Nominal weight of the falling parts: 750 kg
Max. number of blows per minute: 105
Kinetic energy: 1900 kg
Distance from an axis of the slider up to bed: 750 mm
Cylinder diameter: 600 mm
Diameter of the plunger: 630 mm
Max. headstock travel: 835 mm
Dimensions:
-Left-to-right: 3940 mm
-Front-to-back: 1430 mm
Height above floor level: 3260 mm
Weight:
-With an anvil-block: 25600 kg
-Without an anvil-block: 16600 kg
Y2ee3fua
Max mass of drop parts 150kg. Price 3400 EUR
Hmwkrojh
Capacity: 10T
Max Ram Stroke: 1400mm
Maximum hitting energy: 25,000 Kgfm
Max strokes per min: 100
Compressed air pressure: 7-9 bar
Distance between edges: 1000mm
Length x width x height: 4400.0 × 2700.0 × 10470.0
Weight: 300,000Kg
Sjoxfmm
In working state. General condition is very good. No defections. There is a transportation advantage due to its location near the port.
Ps: If requested, there is also a 1000T PRESS which could be sold together with the forging hammer.
Capacity: 25T
Max RAM stroke: 1150 mm
Max Energy: 9 bar 48,000 daN.m
Min Energy: 6 bar 38,000 daN.m
Hitting Energy: 480 Kj
Max debit necessary for air: 321,5 Nm3/min
Length x width x height: 4920.0 × 2800.0 × 13700.0
Yssle8
Weight: 458000 kg
In working state. In very good condition. No defection. Can be quickly delivered to the buyer. There is a transportation advantage due to its location near the port.
Ps: If requested, there is also a 1600T PRESS which could be sold together with the forg...
Good working condition
Capacity: 5T
Max RAM stroke: 1400 mm
Owjx7
Hitting Energy: 125-142 Kj
Yssle8
Length x width x height: 6250.0mm × 1450.0mm × 9130.0mm (6190mm from the ground)
Weight: 115,265 kg
In working state. In very good condition. No defection. Can be quickly delivered to the buyer. There is a transportation advantage due to its location near the port.
pressure capacity max. 500 t
Gcyx0w7
impact capacity / mkp
table length / mm
Compressed air demolition hammer
-Operating pressure: 7 bar
-Number: 1x demolition hammer available
-Price: per piece
-Dimensions: 500/220/H70 mm
Piq3golh
-Weight: 6 kg
impact capacity 65 kp
Bkygre9
table length 250 mm
table width 250 mm
160 mm
stroke speed 210 /min
throat 300 mm
total power requirement KW
weight of the machine ca. 3 t
dimensions of the machine ca. 1,4x1,4x2 m
Technical parameters:
Machine type: Banning KP1
Year of production: 1955
Max. forming energy: 160 kJ
Stroke: 1250 mm
Max. number of strokes: 80 / min.
Passage between lines (width): 700 mm
Min. clamped die height: 360 mm
Ram weight: 3000 kg
Bl9tm22ims
The machine is fully functional, connected and operational.
- produces parts which weigh between 50-400kg
Bl2p3ppt9j
- Counterblow hammer (2 rams with 40T each) pneumo-hydraulic action
- Oil pressure: 120 bar
- Compressed air pressure: 6-8 bar
- Maximum impact energy: 350Kj
- Place of manufacture: Germany
- Total Weight: 281,000 kg
This machine would be the most powerful forging hammer in New Zealand, ex the Royal NZ Navy Devonport Naval Dockyards.
Bsixj029p3
It has a 1000kg hammer 'ram' that is powered downwards by compressed air from the motor-driven rear cylinder.
This hammer was acquired by our forging company from the Devonport Naval Dockyards in 1998. It had been in occasional use by the Navy until then.
It has not been installed at our forge and has spent the intervening 23 years sitting as per the pics.
It has been...
pressure 0,2 t
stroke 525 mm
total power requirement / kW
weight of the machine ca. 8 t
Dsj2uw9
required space / m
Compressed air demolition hammer
-Operating pressure: 7 bar
-Number: 2x demolition hammer available
-Price: per piece
-Dimensions: 640/365/H125 mm
Cu3igz80
-Weight: 22 kg
ram hammer weight 125 kg
stroke . mm
Control konv.
throat 350 mm
Bruuwhq9du
total power requirement kW
weight of the machine ca. t
dimensions of the machine ca. m
Manufactured by Kalinin plant (Russia)
Year of manufacture app. 1985
Nominal weight of falling parts, kg 1000
Energy of impact, Kj 30
The greatest number of impacts in a minute, 103
Ram axis-to-frame distance, mm 800
Working zone daylight, mm 750
Die impression size, mm 360 x 140
Lower die impression-to-floor distance, mm 750
Optimum workpiece cross-sectional dimensions, mm:
- square 160
- rounded 180
Main electric motor power, kW 75
Gyrsdp22y
Machine dimensions, mm 4400 x 1780 x 3570
Weight of ...
Second hand hydraulic forging hammer LASCO KH 315. The forging hammer LASCO KH 315 is still installed and very well operating. It has been completely overhauled a few years back. The following overhauling works have been done: -New SPS operation, electric switch cabinet, food pedal (twin pedal) with switch for slow lowering and slow lifting -New piston -Hydraulic drive completely dismantled and cleaned -Main valve with new housing and new piston -Hydraulic cylinder honed -New valves, new pumps, ...
Forging Hammer CM3150 (3,15 to) made by Progresul Braila - Romania. The hammer was made after Huta Zygmunt drawings. The hammer is similar to MPM10000B HUTA
YOM: 1980.
Technical specifications:
Maximum energy of impact at maximum stroke: 10000 kgm
Ram weight: 3150 kg
Mode of operation: pneumatic
Stroke: 900 mm
Number of blows per minute: 90
Working pressure: 5 - 7 bar
Bhmyzfco8u
Overall dimension 3300x2000x5900mm (LxWxH)
Hammer Weight: 96000kg
The hammer is delivered with additional new ram (a...
Maximum energy of impact at maximum stroke: 10000 kgm
Ram weight: 3150 kg
Mode of operation: pneumatic
Stroke: 900 mm
Number of blows per minute: 90
Working pressure: 5 - 7 bar
Bgrsr2wtwu
Weight: 105.000kg
Compressed air demolition hammer
-Operating pressure: 7 bar
-Number: 4x demolition hammer available
-Price: per piece
Bbx9tkz
-Dimensions: 630/480/H120 mm
-Weight: 24 kg
ram hammer weight 480 kg
stroke 710 mm
throat 550 mm
impact capacity 1250 mkp
no. of strokes 210 Hub/min
ram hammer stroke 710 mm
work height max. 720 mm
total power requirement . kW
weight of the machine ca. 7,4 t
dimensions of the machine ca. m
pressure 400 kg
Steam drive
Tjhudjzd
Used forging hammer HUTA ZYGMUNT MPM 1000 A. The hammer is still installed on site but no longer under power. The mechanical condition is very good.
Year of manufacture: approx. 1974
Working force in kgm: 3500
Ram weight in kg: 1250
Opening between the stands in mm: 650
2ikoymbb
Approx. weight of anvil in kg: 22500
Approx. total weight of hammer in kg: 35000
Height above floor in mm: 3800
Stroke per minute: 110
Stroke in mm: 900
Ram size (lxb) in mm: 630 x 500
Overall size (lxbxh) in mm: 2500 x ...
Forging hammer EUMUCO 6.3TON
For more information please contact us.
Lhlut8f0
The Hammer is simmilar with Huta Zygmunt MPM 3150.
-maximum energy of impact at maximum stroke - 3600kgm;
-ram weight - 1250kg;
-mode of operation – pneumatic;
-table size (front to back) - 700mm;
-stroke - 800mm;
Cfnul9ios
-number of blows per minute – 110;
-working pressure - 5 - 7bar;
-max. weight of upper die - 400kg;
-die height - 220mm;
-ram (front to back) - 500mm;
-air consumption - 15m3 / min;
-anvil weight - 24 t;
-height of machine above floor - 3750mm;
-total machine's height - 4380...
pressure 3150 MKP
stroke 500 mm
strokes - infinitely variable 80 Hub/min
table surface area 800x800 mm
total power requirement . kW
weight of the machine ca. t
dimensions of the machine ca. m
Bkpneha0vs
The matching scraping press can also be purchased with the hammer
ram weight 1000 kg
stroke 1000 mm
throat 800 mm
impact capacity 4200 mkp
total power requirement . kW
weight of the machine ca. t
dimensions of the machine ca. m
Bkocdlisvg
Steam drive
rated capacity 2000 KG
ram hammer stroke 1080 mm
throat 1100 mm
impact capacity 10000 kgm
no. of strokes 125 Hub/min
ram hammer weight 2300 kg
Bkocgbdfjp
work height max. 620 mm
total power requirement . kW
weight of the machine ca. t
dimensions of the machine ca. m
Steam drive
ram hammer weight 250 kg
stroke . mm
throat 425 mm
no. of strokes 150 Hub/min
impact capacity 475 kpm
total power requirement 20 kW
N9ssh
weight of the machine ca. 7,35 t
dimensions of the machine ca. m
Respiratory protection filter
Be2whotnmy
-Clean AIR: basic 2000
-P SL R Art. No.: 80 00 10
-Price: per piece
-Number: 17 pieces
-Dimensions: Ø 131/54 mm
-Weight: 0.1 kg/piece
bag length 22-340/ 22-127 mm
bag width 300 - 470 mm
work impulse 0-99,9 sek.
Temperature range ca. 60 - 70 °C
dimensions ca. 1300x800x1200 +Tisch mm
Bskp0rl9rr
Extraction, oil mist separator AFS (Air Filter Systems) Type AFS 1100
Fog and smoke separator, filter system, oil mist extraction
Serial No: 3341 Year of construction 2001
Air flow rate - volume flow approx. 1100 m3/h
Suction connection Ø 200 mm
Exhaust air grille 440 x 140 mm
St90gs
Engine power 0,5 kW
Mains connection 380 Volt, 50 Hz.
- 2 pcs. pre-filters made of wire mesh for cleaning
- 2 pcs. prefilter with exchangeable fleece
- 1 piece perforated plastic prefilter
- Main filter of wire mesh...
Jogger Schuster RW
Bi0gy2dmbn
Year ca. 1992 - Serial-No. -
Size 900 x 1150mm
mobile, tiltable
height adjustable
-We would be very pleased with your visit - more machines on Stock-
-Available Immediately-
-Can be inspect-
Designed for welding with 15 PAW (Plasma) method without additional material
Used to weld individual sheet metal sheets together (to the strip) and to weld the seal welds of the tanks (to the twisted sheet)
Thickness of welded material 1-10 mm single-layer or multi-layer weld
Cc7d0kkq
Maximum weld length 3250 mm
Can be used for diameters from 380 to 1450 mm Plasma / TIG seamer benche
Capacity 1.0 mm
Bkqnceqwex
Pressure reducers, pressure regulators, manometers
-for oxygen
-Inlet pressure: max. 200 bar
-Outlet pressure: 0 - 12 bar adjustable
-Number: 1x piece available
S0yhevger
-Price: per piece
-Weight: 1.4 kg
Paddle mixer , Make Dynamic Air (USA), Type Bella B320E-XN, No. 1096976, Year of construction 2009, Material Stainless steel 1.4404 (316L), Double shaft , Useful capacity 320 ltr, Trough sizes 1325x1105x850mm, With cover (2x), Inlet dia. 260mm (1x) dia. 115mm (1x) dia. 100mm (1x), Outlet 1200x160mm (2x), Glands air purged , Motor 15 kW 380-420/660-725 volt (2x), Speed mixing shaft 112 rpm, Floor space 2,6x1,4 M, Total height 1,7 M, Weight 1000 Kg, CE , This Fluidized Zone Mixer features an origi...
Coolant mist extraction
Bpptnoucsr
Hot Foil Stamping machine AIR HYDRAULICS AH
Str2nw
Year 2006 - Serial-No. AH 930002
-We would be very pleased with your visit - more machines on Stock-
-Available Immediately-
-Can be inspect-
-On Stock Emskirchen / Nürnberg - Can b
Catalog No. : 5292
Type: PLASMATOME 25
Producer: SAF Air Liquide
Made in: 2004
Characteristic:
Ft23xu2
Length of the working table: 12000 mm
Width of the working table: 2000 mm
Table height: 700 mm
Maximum thickness of the cut sheet metal: 150 mm
Cutting speed: 15 m/min
Equipment:
NETRAJET HP 120 tilting head
CNC DIGISAF 3.5
feed pressure 13 bar
liter capacity 3,6 m³/min
Number of working hours h
Boxvmx3mmg
voltage 400 V
total power requirement 30 kW
weight of the machine ca. 0,95 t
dimensions of the machine ca. 1,1 x 1,0 x 1,7 m
- Serial-No.: F1005979 / S0009582
Digestorium exhaust system for pharmacies, chemistry and medicine
-Interior dimensions: 540/850 / H900 mm
-Stainless steel version
-Glass door front
-With Camfit filter cartridge
-Connection: 0.085 kW
-Type suction: EB 225
-with extractor hood
Ikgjfpn
-Dimensions: 675/900/H1200 mm
-Weight: 100 kg
Condition Used
Bnvu8o0y
Listing name AIR LIQUIDE Arpege 40 Liquid Nitrogen Storage Vessel
2008 40L liquid nitrogen storage vesselSELLERS NOTICE: If you have a competing quote for the item, we will always try to beat it. Items are ‘sold as seen’.ID: FFTF077
AIR LIQUIDE PLASMA - ALPHATOME 30 - 2005- system HP digital process- plasma Nertajet HP 125- cutting width 3000 mm (for one cut piece)- cutting thickness max 50 mm- table length 12000 mm- under power- including exhaust
Bi7bg8nv33
Panel saw with undercutter table 2m
Ytispo
Technical characteristics
Integrated dryerSound proofTank / Vat
NEW state
1.84 hours of functionning
Hxbp87f8o
300 L air tank
PF6 filter and automatic purging Debit / Rate of air flow: 33 m3/h Power and Motors
Motor: 4 CV Overall dimensions
Air cushion or air cushion bags are characterized as particularly space-saving and clean packaging. Fill-Air air bag packaging systems feature a variety of fast, easy-to-use systems that deliver air-filled cushions on demand. They offer excellent protection and efficient cavity filling while at the same time reducing material and shipping costs. -Weight: 32 kg
Qk8vbm3qg
