Abrasive media Steel shot - S110 to S330
Blasting cycle time - 1-10 minutes
Diameter of the rotary table - 1000 mm
Manufacturer of the blasting turbine STEM - Slovenia
Number of turbines and power -1 x 5,5 kW
Diameter of the turbine wheel - 330 mm
Velocity of abrasive - 78 m/s
Abrasive trown per wheel - 110 Kg/min
Opening / closing of the door - manual
Inside lining Manganese steel – X120Mn12
Bucket elevator - 0,75 kW
Table motor power - 0,37 kW, with invertor
Max. load on the table - 600 kg.
...
Roller conveyor blast machine
- operating hours 10.070 h, year of construction 1980
- throughput opening: width x height approx. 700x500
- 35 kW connected load (machine only)
- Separate control cabinet in very good condition
- 4 blast wheels á 7,5 kW
- abrasive throughput per blast wheel approx. 100kg/minute
Btitdmll7y
- Bucket elevator with good used buckets and with new belt
- electrics new wired
- blast media hoses new
- Blast wheels resp. throwing blades in working condition
- throwing bl...
Description of the image positions:
1. workpiece screw , 2. Y-switch , 3. turbine , 4. rotating device
5. screw conveyor, 6. air classifier, 7. bucket elevator, 8. control cabinet
9. safety filter, 10. cartridge filter.
1. PROCESS SEQUENCE
In this overhead conveyor blast machine, the workpieces, which are attached to
hooks are manually transported to the blast cabinet on an overhead conveyor system.
The blasting process runs according to the preselected pragram and blasting time.
and the blastin...
Technical details on demand.
Bwwljtyksx
Hunziker
Suexhs
Blast wheel through blast machine
Automatic blasting machine
Working range approx.
250 w * 280 l.
2*blast wheel 7.5 kw
used for cleaning brass castings / mouldings
inclusiv, separator, dust extraction PS60 feeder belts, conveyor belt
various conveyor profiles as spare part
if necessary with new conveyor segments (belt)
dust ash separator PS 60 year 1992
Engine: Deutz
Hydraulic Rock Drill COP 1238 ME:
Torque: 700 Nm
Impact Rate: 2,400-3,600 blows/min
Chain Feed System CFH 812:
Feed Length: 7,300 mm
Hav9sqm7
Hub Length: 4,400 mm
Feed Force: max. 20 kN
Compressor XAH 125:
Pressure: max. 10.5 bar
Delivery quantity: 125 l/s
Dimensions: 3510 x 2820 x 5520 mm
Bg7lxqj0eh
OWPS - 3.5 x 2.0 Planetary Shotblasting Machine with Traversable Turntable
Basic filter - dry, bagged, polyester, regenerated by fan
collection of dust into a big bag
Guaranteed degree of dust behind the final filter below 2mg/m3
Note: Cleaned air is exhausted directly to the hall
Dimensions
- max. height above level "0" - 9 m
- max. depth below the level "0" - 2,2 m
- max. length - 13 m
- max. width - 11 m
Weight of the entire equipment - approx. 55 t
Bearing capacity of travelling turntable - ...
Manufacturer: Bird & Schemmann
Year of construction: 1964
Weight: ca: 4000 KG Masch. No.: 14992/4576
General information / technical data:
gebrauchteSchleuderrad rotary table Strahlanlagefuer steel granulate in one age according to good condition
Dwzmqjjt
Table diameter: 1250 mm maximum workpiece height: 300 mm
Number of centrifugal wheels: 2pcs
Spin wheel diameter: 350 mm
Power / spin cycle: each 4KW
The machine space requirement:(b x t x h) approx 4000 mm x 3600 mm x 3500 mm
Power supply / po...
Technical details on demand.
Bwwlkql2o0
Loop belt through blast machine
Bpoemxtnay
We only deliver this machine within our sales area; Netherlands, Belgium, Luxembourg & Germany (zip code 40-59)
Rösler – Specialist in surface technology
Bhyybaf
Rösler is the only surface finishing supplier in the world that offers the two most essential finishing technologies, mass finishing and shot blasting, as well as industrial washing systems and in-house production and development.
In addition to a wide range of machines available from stock, Rösler also supplies used and demo machine...
OWPK-4 shot-blasting machine with travelling table
Commissioning October 2008.
Technical data
1. dimensions
- max. height above "0" level - 7.1 m
- max. depth below grade "0" - 2.3 m
- max. outside length - 17 m
- max. external width - 6,2 m 2.
Weight of the entire equipment - approx. 40 t
Load capacity of the rotary travelling table - 10 t. 4.
Max. dimensions of the cleaned casts
- diameter - 2,9 m
- height - 1,5 m
Total installed power approx. 150 kW 6.
Hdnbml7tw
6. compressed air
- pressure -...
Turbine power: 4x 11kW.
Bmga083pz7
4300 EURO (last price). Machine in good working condition. Everything is working.
Hbax2h
Mobile pressure-fed air blasting machine with blast gun (closed-circuit blasting machine)
Application
Rust removal, descaling, paint stripping, weld and mould cleaning, roughening and etching of rollers
Assemblies
Blast gun for simultaneous blasting and recovery of blast media and dust
Pressure vessel / Storage hopper for reclaimed blast media
Reclaimer (air cyclone) for separation of re-usable blast me...
Areas of use:
High performance abrasive blasting of metal constructions and buildings, bridges, reservoirs, piping, concrete surfaces.
Cleaning up to grade SA-3,0.
Performance up to 15 m2/h.
Designed for working with any dry abrasives, max. grain size 3,5 mm.
Uvmu0
STANDARD DELIVERY:
25- / 50-liter capacity tank, screen, cap, sand valve, high-performance moisture separator (CAF-0), inspection door, quick hose couplings.
Remote control device with a pneumatically-operated RC main valve, dea...
sand blasting machine , 1.000x500 4 turbins
Xl0ieczi
Sandblaster by SANT-TECH purchased in 2016 - used occasionally we are selling due to change in technology
Bv2fijd92l
Very good condition visible in the pictures
If interested, please email
Wet sandblasting unit, Sandblasting unit - Pressure blasting unit SAPIMasch. No. 43207 Year of construction 1989Canister size 140 litre perm. operating overpressure 10 barAir requirement approx. 3000 litres/min.hose length approx. 8 meter- Valve opens and closes via pneumatic operation at the blasting nozzle- Sandblasting protective hood with compressed air connection- Complete system installed on metal pallet with forklift pockets- Accessories such as connection pieces for blasting nozzles at t...
We offer a suspended two-chamber blaster type - SPH 2-5,5 / 12. Equipment manufactured by 2004. manufacturer DISA-CZ-. Technical data: height - 4076 mm width - 2654 mm length - 2123 mm total. weight - 4600 kg load capacity of the rotating hinge - 300 kg max. workpiece diameter - 550 mm max. workpiece height - 1200 mm number of blasting chambers - 2 number of throwing wheels - 2 input of throwing unit - 7.5 kW Automatic filter unit with output - 3400 m3 / hours Total power consumption of the mach...
dimensions: innen 1160 x 580 x 580 mm
Air consumption 400 - 800 l/min.
air pressure 3,4 - 8,0 bar
workpiece weight max. 120 kg
total power requirement 1,2 kW
weight 115 kg
range L-W-H 1225 x 935 x 1640 mm
Furnishing:
- Very large front flap that opens upwards
- Suitable for various blasting materials
* e.g. quartz, glass ball, plastic ball, etc.
- With gas pressure springs for quick and easy loading and unloading
- Integrated suction system with exchangeable air filter
- Jet gun without a fin...
dia. of drum 820 mm
Bkplse2jqk
width 1000 mm
charge load 450 kg
total power requirement 17,5 kW
weight of the machine ca. t
dimensions of the machine ca. m
Construction jet plant
8xTurbines
11KW
Roller distance 500mm
Itiecml
Fine filter
Circulating air
Max throughput speed 2,5 m per min.
Function Inspection until Aug 2021.
Sandblasting machine of the manufacturer Heinrich Schlick K.G.
used , ready for use
Bwi7hgoqtu
Minimise lost (evaporating) of dry ice with TRANSFORMER. This powerful dry ice blasting machine using dry ice nuggets and rise for cleaning!
The innovative grinder (!) and supersonic nozzles (!) allow for ultra-aggressive and gentle cleaning. Properties: up to 12 atm; up 10 000 L/min, up to 120 kg/hr.
Cnyf0rqo8
CE-components inside
CONSTRUCTION ROLLER BLAST MACHINE BRAND : WHEELABRATOR GROUP RB750
Blasting processing of constructions, profiles and sheets. Centrifugal wheels are arranged at an angle so that complex structures are blasted on all sides.
Brand: Wheelabrator Group
Type: RB 750
Year: 2008
Inlet Width: 750mm
Inlet High: 300mm
Wheels: 4 x 4,0kW
Wheel Type: TS 14.3
Inlet roll table: 3.000mm with 1500mm funnel and abrasive return
Outlet roll table: ...
through-put width 820 mm
working heigth 810 mm
Air consumption 680 l/min.
air pressure 8,6 bar
weight 160 kg
148 Liter
0 Arm Loch 180 mm
air clutch 3/8" Zoll
Furnishing:
- Working space: 1110 x 820 x 810 mm LxWxH
- very stable construction
- Jet head (grain size 0.149 - 0.250 mm can be used)
- Container for blasting material
- dust extraction
Nloaj
- foot switch
- Lighting in the work area
- Operating instructions in German
- Transport dimensions / packed: 1350 x 1000 x 1100 mm
Filling volume: 0.13 m ^ 3
Blast wheel: 1 piece á 7.5kW
Blasting room diameter: 700 mm
Zvyh8uzl
Blasting room width: 910 mm
max.batch weight: 250 kg / 130 kg for rubber band
for further details see attached technical data sheet
Flow blasting machine, on steel balls, opening 1,600 × 500, with roller strips, filter next to
Pc9u9
External dimensions: W x H x L: ca. 1500 x 2100 x 900 mm
Oxmtrr3x
SPECIFICATIONS - Plates useful blasting width mm. 3200
- Max. plate thickness mm. 50
- Min. plate thickness mm. 5
- Profiles max. height mm. 500
- Inner rollers pitch mm. 600/800
- Turbine type SM 340 n. 6
- Turbine power Kw. 15
- Total shot throw capacity kg/1' 1200
- Shot throw speed mt/sec. 70
- Average blast speed on plates mt/1' 1,5
- Adjustable blast speed mt/1' 0,4 - 2
- Dust collector capacity mc/h. 23.000
PAINTING SYSTEM SPECIFICATION
Gkugvlchm
TECHNICAL AND DIMENSIONAL FEATURES
Dimen...
Machine Reference nr. : 7
SHOT BLASTING MACHINE TOSCA TS CV 3 x 20
Manufacturer: TOSCA – ITALY
Year of manufacture: 1998
Model: TS CV 3 x 20
Number of throwing wheel: 3
Throwing wheel power: 15 kW each.
Range: Ø Up to 15 mm.
Speed: Max. 60 mt./min.
Tension: 380 V. - 50 Hz.
Bu2z80yeu2
COMPOSITION OF THE LINE
Blasting tunnel
Hopper
Throwing wheels (3)
Bucket elevator
Abrasive selector
Filter
Connecting pipes to the filter
Electric motors
Electric cabinet
Pneumatic equipment
Documentation
through-put width 580 mm
working heigth 615 mm
discs 570 x 260 mm
Air consumption 400 l/min.
air pressure 2,7 - 5,5 bar
weight 125 kg
Box Width 1200 mm
Furnishing:
- Working space: 1220 x 615 x 580 mm LxWxH
- Jet head (grain size 0.149 - 0.250 mm can be used)
- Container for blasting material
- dust extraction
- foot switch
- Lighting in the work area
- Operating instructions in German
Yr0vuk
Spinners: 1x 380mm P=30 kw
Drum disc diameter:1200mm
Drum disc diameter:1064mm
Volume max.: 0,5m³
Filling weight max.: 1500kg
Unit weight max.: 150kg
Unit dimension max.: 500mm
Connected value: 40kw
Required connected value dedusting: 7000Bm³/h
Material supply: Hydraulic feeder
Hpjstxtas
Ansprechpartner Marco Merico
load capacity: max. 227 kg
Wheelpower: 7,5kW
Max. Volume: 170 Liter
N8wyr
Beltmaterial: Rubber Band
We offer a table blaster. Parameters: - table diameter 990 mm, throwing wheel Carlo Banfi, - diameter of throwing wheel - 300 mm - input of throwing unit - 5 kW - bucket conveyor - 0,75 kW - table rotation (gearbox) - 0,75 kW - equipment height - 2750 mm Very quiet operation of the device. The total power input of the machine without the filter unit is - 6.5 kW
Bnyrtlz
Machine is used to clean the inner surface of the copper tube in a continuous process of blasting. Machine can process at the same time 6 tubes ( diam. 10,12,15,18,22,28mm) or 2 tubes (diam. 32,45,54mm) up to a lenght 5 or 6m
Eecj7dipe
Continuous blasting machine manufacturer RÖSLER
Beipw9t0sz
TiP: ST 1400 as
Year 2014
dimensions: innen 1160 x 870 x 850 mm
Air consumption 400 - 800 l/min.
air pressure 3,4 - 8,0 bar
workpiece weight max. 150 kg
total power requirement 1,2 kW
weight 160 kg
range L-W-H 1320 x 1200 x 1760 mm
Bqgudmt88o
Furnishing:
- Very large front flap that opens upwards
- Suitable for various blasting materials
* e.g. quartz, glass ball, plastic ball, etc.
- Integrated suction system with exchangeable air filter
- Jet gun without a finger trigger
* The air flow is controlled by a foot pedal
...
The 115 PB pressure blasting system with its efficient pressure blasting system is especially suitable for work where a high removal rate is indispensable. The optionally available turntables allow even heavy workpieces to be processed without any problems. sandmaster offers the pressure blasting machine type 115 PB as an exclusive representative of sandmaster in the Baden-Württemberg area as IS Zubehör GmbH. "sandmaster" pressure blasting system - pressure blasting system with 25 l boiler - hig...
Turbines: 4 pieces, 11 kW each
Max. abrasive consumption: app.182 kg/min per turbine
Filter system: Option for AGTOS cartridge filter
Control system: Siemens SPS
max. passageway, width: 200 mm
max. passageway, height: 300 mm
Nys02
MONORAIL HANGER SHOT BLASTING MACHINE WITH WETFILTER
Designation: Monorail Hanger Shot Blaster
Brand : Schlick
Type: DHB 12/14
Workpieces ø: 1.200mm
Workpieces High max.: 1.400mm
Charge max. kg: 500kg
Shot Wheel: 3 Pieces with 7,5kw with Drivers
Consisting of:
- Monorail Hanger Shot Blaster Typ: DHB 12/14
- O-Hanger System with Workpieceshangers
- Main Panel
- Wet Filter
Befzpjl0bn
Wir bieten auch Ersatzteile für Rösler, Schlick, Wheelabrator, Gietart usw. Strahlanlag...
Inner dimensions: 7450x4900x3980mm, with Dust Extraction TORIT TDS and documentation.
Suzfxk
We offer a completely refurbished blasting box with a filter unit, blasting equipment, floor vacuum cleaner, recuperation equipment for cleaning abrasives and monitoring equipment for the inner working space of the box. Blasting chamber with internal dimensions: length - 3400 mm, width - 2400 mm, height - 3500 mm. Total power consumption 13 kW. The device is covered by a 24-month warranty. complete equipment without compressor. Any abrasive materials can be used for blasting. The device can be t...
TECHNICAL SPECIFICATIONS:
Dimensions (LxWxH): 700 x 530 x 1100 mm
Weight: 88 kg
Container capacity: 23 kg
Dry ice consumption: 30 - 80 kg / h
Air connection: ¾ "
Air volume: 2-12 m3 / min
Air pressure: 1-14 bar
Power supply: 110/230 V - 50/60 Hz
Connected load: 750W
Description:
User friendly control panel / control
• easy handling
• One-hose system
• Low weight
2m3xfnkqf
• Easy handling
• highest air / dry ice speed
• Compact design with low weight
• easy to transport
• easy to move
• Large, i...
Due to the consistent use of high-quality materials such as stainless steel and carbide, the injector blasting unit 75 IN MEDICA sets new standards in the field of manual processing of medical parts. Equipped with self-cleaning filter cartridges and an effective blasting agent preparation, the injector blasting unit type 75 IN MEDICA is extremely reliable in operation and achieves a high degree of reproducibility. A number of options are available to cover a wide range of customer requirements. ...
Product description:
Casting, forging, pressing, heat treatment, finished product, semi-finished product, steel fabrication etc. It is preferred for surface cleaning, pre-coating preparation or revision works. Its distinct advantages are that it enables versatile sandblasting, and that large and small parts with irregular geometry can be sandblasted. With the help of the digital clock we use in our machines, the sandblasting time can be adjusted according to the part type and desired sandblasti...
Injector blasting Cabinet / beam machine ISK802
Workspace B = 1200mm depth = 880 mm height = 745 mm.
Energy consumption approx. 0.6 KWh
Vbytf83z
The handy Jet cabin. With gas pressure relieved offers two Gelnk folding door damper in the open position a perfect free front and allowing the loading of heavier workpieces by means of forklift or crane.
For questions about technical specifications, etc. contact us in writing or by telephone.
Basis of the machines is the production at the site Großenlü...
