Used 4 Blades for sale (61,627)

Year of construction: 2011, condition: ready for operation (used), functionality: fully functional, Equipment: CE marking, We are selling a legendary Kronen GS-10 industrial belt slicer, perfect for fruit and vegetable processing. Equipped with a 4 mm slicing blade, 380 Volt, 5-pin plug. Excellent for continuous slicing of firm-fleshed fruits and vegetables. Unfortunately, it was not suitable for our strawberries, so we are selling it after purchasing it new in 2024 (purchase invoice available). Comes with all safety systems and CE certification. The machine's data plate is not available. Organic farm PODERE COLOMBARA DI GIULIA SERRAO (Imola, Bologna) Dcjlhcsyympredw Nen

Condition: excellent (used), Year of construction: 2016, Thompson T400 BLADESTOP saw for sale. For more information, please contact me via email. Dcelhsz Eigljcdw Nsn

Condition: like new (used), Year of construction: 2022, functionality: fully functional, power: 84 kW (114.21 HP), cutting height (max.): 450 mm, saw blade diameter: 630 mm, actuation type: electric, rotational speed (max.): 1,480 rpm, Walter 84kW Multi-blade saw Dimensions Length 3440 mm Width 1900 mm Height 1700 mm Cutting parameters Maximum diameter of the log to be sawn 450 mm Diameter of the circular saw 630 mm Minimum width of the center stack 60 mm Maximum number of saws per spindle 4 pieces 2 spindles, one on top and one on the bottom Motors Power of the motor for the lower drive 52 kW Power of the motor for the upper drive 41 kW Spindle speed 1480 rpm Infinitely variable feed rate 0–15 m/min (0–25*) Power of the motor for the feed drive 4 kW Additional equipment Log turner for rotating and positioning logs up to 6 m in length Djloz H T Ayohcdw Njcn Side product separator for material up to 6 m in length

Condition: excellent (used), CATALOGUE NUMBER 7212 TECHNICAL DATA - track width 250mm - shaft width 400mm - shaft diameter 80mm - max. blade diameter 400mm - blade bore diameter 80mm - max. cutting height 140mm - table width with clearance 730mm - table length 2130mm from top: - pawls - pressure shaft, sliding - pawls - pressure shaft, smooth - shaft with saw blades - smooth, pressure shaft 4 pcs from bottom: - sliding, smooth shaft - pawls - track feed table + guide rail Dcslhcozxqv Djdw Non - roller width 460mm - feeder dimensions L/W 1660x630mm - overall dimensions L/W/H 2010x630x900mm discharge table - pulling rollers 8 pcs - roller width 800mm - overall dimensions L/W/H 4400x980x880mm - central lubrication - electric lifting of the machine body up/down 0.55kW - electric adjustment of the saw blade shaft 0.55kW - stepless feed rate adjustment 1-39m/min - feed motor 1.1kW - main motor 30kW - dust extraction nozzle diameter 210mm - overall dimensions of the multi-blade saw L/W/H 2520x1870x2000mm + control panel - total weight approximately 2500kg ADVANTAGES - German production - large cutting height - feed and discharge tables - used multi-blade saw, very good condition Net price: 89,900 PLN Net price: 20,907 EUR Net price calculated at an exchange rate of 4.30 PLN/EUR (price may change in case of larger exchange rate fluctuations)

Condition: like new (used), Year of construction: 2019, operating hours: 2,557 h, functionality: fully functional, travel distance X-axis: 1,270 mm, travel distance Y-axis: 508 mm, travel distance Z-axis: 635 mm, feed rate X-axis: 25 m/min, feed rate Y-axis: 25 m/min, feed rate Z-axis: 25 m/min, controller manufacturer: HAAS, controller model: CNC Control, total height: 3,096 mm, total length: 3,832 mm, total width: 3,402 mm, table width: 473 mm, table length: 1,321 mm, table load: 1,500 kg, overall weight: 6,500 kg, spindle speed (max.): 8,000 rpm, operating hours of spindle: 2,557 h, spindle nose: BT40, number of spindles: 1, number of slots in tool magazine: 20, input voltage: 400 V, Equipment: chip conveyor, documentation/manual, The machine is in excellent condition and has only 2557 spindle hours, and it is very well-equipped! This HAAS VF-4 is equipped with: - Chip conveyor - Renishaw OTS tool probe - Renishaw (HAAS 40-2) 3D probe - Programmable coolant nozzle - Mechanical preparation for a 4th axis - Approx. 25 tool holders incl. tools - Machine vise - Coolant gun - 3 Renishaw probe styli Dcolhoz Nfirocdw Nen - Coolant tank - Original documentation.

Condition: used, Year of construction: 2022, Manufacturer: Scott Automation / Bladestop Model: BST400-RH Year: 2022 Condition: Used Dcjlhcdwoz Nir Do Nsn Serial number: 1007/22-414 Stock number: 3446 Cutting height: 420 mm Cutting width: 390 mm Saw blade: 3290 x 16 x 0.56 mm Compressed air: 6 - 7 Bar Power: 3 x 400V, 50Hz, 3kW Dimensions: 1100 x 1150 x 2100 mm Weight: 360 kg Glove check: Glove detection by means of color-sensitive scanning with a high-frequency camera.

Condition: used, functionality: fully functional, Raimann KS310 multi-blade saw with material handling system Max. cutting width: 310 mm Max. feed width: 650 mm Max. cutting height with multi-blade equipment: without pressure plate 120 mm, with pressure plate 105 mm Min. cutting height: 10 mm Min. workpiece length: 450 mm Chain width: 340 mm Saw mandrel diameter: 65 mm Arbor diameter: 80 mm Diameter of circular saw blade: 250-360 mm Saw mandrel speed: 3900 rpm Feed speed, continuously variable: 4–45 m/min Main motor: 37 kW Dslhcdoz Hi Swjw Nscn Outfeed table with side discharge and material return to the operator Technical documentation and CE certificate Dimensions: 640x370x180 cm (H)

Condition: used, Year of construction: 2022, machine/vehicle number: T0616, with CNC control, manufactured by SODICK, type: LN2, travels: X-axis: 350 mm, Y-axis: 250 mm, Z-axis: 270 mm, with automatic tool changer with 4 tool positions, resolution: 0.0001 mm, work table (made of ceramic), size: 600x400 mm, max. workpiece weight: 550 kg, max. electrode weight: 50 kg, dielectric fluid capacity: 400 l, machine dimensions: 2080x1955x2350 mm, machine weight: 3200 kg, with CO2 extinguishing system, operating hours: 1690 h. Dolhcdwez Nhtms Nscn

Condition: used, Metal band saw blade, band saw blade -Condition: unused in original packaging -Number: 5x sheets available -Price: per piece Dolscud I Nohcdw Njcn -Toothing: 4/6 -Dimensions: 2085 x 20 x 0.9 mm

Condition: excellent (used), Metal band saw blade, band saw blade, metal saw band -unused, original packaging -Number: 4 sheets available Price: per piece Dcslhcdwsb A Hh Eo Non -Tooth pitch: 4 TPI -Dimensions: 5990 x 34 x 1.1 mm

Condition: good (used), Code: 0320 Brand: SAC SUERI - ITALY Model: T 4 - CE Standard Electronic tenoning machine for wooden frames, doors, cabinet doors, furniture, and various - CE Standard Technical data: End trimming saw with continuous axis positioning - Horizontal stroke 130 mm - Motor power 3,2 Kw - Blade diameter 400 mm Hole 30 Tenoning spindle - Spindle length 320 mm - Spindle diameter 50 mm - Motor power 5,5 Kw - Continuous axis positioning - Max tool diameter 350 mm Dslhcdwjytg R Io Necn Tenoning carriage table size 750 x 900 mm - Motor power 1,1 Kw - Working speed 3/10 mt/min - Positioning speed 30 mt/min - Tilting guide - Guide with stop and display Min workpiece height 30 mm Max workpiece height 90 mm Min workpiece width 30 mm Max workpiece width 600 mm Min/max workpiece length 200/3000 mm Max tenoning depth 130 mm Max squaring width 1000 mm Electronic control of all machine functions - Alphanumeric keyboard - Monitor LCD 9,5"- 800 storable programs - Free programming by the operator - Sequential work programs Suction port diameter mm 100/160 Overall dimensions mm 2250 x 1800 x 2050 h Weight kg 1800

Condition: used, Year of construction: 2021, Drilling capacity in St 60 55 mm threading in St 60 M 30 M 36 Short spindle MK 4 spindle stroke 140 mm throat 300 mm column diameter 145 mm Machine table - usable table surface 615x430 mm T-Slots Amount - Width - Distance 2x14x224 mm distance spindle - column min./max. 150/735 mm feed 0,1 + 0,3 mm/U 0 stufenlos Spindle Speed 70-2.400 U/min. engine 3,0 kW machine weight ab. 380 kg Standard equipment: - 7" TFT LCD display with touch function: * Manual input of spindle speed set value * Actual speed display * Integrated drilling depth display with touch zero point transfer * Virtual drilling depth scale in the display * Machine status indicators and warnings on the display Djlhcoz I Ub Hodw Nocn * Service information * Selectable operating language: DE/EN/FR/ES/IT/NL/RU - Thread cutting device, for thread cutting with stop, max. 6 threads/min (thread cutting capacity depending on spindle speed), thread depth adjustable via depth stop and on the TFT LCD display (4 tools) - Infinitely variable speed adjustment via adjustment lever - Spindle protection with electrical fuse - Three separate buttons for clockwise rotation - anticlockwise rotation - stop - Mushroom pushbutton (latching) for EMERGENCY STOP - Main switch, lockable - Clockwise and counter-clockwise rotation via contactor control - Control voltage 24 V, protection class IP 54 - Paint finish: DD textured paint signal white RAL 9003, PANTONE 4545c, black Item 20.5 Foot switch in addition to the thread cutting device, for switching the direction of spindle rotation in the process. direction of rotation during the process Item 25. Coolant unit B, consisting of: separate container (33 l), pump with motor protection switch, complete armature motor protection switch, complete fitting Item 37.5 Technology calculator in the display The technology calculator guides you through the cutting task Determination of the cutting data using the following parameters: - Manufacturing process - Tool diameter - Cutting speed - Material table - Transfer function of the spindle speed as set value

Condition: excellent (used), Metal band saw blade, band saw blade -unused: original packaging -Number: 6x sheets available -Price: per piece Dcjlhcsb A Inwedw Nsn -Toothing: 4/6 -Dimensions: 4400 x 34 x 1.1 mm

Condition: used, Year of construction: 2016, Bystronic BySprint Fiber 3015 + ByTrans 3015 Extended – Laser cutting machine with loading and unloading system Working area: 3000 x 1500 mm Laser power: 4000 W - ByTrans 3015 loading and unloading system - ByVision CNC control with touchscreen - Handheld control unit Dcolhjz Itl Dscdw Njn - Fiber 4000 laser source - Cutting parameter assistant - Automatic nozzle cleaning - Automatic nozzle changer with 40 positions - Operator protection in the cutting area and loading/unloading area - Extraction system - Extraction device for sheet separation - Compressed air connection - Year of manufacture: 2016 Included packages: - Material specification package - Package for part tolerances & cutting surface quality - Package for cutting gas supply & cutting quality

Condition: excellent (used), Year of construction: 1999, Double-sided, multi-purpose edge sanding machine with oscillation and 200mm sanding height. Langzauner LZK 4-S with veneer edge sanding side and solid wood sanding side. 200mm sanding width. Motorized sanding belt oscillation, therefore no compressed air connection is required. Drive motor 400V / 3kW. Front work table for sanding veneer edges with a grooved stop guide (for veneer overhang). Veneer sanding device with fine adjustment, foldable. Spring-loaded table, adjustable in height and can be positioned laterally. Angle stop. Rear, adjustable work table for sanding solid wood. Both tables are height-adjustable to utilize the sanding belt. Belt dimensions 3000 x 200mm. Dcjlhcdwsz I T Ape Nsn Lateral extension table for radius sanding on the 150mm belt roller. Feed stand holder 68mm. Central dust extraction port 140mm. Very stable frame with 2 swivel casters, 2 steering casters, and a locking brake. CE marking. All graphite pads and dust extraction hoses have been replaced. Original paint, only touched up in a few places. Excellent condition from a small restoration workshop. Some sanding belts are included. Dimensions approximately 1800 x 1000 x 1250mm (LxWxH). Weight approximately 650kg. The machine can be demonstrated on-site by appointment. We only offer machines that are ready for demonstration and are in stock in our warehouse; see "other offers from this provider."

Condition: used, machine/vehicle number: 62220966, Max. grinding wheel diameter: approx. 250 mm, grinding area: 350x150 mm, with magnetic clamping plate, machine light, and coolant system. Dcjlhcez Nhr Nedw Nsn

Condition: used, Year of construction: 2014, Behringer LPS 40-4 - Vertical metal bandsaw - Hydraulic band tensioning - Servo-controlled feed - Sturdy C-frame - Year of manufacture: 2014 Technical data - Working area (L x W x H): 4000 x 680 x 400 mm - Smallest cutting height: 10 mm - Minimum cutting width: 15 mm - Inner table support area: approx. 680 x 4000 mm - Inner table maximum load: 7500 kg - Outer table support area: approx. 680 x 4000 mm Deloz H Acpehcdw Nocn - Outer table maximum load: 9500 kg - Material support height: approx. 1385 mm - Cutting speed: 17 - 120 m/min - Saw band dimensions: 5400 x 54 x 1.6 mm - System/band tensioning pressure: 85 bar - Coolant capacity: approx. 250 l - Motor power - saw drive: 5.5 kW - Motor power - hydraulic pump: 2.2 kW - Motor power - chip conveyor: approx. 0.26 kW - Connection value: approx. 11 kW - Voltage: 400 V, 50 Hz - Control voltage / hydraulic valve voltage: 24 V= (DC) - Current consumption: approx. 25 A - Fuse rating: 35 A - Conductor cross-section: min. 10 mm2 - Machine dimensions W x H x D: 6450 x 2870 x 2350 mm - Weight (net): approx. 10000 kg

Condition: used, Year of construction: 2017, operating hours: 1,800 h, No. 3131 CNC machining center FORMAT-4 profit H10 22.43 Used, year of construction 2017 Operating hours approx. 1800 h Package consisting of CNC machining center FORMAT-4 profit H10 22.43, feeding unit FORMAT-4 L-Motion and extraction unit FELDER RL 300 Technical data CNC machining center FORMAT-4 profit H10 22.43: Matrix table system made of phenolic resin Raster table with two stop rows Automatic central lubrication HARDWARE control computer Mobile control panel Handheld terminal for remote control of the axes Two vacuum pumps, rated output 2 x 250 m3/h Tool changer with 10 tools Tool changer on the left in the machine stand: 8 tool positions for HSK Milling spindle 12 kW (S6) HSK F63, 24000 rpm Central extraction via merged connections (D=250mm) Woodflash German software (H20/H08/H10/H50) Travel of axes H10 22.43: X= 5230 mm / Y= 2560 mm / Z= 280 mm Working field: X= 4300 mm / Y= 2160 mm / Z= 105 mm Axis positioning speed: X= 100 m/min / Y= 100 m/min / Z= 30 m/min Technical data feeding unit FORMAT-4 L-Motion: Year of construction 2017 In 2-axis version with 4 storage locations for feeding an H10 with lifting table Feeding the CNC Gentle transport Fully automatic panel handling Workpiece sizes: Length 2000-4200mm / width 600-2100mm / thickness from 8mm / panel weight 200kg Density: chipboard 650kg/m3 / MDF raw 750kg/m3 Stacking height 1800mm Technical data extraction unit FELDER RL 300: Year of construction 2023 Nominal volume flow 6000 m3/h, H3 GS dust-tested, JET cleaning Compressed air connection 3/4 inch Connection pressure 7 - 12 bar with 40NL/min Operating pressure in the device 6 bar Chip container capacity 500 l Extinguishing device with powder extinguisher Dry fire extinguisher 12 kg Dolhsrrh T Aocdw Njcn Sale On behalf of customer, ex location Leipzig, without dismantling, without transportation and assembly Subject to errors in description and price Dismantling and loading by us optionally possible To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical details, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: "purchased as inspected" Images and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices plus VAT, payment before collection or dispatch Terms of delivery: ex location

Condition: used, Year of construction: 2009, Automatic central lubrication Milling unit 7833 2-stage, 11 kW power 1000 - 24000 rpm 1 double drilling spindle in X-direction 1 integrated sawing unit for sawing / grooving in X-direction, traveling Tool changer 7892, 16-way Linear Pick-up changer, permanently installed on the right-hand side of the machine Laser pointer consisting of 2 laser pointers for positioning the vacuum suction cups or tracing the workpiece contour Automatic console - suction cup positioning 6 consoles including 3 suction cup holders per console including 1 vacuum suction cup 80x80 mm per suction cup holder including 4 feeding aids Additional processing fields at the front for 6 consoles Basic unit pneumatics for frame clamping system 7974 (6 consoles) 2D barcode scanner Video camera in the processing head Vacuum pump 140 m³/h Vario tool Change changing unit package consisting of Consists of: Vector axis 7899 (C-axis), fully interpolating, 0-360° continuously rotatable, including pneumatic tool changer 7890, single-slot magazine pick-up system, permanently installed in front of the machine frame on the left. Tool changer 7894, 6-slot pick-up magazine specifically for Vario Tool Change tool holders, permanently installed in the machine frame on the left, can be equipped with a Vario Grip KSJ F 40 collet chuck, 3 Vario Grip KSJ F 40 tool holders (for 2-20 mm ER32 collets), 1 saw blade holder, 3 collets according to customer selection, 1 carbide circular saw blade, max. 220 mm diameter. Storage location: Nattheim Dslhjvvi Spjcdw Necn

Condition: good (used), functionality: fully functional, Year of construction: 1995, Euromac corner notching machine with adjustable angle Type 220 4 Delhcdwez I Ilxo Nscn Capacity 220 x 4 mm

Condition: used, functionality: unexamined, overall weight: 8 kg, total length: 390 mm, total width: 460 mm, total height: 270 mm, Ferwood Code: RU0008193 - Manufacturer Code: MDX61B-0110-5A3-4-00 - Condition: Used - Functionality: Not tested - Compatible Machine: CNC LIGMATECH-HOMAG - If interested, we offer an overhaul service, please contact us. Delhoz Izk Ujcdw Necn

Condition: used, Year of construction: 2015, functionality: fully functional, machine/vehicle number: 106679, Technical Specifications: Work Area - Chuck diameter: 260 mm - Maximum weight: 150 kg - Swing diameter: 280 mm - Maximum workpiece diameter/height: 200/200 mm - X-axis stroke (working stroke): 760 mm / Rapid traverse in X: 60 m/min / Feed force: 6.9 kN - Y-axis stroke: ±30 mm / Rapid traverse in Y: 15 m/min / Feed force: 7.5 kN - Z-axis stroke: 415 mm / Rapid traverse in Z: 30 m/min / Feed force: 18.7 kN - Loading time: 5–6 sec - Standard closed automation (number of loading stations by workpiece diameter): 14 (80–200 mm), 18 (30–160 mm), 30 (30–85 mm) Main Spindle - Spindle interface according to DIN 55026: Size 6 - Maximum speed: 4,500 rpm - Power at 100% / 40% duty cycle: 25 / 18 kW - Torque at 100% / 40% duty cycle: 280 / 200 Nm Turret with Driven Tools - Toolholder interface according to DIN 69880: 12 positions – BMT65 - Number of stations: 12 - Maximum tool length (incl. holder): 200 mm - Maximum speed: 6,000 rpm - Maximum torque at 10% duty cycle: 27 Nm, at 100%: 14 Nm Electrical Equipment - Operating voltage: 400–480 V, 100 A - Connected load: 36 kVA Dimensions & Weight - Overall dimensions: Length = 5300 mm (incl. chip conveyor), Width = 2300 mm, Height = 3650 mm - Weight: 9,000 kg Features and Capabilities: Delhcdwsxw Smbe Nscn - Vertical Design: Optimized for chip evacuation and easy loading/unloading - Control: GE Fanuc FS 32i B - High Precision: Positioning accuracy X/Z axes ±0.001 mm (Heidenhain linear scales) - Main Spindle: High power and broad speed range - In-Process Control: Marposs T25 measuring probe - Automated Loading/Unloading: Emag O-Type with integrated automation for feeding and removing parts - Live Tools: Supports drilling and milling operations - Tool Life Monitoring: Sister tool management - Chip conveyor & coolant filtration unit: Micronfilter with “paper filter,” 40 bar pumps (supports two machines) - Fully enclosed work area, integrated lighting - Documentation: Electronic available, incomplete printed manual Machine Status: - In Operation

Condition: used, Year of construction: 2020, Sled length: 3200 mm Cutting width at the rip fence: 1250 mm Cutting width at the crosscut fence: 3200 mm Cutting depth: 120 mm Scoring saw: yes Dcslhszq Dcuscdw Non Saw blade height adjustment: handwheel Saw blade swivel adjustment: handwheel Rip fence adjustment: manual Crosscut fence adjustment: manual Saw blade angle indicator: scale Cutting height indicator: - Rip fence indicator: scale Crosscut fence indicator: scale Saw blade diameter: 400 mm Speeds: 3 Motor power: 5.5 kW Dust extraction port: 80 and 120 mm Machine length: 3200 mm Machine width: 2200 mm Weight: 800 kg

Condition: used, Second-hand Raimann KS 310 BV multi-blade saw with splinter separator: Raimann ‘Spreiseltrennung 3000’ model and return conveyor. Dcjlhcdjz I S S Njw Nen The machine has been fitted with a new chain. Expected to be available from June 2027 Technical data: - Engine: tba - Cutting width: tba - Cutting height: tba

Condition: used, functionality: unexamined, overall weight: 5 kg, total length: 260 mm, total width: 360 mm, total height: 210 mm, Ferwood Code: RU0009049 - Manufacturer Code: 4-008-39-1470 - Condition: Used - Functionality: Not tested - Compatible Machine: CNC HOMAG - WEEKE - If interested, we offer a refurbishment service, please contact us. Dslez Izhaohcdw Nocn