Used Air Humidifier for sale (35,172)

Condition: used, Control unit, control panel, control panel, control unit, keyboard, screen, control, air humidification, dehumidification and evaporative cooling Godpfx Ajd Tq Rxsabekc -Module: M4 (large display) -for: Condair CP2 -Type: M4 -Weight: 0.3 kg

Condition: new, ME-LINE - Air-Cooled Dehumidifiers are used for drying air of up to 100% relative humidity (RH) with temperatures from +45 ºC and above. Gkodpfokw Ukusx Aaboc EU-LINE - Air-Cooled Dehumidifiers are used for drying air of up to 100% relative humidity (RH) with temperatures from -30 ºC to +40 ºC. Rust is the adversary of freshly blasted steel; high air humidity combined with low steel temperatures creates ideal circumstances for moisture condensation onto the recently blasted surface. Condensation rust is a major cause of early coating failure. By lowering relative humidity, the Proton dehumidifiers are designed to give the best climatic conditions for blasting. Climate conditions across the world vary considerably from chilly and humid in Western Europe, warm and humid in the Far East, to hot and humid in the Middle East. Various types of technology can be employed in the dehumidification process; certain dehumidification technologies are more successful than others in dealing with specific climatic conditions. Each Proton dehumidifier is built to the highest quality standards and comes with regional certification. The heart of the humidifier is a very efficient and robust metal silicate rotor. The rotor contains a vast number of air channels, running parallel to the shaft, which ensures a large internal surface for adsorbing water vapour. The rotor is not affected by over saturation. Therefore, the PROTON dehumidifier’s rotor can resist long time storage at high humidity without loosing capacity. The PROTON dehumidifiers have been developed especially for corrossion protection in connection with sandblasting and painting operations to protect materials and to avoid moisture problems, meeting the following conditions: •Avaliable in sizes from 1.000m³/h to 18.000m³/h dry air. •Avaliable in pre-cooled and after-cooled versions for warm climates. •Robust design with steelframe, eyebolts etc. •Vital parts can easily be maintained and exchanged. •Large air inlet grills and filters. •Can be built into containers for protection. •Adjustable dehumidifying capacity and outlet air temperature in 4Grades. •Outdoor and indoor use. •Dry air pressure up to 1200 Pa. Technical. Spec.: Dehumidifiers differs between 1.000m3/h - 18.000m3/h.PROTON Dehumidifiers decrease the Relative Humidity (RH) from 90% to %10-15. Dehumidifiers are capable to remove 100lt water per hour.

Condition: new, Year of construction: 2025, -Smart Safety Clean Air Enhanced Efficiency -Elevate your workplace safety with the TFON Airwet Series — a state-of-the-art wet-type air suction system engineered to eliminate sparks and dust produced during deburring processes. The Airwet Series significantly reduces the risk of fire and explosion, protecting both your workforce and your facility. -Fire & Explosion Prevention: Effectively minimizes hazardous particles and ignition sources right at the source -Enhanced Air Quality: Captures and removes airborne contaminants, creating a cleaner and healthier work environment Seamless Integration: Gkodpfx Asvg U Dxsabsc Compact, space-saving design allows for easy installation into existing machinery and workflows Increased Safety & Regulatory Compliance: Supports compliance with occupational health and safety standards, boosting overall operational safety

Condition: excellent (used), Year of construction: 1996, Compair Cyclon 6000N screw compressor 75kw power: 75 Kw air transport : 12.9 /min :774 m3/h pressure: 8 bars voltage: 400v 50Hz 3 phase Construction of year: 1996 hours:51000h weight: 1800 kg Size: length: 2100mm width: 1700mm Height: 1510mm Gsdpfx Aoh Unhnjabekc If you need more information. We are here to help! Please contact us using the contact form or give us a call Your ad has been automatically translated. Translation errors are possible.

Condition: used, Year of construction: 2023, functionality: limited functionality, We offer for sale a high-performance OMEGA AIR Nitrogen Generator, model N-GEN 100 NGC 2.0, complete with a 480-liter pressure vessel, both in excellent condition. This system is ideal for industrial applications requiring high-purity nitrogen. Nitrogen Generator Specifications (OMEGA AIR N-GEN 100 NGC 2.0): • Inlet Pressure: 8 bar • Outlet Pressure: 6.7 bar • Nitrogen Flow Rate: 49 m³/h • Purity: 99.99% • Oxygen Content: ≤100 ppm • Inlet Temperature Range: +5°C to +35°C • Power Supply: 230 VAC, 50–60 Hz • Year of Manufacture: 2023 • Made in EU • Serial Number: 23AD000230 Pressure Vessel Specifications (OMEGA AIR N-GEN 100): • Volume: 480 liters • Maximum Working Pressure: 16.0 bar Gkedpfx Aajwu Dm Rsboc • Test Pressure: 22.9 bar • Working Temperature Range: -10°C to +50°C • Fluid Group: 2 • Year of Manufacture: 2022 • Date of Hydrostatic Test: 11/2022 • Serial Number: 22PP001267 • PRICE: €19,000

Year of construction: 2014, condition: good (used), power: 260 kW (353.50 HP), color: yellow, machine/vehicle number: 214034, Painting-drying booth with semi-vertical air flow "ITALO-1-SV", brand Lackro, manufacturer Eco-Air Technology S.R.L. Italia, year of manufacture: 2014 Cabin interior dimensions: length 14.06 m X width 5.04 m X height 4 m, maximum air flow: 40-45000 mc/h, thermal power: 260 Kw, fuel: diesel, installed electric power: 26 Kw three-phase, tank fuel included, the cabin has a special lighting system, 30 superior filter cells for purification with carbon, dimensions: 500x500x50 mm, side service door, two central hinged doors, trolley for parts, burner chimney on diesel, the cabin has the user and maintenance manual Attention customers: this cabin will be delivered disassembled and loaded for transport from our company headquarters in Oradea. Industrial drying painting cabin "ITALO-I-SV" MOD. ECO – L=14,060 mm x w=5,040 mm x H=4,000 mm with semi-vertical air flow Gjdpfx Aaop S Tlhsbekc Suction group Suction and filtration unit ECO-SM-5 Maximum air flow at 250 Pa m3/h 40,000-45,000 Maximum thermal power kW 260 VATRA 232 Fuel type DIESEL Installed three-phase electric power: kW (2x7.5) +(2x5.5) Filter cells 500 mm x 500 mm x 500 mm 30 pieces Bag filter Ǿ 280 x 1000 mm pieces 10 Ceiling grid 975 x 1855 mm 28 pieces Generator pre filters 1,000 mm x 800 mm x 50 mm pieces 2 Andreae suction wall filter 0.9 m x 5 m pieces 3 The maximum size of the piece in the cabin L=12 m x w=3 m x H= 3.2 m For any details, do not hesitate to contact me by phone. Price 79.900 Euro + VAT, Ex Works Oradea/Romania Irrtum, Anderungen und Zwischenverkauf vorbehalten / Subject to errors, changes and prior sale / Ne rezervăm dreptul la greșeli, modificări și vânzare We speak English. /Wir sprechen Deutsch./ Beszélünk magyarul. /Nous parlons français/Vorbim romana

Condition: used, functionality: fully functional, Air Liquide Arpege 55 Liquid Nitrogen Container With Storage Racks. Main characteristics include: - Aluminum vessel for both the long holding time and large capacity line: - Long holding time - Large capacity - Light weight and resistant - High quality polyurethane paint - On wheels Gjdpfsupttgex Aabskc Good working condition. Please check out our other listings as well.

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, overall weight: 2,500 kg, cooling capacity: 50 kW (67.98 HP), volume flow: 10 m³/h, The Air Liquide cooling and heating system is a process thermostat designed for optimal and precise temperature control for any application demanding rapid, precise, and powerful thermal control between -80°C and +70°C. The temperature control unit works by thermally conditioning the heat transfer fluid Syltherm XLT within a closed-loop circuit. For cooling, liquid nitrogen (LIN) is used as the cryogenic medium to lower the fluid's temperature. For heating, an integrated electric resistance heater raises the fluid temperature to a maximum of +70°C. The conditioned fluid is then circulated from the unit to the external application to enable precise process temperature control. The system is fully automated, ensuring precise and reliable process control with minimal manual intervention. Original paper documentation is included. • Year of manufacture: 2016 • Manufacturer: ALTEC GmbH • Condition: Fully functional • Cooling Capacity: 50 kW • Operating temperature: -80°C - 70°C • Automation: Fully automated operation • Documentation: Original paper documentation included • Heat transfer fluid: Syltherm XLT • Heat transfer fluid flow rate: 10 m³/h • Material: Stainless steel 304L (1.4541) Dimensions: • Width: 1800 mm • Height: 2000 mm • Length: 3500 mm • Weight (empty): 2500 kg • Insulation: PU foam and aluminium sheet cladding Potential Applications Include: • Pharmaceuticals: API synthesis, reactor cooling, vaccine storage, biotech applications. • Food Processing: Flash-freezing, quality preservation. • Aerospace/Automotive: Component testing, material treatment. • Electronics: Manufacturing and testing. Gksdpfx Aaewt A Eieboc • Materials Science: Cryogenic milling and processing. • Research & Development: Any application requiring precise thermal cycling. We ship worldwide. If you are interested or have any questions, please get in touch! Can be inspected in Liestal, Switzerland.

Condition: good (used), Year of construction: 2002, For sale are 3 units of electrostatic industrial filters from the brand Air-Fresh-Service, model F-V10. Voltage/Frequency: 230V/50Hz Current: 1.0 A Gsdpfexbgm Rjx Aabjkc Power: 0.22 kW Transport and loading can be organized across Europe at an additional cost if required. Prices are exclusive of VAT. Viewing is possible by appointment. Please contact us; our team will be pleased to assist you further. Machinery Purchase / Sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES, MACHINE TOOLS, AND MORE. Are you looking for a high-quality yet affordable machine for your production? Or do you want to sell yours? For further information or to get in touch, please use the contact form.

Year of construction: 2017, condition: excellent (used), Bluhm weber legi-air 4050 labeling machine More pieces in stock! year built: 2016-19 Print resolution 8 dots/mm (203 dpi) 12 dots/mm (300 dpi) 24 dots/mm (600 dpi) Print speed Up to 400 mm per second Tamp sizes (mm) Tamp-Blow standard of 12.5 x 7 to 160 x 300 mm, label lengths must be limited in accordance with label quality, longer or smaller labels are possible using special tamps Label gap Minimum 3 mm Gedpfofp A I Eox Aabskc Label roll 300 mm diameter, up to 450 running meters, core 76 mm (3"), outside winding (optional inside winding) Data interfaces RS232, RS422, RS485, Ethernet Optional: Profibus Dimensions (L x H x W) 770 x 560 x 580 mm, Applies to system with 250 mm stroke Display controller Multi-language operator guidance 5.7" VGA touch display Service interval indicator Polling, editing and saving of label data USB connection for memory medium or keyboard Compressed air connection 6 bar, the compressed air must be clean, dry and oil-free

Condition: excellent (used), functionality: fully functional, mileage: 10,35,000 km, power: 426.59 kW (580.00 HP), first registration: 03/2019, fuel type: diesel, color: blue, axle configuration: 4x2, fuel: diesel, brakes: intarder, gearing type: automatic, emission class: euro6, suspension: air/air, Equipment: ABS, air conditioning, airbag, navigation system, onboard computer, parking heater, spoiler, MAN TGX 18.580 D 38 Full Air Suspension - First registration: 03/2019 - Mileage: 1,035,000 km - Retarder: Intarder - ADR AT - Stationary air conditioning - Navigation system - LED headlights - Dual fuel tanks - Two bunk beds - Tyres: 50% remaining FINANCING OR CUSTOMIZED LEASING OPTIONS AVAILABLE ON SITE. FROM 24 UP TO A MAXIMUM OF 96 INSTALLMENTS, EVEN WITH ZERO DOWN PAYMENT. OTHER LOCATIONS OF OUR GROUP: DOMENICO TRUCK SRL, NAPLES LOCATION DOMENICO ESPOSITO S.P.A., EBOLI (SA) LOCATION – OFFICIAL DEALER MERCEDES-BENZ, FUSO, FOTON TRUCK, PIAGGIO COMMERCIAL & MAXUS CONTACTS: 0823 1686306 335 6713062 – 377 7064530 BRANCH OPENING HOURS: MONDAY–FRIDAY 8:30–19:00 – SATURDAY 8:30–14:00 WE OFFER A WIDE RANGE OF USED COMMERCIAL/INDUSTRIAL MULTIBRAND VEHICLES: Gsdpfxjwgy H Ro Aabskc Fiat – Hyundai – Daf – Mercedes-Benz – Renault – Peugeot – Iveco – Mitsubishi – Scania – S-Way – S500 – V8 – 650 – 580 – 730 – S500 S – Stralis – Man – Nissan V8 – Intarder – 770s – Limited Edition – 660 S Semi-trailer – Refrigerated Tank Semi-trailer – Lamberet – Schmitz – Isuzu – Fixed Body – Crane – Tipper – 4 axles – 4 Rear Axles – Tway – T-Way – 540 – 460 HP – Xway – X-Way – Three-way tipper – V8 – Scania – Frost Edition Curtainsider – Box – Tail-lift – Refrigerated body – Insulated with fridge – Van Domenico Truck srl declines all responsibility for any discrepancies in technical specifications, optional equipment, and features, which in some cases may differ from those indicated in the description. We recommend checking the specifications of the individual vehicle.

Condition: good (used), Filter system, clean air filter, fine filter, filter, compact filter, particulate filter, filter cassette -Manufacturer: Filt Air, air filter type GT4-13AE-YBCO -Front frame dimensions: 1210 x 600 mm, see photo nameplate -Connection: Ø 230/250 mm -Number: 20x air filters available Gkodpfx Aastpyq Uobjc -Price: per piece -Dimensions: 1210/190/H600 mm -Weight: 16 kg/piece

Condition: new, Year of construction: 2025, Viber-Air Power: 7.5 kW / 7.5 HP Motor speed: 3000 rpm Tank capacity: 500 liters Voltage and frequency: 400V / 50Hz Water resistance: IP23 Noise level: 65 dB Operating pressure: 10 bar Air flow: 800 l/min. Drive type: direct drive Outlet diameter: G 3/4 Dehumidifier: TR-10HP Cooling: Air Screw manufacturer: BAOSI Inverter: Included Display: HTK070 Dimensions (length/width/height): 1900/800/1660 mm Weight: 390 kg Gjdjxdbvrepfx Aabjkc Suction capacity: 950 l/min Discharge capacity: 800 l/min

Year of construction: 1990, condition: used, machine/vehicle number: 20260046, Max. Operating pressure: 10 bar Gksdpjdttxlsfx Aabsc effective delivery rate at approx. 7.5 bar: 450 l / min Required drive: 1450 rpm, 4 kW Drive motor: 380/660 V, 1440 rpm, 5.5 Air chamber volume: 250 l Required space: 1500 x 600 x 1320 mm Weight approx .: 250 kg

Condition: like new (used), Year of construction: 2022, functionality: fully functional, Equipment: documentation/manual, refrigerant dryer, type plate available, Container includes the following contents: - 10ft storage container, new / Color: Anthracite grey - SSC-Strong 37 Vario • Speed-controlled screw compressor • Free air delivery at 8 bar: 6.3 m³/min • Dimensions (LxWxH): 1432 x 1000 x 1480 mm • Weight: 705 kg - 2 compressed air tanks, 500 l each o With AD2000 certification o Horizontal design - 2 Ecomat 31 condensate drains - 2 sets of fittings Gksdpfsxc T Evox Aabsc - SCC refrigerant dryer DRA480 o ISO 8573-1 Class 4 o Refrigerant: R407C o Capacity: 480 m³ - Pre-filter FIL934-P - Fine filter FIL934-M The compressor has seen very little use and therefore has low operating hours. Upon request, we can read the operating hours and run the compressor for demonstration.

Condition: used, Year of construction: 2008, functionality: fully functional, machine/vehicle number: 07034210 / 00368004644, type of input current: three-phase, working range: 6,100 mm, sheet thickness (max.): 200 mm, sheet thickness steel (max.): 120 mm, sheet thickness aluminum (max.): 25 mm, overall weight: 6,000 kg, input voltage: 125 V, cutting speed: 6,000 mm/min, total width: 4,500 mm, total height: 4,000 mm, total length: 9,000 mm, cutting height (max.): 300 mm, track width: 3,500 mm, table height: 800 mm, repeat accuracy: 1 mm, workpiece weight (max.): 6,000 kg, table length: 6,100 mm, working width: 2,600 mm, compressed air connection: 9 bar, positioning speed: 600 m/min, hose package length: 12,000 mm, table width: 2,600 mm, cutting current: 260 A, positioning accuracy: 1 mm, temperature: 30 °C, working length: 6,100 mm, space requirement length: 9,000 mm, input current: 125 A, travel distance X-axis: 8,000 mm, travel distance Y-axis: 2,700 mm, travel distance Z-axis: 300 mm, space requirement height: 4,000 mm, space requirement width: 4,000 mm, type of cooling: water, height adjustment type: mechanical, electrical fuse: 125 A, ambient temperature (max.): 40 °C, Equipment: documentation/manual, CNC cutting machine Brand: Air Liquide / Oerlikon Gkjdpfx Aaoxfqapebec Model: Oxytome B25 E Cutting head 1 - plasma source: Hypertherm HPR 260 Cutting head 2 - torch: propane/oxygen with mixing chamber Cutting range: 6100 x 2550 mm Plasma Steel: 3–35 mm thick Stainless steel: 3–25 mm thick Aluminium: 3–20 mm thick Oxy-fuel torch for steel: 25–200 mm Cutting table with zoned extraction Extraction unit not included Year of manufacture: 2008 Second owner since 2017 Machine will be delivered ready to cut Annual maintenance performed by the manufacturer Complete documentation available Currently operated with Radan/Hexagon cutting software Simple parts can be drawn directly on the machine Machine is being replaced due to age/wear and advancements in cutting technologies. Purchase of the separate plasma source (Hypertherm cutting unit) is negotiable. Dismantling not included Extraction system not included Software not included Collection only Machine can be inspected on site by arrangement Price/offers by negotiation Inspection on site is possible.

Year of construction: 2018, condition: excellent (used), - volume flow: up to 1200 m³/h - elektric: 3-Ph. 400 V - 50/60 Hz Godpog Ipn Tsfx Aabjkc - power: 1,5 kW (IE3) - current: 2,3 A - protection class: IP54 - noise: 70 dB

Condition: like new (used), Year of construction: 2020, operating hours: 200 h, functionality: fully functional, machine/vehicle number: 202003010, total height: 1,900 mm, total width: 900 mm, total length: 2,000 mm, overall weight: 300 kg, type of input current: DC, negative pressure: 4,600 Pa, volume flow: 2,000 m³/h, control cabinet height: 1,200 mm, intake manifold diameter: 160 mm, input voltage: 240 V, noise level: 62 dB, We have had this machine for 3 years, but it has hardly been used. It also comes with a pipe system to reach the source. It looks like new. Gkjdpfxoxddkre Aaboc

Condition: new, Year of construction: 2025, Viber-Air INV11-500 Screw Compressor with Dryer and Inverter Power: 11 kW / 7.5 HP Motor Speed: 3000 rpm Tank: 500 liters Voltage and frequency: 400V / 50Hz Water resistance: IP23 Noise level: 65 dB Operating pressure: 10 bar Air flow: 1500 l/min Drive type: direct drive Outlet diameter: G 1 Dehumidifier: TR-20HP Gsdpfsxdbubsx Aabjkc Cooling: oil Screw manufacturer: BAOSI Inverter: Included Display: HTK070 Dimensions (length / width / height): 1900 / 750 / 1030 mm Weight: 500 kg Suction capacity: 1800 l/min Discharge capacity: 1500 l/min

Condition: like new (used), Year of construction: 2020, operating hours: 1,208 h, functionality: unexamined, machine/vehicle number: VP40S12, overall weight: 215 kg, power: 4.05 kW (5.51 HP), fuel type: electric, Compressed air compressor 5.5 HP 380-400V, piston model, little used, detailed information on the photo showing the nameplate. Gkodpoxbhi Tsfx Aabjc

Condition: excellent (used), Year of construction: 2014, 1 unit used plasma cutting system Manufacturer: Air Liquide Model: Plasmatome 20B Godpow Hydiefx Aabskc Year: 2014 Table size: 3,100 x 1,500 mm Cuts up to 20 mm mild steel Cutting source: Hypertherm PMX65

Year of construction: 1988, condition: used, Compressor unit type 178 A CD E Delivery volume 4760 l min 9 bar operating pressure Gedpegw Dqpofx Aabskc KW 30

Condition: like new (used), Wrapping Films in Various Types, Like New Condition 🧰 Product Features • Manufacturer: Sealed Air, Foli Pack, Mima Lite • Model: various types • Condition: like new, see photos • Colour: transparent • Thickness: 15 - 23 μm • Length: 1,000 - 4,200 m Available Films: 2 pcs. Foli Pack 250 mm x 1,000 m 2 pcs. Sealed Air 455 mm x 2,150 m 2 pcs. Sealed Air 605 mm x 2,150 m 12 pcs. Foli Pack 400 mm x 1,000 m 19 μm 18 pcs. Foli Pack 500 mm x 1,250 m 15 μm 23 pcs. Stretch film 500 mm x approx. 3,000 m 23 pcs. Mima Films 440 mm x 4,200 m 30 pcs. Stretch film 500 mm x approx. 4,200 m 23 μm 💰 Price: €1,200 net excluding VAT • Quantity discount: on request Gkodpfx Aow N Ny Djabec • Shipping costs: Europe-wide on request • Delivery time: immediately available • Inspection and collection: possible at any time by appointment Constant stock of over 5,000 linear metres of pallet racking from various manufacturers (Subject to change and error in technical data, specifications, and prices as well as prior sale! See our Terms and Conditions; all prices excl. VAT ex stock.)

Condition: good (used), Year of construction: 2015, We offer you: Foam cushion packaging machine Manufacturer: Sealed Air Model: Instapak 901 Gedpfx Aaow Ra Ihobekc Year of manufacture: 2015 Accessories, depicted tools, and clamping devices are only included in the scope of delivery if specified in the additional information. Subject to changes and errors in technical data and details, as well as prior sale!

Condition: as good as new (ex-display), Year of construction: 2021, Cooling capacity: 26 kW Year of production: 2021 Country: manufactured in Italy Airflow: 5,000 m³/h Gkjdpfxsqrpihe Aaboc Dimensions: 920 x 1120 x 720 mm Condition: very good, new Quantity of product: 4 pcs. Working temperatures of the AHU: -40/+70 °C Clivet AQX10, 26 kW (Year of manufacture – 2021), quantity 1 pcs. – 920 x 1120 x 720 mm, Airflow(2.5 m/s) – 5 000 m³/h