Used Rail Drilling Machine for sale (1,00,734)

Condition: good (used), Year of construction: 2015, operating hours: 250 h, functionality: fully functional, For Sale: Guideway Grinding Machine (Retrofitted from Metal Planing Machine) Fodpfx Aexx Uudjg Reft We offer a robust guideway grinding machine, which has been professionally converted from an original metal planing machine. The main advantage lies in its relatively compact footprint in relation to the workpiece capacity. Technical Specifications: • External dimensions (LxWxH): 4,800 x 2,500 x 2,000 mm • Required floor space: 4,800 x 3,500 x 2,700 mm (+ control cabinet, coolant tank, access) • Table size: 2,000 x 800 mm • Distance between columns: 1,000 mm • Travel paths (X/Y/Z): 2,000 / 1,000 / 600 mm Upgrades & Features: • New ball screw spindles and bearings • 2 new motors + 2 overhauled motors • 3 new frequency inverters • New Siemens SINUMERIK 802C baseline CNC system • Large grinding spindle: 2,840 rpm – refurbished + new motor • Small grinding spindle: 18,000 rpm – refurbished • Including control cabinet, coolant tank with pump, and separate, wall-mounted inverter for small spindle Inspection and trial run possible by appointment. Please contact us for more information.

Condition: ready for operation (used), functionality: fully functional, drilling depth: 710 mm, rotational speed (max.): 1,250 rpm, spindle diameter: 100 mm, table length: 1,120 mm, table width: 1,250 mm, Submitting a bid obligates the buyer to collect the item by the deadline of 28/01/2026! A prompt appointment for collection must be arranged after the end of the auction, as the machine has not yet been dismantled. TECHNICAL DETAILS Spindle diameter: 100 mm Spindle taper: ISA steep taper No. 50 Drilling depth in one pass: 710 mm Lowest spindle center height above table: 0 mm Highest spindle center height above table: 1,200 mm Maximum distance between spindle sleeve and tailstock: 2,300 mm Horizontal movement of tailstock: 1,300 mm Spindle speed range: 6 - 1,250 rpm Clamping surface of the table: 1,120 mm x 1,250 mm Longitudinal travel of the table: 1,300 mm Transverse travel of the table: 1,200 mm 34 feed rates for spindle, headstock, and table: 0.017 - mm/rev Infinitely variable feed for headstock and table: 20 - 1,000 mm/min Rapid traverse in all directions: 2,800 mm/min MACHINE DETAILS Main motor power: 11 kW Main motor speed: 1,450 rpm Ffedpfx Agjx Hfuge Rst Current type: Three-phase Voltage: 380 Volt Frequency: 50 Hz EQUIPMENT Documentation including wiring diagram Electrical schematics Operating manuals

Condition: excellent (used), functionality: fully functional, OERLIKON (Switzerland) Model : UB2 Spindle taper : MT3 Vertical Travel : 590mm Fsdexgcy Rjpfx Ag Reft Spindle speed : 25-2560 rpm Table size : 700X880mm

Year of construction: 2013, condition: used, controller manufacturer: Siemens, controller model: 840Dsl, _____ Description: Year of manuf. : 2013 In general: Drilling-ø (max.):3,5 mm Drilling depth (max.):200 mm Deep drilling module: Technology:Drillingspindle Speed (max.):10.000 rpm Power:3,5 kW Fodpfjx E Ingsx Ag Reft Taper:HSK-A40 Equipment/Accessory: Chipmanagement:Chip tray Coolingmanagement:Internal cooling unit with Filter and High-pressure, 140 bar Workpiececlamping:Collet chuck, SMW Autoblok KSZ-MB-040-Z140 Oilmistseparation:Electrostatic extraction, LTA AC 500 Further Accessory:Misc. Single lip driller

Condition: as good as new (ex-display), Year of construction: 2024, Optimum OPTIdrill RD 6 Precise, solid radial drilling machines of top quality. Ideal for versatile use in single-part and series production. • Versatile application range, such as drilling, reaming, and threading • Electrically braked motor • 24V DC electrical system and 2-channel safety chain according to DIN EN 12717 • Heavy, solid, high-quality cast iron • Wide reach thanks to horizontally adjustable machine head • Clearly arranged control panel • Smooth-running swivel and travel axes • Elaborately machined column swivel with optimized clamping for maximum stability and minimal clamping offset • Robust, torsion-resistant boom construction • Boom height adjustment via powerful motor drive and lifting spindle • Drill head gear running in an oil bath • Boom guideways hardened and precision-ground • Chrome-nickel steel gears, hardened and precision-ground, ensuring quiet and smooth operation • Drill head and column can be clamped together or separately or loosened • Right-left rotation • Solid, precise drilling table, generously dimensioned • Hardened and ground clamping table with parallel T-slots • Machine light • Overload protection • Thick-walled cast iron column ensures smooth operation and stability • LED lamp • Coolant system with coolant tank in the machine base RD 6 / RD 7 • Column is hydraulically clamped Dimensions and Weights Column diameter 320 mm Length approx. 2670 mm Width/Depth approx. 1120 mm Height approx. 2760 mm Weight approx. 3200 kg Extension arm Rotation angle 180° Drilling capacity Drilling capacity steel (S235JR) 50 mm Continuous drilling capacity steel (S235JR) 45 mm Drilling table T-slot size 14 mm T-slots Number: 4 T-slot spacing: 180 mm Maximum distance between spindle and drilling table: 1420 mm Clamping table length: 630 mm Clamping table width: 500 mm Clamping table height: 500 mm Clamping table T-slot size: 22 mm Number of T-slots on the clamping table: 3 Clamping table T-slot spacing: 150 mm Min. distance between spindle and clamping table: 0 mm Max. distance between spindle and clamping table: 910 mm Min. distance between spindle and drilling table: 465 mm Speed range: Speed range: 44 – 1023 rpm Number of speed ranges: 12 Electrical data: Total power consumption: 6.5 kW Connection voltage: 400 V Mains frequency: 50 Hz Machine base: Working surface length: 2550 mm Working surface width: 970 mm Motor(s) Spindle motor drive power: 4 kW Drive power Cantilever arm lifting motor 1.5 kW Coolant pump power of drive motor 90 W Hydraulic clamp drive 0.75 kW Ffodpswa Tc Sofx Ag Ret Spindle Quill stroke 270 mm Spindle mount MT5 Quill feed speed 0.06 – 0.2 mm/rev Quill feed speeds 3 Travel path Drill head travel (horizontal) 1250 mm Arm stroke (vertical) 680 mm Maximum spindle-column distance 1600 mm Minimum spindle-column distance 350 mm

Condition: used, machine/vehicle number: 008198, X axis working area: 4200 mm Y axis working area: 1400 mm Ffsdpfox A Hbkjx Ag Rst Working Table: Pod and Rail Main Electrospindle power: 18.5 KW Number of controlled axes: 4 axes Maximum edge height: 60 mm Total number of drilling spindles: 35 Total number of tool changer positions: 26

Condition: new, Year of construction: 2026, functionality: fully functional, total length: 4,440 mm, total width: 1,487 mm, total height: 2,793 mm, input voltage: 400 V, overall weight: 1,900 kg, input current: 16 A, Equipment: documentation/manual, EXPOGLASS® PRIAM is a modern vertical glass drilling machine equipped with electronic feed, automatic drill length measurement, and glass thickness measurement. The machine ensures high precision, smooth operation, and clean edges even with large hole diameters. Polish product – a solid, easy-to-use construction designed for intensive daily work in glass workshops. Technical data Length - 4440 mm Height - 2793 mm Width - 1487 mm Weight - 1900 kg Maximum distance of drilling center to bottom of the glass - 1000 mm Glass thickness - 2 to 20 mm Communication - touchscreen 7” and analogue buttons Spindle feed (motion) - automatic Spindle feed steering - electronic (not pneumatic) Setting of loading bar height - electronic Ffjdpfx Agsh Ek H So Rjt Spindle rotation speed - 700 RPM do 2800 RPM Measurement of the drill position - automatic Drills changing mode - lowering of the white top and blocking spindle rotation Setting of the drilling depth - electronic (calculated by a controller) Horizontal positioning - two row of bumpers with measure (manual) Glass clamping system - pneumatical Hole chamfering mode - installed, electronically driven Automatic glass thickness - installed, electronically Measuring Automatic drill bit diameter - installed, electronically Measuring Drilling in series - installed

Condition: ready for operation (used), Year of construction: 2025, number of axes: 3, Main Drive Number of axis 3 This 3-axis QUICK CNC KQ-63E was manufactured in 2025. It's a multi-spindle drilling machine capable of handling workpieces from 70 to 2800 mm in length and 50 to 1220 mm in width. Features include top and bottom milling spindles, a high-speed tool changer, and brushless servo motors. If you are looking to get high-quality drilling capabilities, consider the QUICK CNC KQ-63E machine we have for sale. Contact us for more information. Application Types Ffedpfxjx D Dnkj Ag Rot Boring & Drilling (Wood)

Condition: good (used), Year of construction: 2004, Ref. -No.: 10604 Manufacturer: UNION Type: TC 110 Year of construction: 2004 Type of control: CNC Control: SINUMERIK 840 D Powerline Storage location: Halberstadt Country of origin: Germany X-Travel: 2000 mm Ffedpfx Agox Sw Nme Rjt Y-Travel: 1250 mm Z-Travel: 1000 mm W-Axis: 550 mm Table Height: 1050 mm Spindle Diameter: 110 mm Number of T-slots: 10 Max. Workpiece Weight: 6000 kg Clamping Area: 1250 mm T - groove width: 22 mm T - slot spacing: 125 mm Tool Taper: ISO 50 Max. Torque: 1639 Nm Feed Speeds X/Y/Z Axis: 6000 mm / min Rapid Traverse X-Axis: 15000 m / min Rapid Travel Y-Axis: 15000 m / min Rapid Traverse Z-Axis: 15000 m / min Feed Capacities X/Y/Z: 16000 x 16000 x 20000 N swivel angle: 360 °

Condition: excellent (used), Year of construction: 2014, bore capacity in steel (diameter) 45 mm arm length 1050 mm Vertikal stroke 450 mm quill stroke 200 mm spindle taper MK 4 spindle turning speed range 15 - 2800 U/min transmission ratio 2 distance spindle /table 710 mm Ffsdpfx Agex Szp Ro Ret weight of the machine ca. 2600 kg dimensions of the machine ca. 3000 x 3000 x 3220 mm

Condition: new, The KB 32 SFV PRO is a high-performance Column Drilling Machine from KNUTH, designed to deliver precision and efficiency for various drilling applications. This robust drill press features an automatic feed system and is particularly well-suited for single part productions and manual series work in both workshops and industrial settings. Made from premium high-quality cast iron, the sturdy base, column, table, and gear head ensure excellent rigidity and durability. The heavy, precision-ground work table is equipped with T-slots for optimal setup versatility. With an infinitely variable drive that boasts low maintenance, the KB 32 SFV PRO is complemented by a convenient touchscreen control panel. Operators can easily access functions such as spindle speed control and an electronically controlled quill feed. The integrated coolant system enhances performance, while the standard LED work light ensures optimal visibility. Experience the reliability of this drill press and enhance your operations—request a quote today to add the KB 32 SFV PRO to your drilling equipment lineup in the Column Drilling Machines category. Ffedpeuyh Unsfx Ag Rst

Condition: used, machine/vehicle number: 008377, X axis working area: 3390 mm Y axis working area: 1535 mm Working Table: Pod and Rail Main Electrospindle power: 13 KW Number of controlled axes: 4 axes Total number of drilling spindles: 32 Fjdpjx Swb Aofx Ag Reft Total number of tool changer positions: 10

Condition: new, Year of construction: 2025, A large and stable radial drilling machine with a large range of revolutions which ensures precise and fast machining. Machine features Large weight and sturdy design ensure stability and vibration-free operation Cube table provides adjustability and easy fixture of workpiece Control panel located at the front of the machine for improved convenience Ground column surface provides easy, precise arm travel Machine equipped with manual head and column arm limiter Large speed range for accurate and quick machining Technical data Maximum drilling diameter 35 mm (cast iron); 30 mm (steel) Distance from spindle to base 360–1300 mm Distance from spindle axis to column surface 260–1300 mm Spindle extension 200 mm Spindle taper MK4 Spindle speed ranges (6): 75, 130, 240, 380, 660, 1200 rpm Spindle feed ranges (3) 0.10; 0.16; 0.25 mm/turn Vertical arm travel speed 1.3 m/min Arm rotation 360° Main motor power 2.2 kW Lifting motor power 0.75 kW Worktable dimensions 510×380×305 mm Machine dimensions 800×1800×2150 mm Weight 1400 kg Default equipment Fedpei D Da Aefx Ag Rsft B16 (3-16 mm) Drilling chuck B16/MK4 Drilling chuck mandrel MK4/MK3 reduction Wedge for taper removal The price is a net price. Price does not include shipping costs. For more information, please contact us by phone or e-mail. We invite you to familiarize yourself with the offer on our website.

Condition: ready for operation (used), Year of construction: 2025, This QUICK CNC KQ-62 Lite multi-spindle drilling machine was manufactured in 2025. It handles workpieces from 70 to 2400 mm in length, 9 to 60 mm in thickness, and 30 to 1220 mm in width. Features include a Higerman control system, dual 3.5 kW milling spindles at 18000 rpm, and comprehensive drilling units. Consider the opportunity to buy this QUICK CNC KQ-62 Lite multi-spindle drilling machine. Contact us for more information. Application Types Boring & Drilling (Wood) Fjdpsx S Sizsfx Ag Roft

Condition: good (used), Year of construction: 1989, Ref. -No.: 10600 Manufacturer: G.BREDA Type: R 55 2000 Ffodsx Sw Ngjpfx Ag Ret Year of construction: 1989 Storage location: Halberstadt Country of origin: Italy Machine-No.: 16XXXXX Spindle Taper: MK 5 Clamping Area: 1000 - 1700 mm Automatic feeds: 0,06 - 1,00 mm / rev Spindle Speed: 30 - 1200 RPM Drive Capacity - Spindle Motor: 400 V / 5,5 kW Bore Capacity In Steel (Diameter): 55 mm Weight Of The Machine Ca.: 4800 t Dimensions Of The Machine Ca.: 2,99 x 1,12 x 2,85 m Drill spindle stroke: 240 mm Drilling performance reaming: 80 mm Thread cutting: M 40 approx. Further information: - Reach min. / max. / 320 / 2005 mm - Column diameter 360 mm - Boom stroke 855 mm - Spindle - base plate approx. 1000 - 1700 mm - E - Central clamping - Cube table - Hydraulic vice - Coolant device The machine can be viewed under power by arrangement.

Condition: new, functionality: fully functional, Drilling capacity in steel St 60: 25 mm Drilling capacity in cast iron GG 20: 30 mm Boring capacity in St 60: 30 mm Fsdpfox Sqt Sjx Ag Rjft Thread cutting in ST 60: M 16 Thread cutting in GG 20: M 20 Short spindle: MK 3 Spindle stroke: 140 mm Throat: 293 mm Column diameter: 115 mm Machine table – usable surface: 514 x 360 mm T-slot quantity – width – spacing: 2 x 14 x 224 mm Distance spindle-table min./max.: 132 / 724 mm Feed: manual Spindle speeds – stepless: 100 – 1,800 rpm Total power requirement: 1.0/1.6 kW Machine weight approx.: 260 kg Standard equipment: - Mushroom pushbutton (latching) for emergency stop - Reversing switch for clockwise and counterclockwise rotation - Motor protection switch - Stepless speed adjustment - Digital speed display - Protection class IP 54 - Plug connector (pre-installed) - Spindle guard with electrical interlock - Paint finish: DD textured varnish signal white RAL 9003, Pantone 7545c, black Special equipment: Pos. 12 LED machine lamp with radially adjustable light beam, connection power 230 V, protection class IP65

Condition: new, Year of construction: 2026, functionality: fully functional, total length: 4,440 mm, total width: 1,487 mm, total height: 2,793 mm, input voltage: 400 V, overall weight: 1,900 kg, input current: 16 A, ELECTRONIC VERTICAL DRILLING MACHINE FOR GLASS Ffjdpfx Asd S Uhqog Rot MODEL: PRIAM BRAND NEW Priam model is a two-spindle (double-sided) vertical glass drilling machine. It is designed for customers looking for a functional and easy-to-use machine that is also durable. When designing it, we went back to the old school of machine construction – on heavy, heat-treated steel bodies with mechanical solutions for subsequent easier operation and servicing. With this different approach to design and manufacturing, our machine ensures many years of trouble-free glass drilling, providing a multiple return on investment. To make sure that the components of our drill are made with due care, we manufacture them in Poland using local contractors. The main body is made on site, by our company, and then heat treated and processed further in local areas. This ensures that all production is carried out under our careful supervision, and any imperfections can be detected and corrected before the product reaches the customer. This ultimately also supports the local machinery industry. The product’s components are at the highest European level. Our suppliers include SIEMENS, HITACHI, UNITRONICS,SCHNEIDER,GARLOCK Mechanical components are accessible, while in-service replacement is simple and quick. The Expoglass Priam drill - functionality at the highest level: ⦁ 2 spindles (front and back) – allowing to drill the pane in a single pass – without turning it ⦁ Electronically controlled loading bar – in order to set the size of the bottom edge of the glass from the hole, you just need to enter the required size on the touch screen and the machine will automatically adjust to the right position ⦁ Quick drilling bit change mode – after pressing the drill bit change button, both spindles are automatically locked (they cannot be turned), the vertical table, located between both drilling bit, slides down – thus opening a large space between them. This means that the drill bits can be unscrewed without the use of a wrench, and there is plenty of space to perform this operation comfortably. ⦁ Automatic (electronic) measurement of the drill bits length and position – after the drill bits have been changed, the machine automatically calibrates them, measuring their length so that it knows the distance between the glass and the drilling end of each bit – very important in small plants where there are no series, but most of the holes are made individually ⦁ Automatic (electronic) calculation of spindle cavity depth – after automatic calibration of spindles, the machine measures the thickness of drilled glass by itself, by pressing the glass, and then selects the perfect values of cavities on its own. The operator's only task is to click the "drill" button, the process is completely automatic ⦁ Electronically controlled feed of the spindles – significantly increases machine capabilities, in addition to enabling the operation of most of the foregoing functionalities, it also makes the feed values perfectly adaptable to any situation and changeable with just a few clicks on the screen. This is illustrated, for example, by the fact that e.g. after drilling a 15 mm piece of glass, you take 10 seconds to change the settings, you can immediately drill a 2 mm glass pane without fear of cracking or chipping. And all this without the experience and "intuition" of the operator

Condition: new, Year of construction: 2025, CORMAK PLBM290 horizontal drilling machine is a professional solution for efficient wood machining. Equipped with advanced features ensuring proper machining quality. Machine features accurate drilling achieved by a bilaterally tilted drilling unit four-level head (16-20-22-25 mm) 2 limiting switches left/right spindle rotation simple, one-handed handling 100 mm diameter extracting connector Technical data Table dimensions 570x300 mm Table extension 600x300 mm Drilling table height 810 mm Drilling depth 155 mm Drilling width adjustment 300 mm Ffedpfxjvuq Hls Ag Rot Height adjustment 160 mm Spindle speed 1400 / 2800 rpm S1 continuous work motor power 3.8 kW Power supply 400V Extracting connector diameter 100 mm Two-jaw chuck 0-20 mm Dimensions 570x850x1340 mm Weight 140 kg

Condition: new, functionality: fully functional, Drilling capacity in St 60 40 mm Thread cutting in St 60 M 24 Thread cutting in GG 20 M 30 Short spindle MK 3 drilling stroke 120 mm throat 293 mm column diameter 115 mm machine table - usable support 514x360 mm T-slots number - width - distance 2 x 14 x 224 mm distance spindle-machine table min./max. 117/701 mm feed rate 0,10 + 0,20 mm/rev. spindle speeds 160-2,250 rpm Total power requirement 1.45/1.9 kW machine height 1840 mm Fodeifkpwopfx Ag Rsft Machine weight approx. 285 kg Standard equipment: - Mushroom pushbutton (latching) for EMERGENCY STOP - Reversing switch for right/left rotation - motor protection switch - Speed adjustment stepless - digital speed display - feed overload protection - protection class IP 54 - Connector plug (ready mounted, cable length 2 m) - Spindle protection with electrical fuse

Condition: new, Year of construction: 2025, CORMAK PBM290 horizontal drilling machine is a professional device created for efficient wood machining. It is equipped with advanced solutions ensuring perfect quality of finished products. Machine features high-quality guides, providing easy table height adjustment easy one-handed usage due to a well-placed handle simple and smooth table movement left/right spindle rotation 100 mm diameter extracting connector Table dimensions 500 x 200 mm Drilling table height 760–900 mm Maximum drilling width 300 mm Maximum drilling depth 140 mm Spindle speed 2850 rpm Drilling chuck 0–16 mm S1 continuous work motor power 2.2 kW Power supply 400V Ffodpjvuq Dksfx Ag Rjt Dimensions 770 x 920 x 1245 mm Weight 102 kg

Condition: new, Year of construction: 2025, functionality: fully functional, CORMAK BH40M Hinge Drilling Machine – Precise Machining of Furniture Fittings The CORMAK BH40M hinge drilling machine is a compact, efficient, and easy-to-use horizontal wood drilling machine designed for precise drilling of holes for furniture hinges. Ideal for carpentry and furniture manufacturing, the machine offers consistent drilling and stable tool guidance. Thanks to its intuitive design and robust components, the BH40M ensures high-quality work while maintaining ease of operation. Main Advantages of the Machine Without a Compressed Air System: Precise drilling for furniture hinges – an adjustable depth stop allows for drilling with full parameter control, minimizing the risk of material damage. Compact and stable construction – a rigid base with a large work table (790 x 390 mm) ensures comfort and safety. Compressed air-free – the lack of a pneumatic system translates into reliability and low operating and maintenance costs. A 0.75 kW motor – the head drive provides sufficient torque for working with Blum hinges and other hardware systems. Three working spindles – allow for simultaneous drilling of holes for the main hinge and side guides. Design and Technology The CORMAK BH40M model is designed with ease of use and durability in mind. A mechanical working head travel of 110 mm and manual control ensure full control over the work cycle. The 10 mm tool shank diameter allows for the use of standard hardware drills. Compact overall dimensions (800 x 630 x 780 mm) and a weight of 45 kg make this furniture hardware drill ideal for field assembly work. Precision and Efficiency Thanks to the optimally selected spindle speed (2800 rpm) and the ability to manually adjust settings, the operator can quickly and accurately drill holes for any standard hinge type. Adjustable drilling depth (up to 20 mm) allows for easy adaptation to various front thicknesses and hinge types. Stable workpiece clamping and parameter control minimize assembly errors and increase the efficiency of the entire process. The CORMAK BH40M hinge drilling machine is suitable for: kitchen, bathroom, and office furniture production, carpentry workshops and maintenance departments, service companies specializing in hardware installation, woodworking schools and training centers. Standard Equipment Three-spindle drilling head for hinges, mechanical guide travel (110 mm), adjustable depth stop, work table 790 x 390 mm, 0.75 kW (230 V) motor, manual control and workpiece clamping. Optional Equipment drill bits for Blum hinges and other systems, positioning templates for various types of fittings, sets of mounting plates and side stops. Ffodow Hbwqepfx Ag Rjt Technical Data Table Dimensions 790 x 390 mm Guide Travel 110 mm Space Between Spindle and Table 155 mm Tool Shank Diameter 10 mm Number of Spindles 3 Max. Drilling depth: 20 mm Speed: 2800 rpm Workpiece clamping: manual Manual control Motor: 0.75 kW Power supply: 230 V Overall dimensions: 800 x 630 x 780 mm Weight: 45 kg

Condition: new, functionality: fully functional, Year of construction: 2025, CORMAK BBM40MAN Hinge Boring Machine – Precision Machining for Furniture Fittings The CORMAK BBM40MAN hinge boring machine is a compact, efficient, and easy-to-use woodworking drill designed for precise drilling of holes for furniture hinges. The machine performs exceptionally well in furniture production, offering repeatable drilling accuracy and stable tool guidance. Thanks to its intuitive design and robust components, the BBM40MAN ensures high-quality performance while remaining simple to operate. Key Advantages Precise drilling for furniture hinges – The adjustable depth stop located at the rear of the machine allows drilling with full parameter control, minimizing the risk of material damage. Compact and stable construction – A rigid base with a large worktable (350 × 300 mm) provides comfort and safety during operation. Powerful 1.1 kW motor – A uniquely strong motor compared with competing machines, providing the necessary torque to work with Blum-type hinges and other hardware systems. Three working spindles – Enable simultaneous drilling of the main hinge cup hole and the side pilot holes. Construction and Technology The CORMAK BBM40MAN hinge boring machine is designed for simplicity, durability, and ease of use. A mechanical feed of the working head with a 110 mm range and manual control ensures full control of the working cycle. The 10 mm tool shank diameter allows the use of standard hinge-boring bits. Compact overall dimensions (370 × 500 × 600 mm) and a weight of 21.5 kg make this hinge boring machine ideal also for on-site assembly work. Precision and Work Efficiency With an optimally selected spindle speed (3000 rpm) and the ability to manually adjust the settings, the operator can quickly and accurately drill holes for any standard hinge type. Adjustable drilling depth allows easy adaptation to different front thicknesses and hinge systems. Stable workpiece clamping and full parameter control minimize assembly errors and increase overall process efficiency. Applications The CORMAK BBM40MAN hinge boring machine is used in: production of kitchen, bathroom, and office furniture, Ffjdpfxjxzdics Ag Rjt carpentry workshops and maintenance departments, service companies specializing in hardware installation, woodworking schools and training centers. Standard Equipment 3-spindle hinge boring head, mechanical fence feed (110 mm), adjustable depth stop, 350 × 300 mm worktable, powerful 1.1 kW motor (230 V), manual control and workpiece clamping, 35 mm cutter + two 2 mm bits for BLUM hinges. Technical Specifications Specification Value Table dimensions 350 × 300 mm Fence feed 110 mm Distance between spindle and table 130 mm Tool shank diameter 10 mm Number of spindles 3 Max. drilling depth 10 mm Speed 2800 rpm Workpiece clamping manual Control manual Motor 1.1 kW Power supply 230 V Overall dimensions 370 × 500 × 600 mm Weight 21.5 kg

Condition: new, Year of construction: 2025, A large and stable radial drilling machine with a large range of revolutions which ensures precise and fast machining. Machine features Large weight and sturdy design ensure stability and vibration-free operation Cube table provides adjustability and easy fixture of workpiece Control panel located at the front of the machine for improved convenience Ground column surface provides easy, precise arm travel Machine equipped with manual head and column arm limiter Large speed range for accurate and quick machining Technical data Maximum drilling diameter 32 mm Distance from spindle to base 340–1125 mm Distance from spindle axis to column surface 330–890 mm Spindle extension 215 mm Spindle taper MK4 Spindle speed 75–1200 rpm Spindle speed ranges (6): 75, 130, 240, 380, 660, 1200 rpm Fedpfxsi D Daqs Ag Rjft Spindle feed (3) 0.10; 0.16; 0.25mm/turn Horizontal plane rotation angle 180° Main motor power 2.2 kW Worktable dimensions 500×330×294 mm Machine dimensions 1400×660×2100 mm Weight 950 kg The price is a net price. Price does not include shipping costs. For more information, please contact us by phone or e-mail. We invite you to familiarize yourself with the offer on our website.

Condition: new, functionality: fully functional, Year of construction: 2025, CORMAK BBM40PNEU Hinge Boring Machine – Precision Machining for Furniture Fittings The CORMAK BBM40PNEU hinge boring machine is a compact, efficient, and easy-to-use woodworking drill designed for precise drilling of holes for furniture hinges. The machine performs exceptionally well in furniture production, offering repeatable drilling accuracy and stable tool guidance. Thanks to its intuitive design and robust components, the BBM40PNEU ensures high-quality work while remaining simple to operate. Key Advantages Pneumatic system – Pneumatic spindle lowering provides convenient and precise positioning as well as drilling repeatability, significantly improving efficiency and the quality of hinge installation. Pneumatic quick-connect system – Allows easy disconnection of the machine from a stationary compressed-air source, and together with its compact design, enables use as a hand-held drill directly on assembly sites. Precise drilling for furniture hinges – An adjustable depth stop located at the rear of the machine allows full control over drilling parameters, minimizing the risk of material damage. Compact and stable construction – A rigid base with a large worktable (350 × 300 mm) ensures comfort and safety during operation. High-power 1.1 kW motor – A uniquely powerful motor compared to competitive machines, providing sufficient torque for working with Blum-type hinges and other fittings systems. Three working spindles – Allow simultaneous drilling of the main hinge hole and the side pilot holes. Ffsdpfexzdhrsx Ag Rot Applications The CORMAK BBM40MAN hinge boring machine is used in: production of kitchen, bathroom, and office furniture, carpentry workshops and maintenance departments, service companies specializing in hardware installation, schools and training centers related to woodworking. Standard Equipment 3-spindle hinge boring head, pneumatic fence feed (110 mm), adjustable depth stop, 300 × 260 mm worktable, powerful 1.1 kW motor (230 V), 35 mm cutter + two 2 mm drill bits for BLUM hinges. Technical Specifications Specification Value Table dimensions 300 × 260 mm Fence feed 110 mm Distance between spindle and table 130 mm Tool shank diameter 10 mm Number of spindles 3 Speed 2800 rpm Workpiece clamping manual Control pneumatic Motor 1.1 kW Power supply 230 V Overall dimensions 350 × 500 × 550 mm Weight 20 kg

Condition: new, Year of construction: 2025, An industrial radial drilling machine featuring simple and rigid construction, providing a broad range of machining, such as: drilling, reaming, deepening, boring and tapping. Machine features - Drilling machine intended for drilling, tapping and reaming - Limited vibration due to a dedicated design of the machine – additional ribbing along with strengthened cast iron - Oiled gearbox, containing ground and hardened gears made of high-quality steel alloy - High weight and sturdy construction of the machine provide stability and vibration-free operation - Cube table guarantees easy workpiece fixture - Sturdy, ground column of large diameter - Ground lower plate, intended for machining larger elements - Arm height adjustment through a motor - Control panel located at the front of the drilling machine for improved convenience - Mechanical arm and head clamping - Boom arm height easily adjustable through raising motor - Hydraulically operated feed and spindle drive - Ground column surface allows for simple and accurate arm travel - Ground and hardened boom guide - Drilling machine equipped with manual head and column arm limiter - Large speed range offers precise and quick machining Technical data Maximum drilling diameter - 50 mm Axis distance from spindle to column - 350–1600 mm Axis distance from spindle to table surface - 320–1220 mm Spindle extension - 390 mm Headstock horizontal movement - 1250 mm Boom vertical movement - 590 mm Fsdpfx Agjg Rcd Uj Rsft Spindle taper - MK5 Spindle speed (16 gears) - 25–2000 rpm Feed range - (16) 0.04–3.2 mm/turn Main motor power - 4.0/5.5 kW Raising motor power - 1.5 kW Machine dimensions - 2500×1070×2840 mm Weight - 3500 kg The price is a net price. Price does not include shipping costs. For more information, please contact us by phone or e-mail. We invite you to familiarize yourself with the offer on our website.