Used Air Air Heat Exchanger for sale (39,468)

Condition: good (used), Reznor UDSA gas hot air generator UDSA gas hot air generator - efficient right up to the peaks The best-known device from REZNOR is the UDSA gas hot air generator, which ensures even air distribution in industrial halls. The easy-to-install air circulation unit is available in 14 output sizes from 7 to 97 kW and consists of a heat exchanger, gas burner and an exhaust fan. The combustion air can be taken either from outside or from the showroom as standard. The UDSA hot air generator from REZNOR ensures even air distribution in the heated hall. Its patented heat exchanger sets new standards in terms of flow behavior and heat transfer and ensures an efficiency of over 92 percent. UDSA: compact, revolutionary and trend-setting. With this generation of appliances, halls can be heated directly in a particularly economical way - i.e. without central heating - with decentrally arranged, modulating gas hot air heaters. REZNOR UDSA Gas hot air heaters. The advantages: Efficiency of more than 92% Device is also suitable for vertical installation Low NOx emissions Innovative combustion concept Quiet operation With CE system certification, version B or C Compact design for easy installation Uniform heat distribution Vertical and horizontal air guide vanes as standard Modulation of the heat output to up to 50% EC technology ErP Ready These appliances are directly heated gas WLEs with fan-assisted atmospheric multi-gas burners. The installation of the gas WLE and the gas and exhaust gas connections may only be carried out by an approved installation company. The gas WLEs are suitable for: - Natural gas or LPG operation - Recirculation operation - Intake temperatures below 5°C with stainless steel heat exchanger * - Heating operation 1-stage or 2-stage* Control via room thermostat and heating control switch - Ventilation° Control via ECOtronic TN - L° with day/night/week program Exhaust gas discharge via roof, version B or C ° Exhaust gas discharge through the outside wall, version C ° Gas WLE type: UDSA064-4E Gas appliance type: BSP-C12-C32-C52-C62 Destination: DE Gas category: I2ELL Gas type: G20 Natural gas Connection pressure: 20 mbar Nozzle pressure: 7.90 mbar Max. Nominal heat load (Hs) QN: 77.69 kW Max. Nominal heat load (Hi) QN: 70.00 kW Caodpfx Adjwb Amisdja Min. nominal heat load (Hs) QN: Min. nominal heat load (Hi) QN: Max. nominal heat output: 64.40 kW Nominal heat output: 64.40 kW Min. nominal heat output: Supply voltage: 230V 1N ,50Hz Air flow rate: 6810 m3/h Protection class: IP20 Pin no. 0461BN0677 You can find more items - new and used - in our store! International shipping costs on request!

Condition: used, Ambient Air Heated Vaporizer used for liquefied oxygen, nitrogen, argon, CO2 different capacity Sale only within the European Union Caodpfx Aeuruxvsddsa

Condition: used, Heating Oven Climate Chamber KÖTTERMANN Type 2306 Serial No. 783018 Year of manufacture: approx. 1980 Internal dimensions (W x H x D): 500 x 530 x 620 mm Connected load: 4 kW Power supply: 380 Volt, 50 Hz, 18.2 Amp. Cajdpfx Adsxf Uxpsdoa - Recirculation fan - Analog temperature controller for heating - Analog temperature controller for cooling - Integrated refrigeration unit - Interior lined with stainless steel No functionality test performed Control system outdated Net weight approx. 250 kg

Year of construction: 2017, condition: new, Electrically heated circulating air furnace (horizontal air flow) Caodpfedhzimjx Addsa max. temperature: 650ᵒC useable dimensions (w x h x d): 1000 x 1000 x 2000 mm heating power: 72 kW circulation fan: 1 x 4 kW

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2011, power: 650 kW (883.75 HP), Woodchips fueled air heater. For grain kilns or industrial halls. Fully automatic with ignition. Have wery low hours- used only 2 seasons. Last 11 years stayd in dry room. Hydraulically driven grates for best burning process. Caodpjwxq D Rjfx Addoa Has hydraulically driven storage, fan and all includings. Automatical ash conveying.

Condition: new, Year of construction: 2024, flue capacity: 175 kW Cjdpfx Ask Utrpsddjaa Conventional yeld capacity: 140 kW flue diameter: 200 mm hot air delivery pipes: 3 x 250 mm flue length: 950 mm oven width: 600 mm oven hight: 860 mm air flow: 6300 m³/h power consumption: 8900 W aproximate surface to heat up: 2200 m³ area to be heated: 500/600 m² heater height without hot air conveying pipes: 2200 mm heater width: 930 mm heater length: 1700 mm weight: 615 kg

Condition: good (used), Kroll M 150 Mobile Hot Air Generator Caedpfx Adexwkw Eedsa Applications: Heating of halls, tents, and construction sites Frost protection in horticultural businesses or warehouses of all kinds Rapid drying of new buildings Supplementary heating during the cold season Fuel: Heating oil EL Nominal heat output: 135 kW Nominal heat input: 150 kW Oil throughput: 12.7 kg/h Air volume flow: 7,300 m³/h Electrical connection: 220 V / 6.1 A Power consumption: 1.38 kW Protection class: IP 44 Dimensions: Length: 2600 mm Width: 900 mm Height: 1300 mm Weight: 270 kg Find more items – new and used – in our shop! International shipping costs on request!

Condition: ready for operation (used), A total of 71 Kroll air heaters are available, 30x LH 130 V10, 1x LH 130 V20, 7x LH 230 V10, 3x LH 330 V10, 1x LH 420 V10, 6x LH 430 V10, 1x LH 430 V20, 11x LH 530 V10 and 11x LH 630 V10. The fans are used and partly have bent fins and scratches. An on-site inspection is possible. Caodjw Uk A Dspfx Addja

Condition: used, Warm air oven, circulating air oven, heat chamber, tempering oven Maximum internal temperature: 240°C Internal dimensions (W x D x H): 485 x 485 x 300 mm Power supply: 220 Volt, 50 Hz - Airtight door lock - Connection for overpressure or vacuum with shut-off valve and pressure gauge from -1 bar to +0.6 bar - Inlet or exhaust air valve for the heating chamber - Interior heated up to 240°C, without temperature control. Caedoxciugopfx Addoa Dimensions (L x W x H): 790 x 670 x 520 mm Weight: approx. 60 kg Good condition

Condition: good (used), Year of construction: 2006, functionality: fully functional, overall weight: 4,000 kg, heating capacity: 198 kW (269.20 HP), large warm air furnace for firewood and residual materials External dimensions approx. 3.5 m x 1.5 m x 3 m Weight 4 t with control system Cedpfxew Ucfdo Addoaa with warm air blower

Condition: new, Year of construction: 2025, Size: 1 Nominal heat output: 45kW -- BImSchV stage 2 and CE conform-- combustion chamber completely fireclayed For rooms from: 1.100 m³ (according to DIN) Fuel: logs, chipboard, chips, chip briquettes fuel consumption: 12 - 15 kg/h Blower air capacity, free blowing: 3.250 m³/hour Blow-out opening: Ø 400 mm Flue pipe connection Ø 150 mm with flue gas blower Weight: 740 kg Csdsdlgqpepfx Addeaa SPS control cabinet: 380 Volt

Condition: new, Year of construction: 2024, Firing chamber output: 49kW Cajdpfjpn Nyzjx Addoa Working power: 45kW New appliance in original packaging: Yes Hot air blower, flue gas blower, electronic control with digital display: included Supply air filter, recirculation air intake filter: large-surface supply air filter without power loss / included Hot air conveying pipes: 2 x 200mm with plug-in freely rotatable 90° bends Smoke outlet diameter: 180mm Firebox length: 660mm Firebox width: 480mm Firebox height: 600mm Air flow : 3500m³/h Supply air filter: Yes, large-surface supply air filter without power losses Power consumption: 550W designed for room volume: 1000m³ Weight: 310 kg

Condition: ready for operation (used), Year of construction: 2000, Recirculating air thermal cabinet / warming oven / drying cabinet / drying oven Alltherm WS 3750 - 1.5 - E - 24l The heated cabinet is equipped with two separately controllable chambers. Maximum temperature per chamber: 250 degrees Celsius Approximate dimensions: Csdpfxjwuqvrs Addoaa Left chamber: Height 167 cm x Width 131 cm x Depth 91 cm Right chamber: Height 167 cm x Width 145 cm x Depth 96 cm Approx. external dimensions of the entire oven: Length 380 cm x Height 250 cm x Depth 128 cm The left chamber is additionally fitted with a viewing window. Location: Siegen ____ Our general terms and conditions apply. The seller assumes no liability for typographical or data transmission errors. The information and images were provided by the owner and released for publication. The appearance of the items on offer corresponds to their age and the photos shown. The technology and wear and tear of the items offered are age-appropriate. Used machines are sold exclusively to commercial customers and without warranty.

Year of construction: 2020, operating hours: 0 h, condition: new, 4 Stationary Warm Air Heaters S / SC oil/gas from Knoll for sale. Purchased in 08/2022 from DEXES Berlin, Original: 12.499 € net/piece; Warranty until 7/2024. 2 pieces unused (11,000 € net/piece); 2 pieces were used only 3x: for this the price is further negotiable. Casdpfjppv Hbjx Addja Location 95506 Kastl; to be sold individually; Self-collection desirable. The warm air heater is already equipped with an oil burner / nozzle and room thermostat.

Condition: used, Tempering oven ARTUR NOLZEN type TL30/30/50 Warm air oven, convection oven, heating cabinet Fabrication no. 14785 Year of construction 1996 Temperature range max. 750°C Internal dimensions 300 x 300 x 480 mm Inner width at center bar 260 mm Connected load 6 kW Mains connection 400 Volt, 50 Hz - Temperature control NOLZEN type TRO t - 96 4 - THEBEN time control, type TR 635 top - Heating time to 750° C in approx. 95 min. Space requirement L x W x H 1300 x 1100 x 1400 mm Cjdpfx Ajq Ubqieddeaa Weight 310 kg good condition

Year of construction: 2023, condition: new, WLO 4 35 KW Hot air stove ,wood stove,Heating Technical parameters of the furnace Nominal heating output: 30.00 kW maximum heat output: 35.00 kW / approx. 300 m2 in set: force axial fan speed: 1350 rpm and capacity: 3500 m3 / h Csdpfxsixupus Addsaa in the set: driver Innovative design of the air jacket that completely surrounds the stove for maximum efficiency indestructible stove made entirely of p265gh and 16m06 certified boiler plates with thicknesses of # 6mm and # 10mm large exhaust deflector reduces fuel consumption by up to 30% Energy efficiency class: A Energy efficiency index: 110 Net weight: 290 kg Gross weight: 310 kg Furnace lining: 28 firebricks removable two large cast iron grids 300 x 200 mm covered with certified heat-resistant paint that protects against corrosion and gives an aesthetic look massive structure large combustion chamber large loading door User Guide Efficiency: 75.00% CO emission at 13% O2: 1.20m Type of fuel: recommended seasoned hardwood with a moisture content of ≤20% * mg/Nm3, briquettes, coal only as an admixture up to 10% Security and Certifications CE mark: YES / located on the nameplate Compliance with standard: EN13240: 2006 BimSchV level 2: Yes Dimensions External Dimensions: Overall Width: 580mm x Overall Depth: 950mm x Overall Height: 1310mm Oven dimensions: Width: 480mm x Depth: 580mm x Height: 560mm Upper door dimensions (sheet 3 and 4 mm): width: 390 mm x height: 230 mm Middle door dimensions (3 & 4mm sheet metal): Width: 390mm x Height: 155mm Bottom door dimensions (3 & 4mm sheet metal): Width: 390mm x Height: 150mm Top Loading Port Dimensions: Width: 310mm x Height: 210mm Center & Bottom Loading Port Dimensions: Width: 310mm x Height: 130mm Cast iron grate dimensions: Width: 210mm x Depth: 300mm Diameter hot air outlet: Ø 150mm Exhaust outlet diameter: Ø 150mm Leg height: 140mm Technical parameters of the fan Type of fan: axial fan Material: steel (propeller + housing) Diameter: Ø 400mm Power supply: 230V / 50Hz Engine: 4P Current consumption: 0.82A Speed: 1350 rpm Air flow: 3500 m3 / h Safety: CE mark + protective net

Condition: new, Year of construction: 2025, Size: 2 Nominal heat output: 58kW -- BImSchV stage 2 and CE conform-- combustion chamber completely fireclayed For rooms from: 1.450 m³ (according to DIN) Fuel: logs, chipboard, chips, chip briquettes fuel consumption: 15 - 25 kg/h Blower air capacity, free blowing: 4.000 m³/hour Cajdpfx Adodlha Dodsa Blow-out opening: Ø 450 mm Flue pipe connection Ø 180 mm Weight: 1.025 kg SPS control cabinet: 380 Volt

Year of construction: 2023, condition: new, WLO 45 KW Hot air stove ,wood stove,Heating Thanks to the powerful combustion chamber, the stove can burn up to Pick up 120 cm long pieces of wood! Furnace parameters Nominal heating output: 49,5 kW approx. 450 m2 including: axial fan with speed: 1380 rpm and output: 5500 m3/h Included in delivery: Controller to regulate the operation of the SCL-1515 fan innovative design of the air jacket that completely surrounds the cooker for maximum efficiency Indestructible range cooker made entirely of certified boiler plate p265gh and 16M06, thickness #6mm large exhaust deflector reduces fuel consumption by up to 30% Energy efficiency class: A Energy efficiency index: 110 Net weight: 320 kg Gross weight: 340 kg Grid: 1000 x 250 mm covered with certified heat-resistant paint that protects against corrosion and gives an aesthetic look solid construction huge combustion chamber 120 x 80cm! large loading door User Guide Yield: 75.00% CO emission at 13% O2: 1.20 m Type of fuel: recommended seasoned hardwood with a moisture content of ≤20%* mg/Nm3, briquettes, coal only as an admixture up to 10% Security and Certifications CE mark: YES / affixed to the rating plate Compliance with standard: EN13240:2006 BimSchV level 2: Yes Dimensions External Dimensions: Overall Width: 800mm x Overall Depth: 1600mm x Overall Height: 1200mm Cooker dimensions: Width: 800mm x Length: 1200mm x Height: 800mm Upper door dimensions (3 & 4mm sheet metal): Width: 520mm x Height: 470mm Bottom door dimensions (3 & 4mm sheet metal): Width: 360mm x Height: 150mm Top Loading Port Dimensions: Width: 460mm x Height: 460mm Cajdpfsixuq Dsx Addja Bottom opening dimensions: Width: 360mm x Height: 130mm Grate Dimensions: Width: 250mm x Depth: 1000mm Diameter hot air outlet: Ø 150mm Exhaust outlet diameter: Ø 200mm Foot height: 140 mm

Condition: new, Year of construction: 2025, Size: 5 Nominal heat output: 145kW -- BImSchV stage 2 and CE conform-- combustion chamber completely fireclayed For rooms of: 3.800 m³ (according to DIN) Fuel: logs, chipboard, chips, chip briquettes fuel consumption: 35 - 40 kg/h Blower air capacity, free blowing: 9.400 m³/hour Blow-out opening: Ø 700 mm Flue pipe connection Ø 220 mm Weight: 1.950 kg Cjdpfx Adjdlhcrodjaa SPS control cabinet: 380 Volt

Condition: new, Year of construction: 2025, Size: 4 Nominal heat output: 116kW -- BImSchV stage 2 and CE conform-- combustion chamber completely fireclayed For rooms of: 2.900 m³ (according to DIN) Fuel: logs, chipboard, chips, chip briquettes Codpfxjdlhcdj Addoaa fuel consumption: 30 - 35 kg/h Blower air capacity, free blowing: 7.500 m³/hour Blow-out opening: Ø 600 mm Flue pipe connection Ø 220 mm Weight: 1.550 kg SPS control cabinet: 380 Volt

Condition: new, Year of construction: 2025, Size: 3 Rated thermal output: 87kW -- BImSchV stage 2 and CE conform-- combustion chamber completely fireclayed Cjdodlhbpjpfx Addoaa For rooms from: 2.200 m³ (according to DIN) Fuel: logs, chipboard, chips, chip briquettes fuel consumption: 25 - 30 kg/h Blower air capacity, free blowing: 6.000 m³/hour Blow-out opening: Ø 500 mm Flue pipe connection Ø 200 mm Weight: 1.250 kg SPS control cabinet: 380 Volt

Condition: new, Year of construction: 2025, Size: 0 Nominal heat output: 34kW -- BImSchV stage 2 and CE conform-- Combustion chamber completely fireclayed Cedpfsdlgvfex Addoaa For rooms from: 850 m³ (according to DIN) Fuel: logs, chipboard, chips, chip briquettes fuel consumption: 10 - 12 kg/h Blower air capacity, free blowing: 2.200 m³/hour Blow-out opening: Ø 350 mm Flue pipe connection Ø 150 mm with flue gas blower Weight: 690 kg SPS control cabinet: 380 Volt

Condition: new, Year of construction: 2025, Size: Prestige SE Cjdpfx Ajdlhcyjddjaa Nominal heat output: 25kW -- BImSchV stage 2 and CE conform-- combustion chamber completely fireclayed For rooms from: 350 - 600 m³ (according to DIN) Fuel: logs, chips, chip briquettes fuel consumption: 8 - 10 kg/h Blower air capacity, free blowing: 1.450 m³/hour Blow-out opening: Ø 300 mm Flue pipe connection Ø 150 mm with flue gas blower Weight: 400 kg SPS control cabinet: 220 Volt

Condition: new, Year of construction: 2025, Size: 6 Nominal heat output: 170kW -- BImSchV stage 2 and CE conform-- Codpjdlhdbofx Addoaa combustion chamber completely fireclayed For rooms of: 4.800 m³ (according to DIN) Fuel: logs, chipboard, chips, chip briquettes fuel consumption: 40 - 50 kg/h Blower air capacity, free blowing: 14.000 m³/hour Outlet opening: Ø 700mm Flue pipe connection Ø 220 mm Weight: 2.150 kg SPS control cabinet: 380 Volt

Condition: new, Year of construction: 2025, heating capacity: 49 kW (66.62 HP), smoke pipe connection diameter: 180 mm, input voltage: 380 V, Size: 2/S Nominal heat output: 49kW Casdpfsdlhafox Addoa -- BImSchV stage 2 and CE conform-- combustion chamber completely fireclayed For rooms from: 1.450 m³ (according to DIN) Fuel: logs, chipboard, chips, chip briquettes fuel consumption: 15 - 25 kg/h Blower air capacity, free blowing: 4.000 m³/hour Blow-out opening: Ø 450 mm Flue pipe connection Ø 180 mm Weight: 1.025 kg SPS control cabinet: 380 Volt