Used Machining Centers for sale (66,355)

Condition: used, Year of construction: 2010, x-travel 508 mm y-travel 356 mm z-travel 508 mm table dimensions 508 x 324 mm spindle tunring speed 10.000 U/min Tool cone CAT 40 spindle drive 15 kW tool magazine 24 Stationen rapid traverse 25,4 m/min feed 18,03 m/min Kedpfx Asxyafwsarjdw weight 6,5 t In our opinion, the machine is in good used condition and can be inspected condition and can be inspected under power by appointment. Operating hours approx. 20,851 hours Accessories, illustrated tools and clamping devices are only included in the scope of delivery if this is noted in the additional information . Changes and errors in the technical data and information as well as prior sale reserved. subject to prior sale

Condition: used, Year of construction: 1999, x-travel 800 mm y-travel 700 mm z-travel 600 mm NC-rotary table ø 900 x 630 mm spindle taper SK 40 spindle turning speed - stepless 20 - 12.000 U/min feeds x/y/z -stepless 20 - 10.000 mm/min rapid travel x/y/z 24 m/min control HEIDENHAIN, TNC 426 NC-rotary table - speed - max. 10,7 U/min NC-rotary table - feed - 3600 °/min table load capacity max. 800 kg no. of tools in magazin 30 tool diameter if 2 vacant positions 160 mm tool diametre at full load 100 mm tool length - max. 315 mm Kedpfx Aajw Eyhfersdw weight of tools max. 10 kg total power requirement 44 kVA = 5 axis (simultan) machining center - NC rotary table = C-axis - univ. milling head = B-axis Accessories: 30 tool fixtures, electron. hand panel, chip conveyor, coolant with filtration

Condition: used, Year of construction: 2017, x-travel 750 mm y-travel 650 mm Kjdpfxoxwzfts Aaredw z-travel 560 mm Control 3D HEIDENHAIN TNC 640 table-size 800 x 650 mm rotary table 650 mm table weight 600 Kg c-axis ° b-axis -120+120 ° Tool diameter 840 mm toolpiece height max. 500 mm rapid taverse 40.000 mm turning speeds 20.000 U/min Tool adapter HSK-A63 Torque 130/86 0 engine output 35 kW Internal cooling system 40 bar Machine on 26.972 h Spindle hours 11.412 h tool change unit 60 pos. Internal cooling system 40 bar total power requirement 49 kW weight of the machine ca. 11.600 kg -Tool charger -No. Positions in the tool charger 60 -Tank with 500l paper filter -Active refrigerator cabinet -Infrared measuring probe Heidenhain piece -Blum laser probe measuring device -chip extractor -Cleaning gun with 2 bar 40 l/min pump -3D quick set -HEIDENHAIN HR-510 Portable Steering Wheel

Condition: used, Year of construction: 2008, x-travel 750 mm y-travel 600 mm z-travel 520 mm tool taper SK40 control i-TNC 530 weight of the machine ca. ca. 9 t Kjdpfx Aexv Ealsarodw DMGDMU 70 Built in 2008 5-axis universal milling machine DMU 70 Travel range X/Y/Z 750/600/520 mm 24 m/min rapid traverse Spindle speed 14,000 rpm Tool holder SK 40 according to DIN 69871 Tool changer 30 magazine slotsTool measurement Blum laserInfrared probe Heidenhain TS 640 Control Heidenhain iTNC 530

Condition: ready for operation (used), controller manufacturer: Fanuc OM, total height: 3,240 mm, total length: 4,100 mm, total width: 6,850 mm, empty load weight: 18,000 kg, additional equipment features: yes, Type: ACE-H80 Kodpfjwttrmsx Aarsdw X-axes: 1250 mm Y-axes: 1000 mm Z-axes: 1000 mm Table dimensions: 800 x 800 mm Max weight on the table: 2000 kg Admission in spindle (ISO): ISO 50 Power on the spindle: 25 kW Number of axes: 4 axes: X,Y,Z,B Toolstore: yes Tools: 90 positions Frequency: 20 -> 4500 rpm Number of pallets: 2x Power principal motor: 70 kva Cooling-system: yes

Condition: used, x-travel 450 mm y-travel 400 mm z-travel 400 mm Control Heidenhain TNC 355 turning speed range 40 - 4000 U/min number of speeds 21 tool taper ISO 40 quill stroke 90 mm Kodpfxjxv D U Ie Aarsdw feed speeds 2-3000 mm/min rapid traverse longitudinal and cross 6000 m/min rapid traverse Z-axis 5000 m/min distance spindle nose and table 450 mm table travel 495 mm table surface area vertikal 300 x 450 mm fixed clamping table 460 x 800 mm max. loading 350 kp dimensions ca. 3150 x 1800 x 2125 mm weight - pallet system ca. 2380 kg weight of the machine ca. 2,4 t incl. variois tool holders SK 40 manual included

Condition: used, Year of construction: 2011, x-travel 3.000 mm y-travel 800 mm z-travel 800 mm control Heidenhain tool taper SK 40 auto power on hours ca. 41.481 h spindle hours ca. 17.969 h In our assessment, the machine is in good used condition and can be inspected under power by appointment. Accessories, tools, and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Kodpfxexx A Nie Aarsdw Technical data and specifications are subject to change without notice and errors. Prior sale is reserved.

Condition: ready for operation (used), Year of construction: 2004, General Data Machine weight 6200 kg Control Unit Brand Röders Model RMS 6 Main Drive Spindle speed range 42000 Number of axis 3 Movement X-Axis Movement 760 mm Y-Axis Movement 550 mm Z-Axis Movement 302 mm Kdedpfjxn U Hxjx Aarow Table Outer length 840 mm Outer width 550 mm Table load 800 kg Tools Slots in storage 24 Type of tool holder HSK40 This Röders RFM 760/2 Universal Machining Center was manufactured in the year 2004 in Germany. It is equipped with a Röders RMS 6 control unit and has 3 axis. The machine has a spindle speed of 42000 rpm. Application Types Milling

Condition: used, Year of construction: 2011, x-travel 2.600 mm y-travel 700 mm z-travel 700 mm Control SIEMENS SINUMERIC 840D table-size 2.900x700 mm table weight 2.150 Kg tool adaptor SK 40 DIN 69872 Kdodpfsv Da T Hox Aarsw workpiece length - max. 300 mm workpiece weight 6 kg workpiece dia. 80/130 mm 30 fach main drive 18,4/14 kW speed 14.000 mm/min rapid traverse 40 m/min feed 40 m/min Machine on 18.859 h Spindle hours 5.666 h internal coolant system feed 40 Bar/600 l Chip coveyor inkl. Machine on 19.230 Spindle hours 5.998 h total power requirement 55 kW weight of the machine ca. 14.520 kg dimensions of the machine ca. 10.280 x 7.230 x 3.042 mm Acceleration in the axis 4 m/s2 -Cleaning gun -Portable handwheel -Direct measurement system

Condition: excellent (used), Year of construction: 2016, x-travel 950 mm y-travel 850 mm Kodpfjvwgrpox Aarodw z-travel 650 mm Control HEIDENHAIN TNC 640 spindle turning speed range 20000 U/min tool taper HSK-A 63 coolant IKZ 40 bar swivable table: 850 x 750 mm c-axis 360° tool change unit 60 Pos. weight of the machine ca. 14 t This DMG DMU 95 monoBLOCK is in very good condition and is available immediately: ACCESSORIES included: - 75 HSK-A63 chucks - Tool trolley - SCHUNK zero point system with: 1 base plate 4 interchangeable tables (plates) 1 vice plate 16 columns Technical data: Clamping surface table C-axis: 850 x 750 mm Clamping surface rigid table: 1,000 x 750 mm Control: 3D control HEIDENHAIN TNC 640 Spindle speed: 20,000 rpm Spindle power: 35 kW (40% ED) / 25 kW (100% ED) Tool holder: HSK-A 63 according to DIN 69893 Tool changing device: Double gripper Magazine slots: 60 (chain magazine) Connected load: 50 kVA Coolant system IKZ: 40 bar / 23 l/min through spindle centre (AD) External coolant supply: 4 bar / 40 l/min EQUIPMENT and DESCRIPTION - MPC Machine Protection Control chip tray with integrated coolant tank 500 l - Scraper belt chip conveyor with coolant system 600 litres, paper belt filter - Infrared measuring probe HEIDENHAIN TS 649 - 3D quickSET extension package - Coolant ring nozzle for vertical headstock, 15 water nozzles, 5 air nozzles - Flushing gun with pump 2 bar / 40 l/min - Cooling device Blast air through spindle centre, selectable via M function - Operating mode 4 - Manual intervention with open work area doors - Documentation

Condition: ready for operation (used), travel distance Z-axis: 508 mm, feed length X-axis: 1,500 mm, feed length Y-axis: 760 mm, controller manufacturer: Mazatrol M2, total height: 2,990 mm, total length: 3,105 mm, Mazak VQC 30/50B X:1500 - Y:760 - Z:508 mm Table dimensions: 1600 x 800 x 500 mm Max weight on the table: 1500 kg Admission in spindle (ISO): ISO 50 Power on the spindle: 11 kW Toolchanger: 24 positions Kjdpjxuwyzsfx Aarjdw Number of rotations: 30 -> 3150 rpm

Condition: used, Year of construction: 2004, x-travel 3.000 mm y-travel 800 mm z-travel 800 mm control Heidenhain tool taper SK 40 auto power on hours ca. 27.834 h Kodpfx Aoxx A Ncearjdw spindle hours ca. 12.357 h In our assessment, the machine is in good used condition and can be inspected under power by appointment. Accessories, tools, and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Technical data and specifications are subject to change without notice and errors. Prior sale is reserved.

Condition: ready for operation (used), Year of construction: 2002, Control Unit Brand Roders Tec Model RMS6 Main Drive Number of axis 3 Movement X-Axis Movement 600 mm Ksdjxn U Hrepfx Aarsdw Y-Axis Movement 450 mm Z-Axis Movement 300 mm Workpiece Workpiece weight 800 kg Table Outer length 700 mm Outer width 550 mm Tools Slots in storage 18 Type of tool holder HSK40 This Röders RFM 600/2 Vertical Machining center was manufactured in the year 2002 in Germany. It is equipped with a Roders Tec RMS6 control unit and has 3 axis. The machine has a spindle speed of 42000 rpm. Application Types Milling

Condition: used, Year of construction: 2001, x-travel 660 mm y-travel 460 mm z-travel 500 mm table dimensions 940 x 460 mm Control Yasnac J300 spindle tunring speed 12.000 U/min tool taper BT 40 number of tool places 30 Pos. In our assessment, the machine is in good used condition and can be inspected under power by appointment. Accessories, tools, and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Kdsdoxxmmrspfx Aarsw Technical data and specifications are subject to change without notice. Prior sale is reserved.

Condition: used, Year of construction: 2007, x-travel 520 mm y-travel 730 mm z-travel 510 mm Control Matsuura Fanuc spindle tunring speed 15.000 U/min table surface area 300 x 300 mm tool taper BT 40 number of tool places 240 Pos. rotating range 360 ° swivelling range ° Number of working hours ca. 20.700 h spindle hours ca. 6.700 h In our assessment, the machine is in good used condition and can be inspected under power by appointment. It is a well-maintained machine with low spindle hours. Ksdpfexxb Iwex Aarjdw Technical features & accessories: - Internal coolant supply - Renishaw touch probe system - Chip conveyor - 5-pallet changer Accessories, tools, and clamping devices shown are only included if explicitly stated in the additional information. Subject to changes and errors in the technical data and specifications, as well as prior sale!

Condition: used, Year of construction: 2001, x-travel 760 mm y-travel 510 mm z-travel 610 mm Control Ultimax max. turning speeds 10.000 min/-1 Kedpfsxxb Iqsx Aaredw tool taper SK 40 In our assessment, the machine is in good used condition and can be inspected under power by appointment. Accessories, tools, and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Technical data and specifications are subject to change without notice and errors. Prior sale is reserved.

Condition: used, Year of construction: 2016, x-travel 1.100 mm y-travel 610 mm z-travel 610 mm table dimensions 1.250 x 610 mm Control Heidenhain turning speeds 15.000 U/min rapid traverse 32 m/min feed 20.000 m/min number of tool places 60 Pos. spindle hours ca. 3108 h In our assessment, the machine is in good used condition and can be inspected under power by appointment. Kdodpoxwzhnofx Aarow Accessories, tools, and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Technical data and specifications are subject to change without notice. Prior sale is reserved.

Condition: used, Year of construction: 2010, x-travel 700 mm y-travel 420 mm z-travel 610 mm Control Heidenhain iTNC 530 spindle tunring speed 30.000 U/min tool taper HSK E50 number of tool places 28 Pos. In our opinion, the machine is in good used condition and can be inspected under power by appointment. Technical Features & Accessories: - 4+5 axes - Clamping device, Erowa Power Chuck ITS148 - Clamping device, Erowa UPC - Blum laser - Renishaw 3D probe - Extraction system Accessories, tools, and clamping devices shown are only included in the scope of delivery if noted in the additional information. Subject to changes and errors in the technical data and information, as well as subject to prior sale! Kdedpfexgicljx Aarsw

Condition: used, Year of construction: 2002, x-travel 1100 mm y-travel 710 mm z-travel 710 mm Control Heidenhain iTNC 530 Number of working hours ca. 79.360 h Kdsdpfsxgicfjx Aarjw spindle hours ca. 34.555 h In our opinion, the machine is in good used condition and can be inspected under power by appointment. Accessories, tools, and clamping devices shown are only included in the scope of delivery if noted in the additional information. Subject to changes and errors in the technical data and information, as well as subject to prior sale!

Condition: used, Year of construction: 1992, x-travel 1000 mm y-travel 500 mm z-travel 700 mm table surface area 1250 x 700 mm spindle tunring speed 20 - 3.200 U/min main drive motor 22 kW quill stroke 100 mm distance spindlenose - table min./max. 138/600 mm Feed ( x / y / z) 3.000 mm/min rapid traverse ( x / y / z ) 60/50/60 m/min total power requirement 27 kW In our opinion, the machine is in very good used condition and can be viewed under power by appointment. Accessories, tools and clamping devices shown are only included in the scope Kdedsxwdw Sjpfx Aarsw of delivery if this is noted in the additional information. Changes and errors in the technical data and information as well Subject to prior sale!

Condition: used, Year of construction: 2001, x-travel 550 mm y-travel 500 mm z-travel 400 mm Control Siemens spindle tunring speed 12.000 U/min table surface area 1050 x 450 mm table load 500 kg weight approx. 6220 kg In our opinion, the machine is in good used condition and can be inspected Kodpexwdwxofx Aarsdw under power by appointment. Accessories, tools and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Subject to changes and errors in the technical data and information as well as prior sale!

Condition: used, Year of construction: 2001, x-travel 2.000 mm Kodpfx Aajxu Nxvoredw y-travel 1.200 mm z-travel 1.400 mm Control Heidenhain 426 spindle tunring speed 3.000 U/min tool taper SK 50 number of tool places 20y Pos. In our opinion, the machine is in good used condition and can be inspected under power by appointment. Technical Features & Accessories: - Controlled rotary table - Milling head with stepless positioning along the B-axis - Automatic tool changer with 20 magazine positions - 2x chip conveyors in longitudinal direction, ejection on the left - Coolant system - Fully enclosed - Various tools Accessories, tools, and clamping devices shown are only included in the scope of delivery if noted in the additional information. Subject to changes and errors in the technical data and information, as well as subject to prior sale!

Condition: used, Year of construction: 2010, x-travel 700 mm y-travel 400 mm z-travel 330 mm Control Fanuc max. turning speeds 10.000 min/-1 tool taper BT 30 number of tool places 14 Pos. In our assessment, the machine is in good used condition and can be inspected under power by appointment. Two identical machines are available. Operating hours Machine 1: approx. 28,040 h Operating hours Machine 2: approx. 43,829 h Accessories, tools, and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Technical data and specifications are subject to change without notice. Kjdpfx Aajwth R Dsrodw Prior sale is reserved.

Condition: used, Year of construction: 2020, x-travel 810 mm y-travel 610 mm z-travel 640 mm b-axis 360 ° Control Ultimax spindle tunring speed 8.000 U/min power capacity 56 kW tool taper SK 50 rapid traverse 45/40/45 m/min auto power on hours ca. 13.674 h spindle hours ca. 4.211 h In our assessment, the machine is in good used condition and can be inspected under power by appointment. Kdjdpfx Aasxtfz Derew Technical features & accessories: - Internal coolant system 40 bar - Dual pallet changer 500mm x 500mm with clamping tower and zero-point clamping system (Quant) Accessories, tools, and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Subject to changes and errors in the technical data and specifications, as well as prior sale!

Condition: used, Year of construction: 2010, x-travel 500 mm y-travel 700 mm z-travel 500 mm A-axis 240 (-120/+120) ° C-Axis 360 ° Kodpfexq R E Nsx Aarjdw control Siemens 840 D faceplate diameter 440 mm T-slot - width 14 mm T-slot - distance 75 mm max. table load 400 kg max. turning speeds 20.000 min/-1 tool taper HSK 63 A workpiece length 330 mm tool diameter 125 mm change-time chip to chip 4,5 sec weight of the machine ca. 10,5 t dimensions of the machine ca. 2,5 x 5,2 x 3,5 m