Compressed air demolition hammer
Cu3igz80
-Operating pressure: 7 bar
-Number: 2x demolition hammer available
-Price: per piece
-Dimensions: 640/365/H125 mm
-Weight: 22 kg
pressure capacity max. 500 t
impact capacity / mkp
Gcyx0w7
table length / mm
Technical parameters:
Machine type: Banning KP1
Year of production: 1955
Max. forming energy: 160 kJ
Stroke: 1250 mm
Max. number of strokes: 80 / min.
Passage between lines (width): 700 mm
Min. clamped die height: 360 mm
Ram weight: 3000 kg
The machine is fully functional, connected and operational.
Bl9tm22ims
impact capacity 65 kp
table length 250 mm
Bkygre9
table width 250 mm
160 mm
stroke speed 210 /min
throat 300 mm
total power requirement KW
weight of the machine ca. 3 t
dimensions of the machine ca. 1,4x1,4x2 m
Nominal weight of the falling parts: 750 kg
Max. number of blows per minute: 105
Kinetic energy: 1900 kg
Distance from an axis of the slider up to bed: 750 mm
Cylinder diameter: 600 mm
Diameter of the plunger: 630 mm
Max. headstock travel: 835 mm
Dimensions:
-Left-to-right: 3940 mm
-Front-to-back: 1430 mm
Y2ee3fua
Height above floor level: 3260 mm
Weight:
-With an anvil-block: 25600 kg
-Without an anvil-block: 16600 kg
Compressed air demolition hammer
Bbx9tkz
-Operating pressure: 7 bar
-Number: 4x demolition hammer available
-Price: per piece
-Dimensions: 630/480/H120 mm
-Weight: 24 kg
Weight of the falling parts: 196 kg
Number of strokes per min: 210
Effective kinetic energy of falling part by stroke: 330 kg/m
Distance from ram axis-to-frame: 340 mm
Anvil height above the floor: 750 mm
Bivvaf9sij
Stroke run: 460 mm
Striking area: 75x190 mm
Motor: 15kW
Overall dimensions mm:
-Length: 930 mm
-Width: 1860 mm
-Height: 2160 mm
Weight of the hammer: 3450 kg
Weight of anvil 1650 kg
Price 3800 EUR
Compressed air demolition hammer
-Operating pressure: 7 bar
-Number: 1x demolition hammer available
-Price: per piece
Piq3golh
-Dimensions: 500/220/H70 mm
-Weight: 6 kg
Max mass of drop parts 150kg. Price 3400 EUR
Hmwkrojh
Extraction, oil mist separator AFS (Air Filter Systems) Type AFS 1100
Fog and smoke separator, filter system, oil mist extraction
Serial No: 3341 Year of construction 2001
Air flow rate - volume flow approx. 1100 m3/h
Suction connection Ø 200 mm
Exhaust air grille 440 x 140 mm
Engine power 0,5 kW
Mains connection 380 Volt, 50 Hz.
- 2 pcs. pre-filters made of wire mesh for cleaning
- 2 pcs. prefilter with exchangeable fleece
- 1 piece perforated plastic prefilter
- Main filter of wire mesh L x D ...
Paddle mixer , Make Dynamic Air (USA), Type Bella B320E-XN, No. 1096976, Year of construction 2009, Material Stainless steel 1.4404 (316L), Double shaft , Useful capacity 320 ltr, Trough sizes 1325x1105x850mm, With cover (2x), Inlet dia. 260mm (1x) dia. 115mm (1x) dia. 100mm (1x), Outlet 1200x160mm (2x), Glands air purged , Motor 15 kW 380-420/660-725 volt (2x), Speed mixing shaft 112 rpm, Floor space 2,6x1,4 M, Total height 1,7 M, Weight 1000 Kg, CE , This Fluidized Zone Mixer features an origi...
Hot Foil Stamping machine AIR HYDRAULICS AH
Year 2006 - Serial-No. AH 930002
Str2nw
-We would be very pleased with your visit - more machines on Stock-
-Available Immediately-
-Can be inspect-
-On Stock Emskirchen / Nürnberg - Can b
Catalog No. : 5292
Type: PLASMATOME 25
Producer: SAF Air Liquide
Made in: 2004
Characteristic:
Length of the working table: 12000 mm
Width of the working table: 2000 mm
Table height: 700 mm
Maximum thickness of the cut sheet metal: 150 mm
Ft23xu2
Cutting speed: 15 m/min
Equipment:
NETRAJET HP 120 tilting head
CNC DIGISAF 3.5
Centrifugal fan, paint mist extraction fan, fan, extraction fan, blower
-Motor power: 1.1 kW
-Speed: 2760 rpm
-Max. Volume flow: approx. 1,900 m³/h
-Max. Pressure: - kp/m²
-Connection input: Ø 300 mm
-Connection output: Ø 300 mm
-Impeller: Ø 310 mm
-Connection: 400 volts
-Number: 3x available
-Price: per piece
-Dimensions: 900/630/H660 mm
-Weight: 64 kg
Q9wnkla
Coolant mist extraction
Bpptnoucsr
feed pressure 13 bar
liter capacity 3,6 m³/min
Number of working hours h
voltage 400 V
total power requirement 30 kW
weight of the machine ca. 0,95 t
dimensions of the machine ca. 1,1 x 1,0 x 1,7 m
- Serial-No.: F1005979 / S0009582
Boxvmx3mmg
Condition Used
Bnvu8o0y
Listing name AIR LIQUIDE Arpege 40 Liquid Nitrogen Storage Vessel
2008 40L liquid nitrogen storage vesselSELLERS NOTICE: If you have a competing quote for the item, we will always try to beat it. Items are ‘sold as seen’.ID: FFTF077
Jogger Schuster RW
Year ca. 1992 - Serial-No. -
Size 900 x 1150mm
mobile, tiltable
height adjustable
Bi0gy2dmbn
-We would be very pleased with your visit - more machines on Stock-
-Available Immediately-
-Can be inspect-
Respiratory protection filter
-Clean AIR: basic 2000
-P SL R Art. No.: 80 00 10
Be2whotnmy
-Price: per piece
-Number: 17 pieces
-Dimensions: Ø 131/54 mm
-Weight: 0.1 kg/piece
Panel saw with undercutter table 2m
Ytispo
Oil mist extraction electrostatic series F-V, volume flow 2000m3/h,
Was installed on a trade fair machine and not yet in operation.
Gegapfkj
Technical characteristics
Integrated dryerSound proofTank / Vat
NEW state
1.84 hours of functionning
Hxbp87f8o
300 L air tank
PF6 filter and automatic purging Debit / Rate of air flow: 33 m3/h Power and Motors
Motor: 4 CV Overall dimensions
ALNAT™ CRYO system
incl. Eurotherm NanoDac control
Year of manufacture 2014
Made in Germany
Incl. shelf system
Plant is currently still in operation and can be visited.
Cryogenic treatment at -180
For steels with carbon contents above 0.5 percent by mass, cooling to room temperature is not sufficient for complete transformation into the hardness structure (martensite) - residual austenite remains. Cryogenic treatment with liquid nitrogen enables controlled, complete microstructural transformatio...
Designed for welding with 15 PAW (Plasma) method without additional material
Cc7d0kkq
Used to weld individual sheet metal sheets together (to the strip) and to weld the seal welds of the tanks (to the twisted sheet)
Thickness of welded material 1-10 mm single-layer or multi-layer weld
Maximum weld length 3250 mm
Can be used for diameters from 380 to 1450 mm Plasma / TIG seamer benche
Pressure reducers, pressure regulators, manometers
-for oxygen
-Inlet pressure: max. 200 bar
-Outlet pressure: 0 - 12 bar adjustable
-Number: 1x piece available
-Price: per piece
-Weight: 1.4 kg
S0yhevger
Machine type: Automatic longitudinal and circumferential welding machine CBMATIC LM 42 x 48 with welding system NERMATIC N450 DC PLASMA - TIG and roller self-adjusting positioner
Manufacturer: Air Liquide
Model: CB-MATIC LM 42x48
Year of production: 2018
Control system: Siemens Simatic HMI
Material thickness: 6 to 16 mm butt
Material: stainless steel
Specifications:
Vertical reach of the arm: 4200 mm
Horizontal reach of the arm: 4300 mm
Vertical arm speed (variable): 110 cm / min
Horizontal arm...
Air Liquide gas semi-trailer for liquid natural gas, LNG, methan,
Gas tank volume: 45 m3,
Ogeg9
Stainless steel
Tara 12600 kg
Test pressure 9,5 bar
Cryogenic isolation for LIN, LOX, LAR, LNG
We would also be pleased to prepare an offer for you or provide you with further information. To discuss the possibilities, please contact us by phone or e-mail. We speak German, English and Russian.
RAPID 1528 Grinding machine
Manufacturer: RAPID
Type: 1528
Year: 2000.
Condition: used machine, excellent condition
Installed power: 2,2 kW
Volatge inquiry: 380V / 50 Hz/ 3 phase
Shaft lenght: 280 mm
Working area: 280 x 220 mm mm
Sieve: yes 5 mm
Control panel: yes
Brplgz2rs8
Emergency stop button: yes
Plug in: yes
Blades number: 4 x 4 pcs
Overal dimensions: 560 x 1000 x 1750 mm
Weight: aprx. 300 kg
Located in Hungary; can be seen and test in ou...
Crusher Hammer RH25 Year of construction: 2017 Hydraulic rotator Demolition Unused Machine weight approx 25 to 40 tons CE certified Weight: 2511kg Crusher Hammer RH25 Year of construction: 2017 Hydraulic rotator Demolition Unused Machine weight approx 25 to 40 tons CE certified Weight: 2511kg
Bqywxsre3a
Sticker remover / caramel disc remover from Zionair, double sided tape remover on air pressure (LUCH-00147). revolutions = 4000 rpm diameter strip wheel = 87 mm air connection = 1/4 inch hose connection = 3/8 inch average air consumption = 4,5SCFM / 128 L/min working pressure = 6,3 Bar / 90 PsiPneumatic caramel disc machine , Caramel machine , Striping remover , Sticker remover. This tool is used in garages for stripping paint and removing stickers etc. The housing is made of lightweight alumi...
Digestorium exhaust system for pharmacies, chemistry and medicine
-Interior dimensions: 540/850 / H900 mm
Ikgjfpn
-Stainless steel version
-Glass door front
-With Camfit filter cartridge
-Connection: 0.085 kW
-Type suction: EB 225
-with extractor hood
-Dimensions: 675/900/H1200 mm
-Weight: 100 kg
Machine type: Automatic longitudinal welding machine SEAM-MATIC INTER 32 with welding system NERMATIC N450 DC PLASMA - TIG
Coz77gi
Manufacturer: Air Liquide
Model: SEAM-MATIC INTER 32
Year of production: 2018
Control system: Siemens Simatic HMI
Material thickness: max 10 mm butt
Material: stainless steel
Specifications:
Weld length: max. 2,860 mm
Internal welding: 1,450 mm
Thickness without stitching: 1 to 5 mm
Stitching thickness: 1 to 10 mm
Jaw opening: 10 to 30 mm
Theoretical height of the g...
MITSUBISHI - Air Conditioner
PUHZ-ZRP71VHA
Suffjs
230 V
50 Hz
used / used
Please note the photos
Please look at the pictures. Important!!!
Net weight / net weight: 120 kg
X748
Sandblast gun for large sandblasting cabinets
Dmk3y2d
Concrete crusher Hammer RH16 Demolition Year of construction 2017 360 Rotation head Machine weight 15 to 24 tons CE certified Concrete crusher Hammer RH16 Demolition Year of construction 2017 360 rotation Machine weight 15 to 24 tons CE certified
Djqvh78ug
Paint sprayer brand Zionair, W200 , 2mm, under cup, professional (LUCH-00163). Cup capacity = 1000ml Air pressure = 2 bar Air consumption = 270 l/min Liquid output = 180 - 330 ml/min Air connection = 1/4" Hose connection = 3/8" Flowsystem = Suction Top quality with stainless steel needle and nozzle, Nozzle sets available in sizes: 1.8 mm (LUCH-00272)Below is a category overview of all air tools sold by Trailer and Tools. By clicking on the name of the category you will see below which compressor...
Air cushion or air cushion bags are characterized as particularly space-saving and clean packaging. Fill-Air air bag packaging systems feature a variety of fast, easy-to-use systems that deliver air-filled cushions on demand. They offer excellent protection and efficient cavity filling while at the same time reducing material and shipping costs. -Weight: 32 kg
Qk8vbm3qg
AIR LIQUIDE PLASMA - ALPHATOME 30 - 2005- system HP digital process- plasma Nertajet HP 125- cutting width 3000 mm (for one cut piece)- cutting thickness max 50 mm- table length 12000 mm- under power- including exhaust
Bi7bg8nv33
This universal abrasive is extremely suitable for the removal of paint layers, rust, roughening and matting. Corundum aluminum can be used with pressure- and injection blasting systems.
Cdddyjke
Hammer BRH501 Year of construction 2017 Own weight 1000kg Total length about 230cm Machine weight 16 to 25 tons CE certified Price 5950,- p/st Hammer BRH501 Year of construction 2017 Own weight 1000kg Total length about 230cm Machine weight 16 to 25 tons CE certified Price 5950,- each
Jwji8i
Tire pump, Tire gun, Tire filler 12 bar, Zionair (LUCH-01900).Tire pump / tire gun / tire gauge / tire blower / tire filler / tire pressure gaugeThis solid tire pump is ideal for easily filling and deflating your tires. Pressure gauge diam. = 63mm Max. working pressure = 12bar (170psi) Pressure readable from 0.1bar Length of filling hose = 320mm Ergonomic designBelow is a category overview of all air tools Trailer and Tools sells. By clicking on the name of the category, you will see below which...
Air cushion or air cushion bags are characterized as particularly space-saving and clean packaging. Fill-Air air bag packaging systems feature a variety of fast, easy-to-use systems that deliver air-filled cushions on demand. They offer excellent protection and efficient cavity filling while at the same time reducing material and shipping costs.
Qk8ux2w3f
-Weight: 42 kg
Omega Air refrigeration dryer. OMD 410 / AC, 410 m³ / h.
Bjtl38ujw9
Capacity: 10T
Max Ram Stroke: 1400mm
Maximum hitting energy: 25,000 Kgfm
Max strokes per min: 100
Sjoxfmm
Compressed air pressure: 7-9 bar
Distance between edges: 1000mm
Length x width x height: 4400.0 × 2700.0 × 10470.0
Weight: 300,000Kg
In working state. General condition is very good. No defections. There is a transportation advantage due to its location near the port.
Ps: If requested, there is also a 1000T PRESS which could be sold together with the forging hammer.
