Used Adhesive for sale (646)

Condition: new, neu ca. 2 - 4 Wochen ab Auftr 4400 € 2400 x 1200 mm 850 mm 8000 kg 945 kg 200 mm 28 mm - Fully milled table top 25 mm in S355J2+N with high degree of accuracy (+/- 0.05 mm) and rounded edges and holes - Hard chrome-plated table surface Cr75 The main advantage of our tables compared to conventional systems is with the hard chrome plating Cr75, that this process achieves a much deeper penetration into the base material of up to 0.07 mm and the hardness of the surface reaches up to HV750. This also ensures optimum and lasting anti-spatter adhesion on the surface, which is one of the most efficient on the market. - Exact dimensional and fitting accuracy of the tools with 28 mm perforation (compatible with comparable premium suppliers) - Grid lines 100 x 100 mm - 4 solid table feet withload capacity 2 ton/feet and levelling option - Different foot variants available (standard, height-adjustable and with castors) Crjdpfxewiriis Abcjh - Load capacity 8 to - All-round 200 mm high side cheeks with diagonal perforation - 2-sided millimetre scaling - Substructure with stiffeners

Condition: used, Number of sanding units 2 st. sanding width 190 mm Sanding height max. 4-180 mm HESS - GLORIA 2 BELT SINGLE WOOD SANDING MACHINE ----- Machine is being checked! Manufacturer's description: ----- Compact design designed according to modern principles. Quiet and vibration-free operation thanks to rigid, stable machine housing and special insulation. Work safety device in accordance with the EC Machinery Directive with the "dust-tested" certificate. Offset grinding units with large-dimensioned tension rollers for good heat dissipation and stable sanding belt guidance. Sanding units with forced sanding belt oscillation. 2-point sanding dust extraction directly on the sanding roller. Airborne dust extraction on the large tension rollers. Integrated sanding belt blower for longer service life of the sanding belts. Integrated brushing and finishing device, adjustable via threaded spindle, with large dust extraction. Motorized grinding thickness adjustment of the entire upper unit via precision threaded spindles and linear ball sets on hardened and ground precision shafts with dust and dirt protection. Electronic digital display for workpiece thickness (resolution 0.1 mm). Contact roller and grinding shoe in a balanced ratio to the grinding belt grain load. Hardened and ground grinding rollers. Maintenance-free and wear-free oxide ceramic grinding shoes (DBGM) with excellent sliding properties, good heat dissipation and high dimensional accuracy. Grinding belt tension via pneumatic cylinder. Grinding belt change via pneumatically controlled belt relaxation. Ability to adjust the grinding belt run when changing the belt. Electro-pneumatic pressure monitoring of the compressed air supply with visual fault display. Automatic machine stop triggered when sanding belt breaks and by run-in protection with integrated wood thickness control. Optical display on the control panel. Feed device and proven, calibrated non-slip and non-adhesive transport belts on precisely ground tables and spring-loaded pressure rollers. Cardan shaft drive for even wood transport. Feed speed continuously adjustable. Chip removal adjustment bottom via precision threaded spindle with dimension display via scale ring (resolution 0.1 mm) Ergonomic arrangement of the operating and setting elements on the machine front: sanding unit and brush device at the top, sanding unit and brush device at the bottom, workpiece transport device, sanding thickness setting, operating display, fault display. Control and operating unit with lockable main switch built into the machine housing. All motors electrically protected against overload. Technical data: ----- Grinding belt speed: 24 m/sec. Grinding width: 190 mm Grinding thickness: 4 - 180 mm Shortest workpiece length: 300 mm Feed speed: Continuously adjustable 5 - 25 m/min. Sanding belt dimensions: 200 mm wide 1600 mm long Electrical connection: 400 V, 3/N PE, 50 HZ Crjdpjv D Rg Dsfx Abcjh Grinding units: 2 x 4 kW Feed: 0.75 kW Height adjustment: 0.18 kW Pneumatic connection: R 3/8", 80 NL, 8 bar Extraction air volume: 2 x 2000 - 2500 m3/h 20 - 25 m/sec. Extraction connection nozzle: 2 x 160 mm diameter at the top of the machine housing External dimensions: Length: 1600 mm Width: 1030 mm Height: 1820 mm Height with extraction...

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, ID BYP01 We sell a used Chinese - PP melt-blown fabric extrusion line for melt blown, make: Zhangjiagang Sevenstars Machinery Co., Ltd., MFG 2020. It was used for a short time. excellent condition. All EU import duties have been paid. Output max 400 kg per 24 hours. General description: 1. Product size: PP melt blown fabric with width at 600mm (after trimming 17m*3) 2. Main Material: PP compounding material 3. Extruder type: SJ65/33 single screw extruder 4. Output capacity: 350-400kg/24hour Cedouiq Dhjpfx Abcsrh 5. Electric power supply: 3phase, 380V; 50Hz 6. Additional equipment: • Vacuum feeder • Raw material dryer • Mesh manual filter • T-mould for melt blown fabric • Static electrical discharge equipment • Belt type forming 850mm • Collecting device • Winder and slitting Model L/D Output Speed of Screw Rotationl Power Center Height SJ-65 10-33 80-150kg/h 20-120r/min 18.5kw 1000mm This line contains the following machines: Automacic vacuum loader ZJ-400 and hopper dryer make RHONG model RDM-25, MFG 2020; Single screw extruder, model SJ65/33, MFG 2020; Heating oven for hot air, model HJGF101-4, MFG 2020; Extrusion T-mold, model: SUS630, made in Japan, MFG 2020; Forming device, MFG 2020; Winder & slitting system, MFG 2020; Oil free air compressor, MFG 2020; The PP melt blown nonwoven production line is a polymer melt extruded from a screw extruder. The polymer is extremely stretched by high-speed hot air or other means to form very fine short fibers, which are aggregated to A web is formed on a roller or a screen curtain, and is finally reinforced by self-adhesion or thermal bonding. Its unique properties are widely used in mask filter materials, thermal insulation filling materials, medical health materials, wiping materials, etc. The finished product can pass the N95 standard as the core material of the mask. Process of melt blown nonwoven production line Polymer preparation --- Melt extrusion --- Metering pump --- Melt blown die head assembly --- Solution thin-flow drawing --- Fibber cooling --- Auxiliary network --- Electrostatic electret --- Reinforced finished product. Melt-blown cloth is produced by melt-blown process. The equipment mainly includes: screw extruder, melt pump, screen changer, melt-blown device, winding device, air system (hot air blower and heater), etc. The function of the screw extruder is to melt the slice material; the role of the melt pump is to accurately measure, control the output and the fineness of the fiber, and continuously and evenly transfer the melt to the spinneret. The function of the screen changer is to filter out impurities in the melt so as not to block the spinneret holes. The function of the winding device is to pack the melt blown cloth into rolls. The function of the air system (hot air blower and heater) is to provide the temperature and pressure of the hot air used in the drawing of the spinning air stream. Price Euro 39.200 Euro + VAT, negotiable, FCA: Oradea / Romania Irrtum, Anderungen und Zwischenverkauf vorbehalten / Subject to errors, changes and prior sale / Ne rezervăm dreptul la greșeli, modificări și vânzare We speak English. /Wir sprechen Deutsch./ Beszélünk magyarul. /Nous parlons français/Vorbim romana

Condition: refurbished (used), Year of construction: 2000, operating hours: 1,000 h, functionality: fully functional, machine/vehicle number: 5408, type of input current: AC, input voltage: 230 V, compressed air connection: 8 bar, input frequency: 50 Hz, Self-adhesive labeling machine with shrink capsule applicator 2 label rolls for front and back label Crjdpfx Ajq Huzljbcjh collecting table

Year of construction: 2025, condition: new, With its additional module, the Box Plus 2 enables the production of folding boxes with longitudinal seam and hotmelt and folding bottom (automatic bottom). Crodohflybjpfx Abcoh Mailing bags, envelopes, folders, covers and the like can be glued, folded and taped in one operation when using the appropriate optional accessories. RAP applicators for dispensing double-sided adhesive tape, tear tape or silicone tape can also be integrated into all box models as optional accessories, so that glue and tape can be applied in a single operation. You are welcome to send us samples and we will clarify the suitable machine configuration with APR Solutions. There are different models of these machines. Please contact us which one is the right one for you. Note: Some of the machines shown above also include optional accessories that are not included in the base price.

Condition: excellent (used), Langguth E 36 XPSP Labeler Csdpfx Abel D Namocjrh Labeler for self-adhesive labels, adhesive labels dispensing via vacuum plate mobile on rolls Very good condition, directly from the Produktiion!!!

Condition: new, neu ca. 2 - 4 Wochen ab Auftr 6400 € 123.52 € 3000 x 1500 mm 850 mm 8000 kg 1544 kg 200 mm 28 mm - Fully milled table top 25 mm in S355J2+N with high degree of accuracy (+/- 0.05 mm) and rounded edges and holes - Hard chrome-plated table surface Cr75 The main advantage of our tables compared to conventional systems is with the hard chrome plating Cr75, that this process achieves a much deeper penetration into the base material of up to 0.07 mm and the hardness of the surface reaches up to HV750. This also ensures optimum and lasting anti-spatter adhesion on the surface, which is one of the most efficient on the market. - Exact dimensional and fitting accuracy of the tools with 28 mm perforation (compatible with comparable premium suppliers) - Grid lines 100 x 100 mm - 4 solid table feet withload capacity 2 ton/feet and levelling option - Different foot variants available (standard, height-adjustable and with castors) - Load capacity 8 to Codpfx Abewiricscerh - All-round 200 mm high side cheeks with diagonal perforation - 2-sided millimetre scaling - Substructure with stiffeners

Condition: used, Number of sanding units 4 St. sanding width 190 mm Sanding height max. 180 mm Control ja weight 3300 kg Dimensions (L/W/H) 2600x920x1890 mm Dust suction hood 2x180, 2x120 mm Double sided grinding machine Löwer DSM 2004 Double-sided four-band single-wood sanding machine for sanding Solid wood, e.g. Window wood etc. Highly stable top model with innovative details. Suitable for high Continuous load even at higher chip removal rates. - Successively arranged grinding units for rough grinding, fine grinding and finish sanding, each from above and below 1. Belt sanding unit with heavy steel roller 2. Belt sanding unit with rubberised roller and shoe 3.Finish aggregate with fiber brush - Direct driven wheels for slip-free power transmission - Maintenance and wear-free CERMET-coated sanding shoes with very good thermal conductivity and absolute dimensional accuracy - Foreign cooling of the grinding zones for a cooler grinding and higher Sanding belt life - positively driven pneumatically controlled grinding belt oscillation - effective sanding dust extraction directly on the sanding rollers - Dust extraction on the tension rollers - integrated brushing and finishing device with large sanding dust extraction - Motorized grinding thickness adjustment via precision threaded spindles and large dimensioned linear ball bearing sets on hardened and ground precision shafts with dust and dirt protection - Adjustment of chip removal below via precision threaded spindle with dimension display via scale ring (resolution 0,1mm) - Grinding belt tension via pneumatic cylinder with constant clamping pressure - Abrasive belt change with pneumatic belt release in seconds - Adjustment of the grinding belt when changing the belt - Electropneumatic compressed air monitoring - Overflow protection via contact roller for workpieces that are too thick - Workpiece transport via calibrated non-slip and adhesive conveyor belts over heavy, cast tables with finely planed surface and sprung Pinch rollers with fine adjustment - Cardan shaft drive for jerk-free and uniform workpiece transport - Feed gear motor with stepless speed 4-20 m / min - all motors are electrically protected - ergonomically arranged controls - digital strength display (resolution 0.1mm) with modern magnetic tape system Csdpovu Hgbefx Abcjrh Technical specifications: - Sanding belt speed 22 m / s - Sanding belt length 1800mm - Sanding belt width 200mm - Working width 190mm - Abrasive thickness 2-180mm - four brake motors for drive 5.5 kW - Feed motor 1.5 kW - Feed rate 4-20 m / min. - automatic height adjustment 0.37 kW - two brush sets with fiber brushes D 120 x 200mm à 0.37 kW - Exhaust nozzle 2 x 180mm 2 x 120mm - Extraction air speed 20 m / s - Pneumatic connection 6 bar - Working height 870mm - Length (with Softdisc 2740mm) 2600mm - Length with control panel (with Softdisc 3035mm) 2985mm - width 880mm - height 1910mm - Weight about 3300 kg - Operating voltage 400 volts, 50 Hz, 3P - CE version Equipped with the following options: - Sanding belt blow 4-band via nozzles directly at the radii of the tensioning rollers within the extraction system arranged, separately switchable - Disc unit for defibering - two grinding disc discs with 200 mm diameter (maximum grinding width 180 mm) - adjustable laterally and in delivery - including frequency converter for stepless speed regulation instead ...

Year of construction: 2013, condition: excellent (used), machine/vehicle number: 181941, Air Delivery System: Re-circulating Temperature range: +/- 8°C from ambient within a programmable range of 19 – 30°C Temperature control: +/- 0.5°C Cooling Capacity: 2000W Temperature Sensor: shared output from integrated printer sensor (0 – 10V input over 0 – 50°C) Air In Filter: G4 (91% Average Arrestance) EN 779: 2002 Refrigerant Gas: R134a 0.75Kg Full load current: 12.6A Start Up Current: 20A Frequency: 50 / 60Hz Voltage: 230V +/- 10% (207V – 253V working range) Single Phase Acoustic Noise: > 75dB Dimensions: 1300mm High (+ beacon), 510mm, 540mm Condensate: Collected in 5 litre container for disposal or piped to drain Weight: 100Kg Documentation not included the TCM is a precision temperature control module designed to enhance the Print Process by providing a highly stable and accurately controlled air temperature within DEK's range of printers. The operating range of the TCM offers wide control of the process s temperature either side of factory ambient. As applications become more varied the requirement to produce high yield results can be aided by the ability to heat as well as cool from factory ambient. Adhesive printing for example benefits from a temperature in the 25-30°C range, which is generally higher than conditioned factory ambient. Conditioned air is fed from the TCM into the print area and returned via ducting located beneath the printer. Ducting design has been formed to achieve minimal airflow rates over the process area prolonging tack performance of solder pastes and increasing stencil life. Due to its optimised design and re-circulating system the TCM is energy efficient and requires minimal input power from a single-phase mains supply. Exhaust air is vented through the top of the TCM alleviating the need for any connection to factory extraction systems. The TCM will automatically shut down following a predetermined delay if the printer is powered down or covers are left open. To monitor process temperature the TCM utilises the output from the printers integrated Temperature Sensor located on the print carriage resulting in accurate feedback and control. To prevent process contamination conditioned air is passed through a filter before entering the printer. The possibility of process contamination is further reduced due to the TCM maintaining a higher air pressure within the printer compared to the surrounding environment thus limiting the ingress of airborne particulates. The Modules operating status is indicated by provision of a 'four colour' beacon clearly visible to line operators. Any condensate produced can be gravity piped to drain or collected in an easy to empty 5-litre container. Two sensors monitor condensate level and give a warning via the beacon when container requires emptying. The TCM will automatically shut down if the container is not emptied to prevent overflow. Sales price: 1900 Euro + VAT, negotiable, FCA Oradea, Romania Irrtum, Anderungen und Zwischenverkauf vorbehalten / Crjdpfx Abshg Rcxscoh

Year of construction: 2004, condition: excellent (used), pneumatic race LARIUS 10:1 For sale pneumatic press from the renowned company LARIUS, manufactured in Italy. The device is designed for pressing high-viscosity liquids - ideal for greases, adhesives, industrial paints, silicones, etc. Crsdpfx Abjwqx H Receh Technical data: • Ratio: 10:1 • Max. liquid pressure: 70 bar / 1015 psi • Air working pressure: 3–7 bar (40–100 psi) • Capacity: 12 l/min at 60 cycles (3.2 gal/min) • Year of manufacture: 2004 • Production: LARIUS - Italy Very good condition

Year of construction: 2008, condition: used, Fully automatic carton sealing machine for gluing on top with self-adhesive tape • Running direction from right to left • Carton size range width 100- 500 mm, height 100 - 500 mm, length 150 - 760 mm • Output 20 cartons/min • Flap folding device Cedpfx Asimbdbebcorh • Drive 400V/50Hz • 2 conveyers with length 4.30 m/2.50 included can dryer system • CARTON BOX SEALING MACHINE COMARME B52

Year of construction: 2014, condition: used, functionality: fully functional, machine/vehicle number: MN 141360, Offer for Sale – FillMatic MSE 220R We are offering for sale a FillMatic MSE 220R mattress core stacker, a fully functional machine ready for immediate operation after connection. The equipment is intended for gluing mattress cores and ensures their automatic stacking at the end of the production line. Location: Slovakia – Oravské Veselé 02962 Basic Technical Data: • Machine No.: MN 141360 • Machine type: SRA 200 • Power: 4.8 kW Csdpfxjxgd Hfo Abcsrh • Voltage: 400 V • Year of manufacture: 2014 Machine Description: The FillMatic MSE machine serves as a mattress core stacker. • It is designed to prevent damage to still-fresh adhesive seams during handling – an ideal solution for placement directly after the gluing section of the line. • Allows stacking to an adjustable height, with access from three sides depending on the safety guarding configuration. • The FillMatic MSE designation refers to a series of stacking or folding machines that can be combined or customized according to production requirements. This specific model is a combined version – a mattress core gluer with end-of-line stacking, making it suitable for efficient production and labor savings. The equipment is in good technical condition and ready for immediate deployment in your production process. For more details or if you are interested, please do not hesitate to contact us.

Condition: new, neu ca. 2 - 4 Wochen ab Auftr 1190 € 1000 x 1000 mm 850 mm 210 kg 25 mm 28 mm - Fully milled table top 25 mm in S355J2+N with high degree of accuracy (+/- 0.05 mm) and rounded edges and holes - Hard chrome-plated table surface Cr75 The main advantage of our tables compared to conventional systems is with the hard chrome plating Cr75, that this process achieves a much deeper penetration into the base material of up to 0.07 mm and the hardness of the surface reaches up to HV750. This also ensures optimum and lasting anti-spatter adhesion on the surface, which is one of the most efficient on the market. Cedjwirg Ujpfx Abcorh - Exact dimensional and fitting accuracy of the tools with 28 mm perforation (compatible with comparable premium suppliers) - Grid lines 100 x 100 mm - 4 solid table feet with levelling option - Different foot variants available (standard, height-adjustable and with castors) - Load capacity 500 kg/m²

Condition: like new (used), Year of construction: 2023, machine/vehicle number: MH-FJ-2_Vorführ, Our VOGEL MH-FJ-2 demonstration case sealer is equipped with a side drive belt system. The machine automatically adjusts to the respective carton size within the specified range. Carton formats: Length 150 - ∞ mm Width 140 - 480 mm Height: 120 - 480 mm Technical data: Credpjxf Dhasfx Abcjh Length 1,150 mm Width 1,005 mm Weight 250 kg Operating voltage 220 V Air 5 kg/cm2 CE marking IMPORTANT: An air pressure supply is required to operate the machine, which is not included in the scope of delivery. Our MH-FJ-2 carton sealer has been specially developed for changing carton formats. formats. Thanks to the pneumatic adjustment of height and width, it is possible to changing carton formats can be processed quickly and easily without manual intervention. be processed quickly and easily. The machine adapts to the different formats at lightning speed. Thanks to two side & two upper conveyor belts, your cartons are conveyed safely through the carton sealer. The lid flaps of the cartons are pressed down manually before being fed into the machine. the machine. This machine is designed for adhesive tapes with 76 mm core diameter and 50 mm width. We recommend the use of machine adhesive tape with more meters per roll (than with hand rolls), so you can work longer without work without having to change the adhesive tape! You can use PP & PVC adhesive tapes as well as environmentally friendly paper adhesive tapes can be used. The adhesive units can be easily removed to change the adhesive rolls. However, this can also be used if you only want to tape the top of cartons ( (keyword: automatic bottom cartons). Of course, this machine also bears the the CE mark. An on-site air pressure connection is required to operate this machine! is necessary! Accessories: For our VOGEL carton sealer program we offer rollers, leading and trailing tables, roller conveyors.

Condition: not inspected (used), machine/vehicle number: 217403, GIRO net packaging machine, type Girplus RS Classic Attractive appearance due to the central message on the pack header. Possibility to make the header with 1 or 2 flaps (see Picture 1) or without flaps (see Picture 2) Possibility to include or not include handle holes. Allows the use of registered Girfilm at both, one or none of the sides. Flexibility to utilize 90 or 119mm header width Handles up to 3kg without needing inner or outer reinforcement bands. 100% recyclable. Net and film are fully made of polyethene. No additional raw material is used. Uses the same consumable materials for all different packaging styles. Thus affording the packer a stock cost-saving and facilitating stock management. Allows the use of self-adhesive labels up to 78 x 36 mm The Girplus-R welding machine offers the packer the possibility of making different bag styles with just one machine. RECOMMENDED CONSUMABLES FROM 1,0 KG TO 3,0 KG PACKAGES Weight 1kg to 2,5 kg - NET GC-80-46-2625 and GC-92-46-R4-2225 and GC-104-46-R4-1923, Film width 119 mm film thicknesses 450gg Film length without flap 87 mm. (65 headers + 22 bottoms) or 143 mm. (121 headers + 22 bottoms) Label: 78 x 36 mm. Weight 3 kg – NET GC-80-46-2925 and GC-92-46-R4-2225 and GC-104-46-R4-2025 Film width 119 mm film thicknesses 450gg Film length without flap 87 mm. (65 headers + 22 bottoms) or 143 mm. (121 headers + 22 bottoms) Label: 78 x 36 mm. Power supply: 380 V, 16 A Codsg H Tc Sopfx Abcsrh Video with our machine in the link below: Price Euro 2.500 Euro + VAT, Ex Works Loaded of FCA: Oradea/Romania Irrtum, Anderungen und Zwischenverkauf vorbehalten / Subject to errors, changes and prior sale / Ne rezervăm dreptul la greșeli, modificări și vânzare We speak English. /Wir sprechen Deutsch./ Beszélünk magyarul. /Nous parlons français/Vorbim romana

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, For sale: Professional rotary table designed for integration with production and packaging lines. The device enables the automatic feeding or collection of bottles, jars, and other containers from a conveyor belt. Specifications and benefits: • Manufactured from stainless steel – hygienic and easy to clean • Robust construction with stable, height-adjustable legs • Tabletop diameter: approx. 80 cm (estimated, can be measured precisely) • Electric drive with adjustable rotation speed • Power supply: 230 V • Suitable for continuous operation • Intuitive controls, START/STOP buttons + emergency stop • Speed adjustment for the table • Usable as: ◦ Feed table (start of the line) ◦ Collection table (end of the line) Condition: Fully functional, ready for operation, lightly used. Applications: Food, cosmetics, chemical, and pharmaceutical industries – anywhere bottling or packaging lines are used. Compatible equipment for this machine can be found here: – Automatic labeller for containers from 25 ml and similar Codpfx Abexgn E Eecsrh – Automatic capping machine for applying and tightening caps – Stainless steel cap feeder – Automatic labeller with belt conveyor – self-adhesive labelling system – Rotary feeding/collection table for production line – stainless steel Collection in person or shipping on a pallet possible.

Condition: used, Year of construction: 2022, functionality: fully functional, machine/vehicle number: 20.08.023.22, feed rate X-axis: 12 m/min, feed rate Y-axis: 9 m/min, feed rate Z-axis: 9 m/min, workpiece weight (max.): 40 kg, workpiece height (max.): 45 mm, plate thickness: 8 mm, temperature: 180 °C, The Felder Format4 Tempora F400 is a premium edgebander designed for professional woodworking, prioritizing speed, efficiency, and high-quality results. Produced by the Felder Group, the Format4 line represents its high-end, industrial-grade machinery. Key features Premium build: The F400 is built with a heavy-duty, solid machine base and uses premium components for consistent, high-performance use. Intuitive control: The machine is equipped with the smartouch control unit, which features a touch screen display for easy selection and monitoring of all functions. With the x-motion PLUS package, the system reduces manual setup by storing user-defined programs and controlling aggregates with high precision. Quick-change glue system: It has a Teflon-coated glue pot with a quick-change system, which allows for fast and tool-free changes between different glues (EVA and PUR) or colors. The pot has a short warm-up time of approximately 10 minutes. Automatic functions: The F400 features a variety of automatic processing units to ensure a perfect finish without the need for manual post-processing. Premilling unit: Uses two counter-rotating diamond-coated spiral cutters to prepare the panel edge for gluing, ensuring a tear-free finish on laminated materials. Corner rounding unit: Finishes workpiece corners and edges up to 3 mm thick without reducing the feed speed. Multi-functional trimming unit: Consists of two high-frequency motors for precision trimming of flush, radius, and chamfered edges. Scraping and buffing units: These optional finishing stations include a radius scraping unit to remove cutter marks and a buffing unit with cotton brushes to clean and polish the edge. Versatile processing: The machine can process coiled edge material from 0.4 to 3 mm in thickness on panel workpieces up to 45 mm thick. Time-saving design: The entire Tempora series is designed to minimize setup time and maximize efficiency, with features like an infrared lamp for better adhesion on cold workpieces and easy access to edgebanding material via the optional storEdge system. Model options The F400 is available in different configurations, such as the 45.03 and 45.03L, which feature different installation lengths and finishing options. The modular design allows customers to add specific processing units to suit their needs. Technical specifications Edge thickness: 0.4–3 mm. Workpiece thickness: 8–45 mm. Feed speed: 9 meters per minute. Crsdpexfk A Djfx Abceh Controls: smartouch with a 10.4" touch screen, available with m-motion or x-motion PLUS packages for varied levels of automation

Condition: excellent (used), Year of construction: 2012, Single-sided edgebanding machine for softforming, rebated door edges or any other softforming application Glue system with slot nozzle available for different glue Eva, PU, Poliolefina panel thickness range 10-60 mm 2 x milling unit for processing workpiece profiles IR lamps for material heating unit for applying anti-adhesive agent Codpfx Abewt Uu Ascjrh glue melter and glue application system with tank made by Meller, temperature and melting time electronically controlled pressure zone: revolver with heated pads or can be replaced with rollers magazine for edge banding tape front and rear cut-off units bottom and top milling units for longitudinal band excess (2x top and 2x bottom) top and bottom polishing units PC control system for quick, easy and precise setting of the main machine functions including aggregates

Condition: new, neu ca. 2 - 4 Wochen ab Auftr 1490 € 1500 x 1000 mm 850 mm 344 kg 28 mm Crodpswirg Isfx Abceh - Fully milled table top 25 mm in S355J2+N with high degree of accuracy (+/- 0.05 mm) and rounded edges and holes - Hard chrome-plated table surface Cr75 The main advantage of our tables compared to conventional systems is with the hard chrome plating Cr75, that this process achieves a much deeper penetration into the base material of up to 0.07 mm and the hardness of the surface reaches up to HV750. This also ensures optimum and lasting anti-spatter adhesion on the surface, which is one of the most efficient on the market. - Exact dimensional and fitting accuracy of the tools with 28 mm perforation (compatible with comparable premium suppliers) - Grid lines 100 x 100 mm - 4 solid table feet with levelling option - Different foot variants available (standard, height-adjustable and with castors) - Load capacity 500 kg/m²

Condition: new, table length 2400 mm table width 1200 mm table height (lateral area) 200 mm weight 981 kg dimensions of the machine ca. 2400 x 1200 mm SIEGMUND Authorized Dealer - All items available! !! SPECIAL OFFER !! SIEGMUND Welding Table Retro 2400x1200x200 incl. accessories Product description - High-quality steel S355J2+N + plasma nitriding - Material thickness approx. 24.5–27 mm - Hole Ø 28 mm - Holes surface 100x100 mm grid - Corners, edges, and holes rounded - Side panel height 200 mm - Side panel holes in diagonal grid - Construction reinforced with ribs - Grid lines enable precise assembly The welding tables are equipped with a scale as standard. Plasma nitrided version: - Protection against rust / scratches / weld spatter adhesion - Corrosion-resistant / higher load capacity Features: - 28 hole pattern / dimensions 2400 x 1200 x 200 mm - Plasma-nitrided version with scale - Includes 4x feet Basic equipment - Includes accessory set (see image 3): * 6x 280604 * 12x 280511 * 8x 280420.N Crodpfjxflftsx Abcjh * 2x 280110.N * 1x 283999

Condition: used, Year of construction: 2008, Machine Overview Automatic inline pressure‑sensitive labelling machine equipped with two self‑adhesive application stations for front and back labels. The system conveys containers in a linear path and provides positive product control via an integrated spacing device, wrap/rolling unit and a top hold‑down counter‑belt. At the machine exit a dedicated smoothing system ensures optimal label adhesion and finish. The unit is suited for medium to large containers in the 1–10 L range and has been refurbished in 2022 to extend lifecycle and reliability. Designed and built by P.E., model PACK LAB, year of manufacture 2008. Key Technical Data Configuration: Linear labeller with 2 self‑adhesive stations Labelling method: Pressure‑sensitive (adhesive) labels Label placement: Front and Back (single or dual application) Optical centering: Not equipped (mechanical guidance and product handling) Container range: 1–10 L containers (typical rigid bottles/cans with stable base) Product handling: Container spacing device, wrap/rolling unit, top hold‑down counter‑belt Outfeed: Label smoothing system at machine exit Protection class: IP54 (machine and electric motors) Year: 2008 | General overhaul: 2022 Productivity: 6000 bph Automation & Control Control architecture: Industrial PLC‑based control with 24 VDC auxiliaries for machine logic Electrical distribution: 400 V ±5%, 50 Hz, 3P + N + PE (neutral and separate protective earth) Instrumentation supply: 24 VAC / 230 VAC Operator interface: HMI with recipe/format management and station status (typical for this series) Sensors and interlocks: Safety‑interlocked guards, product presence and label application monitoring Line Integration Cjdpfx Asxdh Hwobcorh Infeed control: Integrated spacing module stabilizes product pitch before labelling Product stabilization: Top hold‑down counter‑belt and wrap/rolling unit for accurate label placement Outfeed quality: Smoothing/pressure elements at discharge to ensure adhesion and finish Mechanical interface: Linear conveyor path suitable for integration into existing bottling/packaging lines Utilities interface: Standard industrial electrical connections as specified below; no optical centering required Condition & Maintenance Refurbishment: Comprehensive overhaul performed in 2022, including verification of application stations, drive components, belts/rollers, guarding and electrical sections Preventive maintenance: Routine service recommended on label unwind/rewind groups, rollers, belts and sensors according to operating hours and label materials Spare parts: Standard wear components readily serviceable for long‑term support Performance & Versatility Applications: Front and back labelling on a wide variety of rigid containers in the 1–10 L segment (e.

Condition: ready for operation (used), Plant Liquidation – Complete Equipment for Tire Retreading For sale is a comprehensive production line for tire retreading, ideally suited for businesses specializing in tire renewal. ⸻ Machinery & Equipment • Buffing/Rasping Machine: Tread and casing preparation (roughening and buffing) • Repair/Skiving Station: Grinding and patching • Extruder/Filling Unit: Cushion gum processing • Cementing/Adhesive Station • Building/Banding Station: For precured tread application • Envelope/Vacuum Station: Envelope and sealing operations • Autoclave including accessories (tire rings, vacuum pump, pipelines, carts) Additional Workstations: • Casing Spreader / Inspection stand • Pressure & Leak Test Station • Final Inspection (Tread and Sidewall Check) Plant & Auxiliary Equipment: • Compressors (Kaeser & Atlas Copco brands) • Extraction and dust removal system at grinding stations • Tire and material carts, shelving units • Tool and small parts set (valves, gaskets, clamps) • Transport and cooling racks • Various vulcanization and operating accessories Documentation: Photos, parts list, and additional documents available on request ⸻ Condition & Delivery • Used, fully operational • Inspection possible at any time • Accessories available • Dismantling, loading, and shipment easily arranged • Shipping via freight forwarder possible ⸻ Contact Maschinenhandel Nord Gerstenstraße 2 17034 Neubrandenburg 📞 All prices net, plus 19% VAT. Subject to change and errors excepted. Crsdjxk Tuaspfx Abcsh

Condition: new, Year of construction: 2025, Professional EBM 360B table edge banding machine. The machine is designed for edge banding of both straight and curved elements. Ideal edge banding machine for medium and large workshops and carpentry shops. Pneumatic shears for cutting the edge (adhesive tape). Solid, strong construction. This machine feeds, cuts and glues the edge. The tape feeding and cutting sensor automatically takes the cut tapes from the container. Easy to use and conveniently placed control panel. Work comfort and failure-free operation of the machine are ensured. The indisputable advantage is the simple construction and intuitive operation. TECHNICAL PARAMETERS EDGE WIDTH 10-60 (68) mm EDGE THICKNESS 0.3-3 mm MINIMUM WORKING RADIUS 20mm MAX. PERMITTED CUTTING WIDTH 50 mm HEATING POWER 2 kW POWER SOURCE 400V MOTOR 0.18 kW, 0.37 kW, 0.4 kW FEED SPEED 0-14 m/min. AIR PRESSURE 6 BAR DIMENSIONS 1550 x 800 x 1000 Csdpfjwl Eaaox Abcjrh WEIGHT 185 kg

Condition: used, Year of construction: 2016, Industrial automatic edge bander SOLUTION XD MAIN FEATURES "E-TOUCH" CONTROL WITH AUTOMATIC PROGRAMMING: ONE "TOUCH" IS ENOUGH TO OPERATE THE MACHINE. STANDARD PRESSURE DEVICE WITH DRIVE BELT FOR OPTIMAL PANEL GUIDANCE. BANDING OF ROLLED MATERIAL, STRIPED EDGES, AND SOLID WOOD EDGES. GENERAL FEATURES: Single-sided edge bander in left-hand design for gluing rolled materials and strip edges using all conventional hot melt adhesives. The base frame consists of a sturdy, highly rigid steel welded stand, which provides optimal support for the processing units. The upper pressure consists of a thick-walled steel profile and a double trapezoidal drive belt that is automatically positioned to the panel thickness. Height adjustment with display on the top pressure and on the operator interface. Manual workpiece feeding system with a generously dimensioned work line and enlarged support surface facilitates the feeding of large workpieces. Adjustable infeed ruler for two positions with automatic selection for processing with or without pre-milling. Working units are attached to the pressure beam and mechanically connected to ensure automatic adjustment when changing panel thickness. Lower working units are attached to the machine frame or to the longitudinal beam for precise reference in relation to the panel. All high-frequency motors are powered by frequency converters (inverters). The unit is equipped with its own inverter for optimal flexibility and improved production times. The cleaning hood for all units positioned after the gluing unit is equipped with polycarbonate windows to ensure a good overview of the units during processing. The interior lighting of the cleaning hood is lined with sound-absorbing material for lower noise emissions during processing. The spacers on the infeed ruler allow the machine to be fed at the correct distance. The distance is automatically adjusted to the selected feed speed. The exhaust nozzles are arranged on the pivoting control panel, positioned in the infeed area, and are adjustable for ergonomic electrical installation in compliance with current regulations. The electrical component is housed in a metal casing, fixed to the machine frame and equipped with doors for easy access in case of any problems. The standard voltage is 400 V EU 50 Hz (with neutral). The material is fed by a feed chain with 80 mm wide chain plates made of rubberized nylon for optimal guidance and a high chain tension. The chain slides on two guides made of hardened and ground steel, one round and one flat, to ensure linear feed and prevent lateral misalignment. Automatic chain lubrication. The amount of lubricating oil is controlled by the control system according to the panels being processed. The storage roller conveyor is external and positioned along the entire length of the machine; it consists of an opening system that can be extended up to 650 mm (for panels with a maximum width of 1200 mm). E-TOUCHPC control system for quick and easy execution of the main functions which includes:– Editing of programs in Just in Time mode– Possibility of management via parts lists– Possibility of management by Codpfsw Aim Eox Abcjrh

Condition: used, Holz Her Sprint 1329 Black Edition Heavy-duty design - edge thickness 0.4 - 8 mm (15 mm with tool change) 18.5" touchscreen control, Power PC color monitor Motorized, position-controlled bridge height adjustment Pre-milling unit for prepping before the gluing station Fully automatic edge magazine for coil and strip material (MOT) GLU-JET adhesive application station for cartridge, granulate & PU gluing, thin film technology Maximum edge height: 60 mm Glue height adjustment / touch nozzle Pressure unit 1913, motorized-pneumatic NC servo axis End trim unit for coil and strip material up to 15 mm edge thickness With electro-pneumatic tilt adjustment of end trimming saws from 0-10° Multi-function milling unit MOT4 - 4 NC-controlled axes: - Flush trimming 8 mm (15 mm) - Radius trimming - Bevel trimming 0 - 15° Copy-milling unit MOT4, corner copying, post-forming corners with 4 NC axes, for milling upper and lower longitudinal edges and copying the front and rear vertical end edges, working height 60 mm Scraper unit MOT4 Flat scraper unit – finish Crodpfsxbpfiox Abcoh Buffing unit for cleaning and edge polishing with 2 textile discs Spraying device for infeed and outfeed areas, including antistatic agent at the pressure unit Infeed area with electronically controlled separating agent spraying device Pressure section with electronically controlled antistatic spraying unit Outfeed area with electronically controlled cleaning agent spraying device Air cushion table at infeed / L = 1800 mm, W = 600 mm Year of manufacture: 2017 Machine is FULLY REFURBISHED, IN EXCELLENT CONDITION Ex-stock Lieboch / Leasing available