Used Adhesive for sale (575)

Condition: ready for operation (used), Year of construction: 1985, Used folding machine line consisting of: Lifting table with pusher Roller conveyor Feeding unit Transfer system and workpiece pre-cleaning Cjdpfx Ansy Drirj Ujrc Double-end profiler Brand: Homag Type: FG63 Year of manufacture: 1985 Technical Specifications - With adhesive strip application - Machine for profiling and folding trim strips - Milling station on both sides - Control system: Siemens Simatic Touch - Glue application unit - Folding unit for folding pre-folded workpieces - Sliding shoe for pressing - Discharge table for material removal Electric scissor lift table Brand: Altek Year of manufacture: 2014 Technical specifications - Max. load capacity: 1000 kg - With integrated roller conveyor - Dimensions: approx. 3100 x 1000 mm - With height sensor for automatic detection of stack height and corresponding cycle timing Tilting skip Brand: Bauer Type: WU-R 1500 Year of manufacture: 1995 Technical specifications - Capacity: 1.5 m³ Crosscut and miter saw Brand: Bosch Year of manufacture: 2016 Industrial vacuum cleaner Brand: Nilfisk Type: Attik 751-11 3 Panel Transport Carts Brand: Fetra Panel Rack Brand: Robering Type: Dexion D90 Plus Year of manufacture: 2018 Technical Specifications - Consists of 5 uprights - Upright height approx. 4000 mm - Max. permissible shelf load: 3000 kg - Total of 16 crossbeams, length 2700 mm Lot of single-sided pallet trucks - Width approx. 1800 mm - Load depth: between 800 and 1000 mm - Approx. 9 units Aluminum folding ladder Cross-slider - Total length approx. 3000 mm - Roller width approx. 800 mm Used folding machine lineconsisting of:Lifting table with pusherRoller conveyorFeeding unitTransfer system and workpiece pre-cleaningDouble-end profilerBrand: HomagType: FG63Year of manufacture: 1985Technical Specifications- With adhesive strip application- Machine for profiling and folding trim strips- Milling station on both sides- Control system: Siemens Simatic Touch- Glue application unit- Folding unit for folding pre-folded workpieces- Sliding shoe for pressing- Discharge table for material removalElectric scissor lift tableBrand: AltekYear of manufacture: 2014Technical specifications- Max. load capacity: 1000 kg- With integrated roller conveyor- Dimensions: approx. 3100 x 1000 mm- With height sensor for automatic detection of stack height and corresponding cycle timingTilting skipBrand: BauerType: WU-R 1500Year of manufacture: 1995Technical specifications- Capacity: 1.5 m³Crosscut and miter sawBrand: BoschYear of manufacture: 2016Industrial vacuum cleanerBrand: NilfiskType: Attik 751-113 Panel Transport CartsBrand: FetraPanel RackBrand: RoberingType: Dexion D90 PlusYear of manufacture: 2018Technical Specifications- Consists of 5 uprights- Upright height approx. 4000 mm- Max. permissible shelf load: 3000 kg- Total of 16 crossbeams, length 2700 mmLot of single-sided pallet trucks- Width approx. 1800 mm- Load depth: between 800 and 1000 mm- Approx. 9 unitsAluminum folding ladderCross-slider- Total length approx. 3000 mm- Roller width approx. 800 mmNote:The technical specifications and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is not binding.

Condition: excellent (used), Year of construction: 2019, operating hours: 500 h, functionality: fully functional, machine/vehicle number: LU19H00399, input voltage: 400 V, type of input current: three-phase, input current: 26 A, Nordson VPUR-Slug unit. PUR adhesive melter with 5-meter hose and adapter nozzle. Fully functional. 500 operating hours. Single gear pump. Two hose connections. Additionally, includes many new consumable parts and a new 5-meter hose. Cjdpfxjy Hl Nkj An Ujrc

Condition: ready for operation (used), Year of construction: 2018, A Gernep cold glue and self-adhesive labeling machine is available. Rated capacity: 8000bottles/h, direction of rotation: clockwise, control range: 1400-9000bottles/h, bottle format volume: 700ml, tamper-evident label: available, bottle formats: 10, bottle contents: spirits, application: neck ring label/body label/back label/tamper-evident label, including optical label inspection, date coding, self-adhesive dispenser, two cold glue units, bottle counter and two different bottle locks. Documentation available. An on-site inspection is possible. Csdpfxoy N Dd Eo An Uerc

Condition: ready for operation (used), Year of construction: 2017, A Gernep self-adhesive labeling machine is available. Nominal capacity: 2500bottles/h, running direction: RM, throughput capacity control range: 800-3000bottles/h, container format 1 diameter/height: 66mm/280mm, container format 2 diameter/height: 85mm/316mm, container volume 1/2: 500ml/1000ml, label dimensions X/Y: 160mm/17mm, label application: U-seal, conveyor height: 1000mm. Including self-adhesive dispenser unit and swing-top closure alignment. Documentation vorhanden. An on-site inspection is possible. Credpfxey N Ddrj An Usc

Condition: excellent (used), Hydraulic, Plural-Component, Fixed-Ratio Proportioner. For pouring and dispensing sealants and adhesives and polyurethane foam. Model number: HFRB-16 AKAKDBH Part No: UC0465 Series: H15B Serial No: N102 Max motor WPR: 83 bar Max outlet fluid WPR: 206 bar Max air WPR: 7 bar Max operating temp: 77 deg C Max ambient temp: 50 deg C Weight: 395 kg Csdpfx Asixzuzsn Usrc 2 pieces

Condition: good (used), Year of construction: 2016, functionality: fully functional, MPS EF 430/5 FLEXOGRAPHIC LABEL PRINTING MACHINE Machine Overview Manufacturer: MPS Model: EF 430/5 Year of manufacture: 2016 Web width: 430 mm Printing technology: UV flexo / water-based flexo Number of colours: 5 UV printing units + 5 water-based drying ovens Condition: Used, professional production machine Availability: Indicative—September / October, to be confirmed Technical Configuration • 5 x UV flexographic printing units • 5 x drying ovens for water-based inks • Web width: 430 mm • Double die-cutting station • One die-cutting station equipped with K&B GapMaster • Cold foil unit on rail system, movable to the required printing unit • Suitable for self-adhesive labels, filmic materials and high-quality label applications Accessories and Equipment • Double die-cutting station • 1 x K&B GapMaster system • Maxcess longitudinal slitting knife unit • Cold foil unit on rail system • BST TubeScan 100% inspection system • ABG Vectra 430 rewinder • UV and water-based drying configuration • Modern MPS EF platform with advanced finishing modules Magnetic Cylinders • Z96, Z160, Z173 Printing Cylinders: • Z 96 13 pcs • Z 100 6 pcs • Z 120 10 pcs • Z 130 8 pcs • Z 140 13 pcs • Z 144 8 pcs • Z 156 11 pcs • Z 160 5 pcs • Z 170 13 pcs • Z 173 9 pcs • Z 182 13 pcs Sleeves • 13 x Z96, 5 x Z160, 5 x Z173 Anilox Rollers • 1 x 100 L/cm – 8 cm³/m² • 1 x 140 L/cm – 6 cm³/m² • 1 x 160 L/cm – 6 cm³/m² • 3 x 160 L/cm – 8 cm³/m² • 1 x 180 L/cm – 5 cm³/m² • 2 x 180 L/cm – 6.5 cm³/m² • 2 x 200 L/cm – 5 cm³/m² • 2 x 260 L/cm – 5 cm³/m² • 2 x 320 L/cm – 4.5 cm³/m² • 2 x 400 L/cm – 4 cm³/m² • 1 x 400 L/cm – 5 cm³/m² • 2 x 500 L/cm – 5 cm³/m² • 1 x GTTL anilox • 2 x GTTXL anilox Crsdpjy N Tfljfx An Uec Application and Advantages The MPS EF 430/5 is a highly attractive flexographic label printing press with a 430 mm web width, 5 UV printing units, 5 water-based drying ovens and an extensive finishing configuration. The machine stands out due to features such as the K&B GapMaster, cold foil unit, BST TubeScan inspection system and ABG Vectra 430 rewinder. Main Advantages: • Year 2016 – modern MPS EF platform • 5 UV printing units and 5 water-based drying ovens • 430 mm web width • Double die-cutting station, including K&B GapMaster • Cold foil unit on movable rail system • BST TubeScan 100% inspection • ABG Vectra 430 rewinder included • Comprehensive tooling package with magnetic cylinders, sleeves and anilox rollers

Condition: ready for operation (used), Year of construction: 2019, workpiece height (max.): 60 mm, workpiece width (max.): 60 mm, workpiece length (max.): 150 mm, edge thickness (max.): 3 mm, height adjustment type: mechanical, feed rate X-axis: 18 m/min, actuation type: electric, total height: 1,468 mm, total length: 4,412 mm, total width: 1,511 mm, For sale: A Felder Format4 Tempora F600 edge banding machine in very good condition. The machine comes from a professional interior construction workshop and has always been properly maintained and carefully used. The Tempora F600 is renowned as a highly reliable industrial edge bander with a high processing speed (10/18m) and excellent finishing quality. The machine is functioning perfectly and can be put straight into operation. Specifications: Brand: Felder Model: Format4 Tempora F600 Year of manufacture: 2019 Features include: - Smartouch touchscreen control - Program settings with memory function - Anti-adhesive glue application unit - Pre-milling unit - For panels up to 60mm thick - Top and bottom radius trimming unit - Corner rounding unit - Radius scraper unit - Flat scraper unit - Glue residue cleaning unit - Buffing unit - Automatic infeed Suitable for processing: Crsdpfxoy R I Rfs An Uoc - ABS edge banding - PVC edge banding - Veneer edging - Solid wood edge strips Condition: Machine is in excellent technical and visual condition, has always been regularly serviced and cleaned in a professional workshop. Delivery: Machine can be collected as shown in the photos. Inspection: Viewing possible by appointment in Rijnsburg. Transport: To be arranged by the buyer. Available from mid-July. Asking price: € 32,490 excl. VAT.

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, machine/vehicle number: AA100264-11 / AA100264-12, CNC and Extrusion Profile Plant for Automotive Sill Production Comprising: *Processing Machines:* - Anger Machine SP2-X2000 (Machine Number AA100264-11) - Anger Machine SP2-X2000 (Machine Number AA100264-12) - 2x Coolant Treatment Units *Assembly Line (Robotic Cell for Sill Assembly):* - Robot 1: KUKA KR120 R3200 PA - Gripper for Robot 1 - Marking Station - Robot 2: KUKA KR120 R3500 - Gripper for Robot 2 - Robot/Machining Center Interface - Component Cleaning Unit - Dual-lane Assembly Machine - Robots 3 and 4 for Handling - Drawer System with Part Inserts - Screwdriving Station - Adhesive Application Station - Platform Cjdpfjyzh Ulsx An Ujrc - Robot 5 - Gripper for Robot 5 - Pallet Storage Area - Safety Enclosure - Electrical Control and Integration Further information available upon request.

Condition: used, Year of construction: 2017, functionality: fully functional, Machine Type: Automatic single-sided edge banding machine Key Features: Model: K 800R Capacity: 1 unit, net weight 2,472 kg Purpose: Edge banding and processing of wooden and plastic components for the furniture industry Standards: Complies with European safety regulations (CE certified) Equipment & Accessories: AUTOMATIC SINGLE-SIDE EDGEBANDER European safety regulations (CE norms) Codsyxcbhepfx An Usrc Olimpic K 800 "T-ERL" composition (47) Volt 400 EU Frequency 50 Hz "AUTOSET" for ER2, T-ERS and T-ERL compositions "StarTouch" electronic control instead of "Touch 7" Panel spacer on infeed fence Electronic positioning of top presser Horizontal movement of "K-SEL" end cutting unit RAS/S 2P edge scraping unit "AAR" anti-adhesive unit "EASY SIZE" device Edge detecting sensor "IGLUE" kit for gluing unit "SGP" glue pot with manual dosing in substitution of he standard one 2 positions pneumatic kit for RI/800 trimming unit 3 positions pneumatic kit for RI/800 trimming unit Spray-mist device for delicate edges "RCA/2C" glue scraping unit "SPN" brushing unit Edge scraping unit radius = 1 mm Edge scraping unit radius = 2 mm Wood blocks

Condition: good (used), Feutron Temperature Test Chamber: -40 to +100°C Thanks to its robust construction, the Feutron TPK 3403/125 is a workhorse for standardized temperature testing. The primary areas of application for this model are: 1. Electronics and Component Testing This is the most common area of ​​application. It focuses on how components react to extreme temperatures: Functional Testing: Does the circuit board continue to operate flawlessly even at -40°C or +150°C? Burn-In Testing: Artificial aging of components through continuous operation at high temperatures to induce early-stage failures. 2. Materials Testing Investigation of physical changes in materials: Brittleness: Do plastics or rubber seals become brittle in cold conditions? Deformation: Do composite materials warp when exposed to heat? Storage Testing: How stably do chemical substances or adhesives behave over extended periods at a constant temperature? 3. Quality Assurance (QA) Sample Testing: In-process testing conducted alongside production to ensure that manufacturing output adheres to specified temperature ranges. Standards Compliance Testing: Conducting tests in accordance with common industry standards (e.g., DIN EN 60068) that prescribe specific temperature profiles. 4. Research & Development Prototyping: Testing new housing designs or materials under controlled thermal conditions prior to mass production. Manufacturer: Feutron Model: TPK 3403/125 Temperature Range: -40 to +100°C Refrigeration System: Air-cooled condenser Temperature Stability: approx. ±0.1 to ±0.5 K Usable Chamber Volume: approx. 125 liters Refrigerant: R22 Operating Pressure: 23 bar Cjdpfx Ansy Nynas Usrc Power Supply: 220/280V-3-50Hz Input Fuse Rating: 25 A Protection Class: IP 20 Weight: 480 kg "Everything from a single source: We would be happy to offer you suitable bank financing for your project." komplett-konzept.leasingo.de You can find additional items—both new and used—in our shop! International shipping costs available upon request!

Operating hours: 7 h, condition: as good as new (ex-display), functionality: fully functional, Micro-stationary system for the production of a zero joint - jointless optics as if from a single casting A machining table is also available as an option - Heating time:ᐸ30Sekunden - max. edge height 65mm (option 103mm), max. edge thickness 3mm - Processing of so-called "laser edges" (co-extruded and post-coated edges, as well as old-classically pre-coated EVA hot-melt adhesive edges) - higher heat resistance and water resistance Codpfod St R Sjx An Ujrc - perfectly straight, inclined, curved and round panel materials as well as moulded parts can be processed. - sloping cut surfaces of up to 55° (installation in the available table) - high process reliability & lower follow-up costs; - no glue change necessary = almost no set-up costs; - no burning of the glue; - no glue residue on the workpiece - Infinitely variable feed speed from 1 to 5.5 m/min. - continuously adjustable hot air up to 520°C - 230VoltAC, 4m connection cable, compressed air hose - 3,05kW - low air requirement, assembly compressor is sufficient The zero joint unit can be used mobile as well as micro-stationary! Optimal e.g. for larger moulded parts and for use on the construction site. For this purpose, a Systainer with an additional supply line for electricity and compressed air is included in the scope of delivery. The system is also available for retrofitting in an edge banding machine (Hot air, Airtec) - please ask us

Condition: not inspected (used), Year of construction: 2014, functionality: unexamined, workpiece height (max.): 60 mm, edge thickness (max.): 20 mm, feed rate X-axis: 30 m/min, controller model: ICOS OPEN, The machine has the following configuration: Unit: Pre-milling Manufacturer model: 08.379 Motor power: 4 kW Speed: 8,800 rpm Unit: Cut-off saw unit Manufacturer model: 08.42 / 30 / B Number of motors: 2 Motor power: 0.660 kW Unit: Corner rounding unit Manufacturer model: 08.055 Number of motors: 2 Motor power: 1.850 kW Speed: 12,000 rpm Unit: Profile trimming unit Manufacturer model: SKF-L Number of motors: 4 Max. machining speed: 20 m/min Crodpfoyzy Iwox An Ujc Motor power: 0.180 kW Speed: 12,000 rpm Unit: Scraper blade unit Manufacturer model: 08.519 Unit: Glue scraper unit Manufacturer model: 08.521 Unit: Brushing unit Manufacturer model: 08.617-2 Number of motors: 2 Motor power: 0.180 kW Speed: 1,400 rpm TECHNICAL DETAILS Min. panel height: 8 mm Max. panel height: 60 mm Min. panel length: 150 mm Min. panel width: 65 mm Min. edge thickness: 0.3 mm Max. edge thickness: 20 mm Max. feed speed: 30 m/min MACHINE DETAILS Control: ICOS OPEN EQUIPMENT Magazine for coil material Tank for hot-melt adhesive Edge pressure roller unit Pressure by rubberized belt The machine is sold and delivered in its actual and legal condition ("as seen and approved") based on photographic documentation and technical/commercial documents of descriptive character. The buyer has the right to inspect the goods prior to collection and assumes responsibility for the installation, securing, and operation of the machine at the destination. External reference: 6089

Condition: new, Year of construction: 2025, functionality: fully functional, machine/vehicle number: MZTF01, Equipment: CE marking, The fully automatic tube filling and sealing machine is a highly automated device for filling and sealing cylindrical metal tubes or composite tubes with paste materials. It adopts SS304 piston pump to fill the paste materials driven my servo motor, that meets GMP standards, and high accurate in filling. It uses PLC programmable control and a photoelectric identification mechanism for accurate and reliable trademark positioning; it uses frequency conversion speed regulation, a composite opening mechanism for indexing and positioning, and is equipped with the latest international folding and sealing mechanism.Widely used in cosmetic, chemical, adhesive and food industries. Crodpfx Anjxum Alo Uoc

Condition: used, Holz Her STREAMER 1057 XL FÜ + PU Edge thickness: 0.4 - 6 mm Modern control unit with selector switch for aggregate settings Fully automatic edge magazine for roll and strip material Glue application station GLU-JET cartridge + PU bonding Adhesive application via nozzle technology Touch-sensitive nozzle Workpiece height: 6-60 mm Automatic glue height adjustment High-quality 3-roller pressure unit, 1st roller motorized Pneumatic end trimming unit for roll and strip material up to 6 mm edge thickness Pneumatic adjustment of trimming saws from 0-10° angle Milling unit: flush trimming 6 mm, radius milling - bevel milling - 15° Corner copying unit - 3 mm edge thickness Scraper unit for chamfers and radii with 2 scraper holders Surface scraper unit - finish Buffing unit Spraying device in infeed and outfeed areas, as well as for PU Codjywh Epjpfx An Uorc Machine supplied with all working units/tools Machine is WORKSHOP TESTED First delivered in 2016 Available ex stock Lieboch

Condition: used, The Robatech Roba 40 nozzle glue system is a specialized adhesive application system designed for precise and efficient gluing operations. Manufactured by Robatech, this model is located in Germany, with pricing available upon request. The system is equipped with a 40 nozzle configuration, ensuring accurate and consistent adhesive application for various industrial and manufacturing needs. Format: Equipment: 40 nozzles for consistent adhesive application Codpovphzisfx An Ujrc

Condition: used, The Eigenbau (Self-build) Perfect binder with PUR is a specialized binding machine designed for precise and efficient bookbinding. This machine is manufactured by Eigenbau and features a perfect binding mechanism with PUR (Polyurethane Reactive) adhesive, ensuring durable and high-quality binding. The machine has a format of 100 mm and is currently available in stock. It is located in Germany, and the price is available upon request. The delivery terms are FCA (Free Carrier), meaning the seller delivers the goods, cleared for export, to the carrier appointed by the buyer. Key features of the Eigenbau Perfect binder include a centering function for accurate alignment, a heating roller for optimal adhesive application, and a miniature circular saw for precise cutting. Additionally, it comes with a paper unwinding mechanism and a PLC (Programmable Logic Controller) for automated control. There is also an optional INATEC BS 25002 PUR system available for an additional 1500 EUR, which can enhance the binding process. The machine is equipped with an input station that includes a plate lifting station for efficient material handling. Format: 100 mm Codpfevfx Rtex An Uorc Equipment: Centering function Heating roller Mini circular saw Paper unwinding SPS control Optional INATEC BS 25002 PUR ( 1500 EUR extra) input station with plate lifting station

Condition: used, Year of construction: 2004, Format: 320 ?? 550 mm Equipment: Sheet feeder: Two drum feeders with gripper system Belt conveyor channel for product conveying Surface with rice paper structure to protect the product Front stop made of aluminum Side guides with sorting screws for sheet positioning Screw ejector for precise bow positioning Sheet control system: Double sheet inspection using mechanical thickness measurement Misaligned bow detection using photocell Photocell-controlled activation of the second feeder and glue injection timing Glue unit: Hot melt or cold glue application (configurable) Glue injector with digital keyboard setting Delivery: Double roller press station for optimal adhesion Inclined conveyor belt for shingled product stacking at the exit Control system: SPS control unit Touchscreen control panel Safety system with light barriers Technical data: Min. Format 100 ?? 150 mm Max. Format 320 ?? 550 mm Max. sheet thickness 5 mm Crodsyxqxbopfx An Uec Maximum mechanical speed 6,000 cycles/hour

Condition: used, Year of construction: 2005, Format: 320 x 480 mm Equipment: Quality control: Semko ASIR III Feeder: Number of feeder: 9 x 370 cover feeder 1x 1529 Card adhesive: 1x 423 AMRYS - Automatic Make Ready System Stitching unit: Typ: Prima Plus Amrys 390 Cjdpfsyxqvmex An Uerc 2x stitching heads AMRYS - Automatic Make Ready System Delivery: Typ: Rapido 7525 year: 2001 serial number: MMZO 490 194 Display direction: left Technical data: Format min: 90 x 105 mm Format max: 320 x 480 mm Maximum mechanical speed: 14,000 cycles/hour. Three-knife Typ: Mueller Martini 449 AMRYS - Automatic Make Ready System

Condition: used, Year of construction: 2016, The Gallus TCS 250, manufactured by Gallus in 2016, is a high-performance label printing press designed for efficiency and precision. With a format of 265 mm and a print count of 2 million, this machine is currently available in stock and located in Germany. This press is equipped with a range of advanced features to meet various printing needs. It operates at a speed of 11,000 impressions per hour and has a cylinder circumference of 254 mm, accommodating a web width of 265 mm. The hotfoil stamping speed is 8,000 cycles per hour, with a maximum print size width of 265 mm and a minimum of 130 mm, allowing for precise format adjustments in increments of 0.01 mm. The machine operates at a voltage of 400V for the main unit and 230V for peripherals, with a net frequency of 50Hz. Key features include a feeding unit with web cleaning, corona pretreatment for enhanced adhesion, and trimming and suction capabilities. The press can handle paper weights ranging from 80 to 180 g/qm2 and carton up to 300 g/qm2 with a maximum thickness of 0.3 mm. It is compatible with commercially available adhesive bonds and supports UV offset printing. The configuration includes 4 printing units, 1 coating unit, 1 rotary die cutter unit, and a rotary hotfoil embossing unit. Csdpfx Anjvfx A As Ujrc Additional features include web inspection via the Powerscope 4000 manual system, a Uviterno Coldstar water-cooled drying model with UV capabilities, 4 trimming knives, mesh pulling monitoring, and an IR dryer. The maximum web diameter is 800 mm, and the press is equipped with remote maintenance capabilities, a plate tool, and maintenance tools for ease of use and upkeep. Format: 265 mm Equipment: Speed: 11.000 T/h Cylinder circumference: 254mm Web Width: 265mm Hotfoil Stamping Speed: 8,000 cycles/h Max print size width: 265 mm Min print size width: 130 mm Format length graduation: 0,01 mm Machine Voltage: 400V Voltage Peripherals: 230V Net Frequency: 50hz Feeding Unit Web Cleaning Corona Pretreatment Trimming and Suction Paper: 80 bis 180 g/qm2 Carton: up to 300g/qm2 at max. 0.3mm Adhesive Bonds: commercially available UV Offset Printing Units: 4 Coating Units: 1 Rotary Die Cutter Units: 1 Rotary Hotfoil Embossing Unit Web Inspection Web Inspection type: Powerscope 4000 manual Drying Model: Uviterno Coldstar Water cooled IR or UV: UV Trimming Knives: 4 Mesh Pulling Monitoring IR Dryer Max. Web Diameter: 800mm Remote Maintenance Plate Tool Maintenance Tools

Condition: used, Year of construction: 1989, Used machine Compact machine for processing molded parts Processes edge material coated with hot-melt adhesive, which is reactivated by hot air Automatic workpiece feed is achieved by pressing the workpiece against the central, driven pressure roller, ensuring uniform adhesive reactivation and consistent bonding reliability Thermostatic temperature control via analog thermostat Maintenance-free three-phase hot air blower for continuous operation Automatic airflow redirection Pneumatically operated roller separating device cuts even the toughest veneer and PVC edges Foot switch for molded part processing Workpiece thickness: 10 - 50 mm Heating output: 3 kW Connection load: 3.3 kW Crjdowwxykjpfx An Usc Minimum workpiece width: approx. 25 mm Edge thickness: approx. 0.5 - 1 mm Minimum internal radius: approx. 25 mm Feed rate: 4 m/min Pneumatic system: 6 bar Weight: approx. 105 kg Availability: short-term Location: Röllbach

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, number of ink cartridges: 7, color channels: CMYK + Light Cyan/Magenta + Latex Optimizer, number of print heads: 6, resolution (max.): 1,200 dpi, paper width (max.): 1,630 mm, Equipment: documentation/manual, For sale due to new purchase: HP Latex 365 large format printer in excellent condition. This 64" roll-to-roll latex printer has printed only 8,708 m² over its entire lifetime—a fraction of its full capacity. Practically as new in terms of wear. The HP Latex 365 is a versatile production printer suitable for both indoor and outdoor applications. Thanks to the water-based HP Latex inks, prints are odorless, instantly dry after production, and GREENGUARD GOLD certified for use in sensitive environments such as healthcare facilities, schools, and offices. Technical specifications: - Print width: up to 1.63 m (64") - Ink system: 6 printheads, 7-color HP 831 (CMYK + Light Cyan/Magenta + HP Latex Optimizer) - Ink cartridges: 775 ml Crodpey Nngqofx An Ujc - Print resolution: up to 1200 × 1200 dpi - Production speed: up to 91 m²/h (max), 31 m²/h outdoor production, 17 m²/h indoor quality - Media handling: roll feed, take-up reel, automatic cutter - Integrated i1 spectrophotometer for automatic ICC color calibration - Control panel: 8" touchscreen - Connectivity: Gigabit Ethernet, HP Latex Mobile App supported - Suitable for: banners, self-adhesive vinyl, films, paper, wallpaper, canvas, synthetics, mesh, textiles—including porous fabrics via the included ink collector. Included: - HP Latex 365 printer - Take-up reel / winding system - Ink collector kit for textile applications - Spindle, edge holders, loading accessory - User documentation and power cables - Any remaining ink stock negotiable Reason for sale: upgrading to a larger production machine. Viewing and live demonstration possible by appointment. Delivery and installation assistance available for a fee within the Benelux.

Condition: excellent (used), Year of construction: 2002, Maximum jumbo roll width 1300 mm Jumbo roll diameter max 1000 mm (1200 mm without splice table) Csdpfx Anoxyihno Usrc Winding diameter max 600 mm Operating speed 300 m/min Cutting width possible from 20 mm Year of manufacture 2002 Accessories: - 1 unwind tension shaft D 76 mm - 2 friction winding shafts D 76 mm - 10 upper and lower knives - 1 edge guiding system - 1 cutting table - 1 extraction system for edge trims - silicone-coated guide rollers, suitable for adhesive tapes - with documentation

Condition: new, Mini Cable Recycling Line with a capacity of 50-80kg/h The set includes: 11kW grinding mill - TORNADO 320 Compact dust removal system Belt conveyor Codov I Skropfx An Usrc Water separator - GOLD RIVER 300/1250 Technical data of the installation: Installed power - 13kW Power supply - 400V; 50Hz Batch efficiency - 50kg/h (this is a real value, checked on basic materials). Dimensions - 3500x3600x1950mm Weight - 950kg Spare consumables included. This is a set of high-quality devices created for cable recycling. The basis of the entire recycling process is proper fragmentation and separation, TORNADO series grinding mills have been designed so that the input material leaves the chamber in a short time, the enlarged sieve area and balanced rotation of the cutting rotor provide us with uniformly cut material fractions. The use of an innovative water system with pressure control valves in GOLD RIVER series separators allows for very precise separation of materials that are difficult to separate. The introduction of a new separation mat solution in combination with several other technical parameters allows for the separation of a single copper wire with a thickness of 15 microns [µm]. At the same time, maintaining the ideal purity of the plastic. Solid Polish workmanship supported by experience ensures a very long service life. The materials used for production are carefully selected in terms of type and meeting the appropriate strength parameters. We provide full post-warranty service throughout the country, we have every part for the offered devices. Recyclable materials: Aluminum cables of all kinds Car harnesses with adhesive insulation Computer tapes Network and telephone cables Coaxial cables, Christmas tree lights Copper wires filled with silicone or gels 15-micron winding coils, contaminated with plastic and sticky paper Winding coils filled with silicone coating IMPORTANT!! We provide real performance!

Condition: used, Year of construction: 2011, Overview This rotary labelling machine (cold glue + self-adhesive) was manufactured in 2011 by Germany GERNEP. The machine is designed for high-speed labelling of glass bottles, particularly in the spirits industry. It combines cold glue and self-adhesive labelling technologies, allowing flexible application of multiple label types including body, back, neck ring and additional labels. The machine is equipped with 2 cold glue aggregates and 2 self-adhesive labelling units (HERMA). Technical data Capacity: approx. 12,000 bottles/hour Speed range: approx. 3,000 – 18,000 bottles/hour Formats: 700 ml / 750 ml / 1,000 ml glass bottles Application: Labelling of glass bottles (spirits) Configuration: Rotary machine, 2 cold glue units + 2 self-adhesive units (HERMA) Label positions: Body (front), back, neck ring, additional labels Utilities: 400 V Scope of Delivery  Labelling machine | GERNEP | Labetta 6/4/22 1056 2A 2SK SD | 2011 | Rotary labeller with cold glue and self-adhesive units Self-adhesive units | HERMA | 2 units, up to 70 m/min Control system | B&R | Touch panel control Crodpfjyy Ad Ssx An Ujc

Condition: ready for operation (used), Year of construction: 2025, An integrated packaging system Soco consisting of a carton erector and a carton sealer is available. 1) Bottom flap folder Soco F-100P, min. carton width: 320mm, max. carton width: 520mm, max. carton length: 900mm, machine dimensions X/Y: approx. 750mm/1150mm. 2) Carton sealing machine Soco T-402 5-5-7, carton length range: 200mm-750mm, carton width range: 120mm-460mm, carton height range: 95mm-470mm, sealing capacity: 18/min, max. adhesive tape roll diameter: 385mm, weight: approx. 200kg. Including safety guarding, roller conveyor and transfer unit. The system is as new and has only been in operation since January 2026. Documentation available. An on-site inspection is possible. Crodpfjy Hk Tnex An Usc