Used Air Tapping Machine for sale (86,467)

Year of construction: 2013, condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 1731 067, Equipment: CE marking, onboard computer, For sale is a tape gluing machine from Herbert Meyer GmbH. Working width: 1800 mm, can operate in continuous mode. Bledpfezfi Hbjx Abtel The machine is from 2013 and is in good technical condition – ready for operation. I can provide more information via email. Power: 32.2 kW Supply voltage: 400 V Supply current: 47.5 A Air supply: 6 bar Fusing machine with a particularly efficient heating zone and precise pressure of the pressure rollers for even pressure. Energy savings and clean operation guaranteed.

Year of construction: 2014, condition: good (used), High-quality Airpad machine from a renowned manufacturer. Suitable for producing custom-designed, air-filled protective and cushioning elements made of PA and PE film, as well as paper-based bubble wrap. Typically, four air cushions are produced per working cycle. Various formats can be produced. For this purpose, 10 programs are available to store multiple parameters. By calling up the corresponding program on the display, air cushions can be produced with lengths ranging from 4 cm to 16 cm and individually defined fill levels. The resulting air cushion strips are then wound into rolls by a motorized device. When the roll is full, the machine automatically shuts down. The finished roll can then be manually removed and used as packaging material. The machine can be moved by pushing it on its rollers and secured in place using brakes. Bjdpfx Ajkkcqqebtjll The machine can be demonstrated while powered on.

Condition: like new (used), Year of construction: 2007, power: 5.5 kW (7.48 HP), For sale is a Solid Air piston compressor (2-cylinder version, 5.5 kW, 2007) in excellent, technically flawless condition – including a matching 500 L compressed air tank (2007). A special feature of this compressor: it was used exclusively as an emergency unit, so it has hardly been run. Accordingly, it has very few operating hours and is in almost new condition, both technically and visually. The compressor has always been regularly serviced, is fully functional, has been inspected, and is ready for immediate use. The included 500 L compressed air tank ensures a consistent, pressure-stable air supply and, by reducing the number of switching cycles, also protects the compressor. Technical data: - Type: Piston compressor, 2-cylinder - Motor power: 5.5 kW - Compression pressure: 10 bar - Displacement flow rate: 916 l/min - Operating speed: 850 min⁻¹ - Compressed air tank: 500 L (included) - Operating hours: very low (used only as an emergency unit) With our comprehensive all-inclusive package, we will personally take care of the complete service for you – from delivery to the commissioning of your new compressor. This includes unloading, setting up, and aligning the system. Our experienced service technicians will then professionally commission the system, carry out all necessary functional tests, and ensure that your Solid Air compressor, together with the 500 L tank, runs reliably and efficiently. In addition, we offer individual training for your employees so that you can use the system optimally from the start. We will also continue to be available to you after installation – whether for maintenance, technical questions, or future expansions. With our comprehensive all-inclusive package, you don't have to worry about anything – we will ensure that everything runs smoothly and that you can focus entirely on your production. Our service promise: Quality, competence, and customer satisfaction are our top priorities. Our team consists of qualified and experienced technicians who specialize in compressed air and compressor systems, as well as other machines. We place great value on personal support and will be happy to assist you at any time, even after the purchase. In addition, you have the opportunity to inspect and test the system at any time in our workshop. You are cordially invited to come and see the condition and operation of the system for yourself. You are in the best hands with us – professional, reliable, and with a passion for machines! PS CNC Service Germany GmbH & Co. KG All information is subject to change without notice. Bsdszlhp Uepfx Abtsll

Condition: excellent (used), XYZ SMX 3500 3 Axis CNC Bed Milling Machine ProtoTRAK SMX Control Spindle: 5HP – Programmable 40 – 5000rpm 2 Ranges 40 – 600 & 300 – 5000rpm ISO40 Quill Dia 105mm Year of Manufacture 2008 Bsdpfszuxn Tsx Abtoll Table: 1370 x 355mm 4 0ff T Slots T Slot size 15.9mm Max load 600kgs Travel: X – 787mm Y – 508mm Head Vertical (Z) – 500mm Quill (Z) 127mm Dims without travel – 1905 x 2069 x 2225mm Dim with travel – 2758 x 2869 x 2490mm Weight 2430Kgs Power Requirements 22A Air Requirements 6bar For sale with Jet Machinery Ltd Jet Machinery Stock No: #79245 Machine Serial Number: 10731 Cost: £17,950.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: excellent (used), Year of construction: 1987, TOYOSK 0-PTMS fixed spindle pitch high speed 12-spindle tapping machine Bodpfx Aswifd Hjbtell Year of manufacture: 1987 Speed ​​(3 stages): 850 / 1200 / 1700 rpm Speed ​​change: Mechanical (stepped stages) Spindles: 12pcs For precision mechanics, small holes / threads. Application: Simultaneous preparation of multiple holes in precise, mass production tasks (e.g. automotive parts, sheet metal, castings)

Condition: excellent (used), functionality: fully functional, 1 x Thread-drilling machine Steinel BT 6.52 with coolant system + small vise Bsdszk Iyqepfx Abtjll Technical specifications: Max. thread size: M 6 (further technical specifications see photos) The machine can be inspected while powered on.

Condition: good (used), Year of construction: 2014, machine/vehicle number: 5890, Offer 25118 Technical specifications: - Tapping capacity approx. M 3 - M 8 - Working range (swivel radius) approx. 1800 mm - Multi-position head - Speeds 8 - 700 rpm - Quick-change tool holder size 1, diameter 19 mm - Pneumatic connection 6 - 8 bar - Table base H 900 mm - Space required approx. W 1000 x H 2000 x D 1000 mm Bedpswmnhpjfx Abtsll - Weight approx. 100 kg

Condition: new, thread dia. M5 - M16 mm 250 U/min. 48 Nm air pressure 6 - 8 bar working area 150 - 1900 mm Bodpfofg U Sijx Abtell The pneumatically driven D-JSC tapping machine has, among other things, one Air motor with quick chuck and a stable and flexible Labor arm. The mounting arm can be attached directly to the work table using the mounting flange and is ready to work immediately. This means fast changeover times guaranteed. It is possible to simply tap the tap to the desired hole to be attached without having to position the component under the tap. Version with an adjustable angle, whereby the quick chuck can tilt so that horizontal tapping is also possible. Pneumatic tapping machines for M5 - M16 threads, angle adjustable. 6 pcs. Quick change chucks with slip clutch. Optional: - Clamping table with T-slots: 750x600x650mm or 990x700x800mm. - magnetic base.

Condition: excellent (used), Year of construction: 1982, TOYOSK 01B-T fixed spindle 12-spindle drilling machine Blodpjwh S E Uefx Abtel Year of manufacture: 1982 Speed ​​(3 stages): 440 / 700 / 990 rpm Speed ​​change: Mechanical (stepped stages) Spindles: 12pcs Tool holder type: spring/clamp chucks Combined drilling + tapping is also possible. Application: Simultaneous preparation of multiple holes in precise, mass production tasks (e.g. automotive parts, sheet metal, castings)

Condition: used, Year of construction: 2019, operating hours: 692 h, travel distance X-axis: 4,500 mm, Third-generation CMA drilling center for steel profiles and structural parts, built 2019 with only approx. 692 operating hours. OMRON touchscreen CNC with dialog and DIN/ISO programming, 4,500 mm X-travel, BT40 spindle 50-4,000 rpm (13.1 kW, up to 125 Nm) for solid drilling up to dia. 36 mm and tapping up to M24 in steel. Pendulum operation for loading during machining, 10-position tool changer, Z-Reader height probing and coolant through spindle. Fully functional. Bledszmyzfopfx Abtel

Condition: excellent (used), functionality: fully functional, TOYOSK 01C 550II-TMS Fixed 48 Multi spindle Machine Manufacturer: TOYOSK Type: 01C 550II-TMS Spindle diameter min.: M4x8 Spindle diameter max.: M4x15 Table size: 280x360mm Spindle speed: 430, 710, 1030 Power: 1.5kW Application: Simultaneous drilling of multiple holes in precise, mass production tasks (e.g. automotive parts, sheet metal, castings) Blodswcp Enspfx Abtol If you need more information. We are here to help! Please contact us using the contact form or give us a call Your ad has been automatically translated. Translation errors are possible.

Condition: good (used), Year of construction: 1989, Offered from an insolvency sale is a ready-to-use thread drilling machine. Manufacturer: Flott Model: SB 15 GL Year of manufacture: 1989 Machine No.: 34177063 Technical data: Cutting capacity: M2-M12 Arbor: MK 2 Quill stroke: 80mm Overhang: 200mm Chuck: Bilz WFP 1 + inserts Drill chuck: Röhm 0-10mm Foot switch Digital display for quill stroke Single-cycle operation Emergency stop Blodpfxsfm S Nas Abtjl Spindle speeds: 80-3150 rpm 380 Volt Motor power: 0.75 kW Max. distance between table and arbor: 380mm Overall height: approx. 1700mm Accessories: 8 pcs. lead screws – pitches: 1.5 – 1.25 – 1.75 – 0.8 – 0.7 – 0.5 – 0.45 – 1.0 Operating manual Weight: approx. 200 kg

Year of construction: 1996, condition: good (used), machine/vehicle number: xxxx, High-performance table-mounted threading drill machines with T-slot table Bljdpfx Abjf Tcy Djtel Technical specifications: - Threading capacity approx. M3 - M16 - Speed range up to 500 rpm - Working area (swivel radius) 2500 mm - Quick-change tool holder, size 2, diameter 31 - Various inserts for quick-change tool holder - Table surface with 5 T-slots 2050 x 900 mm - Table height 910 mm - Machine vise with jaw width 200 mm - 3-jaw chuck 250 mm - Pneumatic connection with pressure reducer - Mobile base - Space requirement approx. W 2400 x H 2000 x D 1000 mm - Weight approx. 1100 kg

Condition: excellent (used), -Multifunctional machine: -PASTEURIZES - COOKS - MIXES Bodpfx Ajwxu Rzobtell - EMULSIFIES - Model: R400 A SH - Dimensions (LxWxH): 600x750x1335 mm - Tank capacity: 40 litres - Maximum water pressure: 0.6 MPa - Refrigerant gas: R404A - Voltage: 400V / 3PH / 50Hz - Serial number: 179342 - Year of manufacture: 2015 - Electronic controls - Semi-hermetic compressor - Air-cooled condenser - Refurbished equipment: The equipment is prepared when ordered; collection and return deadlines are agreed at the time (please request the price after refurbishment). The listing was translated automatically. Translation errors are possible

Condition: excellent (used), - Multifunction machine: PASTEURIZES - COOKS - COOLS - MIXES - EMULSIFIES - Model: R400 A SH - Dimensions (LxWxH): 600x750x1335 mm - Tank capacity: 40 litres - Maximum water pressure: 0.6 MPa - Refrigerant: R404A Bodjwxu R Ispfx Abtell - Voltage: 400V / 3PH / 50Hz - Power: 5300 W - Year of manufacture: 2015 -Iiedcuewxu R Is T Rxiei - Electronic controls - Semi-hermetic compressor - Air-cooled condenser - Refurbished machine: The machine is prepared upon order; delivery and return times are agreed at that moment (please request price after refurbishment).

Condition: good (used), Drilling capacity: up to 10 mm Spindle mount: drill chuck Speed range: Pulley diameters: Motor side: 38; 48; 66; 78 mm Spindle side: 90; 104; 120; 133 mm Motor speed: 800 rpm Stroke: 100 mm Overhang: 300 mm Table: 400 x 400 mm Distance table – drill chuck max: 580 mm Distance table – drill chuck min: 130 mm Table: 400 x 400 mm Blodpoh Hrkijfx Abtsl Footprint: 750 x 480 mm Total power consumption: 0.4 kW Accessories/equipment: drill chuck Condition: good Weight: 170 kg Dimensions: 750 x 480 x 1,450 mm

Condition: excellent (used), Year of construction: 1984, TOYOSK 01C550T Fixed Spindle Pitch 48 Spindle Tapping Machine Year of Manufacture: 1984 Speed ​​(3 stages): 450 / 700 / 1100 rpm Speed ​​Change: Mechanical (stepped stages) Spindles: 48pcs Tool Holder Type: Spring/Clamp Chucks Combined drilling + tapping is also possible. Bjdpowifdgefx Abtjll Application: Simultaneous preparation of multiple holes in precise, mass production tasks (e.g. automotive parts, sheet metal, castings)

Condition: new, thread dia. M3 - M12 metrisch Blsdpfjhiptcox Abtsl 400 U/min. 0 6 - 8 bar working area max. 1100 mm weight 15 kg dimensions 700 x 280 x 200 mm Pneumatic tapping machine Type with an adjustable angle, horizontal tapping possible Pneumatic tapping machines for M3 - M12 threads, angle adjustable. 8 pcs. quick-change chuck with slipping clutch. Documentation in English! Optional: clamping table with grooves type: FL-WB

Condition: used, Zwick tensile testing machine Model: Z20 Controller: BX1-EZ020.A4K-000 Technical Data: Stroke: 200 mm Piston dimensions (H x W x D): 1037 x 385 x 180 mm Fmax: 20 kN Vmax: 125 mm/s Accessories: ClipOn extensometer 13.5 mm Extensometer MFA 25 (temperature range up to +200°C) Computer + Software: testXpert II V3.5 Climate chamber: Airtemp LKG-K-TK-50-040/150 Temperature range: -40°C to +150°C Climate temperature range: 20°C to +90°C Humidity range: 10% to 95% Test chamber volume: 50 liters Temperature change rate: 1 K/min Refrigerant: R404, 5 kg Voltage: 400V 3Ph/N/PE/50 Hz 16 A 9 kW Blsdpfxjzil Ups Abtsl Condition: used Total weight: approx. 1500 kg Scope of delivery: (see picture) (Subject to change and errors in technical data and specifications!) For further questions, we are happy to assist you by phone. Written orders possible by email or fax.

Condition: good (used), Thread Cutting Machine Berg + Schmid Delta 4 Product Description Cutting range: R 1/3 - 4", M8-M52 Powerful capacitor motor 230V-1 kW, exceptionally quiet operation 3 speeds: 15+27+58 rpm (also under full load, built-in gearbox) Bodpfjyy S Efox Abtoll With 2 automatic thread cutting heads: R 1/2 -2", R 2 1/2 - 4" Complete with cutting dies: R 1/2 - 3/4", R1"-2", R 2 1/2 - 4", conical DIN 2999 Automatic cooling directly through the cutting head Quick-release chuck, pipe cutter, internal pipe reamer Includes occupational safety equipment with safety foot switch and 4 support legs

Condition: used, Multihead cutting machine TRA2000/7/7, made by MAIR Including: 1) Loading table 2) Cutting machine with 7 cutting heads 3) Operator control panel 4) Unloading bin Optional to be build new upon requirement : 5) Double output craddle 6) New electrical control panel with frequency converters for cutting motors 7) Sound and safety protection cover Max. tube length: 7.500 mm Max. loading capacity: 2.000 kg Round tubes (outer ø): 12 – 50 mm Square tubes (hxw): 12×12 – 40×40 mm Bledpfeymaypex Abtjl Rectangular tubes (hxw): 12×16 – 50×30 mm Max. thickness: 2,5 mm Length of tubes to be cut: 330 – 7.400 mm Number of cutting heads: 7

Condition: new, Year of construction: 2025, Speeds: Level 1: 37-185 rpm Level 2 150-750 rpm Torque in Nm 165+42 Holder size 2 diameter 31 Capacity M3-M24 Working range R = 1800mm Working height (without wheels) 805mm Includes: Ball-bearing, wear-free parallel arm radius: 1800mm 400V/3ph hydraulic system Clamping table 800x600mm with 3 T-slots 19mm Working and return speeds can be set separately electronically (using a frequency converter) Digital depth setting D-Touch, work cycle of your choice Manual: direction of rotation right/left using push buttons Automatic: digital input of depth, the direction of rotation is reversed at the set depth. Digital speed display (in the D-Touch control) Micro spray system for tool lubrication (integrated in the machine head) Quick-change holder for Bilz thread cutting holder with slip clutch, among others Blodpfx Abjvu Uhtetjl incl. 1 set of running wheels 1 set of thread cutting holder M4-M22/24 1 piece reducing ring for M4

Condition: new, functionality: fully functional, overall weight: 32 kg, input voltage: 230 V, Automatic internal lubrication – coolant is supplied directly to the core drill, increasing tool life and work quality STEPLESS speed adjustment – allows optimal matching of cutting speed to the material being machined Morse taper MK4, enabling the installation of various tools such as twist drills, countersinks, reamers, tap holders, or hole saws Powerful high-torque motor with soft start and overload protection ensures reliable operation Strong electromagnet securely holds the machine in place during operation Ergonomic control panel enables quick and intuitive setting of work parameters Robust machine construction increases stability and minimizes vibrations during machining Wide range of applications – ideal for industrial, workshop, and service use Technical specifications: Drilling diameter (core bit): 100 mm Drilling depth (core bit): 100 mm Drilling diameter (twist drill): 38 mm Spindle stroke adjustment: 275 mm Maximum threading capacity: M32 Spindle speed min.: 50 rpm Spindle speed max.: 800 rpm Speed settings – number of gears / stepless: 1. 50–110 / 2. 20–200 / 3. 200–500 / 4. 320–800 Spindle taper: MK4 Weldon shank: 19/32 mm Distance spindle / base plate: 290 mm Distance Weldon shank / max. plate: 165 mm Magnet holding force: 20,500 N Magnetic base dimensions: 245 x 125 x 50 mm Motor power: 2,580 W Voltage: 230 V Bodjyt I Uujpfx Abtoll Dimensions – width: 330 mm Dimensions – depth: 430 mm Dimensions – height: 830 mm Weight approx.: 31.5 kg

Condition: good (used), functionality: fully functional, For sale is a robust Bohm & Kruse multi-nailing machine, type II 10/600, machine number 6604. This machine is suitable for efficient series production and for simultaneously driving multiple nails, for example in the manufacture of wooden crates, packaging, and similar wooden structures. The nails are automatically fed to the nailing heads via multiple feed tubes. The working height is adjustable. In addition, the machine is equipped with a riveting device. Technical data: Manufacturer: Bohm & Kruse Type: II 10/600 Machine number: 6604 Design: Multi-nailing machine Blsdpfxezxxuue Abtsl Working width: approx. 600 mm Number of nailing positions: up to 10 Automatic nail feed via feed tubes Nail size: approx. 1.1–1.4 mm × 25–40 mm Adjustable working height Riveting device available Mechanically adjustable units Robust cast iron/steel construction Transport dimensions: approx. 1,600 × 1,600 × 2,400 mm Weight: approx. 900 kg Used, robust industrial machine with signs of wear and tear due to age and use, see photos. Transport is possible for an extra charge! The machine is currently still at the customer's site but would be available in the short term! The machine will be inspected before sale. If sold to commercial customers, the warranty will be excluded due to the machine's age. Technical data and equipment may vary. Errors, prior sale and changes reserved. All information without guarantee.

Condition: used, functionality: unexamined, Avdel riveting machine - 2x Avdel 07531 air pressure booster for hydropneumatic riveting tool - 2x Avdel 07535 riveting tool (1 missing chuck for rivets) - Shipping possible for an additional charge. Bsdpezlguiefx Abtjll