Used Combined Machine for sale (92,721)

Condition: new, Year of construction: 2025, Surface planer minimax fs 41es TERSA Maximum equipment for the professional. Part number 5503431 Brand Holzkraft / SCM Diagonally toothed steel feed roller for constant and even material feed, resulting in chip removal from as little as 0.2 mm (with min. workpiece thickness of 3 mm) - ideal for economical planing of precious woods Models with TERSA cutterblock for changing planing knives in seconds and particularly quiet running Material feed with two speeds Particularly long dressing tables allow easy and precise dressing of workpieces Work tables made of gray cast iron, annealed and stress-free, thus insensitive and permanently flat Dressing tables opening to the rear simultaneously for short set-up times Planer thickness table adjustment via handwheel with numerical display for planer height Cgiptddi High machine weight for maximum precision and smooth running Powerful industrial motor Robust steel/cast iron construction Quality - Made in Italy TECHNICAL DATA Dimensions and weights Length (product) approx. 2200mm Weight (net) approx. 450kg width/depth (product) approx. 1160mm Dressing table Total length of tables 2200mm Dressing fence length 1200mm Working height 905mm Dressing fence height 150mm chip removal max. dressing 5mm Connection suction Suction port diameter thickness 1 x 120mm Thickness thickness table length 775mm working height thickness max. 240mm Thickness table width 410mm Chip removal max. thickness 5mm Working height thickness min. 3mm Electrical data Power drive motor 5kW Mains frequency 50Hz Isdpfxslht Htj Aabjih Supply voltage 400V Planer cutterhead Planing shaft type TERSA Planing shaft speed 5000min¯¹ Planing shaft diameter 95mm Planing width max. 410mm Number of planing knives 4pcs Feed rate feed speed 6 / 12m/min SCOPE OF DELIVERY Planer jointing fence with round bar guide & auxiliary fence Two feed speeds Tersa planer shaft Location: Ex stock 54634 Bitburg - immediately available -

Condition: used, No. 04493 Combined machine Steko 228 P.B.S. Pressing - Sanding - Sawing Used - Pneumatic veneer press with electric heating Aluminium heating plates 2280 x 1000 mm LW Lower plate extendable Opening width approx. 145 mm Total pressing pressure 40 tons, specific pressing pressure max. 2 kg/cm2 Heating 2x 1,8 kW - Long belt sander 3 kW Table 2600 x 750 mm LW, extendable Sanding height 200 mm Belt length 6800 mm Isdpfx Aaoxl Ha Sebjih Belt width 120 - 150 mm Left/right rotation, speed 19 m/s - Sliding table saw / veneer saw / edging saw 2.2 kW With pneumatic pressure beam Cutting length approx. 2600 mm, cutting height adjustable 0 - 60 mm Saw blade diameter max. 250 mm With chain feed - Extraction for sander and saw 0.55 kW Delivery rate approx. 11 m3/min Push-button control with main and emergency stop switches Machine on trolley Installation footprint according to manufacturer 7.5 m2 Transport dimensions approx. 3900 x 2100 x 1400 mm LWH Weight approx. 2500 kg To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical details, description of condition, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Terms of payment: Prices excl. VAT, payment before collection or dispatch Terms of delivery: ex warehouse

Condition: new, Year of construction: 2024, planing width: 300 mm, planer shaft diameter: 70 mm, rotational speed (max.): 5,700 rpm, table length: 1,500 mm, table width: 300 mm, number of planer blades: 3, spindle speed (min.): 5,700 rpm, Kombinirka sa 3 operacije abrihter ,diht sa busilicom sirina 300mm sa 3 noza , motor 2,2 kw Iodpfet Etrhjx Aabjih

Condition: excellent (used), CATALOGUE NUMBER 7081 TECHNICAL DATA - PLANER: - shaft width 260mm - top length 1190mm - cast iron guide adjustable at an angle - adjustable tops THICKNESS PLANER: - max. thickness of the processed element 110mm - cover for the thicknesser shaft from above: - pawls - pulling shaft, toothed - planing shaft - output shaft, smooth, pulling - diameter of the exhaust port 85mm CIRCULAR SAW: - max. blade diameter 160mm - cutting height 25mm - blade hole diameter 30mm - adjustable blade up/down - blade cover - cutting width at the guide 160mm - top 710x420mm Iiedpfx Ajnabqzsaboh MILLING MACHINE: - 30mm spindle - adjustable spindle up/down - spindle height 110mm - max tool diameter 190mm - guide - engine approx. 2.2kW - dimensions length/width/height 1200x900x800mm - weight 325kg ADVANTAGES - neat, takes up little space - very good condition - multifunctional used Net price: PLN 7900 Net price: EUR 1850 depending on the price EUR 4.25 (Prices may change with higher fluctuations)

Condition: excellent (used), Year of construction: 2022, For sale is a used Hammer circular saw-milling machine B3Winner with a cutting length of 1300 mm. The machine is in very good condition and has been reconditioned and inspected by our professional staff. Technical specifications: - Cutting length: 1300 mm - Cutting width: 800 mm - Cutting height: 103 mm - 4 milling speeds - Direction of rotation switch - Suction connection Ø 120 mm - Height-adjustable and tiltable - 2 motors, each 3 kW - Year of manufacture: 2022 The machine is located in A-5431 Kuchl and can be inspected during our business hours at any time. Subject to prior sale! Related terms: circular saw, milling machine, router, combination machine, combi machine Ijdpfjxdxgzjx Aaboih Reference: R-Y03O4

Condition: new, With a 520 mm planing width, motorized thickness table adjustment, and comfort switching - Stable steel and cast iron construction - Large, ribbed jointer tables made of cast iron - Smooth operation due to high dead weight - Four feed speeds - Motorized thickness table lift with two speeds and digital display - Segmented pressure beam at the infeed - Precision ball bearings on the four-knife cutterblock - Helical, hardened steel infeed roller for especially consistent and gentle wood feed - Outfeed roller with rubber coating Iedpfxoxnqyhe Aabjih - Large tiltable fence, adjustable from 90° to +45° - Standard auxiliary fence included - Powerful industrial motor - Pneumatic quick-change system with pneumatic raising and lowering of the jointer table - The extraction port remains in the same position for both jointing and thicknessing operations—no need for additional extraction hoses, inconvenient switching, or rerouting around the machine Scope of delivery: Technical Data: Dimensions and Weights: - Length (product): approx. 2300 mm - Width/Depth (product): approx. 1100 mm - Weight (net): approx. 980 kg Jointer: - Total table length: 2300 mm - Infeed table length: 1200 mm - Working height: 930 mm - Max. planing depth: 6 mm - Fence length: 1200 mm - Fence height: 190 mm - Fence tilt: 90 – 45° Extraction connection: - Extraction port diameter, thicknesser: 120 mm Installation Information: - Space requirement, length: 2300 mm - Space requirement, width/depth: 1610 mm Explanation: Max. travel paths or usable lengths are taken into account. - Machine body length: 1235 mm - Machine body width/depth: 850 mm - Working area length: 1000 mm - Working area width/depth: 3500 mm Note: Please add the working area to the space requirement to determine the recommended free installation space for the machine. Thicknesser: - Min. working height: 3.5 mm - Max. working height: 250 mm - Max. cutting depth: 8 mm Electrical Data: - Main drive motor power: 7 kW - Connection voltage: 400 V - Frequency: 50 Hz Cutterblock: - Cutterblock type: TERSA - Cutterblock diameter: 120 mm - Number of knives: 4 - Cutterblock speed: 5000 rpm - Max. planing width: 520 mm Feed: - Feed speed: 5/8/12/18 m/min

Condition: excellent (used), 5-axis combined machine (thickness planer, jointer, mortiser, saw, and router) Thickness planer: Usable width: 310 mm Usable height: 230 mm Cutter block: 3 planer knives Joint planer: Usable width: 310 mm Table length: 1400 mm Shaft diameter: 70 mm Router: Spindle diameter: 30 mm, length: 125 mm Table width: 800 mm Router stop Saw: Saw blade diameter: 250 mm, pivotable by 45°. Cutting height with 250 mm blade: 80 mm Table width: 800 mm Rip fence length: 635 mm Mortise drilling machine: Mortise milling from (0 to 16 mm) Iodswh U Eqepfx Aabeih Power and motors Voltage: 380 V Connection: Three-phase Location: From stock, 54634 Bitburg - Available immediately -

Condition: used, Year of construction: 1993, Used machine Year of manufacture: 1993 Iijdpfx Asxfc R Teabeh Equipment and technical data to follow Location: Flörsheim Availability: short term

Condition: like new (used), Year of construction: 2024, Machine Technical Data: Carriage length: 2500 mm X-Roll carriage guide system Saw adjustable from 0–45° Iiodpfx Aaswi Uftsbeh Saw lifting and lowering Digital measurement display on right side Cutting width right: 850 mm Spindle diameter: 30 mm Spindle tilt: 0–45° adjustable Spindle height adjustable Left-right rotation Spindle speeds: 3,500 / 6,500 / 8,000 / 10,000 rpm Max. diameter of milling tools: 230 mm Spindle working height: 115 mm Spindle covers Main saw motor: 5.5 kW Milling motor: 5.5 kW European CE Certificate

Condition: new, Multipurpose combination machine with aluminum sliding table for sawing, milling, surface and thickness planing, and optional long-hole boring Torsion-resistant steel and cast iron construction Machine table made of cast iron, hardened and ground Smooth-running anodized aluminum sliding table, 10-year SCM warranty on slideway wear Large crosscut frame with extendable aluminum telescopic fence and flip stops Combination saw and mitre fence with 45° quick adjustment Max. saw blade diameter 315 mm with optional scoring unit, tiltable from 90° to 45° Helical steel feed roller for consistent timber feed during thickness planing Four spindle speeds, manually selectable Standard with forward/reverse spindle rotation Three independent motors for each working unit Sliding table with ball contact system Fitted with the proven million-fold SCM ball contact system Consistently smooth operation due to hardened and ground guides Not susceptible to dust and dirt thanks to minimal contact point between ball and trapezoidal rail The extraction ports for surface and thickness planing are located on the same (right) side, so the same extraction hose can be used for both planing operations. Helical steel infeed rollers for constant and even workpiece feed Massive anti-kickback pawls for operator safety 3-knife cutterblock ensures optimum planing results Crosscut length: 1600 mm Max. saw blade diameter with scorer: 315 mm Max. cutting height at 90° / 45°: 100/79 mm Max. crosscut width left of blade: 1660 mm Cutting width at rip fence: 800 mm Saw shaft speed: 3500 rpm Saw blade tilt: 90° - 45° Working width: 300 mm Iiedpfxsiiypps Aabjh Surface table length: 1260 mm Cutterblock diameter / number of knives: 72 mm / 3 pcs Table dimension: 300 x 450 mm Min. / Max. working height: 3 mm / 220 mm Max. stock removal: 4 mm Feed speed: 7 m/min Spindle diameter: 30 mm Usable spindle length: 100 mm Max. retractable tool diameter: 180 mm Spindle speed: 3500/6000/8000 rpm Motor power: 3 x 4 kW, 400 V, 50 Hz Extraction port diameter: 4 x 120 mm Saw blade guard extraction port Ø: 60 mm Weight: 430 kg OPTIONS: - Professional fences EUR 300.-- Saw fence with quick lock and micrometric adjustment Surface planer fence 90° ÷ 45° continuously adjustable - Scoring unit incl. blade EUR 292.-- - Handwheel with digital readout for thickness table positioning EUR 129.-- - Mobility kit EUR 119.-- - 2 additional handwheels for unit adjustment EUR 45.-- - TERSA cutterblock, diameter 72 mm EUR 212.-- - Xylent spiral cutterblock with 3 rows of knives EUR 717.-- - Aluminum long-hole boring device EUR 390.-- - 2 flip stops for crosscut fence EUR 150.--

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, For sale is a used Hammer C3-31 4-function combination machine with a cutting length of 1150 mm. The machine is in very good condition and has been refurbished and inspected by our qualified personnel. Technical data: - Cutting length: 1250 mm - Cutting width: 900 mm - Cutting height: 103 mm - 4 spindle speeds - Directional switch Iedjxdknwopfx Aabsih - 3-knife cutter block - Planing length: 1400 mm - 3 motors, each 3 kW - Year of manufacture: 2020 The machine is located in A-5431 Kuchl and can be inspected at any time during our opening hours. Subject to prior sale! Related terms: combination machine, combined machine, planer, thickness planer, thicknessing machine, circular saw Reference: R-B18YQ

Condition: new, Ideal for demanding craftsmen and carpentersThe particularly long dressing tables made of one piece enable easy dressing of the workpiecesWork tables are made of gray cast iron, making them robust and permanently flatRear-opening dressing tables with tension spring support for quick and easy retoolingThanks to the fixed extraction hood, it is not necessary to reposition the extraction hose during retooling, This saves valuable working timeHelically toothed steel infeed roller ensures constant and even wood infeedRubber outfeed roller in the thickness run-out ensures even wood outfeedMaterial feed with four speedsPlane thicknessing table adjustment via handwheel with integrated display for the planing heightDIGITAL: with electric thicknessing table height adjustment and digital displayOn/off switch in operator positionPowerful industrial motorThe high machine weight ensures maximum precision and smooth paration for slot drilling deviceQuality Made in ItalyTECHNICAL DATADimensions and weightsLength (product) approx. 2250 mm Width/depth (product) approx. 1370 mmWeight (net) approx. 695 kgJointerTotal length of tables 2250 mmChip removal max. Dressing 5 mmDressing fence length 1200 mmDressing fence height 150 mmSuction connectionSuction nozzle diameter thickness 1 x 120 mmInstallation informationSpace requirement length 2250 mmSpace requirement width/depth 1440 mmExplanation of space requirement: The dimensions take into account maximum travel distances or effective cknessThicknessing table length 520 mmThicknessing table width 850 mmWorking height thickness min. 3 mmWorking height thickness max. 240 mmWorking length thickness min. 220 mmChip removal max. thickness 5 mmElectrical dataDrive motor power 7 kWSupply voltage 400 VMains frequency 50 HzPlaner cutterheadPlaner shaft type TERSAPlaner shaft diameter 120 mmNumber of planer knives 4 pcsPlaner shaft speed 5000 min¯¹Planer width max. 520 mmFeedFeed speed 5/8/12/18 m/minSCOPE OF DELIVERYJointer-jointer fence with round bar guide4 feed speedsTersa planer shaftManufacturer no.5503501 Ijdpfx Asvwflbeaboih

Condition: used, Combined profile steel shear and hole punch GEKA type HYD 80 / Hydracrop 80/A Machine. No. 9566 Year of construction approx. 2000 Punching force 80 ton. throat 300 mm Punching up to Ø 40 mm in 14 mm sheet metal Flat material shears 450 x 15 mm Angle steel shears 130 x 130 x 13 mm Square shears 45 x 45 mm Round material shears Ø 45 mm Rectangular notcher up to 12 mm Motor power 5.5 kW Mains connection 400 Volt, 50 Hz - Fence with el. stroke release 500 mm - Work table with stop for punching device 550 x 380 mm - Working height of the punching device 1100 mm - Work table with stop for the rectangular notcher 550 x 400 mm Iodpfxerz Tutj Aabjih - Working height of rectangular notcher 930 mm - approx. 21 different punching tools - operating instructions - Original paint finish, not repainted Space requirement L x W x H 1800 x 1150 x 1950 mm Weight 1.7 tons. very good condition

Condition: as good as new (ex-display), functionality: fully functional, Saw-spindle moulder machine Production-level performance. 8.5' sliding table, cast iron saw unit with scoring, rearward tilting shaper spindle for use with power feeder, digital-mechanical readouts MACHINE COMPOSITION: ST 4E SAW-SPINDLE MOULDER - CE norms - minimax st 4e CE version Iedpfoqw Uzrsx Aaboih - Voltage 400 EU - Frequency 50 hz - Version with maximum squaring stroke 3200 mm - Scoring unit with independent motor complete with blade - 2 three-phase motors 7kW (9,5hp) 50Hz - Spindle moulder shaft of 30 mm diam. - Locking by countersunk socket screw

Condition: used, Year of construction: 2004, functionality: fully functional, machine/vehicle number: 11.22-LP6122804, The Finn-Power LP6 SWT is a combined laser and punching CNC machine designed for high-efficiency sheet metal processing. Manufactured in 2004, this model integrates hydraulic punching and CO₂ laser cutting technologies, making it suitable for complex and versatile manufacturing tasks. Iisdpfx Aoxcnipeabjh

Condition: new, Working width 318 / 295 mm Working height 170 mm Motor output 2,25 kW Length of the planing table 1300 mm Number of knives 3 St. Feed speed 5,3 m/min. Dust suction hood 100 mm connected load frequency 400 V Iijdpfx Aaeu Imn Nebeh machine weight ab. 160 kg Dimensions (L/W/H) 1150 x 530 x 930 mm The planer and thicknesser is delivered almost fully assembled. For thickness planing, the same connection is used for suction as for surface planing used. However, this is placed upwards over the storage table.

Condition: new, LUREM C300/5 combined machine. 400V; 50 hz. CE. 2.000 mm cutting lenght. Ø 30 mm spindle. Functions: Iiedpfx Aoxfa Ucsabsh · Table saw · Spindle moulder · Planer · Thicknesser. · Morticing unit (Optional). Highlights: · Stable and robust slidingtable with telescopic arm. · Telescopic scale with 2 moveable flip-stops. · Planer/thicknesser tables with very smooth surface. · Noise reductions libs on the planer/thicknesser. · Three 3 hk motors. · Tilting sawblade. 0-45° · Scoring unit is standard equipment. · 4-speed spindle moulder. 2000/3100/4400/7000 rpm. · All handles made of metal. · Sawfence made of aluminium. · Tiltable planerfence made of aluminium. · The machine can be moved with a standard palletlifter. (Lurem wheelkit optional). We offer the best prices in europe. Safe and fast shipment to all european countries. See many more LUREM machines on our website. Contact os now.

Condition: defective spare-parts repository (used), Surface grinding unit on the left, roller diameter: 100 mm Grinding belt length: 950 x 100 mm Horizontal/vertical table support: 120 x 180/10 x 250 mm Contact grinding wheel on the right, 200 mm diameter, grinding belt dimensions: 50 x 2000 mm 2 spindle speeds thanks to pole-changing motor: 11450/2900 rpm Drive motor: 380 V, 0.9/1.3 kW Space required: 1000 x 400 x 1800 mm Iedpfjwvt I Hex Aabeih Weight: 140 kg

Year of construction: 1985, condition: good (used), machine/vehicle number: xxxx, Technical data: - Bending operation and rolling operation by hand, - max. working width 1020 mm - max. material thickness St 40 1,25 mm - bending angle adjustment via end stop 10 - 180 ° - max. stroke upper beam approx. 85 mm - max. adjustability bending beam 20 mm - shaft diameter 55 mm - upper shaft swivels out - rear shaft parallel + inclined adjustable Iiedjf S Tg Tspfx Aabeh - space requirement approx. W 1500 x H 1400 x D 750 mm - weight approx. 400 kg

Condition: used, Year of construction: 2001, machine/vehicle number: kk1/012077, SECOND-HAND UNIVERSAL COMBINED MACHINE MOD. CU410K - CE RULES - SN kk1/012077 - Year 2001 Iijdpjwrcyqsfx Aabjh

Condition: new, Exhibition machinemain features:quick changeover system to open the tables,speed, ergonomics and safetywork table adjustment via parallelogramdurable precisiontechnical data:usable working width 520 mmtotal table length 2310 mmcutterhead D 120 mmplaner shaft speed 5000 rpm.4 knives 35 mm x 3 mm x 520 mmaluminum planing fence 1200 mm x 190 mmplaning fence inclination from 90° bi s-45°min./max. planing height 3 / 250 mmfeed speed thickness 5-8-12-18 m/tion stroke diameter dressing 120 mmsuction stroke diameter thickness 120 mmbasic equipment and accessories- work table adjustment in infeed by means of parallelogram system,for chip removal by means of degree scale- simultaneous height adjustment and locking of the work tables completewith anti-tilt device- quick changeover system for changing from dressing to thickness machining(CE version) by means of a special support for opening the dressing tablesand an autom. pneumatic positioning system of the suction hood, withhydraulic system- "READY" electronic control. Includes:* Thicknessing table adjustment* Manual, semi-automatic and automatic modes with 99storable work programs* Additional functions: Calculator and hour meter- Machine table with height adjustment through 4 steel threaded spindles- Feed with independent motorization Thickness- Rubber coated feed roller in outfeed- Link pressure shoes in infeed- Planer shaft and cutter holder with markings as positioning aid, withsetting gauge for planing knives- automatic star delta start for main motor- motor power kW9 Hz50 (kW 11 Hz60) (S6 -40%)[S1] kW7,5 PS10 Hz50 (kW9 PS12 Hz60)[S6 -40%] kW9 PS12 Hz50 (kW11 PS15 Hz60)- Operating toolsSafety/protection- Micro-protection switch for the correct positioning of the dressing tablesand extraction hoods- Dressing protection hood (CE Ausf.)- Automatic motor brake on main motor- Thermal protection switch- 110V auxiliary circuit- Emergency stop switch- Lockable main switch- CE declaration of conformity (CE version)Consisting of:R0.20.20 Linvincibile FS 7 CE version93.07.31 Volt 400 EU93.12.01 Frequency 50 Hz34.02.15 "TERSA" cutterhead with disposable reversible knivesComplete with a set of knives24.06.15 Swivelling auxiliary fence for thin workpieces08.32.28 base Iodpfx Aaevxr Swsbeih

Condition: like new (used), For sale is a Hammer edge sanding machine HS950, with a belt length of 2515 mm. The machine is in good condition and has been inspected by our specialist staff. - Belt length: 2515 mm - With oscillation motor - Tiltable 0 - 90° - Motor power: 2.2 kW / 3 HP - Year of manufacture: 2024 - Demonstration machine Isdpjw Hf D Iofx Aabeih The machine is located in A-5431 Kuchl and can be inspected at any time during our opening hours. Subject to prior sale! Info Tel. 06244-20299 Related terms: edge sanding machine, sanding machine, surface finishing Reference: R-A0117

Condition: good (used), Working width 630 mm Working height 230 mm Iedpfsw In E Ajx Aabsih Motor output 5 kW Length of the planing table 2100 mm Number of knives 4 St. Feed speed 10 / 16 m/min. machine weight ab. 1300 kg

Condition: used, 5-fold combined profile steel shears PEDDINGHAUS type 210 AD/13 Machine. No. 529A059 Year of manufacture approx. 1970 Punching machine: Punching force 60 ton. Punch stroke 25.5 mm Punching capacity Ø 25 mm in 16 mm sheet metal Ø 20 mm in 19 mm sheet metal throat depth 365 mm Bar steel shears: Cutting capacity Round 42 mm Square 38 x 38 mm Flat steel shears: Cutting capacity with shearing angle 5° 150 x 13 mm or 200 x 10 mm Blade length 245 mm Profile steel shears: Shearing capacity angle steel at 90° 110 x 10 mm Shearing capacity angle steel at 45° 90 x 9 mm T-steel 110 x 10 mm Notching device: Rectangular notcher up to 12 mm sheet metal Punch dimensions 85 x 50 mm Motor power 3 kW Mains connection 380 Volt, 50 Hz. - Center punch detection device via hand lever and centering device - Mechanical stroke release via hand lever - Flat steel shears equipped with 2° blade - Mechanical hold-down device on the profile steel shears, bar steel shears and flat steel shears Ijdpfxsi Duh Io Aabjih Space requirement L x W x H 1500 x 800 x 1900 mm Weight 2000 kg good condition

Condition: like new (used), functionality: fully functional, Felder 4-in-1 Combination Machine CF7-41 Professional For sale is a used Felder CF7-41 Professional combination machine with a cutting length of 2050 mm and a Felder system planer cutterblock. The machine is used as a demonstration unit in our showroom and is therefore in like-new condition. Technical specifications: - Cutting length: 2050 mm - Cutting height: 103 mm - Maximum saw blade diameter: 315 mm - Four milling speeds - Height-adjustable and tilting - Four-knife Felder system planer cutterblock - Planing width: 410 mm - 3 motors, each 5.5 kW / 7.5 HP - Year of manufacture: 2023 The machine is located in A-5431 Kuchl and can be inspected during our business hours at any time. Subject to prior sale! Iijdpfx Aaow Hbq Debeh For information, call Tel. 06244-20299 Related terms: combination machine, combined machine, planer, thicknesser, thicknessing machine, circular saw Reference: R-A0117