Friulmac FN3 1300
Gujtzxql
- working length from 26cm to 130cm
- width up to 16cm
- 5.5kW saw motors
- smooth regulation of the feeding speed
A very nice copy
6 shafts: bottom/right/left/top/bottom/right
planing width max. 140 mm
Bxamhzp9lu
planing height max. 120 mm
Chain feed
Spring pressure of the feed rollers
Technical characteristics
Working width: max 230 mm, min 15 mm
• Working height: max 150 mm, min 10 mm
• 2000 mm chrome feed table
• Drive shaft drive shaft 4 kw, speed 6 to 24 m / min
• Chromed toothed feed rollers up to the 1st spindle, rubber after; pneumatic pressure and rise / fall
• Electric height adjustment
• Mechanical display on spindles, except for dressing
• Power supply 400 V, 50 Hz, emergency stop, switches
Composition:
1. Horizontal lower spindle
- 7.5 Kw
- 6000 r...
Four-sided planer
Hbebkh
Little Profimat 22NSerial number: 226 - 3089
Max working width 220mmMax working height 120mmLength infeed table 2000mmThroughput 4-22 m/minSpindle diameter 40mmSpindle speed 6000 U/min
1st spindle, bottom: 5.5kW2nd &: 3rd spindle, left &: right: 11kW4th spindle, top: 7.5kW
Own weight 1600kg
Provisional specification.....
Bvqcuoqtro
220 X 120mm capacity
2m infeed table
4 spindles
Bottom x 5.5kw
Right }
Left } Single x 11kw for right / left spindles
Top x 11kw
Chain drive / spring pressures
6000 rpm x 40mm dia spindles
Feed speeds 6 - 12m/min
Safety cover
Working width 300 mm
Working height 250 mm
Working height 4-side 200 mm
Number of spindles 4
Spindle configuration b-t-r+l
Spindle diameter 60-60-50-50 mm
Jointer for spindle 1-2
Motor power 37-45-11-11 kW
Working width adjustments Digital adjustments
Working height adjustments Digital adjustments
Feed speed 20-200 m/min
Feed motor 15 kW
Bsxlasfibi
Feed-system Cardan
Driven bed rollers 3
Infeed rollers 3
Outfeed rollers 1
Tools horizontal 200x300x60 Z12
Constant table height ca. 900 mm
Chip remo...
- Machine frame
1 Monobloc base frame made of heavy steel.
- The machine frame is made of high-grade steel and is very heavily constructed by, among other things, the application of various sketch plates and reinforcement ribs.
2 The infeed table made of special ground steel length 2500 mm.
- Input table of steel ground length 2500 mm.
- Worktable Herdox HB 400
- Grooved V-belts on all spindles
- Separate motors for each spindle
- Electromotive high/low adjustment incl. feed rollers and pressure...
Upper and Lower Hydraulic Advancement Group.
Bdudwmfh89
Electric command board.
Working range 330 mm
Feed speed 0/100 m / min approx.
Maximum height 130 mm
Maximum width 330 mm
Four-sided planer
Weinig :Unimat 23 E (Blue), serial number :023-2441
Connection diameter extraction 140 &: 200mm
Shaving spindle bottom, top and universal: 240mm
Left and right spindle: 170mm
Workpiece width min/max 20/230
Spindle diameter 40mm
1st spindle, bottom: 11kW
2nd &: 3rd spindle, right &: left: 11kW
4th spindle, right: 5.5kW
5th spindle, top: 11kW
6th spindle, bottom: 7.5kW
7th spindle, universal: 7.5kW
Bxei8a87sb
Motor feeder :5.5kW
Four-sided planer
Futura Module 4 - 220
Max working width 220mmMax working height 120mmSpindle diameter 40mmInput table 2250mm
1st spindle under 5.5HP2nd spindle, right 4HP3rd spindle, left 4HP4th spindle, above 5.5HP
Year of construction 1996380V
Transport dimensions 3400x1100x1600mm, weight 1500kg
Bxei87sooe
Four-sided planer TOS Svitavy Master FWH 18
Width of workpiece max / min - 180/15 mm
Height of workpiece max / min - 120/6 mm
Feed speed - 8/16 m / min-1
Spindle speed - 6000 min-1
Tool diameter - 123 mm
Pkfr2
Diameter of the shaft - 40 mm
Insertion table length - 2500 mm
Number of working spindles - 4
Diameter of the input discs - 120 mm
Min. Length of the machined part - 300 mmEngines:
Lower 5.5 kW
Right 5.5 kW
Left 5.5 kW
Above 5.5 kWCurrent 38-40 Amp, 400VDimensions 3050 * 1250 * 1350mm (L ...
DYRA 40 planing-saw is designed for double-sided planing with simultaneous lengthwise cutting of wooden elements for slats, battens, etc. After dismounting the saws it is possible to use the machine as a planing and thicknessing machine or as a thicknessing machine itself.
The DYRA 40 combination planer consists of three basic processing groups:
levelling machine - processing the workpiece from the bottom
Thickening machine - processing the workpiece from the top while maintaining the required t...
Four sided planer Leadermac 423
Maximum planing width 230mm
Maximum planing height 150mm
Spindle diameter 40mm
Stepless feed regulation
Feed on gimbals
Countertop lubrication pump
Electric lifting of the body
Spindles sequence: bottom/right/left/top
Bvjhpl2ncc
Each spindle on a separate motor
CE
Year 2005
Thickness planer GRIGGIO PSA 520
is optically and technically in a very good, as good as new condition, the machine comes from a small carpenter's workshop with 2 people and has only stood the last years, because the former owner has not found a successor for his company, it has only been used very little
everything works perfectly
with backstroke safety device
the planing knives can be changed very easily, there are 4 normal strip planing knives, you get a setting gauge with it
the chips can be...
planing width 220 mm
Nxo8cvc
planing height 140 mm
tool diameter max 160 mm
2 x 5.5 kW main engines
3 kW feed motor
feed speed 6 - 36 m / min - on the inverter
feed on cardan shafts
heads supported on both sides
electric height adjustment
Working width 1320 mm
Working height 250 mm
Number of spindles 2
Spindle configuration b-t
Jointer for spindle 2
Motor power 15-18,5 kW
Working height adjustments motorized
Feed speed 5-21 m/min
Driven bed rollers 2
Infeed rollers 3
Chip removal bottom 12 mm
Chip removal top 15 mm
Extraction socket diameter 250 - 250 mm
Weight 4500 kg
Dimensions 1850 x 2250 x 2300 mm
Cis9fqtc
Voltage 380V 50Hz 3Ph.
4+1 universal spindles
Working width 220 mm
Bxbegao9x9
Length of the plane in entrance mm 2500
Motorize adjustment of the presser
Diam. of spindles mm 40
Speed variation
Pneumatic pressure of rolls
Cardan drive
Bottom spindle HP 7,5
Right, left HP 10
Top HP 7,5
Universal HP 5,5
Technical characteristics
Profiling kit
electronic height and width adjustment with memory
capacity 230 mm x 130 mm
plan 5kW,
Right spindle and Left spindle 7.5kW,
By8joe8s
planer 7.5kW,
horizontal lower spindle 5.5kW,
universal spindle4kW
lubrication pump
centralized lubrication Entry table length: 2500 mm Number of tools: 6 Power and Motors
Overall dimensions
4-SIDE PLANER MOULDING MACHINE WEINIG UNIMAT 17 A
Technical specifications:
Working width: max 180 mm
Working height: 120mm
Motor power per spindle: 4 KW
Spindle speed: 6000 rpm
Diameter of the spindle: 40 mm
Smallest tool diameter: 100mm
Max. tool diameter: 160mm
Max. diameter of the vertical spindles : 180mm
Max. tool diameter of the 2nd right spindle: 195mm
Gxuprml
Max. tool diameter of the upper spindle: 200mm
Max. tool diameter of the lower spindle: 180mm
Feed speed variable: 6 - 18 m / min...
Technical data:
Max planing width: 180 mm
Bws7zyij9k
Max planing height: 150 mm
Spindle diameter: 40 mm
Number of spindles: 4
The order of the spindles: down, right, left, up
Each spindle on a separate motor
Toothed pulling shafts: 3
Extraction port diameter: 120/150 mm
Smooth feed regulation: 3-20 m / min.
Cardan feed
Pump for lubrication of the working table
Pulling rollers on the table top
Pressure: 6 atm.
Electric lifting of the body
Power supply: 400V
Total power: 12.5 kW
Producer: SCM
Ov...
4-shaft moulder
finished piece max 260 x 180 mm
4 spindles
Bfrpzmxxbm
possibility to profile 45 mm
transport device for a four-sided planer
0d0yweu
The device consists of a transverse feeder with carriers on
chains
longitudinal belt collector behind a planer with a bulldozer
take-up rollers and a second pick-up bulldozer with belt and buffers
working width 8 - 180 mm
max. working height 5 - 120 mm
feed speed 8 m / min.
motor horizontal spindles 2 x 4,0 kW
motor vertical spindles 1 x 5,5 kW
spindle speed 6000 UpM
spindle diameter 40 mm
infeed table length 2000 mm
QTS system (autom. hight and width positioning)
Gcze2wv
Incl. 4 pcs LEITZ Centro-fix tools with new knives
Incl. dust collector hood
weight approx. 1200 kg
machine dimensions approx. L x W x H = 3000 x 1000 x 1450 mm
Advise used machines:
• Technical data without ob...
Technical characteristics
Pneumatical pressure
capacity: 230 x 120 mm
ATS command
composition:
jointer
right spindle
Bximr9yvpw
spindle moulder left electric
upper planer
lower planer Entry table length: 2000 mm Number of tools: 5 Maximum advance speed: 6 à 36 m/min Power and Motors
Voltage: 380 V Overall dimensions
'KUPFERMUeHLE' 4-SIDE PLANER mod. VUIN 1025,
Working width max 1000 mm
Planing heigth max. 200 mm. (4-side)
n.4 Adjustable feed speed from 4 to 18 mts/min.
Motorized bottom and top driving rollers
Bdlsovudoe
Motorized lifting of the working table.
Working table at fixed height
Motor powers:
1st Bottom planer HP 7,5
Bkx2jy9
2nd Upper planer HP 10
3rd Vertical right HP 7,5
4th Vertical left HP 10
Feed HP 2
Lifting HP 1,5
SECOND-HAND MACHINE, in working conditions
Sale of a four-sided planer by order of a customer.
Technical data can be seen on one of the advertised pictures.
K8zqxhnc
Infeeder for moulder
Brand:TP (Swedish made)
Robust compact infeeder for moulder.
The feeding is made through 4 driven rollers. The bottom roller are movable and due to that
the feeding is very safe and reliable.
Frequency controlled gear motors are given a silence and smooth machine.
Feeding speed 5-50m/min
Buffer chains L2100
Shortest material length 400 mm
Power 400 volt, 50 Hz, 3 phase
Stock no:2000534
Imie8ndnu
Fulda 630 double-sided planer
- after the technical review
- German production
- very good condition
- heavy cast construction
TECHNICAL PARAMETERS:
Tuwhrhir
planing width 630 mm
planing height 200 mm
engine power 2 x 5.5 kW
two types of feed speed 10 and 17 m / min
two auxiliary rollers in the table top
three upper steel toothed pulling shafts
upper upper smooth receiving shaft
four knives on the shaft
shaft diameter 125 mm
row of anti-jet pawls
length of the pre-worktop 1000 mm
spigot dia...
Four sided planer Leadermac 723
Maximum planing width 230mm
Maximum planing height 160mm
7 spindles bottom/right/left/right/top/bottom
All spindles adjustable right/left up/down
Spindles diameter 40mm
Pneumatically adjustable spindles
Spindles equipped with brake
Table top adjustable up / down
Central lubrication of the table top
Stepless feed regulation 6-24m/min
Feed on cardan shafts
Electrical planing height adjustment
CE
Year 2006
Jwynz3
Technical characteristics
capacity: max 180 x 120 mm - min 23 x 6 mm
2000 mm infeed table
tool holder: pre-planer, right router, left router, upper plane
powers: 2 x 5.5 hp on horizontal shafts, 1 x 7.5 hp on router
feed speed 6/12 m / min
Bximrdfett
electric height adjustment
router axis stroke for profiling
SIKO mechanical shaft position counter display Number of tools: 4 Maximum advance speed: 6/12 m/min Shaft diameter: 100 mm Power a...
Weinig 6-head
uh, spindles:
down - left - right - up - down - left
spindle number 6
width of the planer ca. 160 mm
Planer height ca. 120 mm
table length ca. 2000 mm
table greasing
feed rate
H2mb3b2
from 6 to 18 m/min.
- With 5 spindels
- Grooved table for short pieces
Outstanding characteristics:
Sealed safety hood to reduce noise levels and prevent chips from splash
Adopting stepless variable feed speed, inverter feed speed of 6- 30 m/min
Each spindle driven by independence motor with powerful cutting
To fit with heavy – duty cutting as equipping with two pairs of high precision bearing at two ends of spindle assembly
Centralized spindle adjustment on the front panel is easy to work
Rmhtmign
Hard Chromed e...
4-sided planing machine
Brand: Weinig
Type: P 26 S
Bubwgq29eq
Year: 2002
Working width 20 - 230 mm
max. working height 120 mm
Feed rate 5 - 24 m/min.
Spindle arrangement:
spindle 1 - bottom - 5,5 kW
spindle 2 - right - 7,5 kW
spindle 3 - left - drive together with right spindle
spindle 4 - top - 7,5 kW
spindle 5 - bottom - 4 kW
feed motor 3 kW
feed speed 5 - 24 m/min.
operating panel SIMATIC OP7
ATS system
automatic positioning for left spindle hight adjustment
spindle diameter 40 mm
rotati...
- max. planing width 220mm
- max. planing height 120mm
- diameter of the spindles 40mm
Jwxuki
- smooth feed adjustment 5-25m / min.
- electrically adjustable planing height
- electrically adjustable planing width
- 5 universal head
Order of heads:
1 Lower 7.5kW
2 Right 11kW motor shared with left head
3 Left as above
4 Mountain 7.5kW
5 Universal 5.5kW
Four-sided planer SCM Superset NT
number of spindles 6
electronic spindle adjustment
powerloock system
many spindles included with cutters
production year 2008
Coq0kep
Technical characteristics
220 x 160
infeed table 2500 mm
short wood presser
air cushion table
double bearing horizontal shafts
motorized height / width
L220 4 kW jointer
straight spindle moulder H 160 4 kW
left rotor 4 kW
top planer 5.5 kW
universal 5.5 kW Number of tools: 5 Shaft diameter: 50 mm Power and Motors
Overall dimensions
Be00bs2
Model Melanto 450-4 four shafts with floating cutters + lower corner edgers.
Consisting of a roller conveyor at the Costa entrance and one at the exit of the Stival
Rocar soundproofing cabin
TO SEE FOR VERIFICATION OF THE EXCELLENT CONDITION OF THE PLANER
Buuzp3exlv
NEGOTIABLE PRICE
Lama machine
G0syft7
- vertically and horizontally adjustable spindles
- planing width 23cm
- planing height 16cm
- bottom 5.5kW, right 5.5kW, left 5.5kW, top 7.5kW
- pulling roller in the table
-chromed tables
-central lubrication of the machine
-pump with liquid to slip the material
-6 drawing rollers with metal rollers in front of the upper head, 2 fights with rubberized rollers behind the head
-heads included
- planing height set electronically from the desktop
Rrutle3
The machine is in very good condition, sol...
MAIN FEATURES :
Capacities:
- Finished wood width 45 to 490 mm
- Finished wood height 12 to 305 mm
Composition:
1 - Lower shaft, power 22 KW (30CV)
Hb8yfzt8m
2 - Upper shaft, power 22 KW (30CV)
3 - Right spindle moulder, power 11 KW (15CV)
4 - Left spindle moulder, power 11 KW (15CV)
5 - Lower shaft, power 18.5 KW (25 hp)
6 - Upper right chamfer
7 - Upper left chamfer
Feeding :
- Metal rollers driven by gimbals
- Power gear motor: 7.5 KW (10 hp)
- Speed variator with potentiometer on the...
Four sided planer Weinig Unimat 23
working width 230 mm
number of spindles 7
spindle arrangement:
Bottom/right/left/left/left/left/left/left/left/left/left/left/l eft/left/left/left/left/left/left/left/left/left/left
total power 59 kw
year of production 1995
spindles revolution speed 8000RPM
Bucrycsay8
smooth regulation of feed speed
Technical characteristics
Inferior planerLeft routerRight routerInferior planerSuperior planerPneumatical pressure
capacity 320 mm x 160 mm
2000 mm infeed table
lower and upper planer with counter bearing
tool holder Ø 120 training in the table spread
Jointer 9.2 kW
Right spindle 8.6 kW
Bximjbvmwy
Left spindle moulder 8.6 kW
spindle moulder plane 9.2 kW
SIKO counter display Number of tools: 5 Shaft diameter: 50 mm Power and Motors
...
surface planer make SAC type FS 430 HP 4
Masch.# 102g.05.84 Year of construction 1984
Technical data:
dressing width 430 mm
Knife of the four-blade shaft 430 x 35 x 3.0 mm
max. fold depth 20 mm
Table length 2900 mm
table length 1550 mm
delivery table length 1310 mm
Table width 430 mm
Cgclrtee
Diameter of the knife shaft 120 mm
Blade shaft speed 4500 rpm.
Table height 800 mm
Dressing fence 1300 x 160 mm
Stop inclination 0 - 45
Drive power 4,0 PS
Weight approx. 745 kg
Outer dimensions approx. 2900...
Moulder 4 heads Master
Puiegu
Maximum planing width: 220mm
Minimum planing width: 15mm
Maximum planing Height : 120mm
Minimum planing height : 6mm
Year of production ~2000
Spindle diameter : 40 mm
Feeding table: 2000mm
Moulder with 4 heads and possibility to mount 5th head
Spindle layout
Bottom Horizontal: 5 kW
Right Vertical: 5 kW
Left Vertical: 5 kW
Upper Horizontal: 5kW
There is a possibility to mount aditional 5th head in the machine.
Machine is in our factory, we bought it new from dea...
