pre-bending .
diameter of upper rolls 300 mm
2r0sqy
diameter of lower rolls 400 mm
total power requirement kW
weight of the machine ca. t
dimensions of the machine ca. m
sheet width 3070 mm
plate thickness 4 mm
pre-bending 3 mm
diameter of upper rolls 190 mm
min. bending diameter 285 mm
total power requirement 5,5 KW
weight of the machine ca. 4,3 t
dimensions of the machine ca. 4,75 x 1,12 x 1,38 m
Ocxb2
- Bending capacity 3070 x mm
3
BENDING LENGTH: 1050 mm
SHEET METAL THICKNESS: 5 mm
UPPER ROLL DIAMETER: 130 mm
SIDE ROLLS DIAMETER: 110 mm
BENDING SPEED: 4,5 m/min
POWER: 3 kW
Bg9jgyllgq
WEIGHT: 1560 Kg
OVERALL DIMENSIONS: 2250 x 1000 x 1500 mm
PRICE: On demand
8
sheet width 2050 mm
plate thickness 4,5 mm max.
plate thickness 4,0 mm anbiegen
roll length 2050 mm
Nlodx
min. dia. 210 mm
roll diam. toproll 140 mm
weight 1530 kg
range L-W-H 3220 x 1200 x 900 mm
8
sheet width 2070 mm
plate thickness 4 mm
Wttb0ec9
distance between columns 2100 mm
diameter of upper rolls 140 mm
total power requirement KW
weight of the machine ca. 0,37 t
dimensions of the machine ca. mm
10
SN WO 092-N010/1507
working width 2000 mm
sheet thickness 5 mm
Ba0fx0sh8f
automatical in-/output
11
4-rolls plate bending machine IV2424
YOM: 1988
Manufacturer: RAZYAN
Made in: Russia
It is used for bending of cylindrical and conical shells or their elements from sheet material in a cold and hot state.
Specification:
Max. plate thickness:
Dl8twpqby
-At bending: 25 mm
-At prebending: 20 mm
Max. plate width: 3150 mm
Min. bending radius: 380 mm
Bending speed: 7500 mm/min
Upper roll diameter: no more than 500 mm
Total power: 25 kW
Main drive motor power: 37 kW
Voltage: 380 V; 50 Hz
Dimension...
sheet width 3070 mm
plate thickness 5 mm
pre-bending 4 mm
diameter of upper rolls 200 mm
min. bending diameter 300 mm
total power requirement 5,5 KW
weight of the machine ca. 5,1 t
dimensions of the machine ca. 4950 x 1120 x 1380 mm
Supxmk
- Bending capacity 3070 x mm
6
BENDING LENGTH: 2000 mm
SHEET METAL THICKNESS: 2 mm
PRE-BENDING THICKNESS: 1,5 mm
UPPER ROLL DIAMETER: 120 mm
SIDE ROLLS DIAMETER: 114 mm
CENTRAL ROLL DIAMETER: 130 mm
BENDING SPEED: 6 m/min
POWER: 2,2 kW
Bg3x3xbkzv
CONTROL UNIT: KVARA duemila3
WEIGHT: 2100 Kg
OVERALL DIMENSIONS: 3400 x 1200 x 1100 mm
PRICE: On demand
9
sheet width 2600 mm
plate thickness 10,0 mm
pre-bending 8,0 mm
diameter of upper rolls 230 mm
side roll diameter 190 mm
diameter of lower rolls 210 mm
total power requirement 7,5 kW
weight of the machine ca. 5.560 kg.
range L-W-H 4.650x1.380x1.300 mm
Ausstattung:
- hydr.-4 Walzen Rundbiegemaschine
- Konischbiegeeinrichtung
- Induktionsgehärtete Walzen
- Digitalanzeige für die beiden Seitenwalzen
- fahrbares Bedienpult
- 2 Geschwindigkeiten
- hydr.-Klapplager
- Bed. Anleitung
- CE-Zeichen / Ko...
5
4 Rolls Hydraulic Plate Bending Machine
Owdlr
3
4-roll bending machine in very good condition.
Length of rolls 1015 mm
8p3e8e0
Max. plate thickness 8 mm
Diameter of rolls 160 mm
Machine dimensions 2150, 1000, 1300 mm
Weight 1700 kg
4
Offered from a bankruptcy is a ready to use 4 - roller bending machine
Manufacturer of remote access
Model 47.30
Year unknown
Masch.Nr.103/3
Technical data:
1520 x 1, 75mm
2 x powered rollers
Begsiuf0mt
2 x Geschweindigkeit 3, 2 + 6, 4 m / min
Before return
Roll diameter: 75mm
tapered round possible
Top roller swivel
Emergency-off per rope
Weight 670kg
380 volts
1 KW
Space requirement approx. 2100x850x1100mm
sheet width 1270 mm
plate thickness 4 mm
pre-bending 3,5 mm
diameter of upper rolls 120 mm
total power requirement 2,2 KW
weight of the machine ca. 1,15 t
dimensions of the machine ca. 2500 x 800 x 1100 mm
Basic equipment:
- Conical bending device
- Swiveling top roller
- Conical bending device
- driven top roller
- Pre-bending device
- brake motor
- Safety device emergency leash
- CE certified
Bhrhjmqv
- documentation
Options:
Electrically adjustable rear roller
Digital display for rear rol...
3
Control unit - with NC control Conical bending device Side roll positioning electronically synchronized via PLC Safety mechanism for welding (welding possibility) on the machine Machine body made of stress-relieved annealed steel 4 roll drive system - upper, and lower roller with hydraulic motor driven synchronized via planetary gear (ᐳ 430 mm) Electrical and hydraulic protection against overloads Hydraulically adjustable lower roller pressure Hydraulic roller brake, prevents the sheet from slip...