Used Alg 100 for sale (24,534)

Condition: used, Year of construction: 2008, operating hours: 5,778 h, functionality: fully functional, total width: 1,980 mm, total length: 3,750 mm, total height: 2,050 mm, pressure: 2,500 bar, operating pressure: 2,500 bar, fuel: diesel, overall weight: 2,600 kg, rotational speed (max.): 1,800 rpm, high-pressure hose length: 20,000 mm, water tank capacity: 400 l, volume flow: 1.2 m³/h, empty load weight: 1,940 kg, temperature: 40 °C, fuel tank capacity: 220 l, type of cooling: water, noise level: 103 dB, power: 129 kW (175.39 HP), year of last overhaul: 2026, water pressure: 2,500 bar, cubic capacity: 4,760 cm³, pump capacity: 20 l/min, Equipment: type plate available, Falch trail jet 100 2500-20-0-d with a maximum of 2500 bar and 20 l/min. The pump is driven by a water-cooled 4-cylinder DEUTZ diesel engine. General specifications: ----- Operating pressure: 2500 bar Flow rate: 20 l/min Maximum pump speed: 590 rpm Drive engine: 4-cylinder DEUTZ diesel Drive engine power: 129 kW Bwsdpfxo Agb Dzs Adljw Drive engine speed: 1800 rpm Fuel tank: 220 L Maximum fuel consumption: 12.5 L/h Safety system: ----- Low water level safety valve Burst discs Steel safety frame Impact-resistant water tank Impact- and rust-resistant fuel tank Electronic Falch Easy display system Engine temperature Alarm for open lid Oil pressure Engine overheating Advantages: ----- Shorter setup times Steel safety frame for reduced downtime Water filter for consistent water quality High-quality components reduce maintenance costs Water-cooled diesel engine Long service life Maintenance every 500 hours Low fuel consumption Theft protection Dimensions and unladen weight: 3750mm x 1980mm x 2050 mm (1940 kg) Includes standard accessories (20m HD hose, control cable, gun with lance and jet nozzle) and rotor nozzle. Condition: HD pump has a new seal kit, new battery and water filter. Similar to, but not a Denjet, Dynajet, Hammelmann, Kamat, Uraca, Woma, etc.

Condition: ready for operation (used), Year of construction: 2001, functionality: fully functional, No minimum price – guaranteed sale to the highest bidder! Loading: December 1st to December 10th. TECHNICAL DETAILS General Manufacturer: Fehlmann Type: Picomax 100-CNC3-XL Year of manufacture: 2001 Machine number: 16.600.842 Machine type: Coordinate drilling machine Control system: Heidenhain Work table Table dimensions: 2,100 x 530 mm Number of T-slots: 10 Electrical data Operating voltage: 400 V Frequency: 50 Hz Rated current: 25 A MACHINE DETAILS Dimensions Length: 4,000 mm Width: 2,000 mm Height: 2,500 mm Weight Machine weight: 5,000 kg Bodpfx As Adu Acedlsww EQUIPMENT Cooling unit

Condition: good (used), Extremely practical, heavy-duty table, good quality. Welding rotary table, 100 kg load capacity. Maximum load: 100 kg horizontally. Maximum load: 50 kg vertically. Rotation speed: 0.5-9 rpm. Rotation direction: left and right. Rotary table speed: manually adjustable. Rotary table diameter: 345 mm. Rotary table height: 415 mm. Rotary table tilt angle: 0-90°. Motor power during operation: 0.12 kW. Dimensions: 500 x 470 x 415 mm. Power supply: AC 110V / 220V 50/60Hz. Bodpfx Adocctnajlsww Optional with jaws, additional cost: 160. Delivery to your doorstep: 80.

Condition: new, fuel type: electric, color: white, Year of manufacture: 2021 Year of design: 2021 Model year: 2021 Material used: Concrete CE marking: Yes Damage: None Bodpsuu A Tysfx Adljww Price: On request

Condition: used, filter Plates maximum: 100 Plate formats: 400x400 Platefilter features: Electric-Hydraulic press dimension ca. 300x60x110 cm Distance between first plate and spindle approx ca. 160cm Bwodpfx Ado Ahk H Sslew

Condition: used, Year of construction: 1995, functionality: unexamined, Equipment: chip conveyor, documentation/manual, Table 1250 x 800 mm X/Y/Z - 1000/800/500 mm Spindle speeds 15.000 rpm Spindle taper SK 40 No. of stations in tool changer 24 Control: Bwodpfx Ae Afqinjdlow Grundig dialog 112

Condition: used, Year of construction: 2012, machine/vehicle number: FA62, Used OCME VEGA HT 1002 shrink wrapperTechnical Specifications & Performance DataThis high-speed Shrink Wrapper is engineered for continuous industrial packaging on beverage production lines. Manufactured by Ocme, model HT 100/2, it delivers reliable bundling with film-only configurations across PET, glass, and aluminum containers. Designed for second hand and used bottling line integration, it supports demanding production schedules while maintaining consistent packaging quality.Manufacturer: OcmeModel: HT 100/2Year: 2012Maximum speed: up to 72,000 bottles/hour (line throughput)Container materials: PET, Glass, Aluminum (cans)Current bottle format: 0.33LMaximum container height: 250 mmMachine pitch: 380 mmPackage type: Film only (no tray)Number of lanes: 2Maximum film reel diameter: 500 mmNumber of film reels: 2Operator side: LeftWorking height: 1250 mmElectrical supply: 400 VInstalled power: 210 kWCompressed air: 6 barModel code: HT 100/2Advanced Automation & Control SystemsThe machine features robust automation for high-speed industrial packaging. A Siemens PLC and Siemens HMI provide intuitive control, diagnostics, and recipe handling for quick format adjustments. Automated film handling with dual-reel configuration ensures continuous operation and reduced changeover downtime. The two-lane infeed optimizes throughput and balances product flow for stable shrink-wrapping performance.Siemens PLC for reliable process controlSiemens HMI for operator interface and recipe managementQuick format setup for 0.33L and other compatible sizesDual film reel system for uninterrupted productionOperator-side ergonomics on the left for easy accessProduction Line Integration CapabilitiesEngineered to integrate seamlessly within a used bottling line or new industrial packaging layout, this Shrink Wrapper connects upstream with fillers and labeling machines and downstream with case handling, palletizers, or warehouse systems. It handles PET, glass, and aluminum containers in beverage production and supports flexible multi-format bundling with film-only packages.Inline operation with conveyors and accumulation systemsFilm-only bundle configurations for lightweight secondary packagingSuitable for water, CSD, beer, wine, milk, oil, and spirits applicationsAdaptable to multiple bottle sizes around 0.33L and beyond (within machine limits)Machine Condition & Maintenance HistoryThe unit has been overhauled and is guaranteed, ready for immediate operation. It is offered with compatible spare parts to support commissioning and initial operation phases, making it a strong second hand choice for high-speed beverage a... Bwsdj Adt Dlspfx Adlow

Condition: excellent (used), Year of construction: 1960, functionality: fully functional, machine/vehicle number: V-65R, cutting force: 100 t, total width: 1,400 mm, total length: 6,000 mm, total height: 2,100 mm, overall weight: 8,300 kg, pressure: 30 bar, Arnold baling press SP-100 In very good condition. Regularly maintained and in continuous operation until today. Bodpfx Aez Az Exjdlsww

Condition: used, Year of construction: 2005, controller manufacturer: Heidenhain, controller model: iTNC 530, _____ Description: Year of manuf. : 2005 Bwodpfx Ads Ahl Hfjlow Control : Heidenhain iTNC 530 Speed : 12000 rpm Movement X/Y/Z : 1150/710/710 mm Tool holder : SK40 Spindle: Technology:Motorspindle Speed:12.000 rpm Power:28 kW Torque:121 Nm Taper:SK40 NC-Swivelhead: B-Axis:0,001° Swivelrange:-120°/+30° NC-Roundtable: C-Axis:0,001° Clamping surface:ø800 mm In general: Toolmagazine:2x 16 stations Rapid travers in X/Y/Z:26/26/20 m/min Clamping surface static table:1.500 x 795 mm Table loading (max.):550 kg Equipment/Accessory: Position sensor:Direct scales in all Axes Chipmanagement:Chip conveyor Coolingmanagement:Internal cooling unit with paperbeltfilter and high-pressure, 40 bar Workpiecemeasurement:Infrared-Touchprobe, Heidenhain TS 641 Setup operations:Operation mode 4 Further Equipment:ROTO-Clear, Rinsing pistol Further Accessory:Misc. used Toolholder SK40

Condition: used, Year of construction: 1970, Used Machine Year of manufacture: 1970 Bwjdo Ahr A Iepfx Adlsw Features and Technical Specifications: - Equipped with gold-anodized ELKOM energy-saving plates - Platen size: 2550 x 1350 mm - Total pressing force: 100 metric tons - 4 pressure cylinders, 100 mm in diameter - Opening width: 400 mm - Weight: approx. 4,700 kg The machine does not have a safety pull cord; this can be retrofitted upon request

Condition: used, Year of construction: 2001, functionality: fully functional, x-travel 1000 mm y-travel 800 mm Bedpfxeztfx Ae Adlsww z-travel 500 mm control Siemens 611

Condition: like new (used), Generally overhauled Price: 5.500EUR Bedsx N Ed Topfx Adlsww Spiral dough mixer Capacity: 100 kg of flour 160/180 kg of dough Diosna Container volume: 260 liters Electrical power: 380V / 50Hz / 3N/PE Two timers Two speeds Rewind option Half cover with safety switch Wheels with brakes

Condition: like new (used), functionality: fully functional, Year of construction: 2024, control type: CNC control, degree of automation: automatic, actuation type: electric, For sale: lightly used sheet metal rewinding machine SVM-100, designed for automatic rewinding of sheet metal from large coil rolls into smaller rolls of 25m2 (1250*20,000 mm). The machine was manufactured in 2024, has been used very little, is in excellent technical and visual condition, and is fully ready for operation. It is an excellent solution for companies that produce roofing materials or other sheet metal products supplied in rolls. The machine automatically: - Unwinds the sheet metal from the coil up to 1 ton. If you want to rewind from 2-5 ton coils, an automatic unwinding unit is required to feed the sheet metal. - Winds the sheet metal into a roll. - Cuts the sheet to a specified length. - Allows the roll to be wrapped with stretch film. - Applies protective film to the surface of the sheet metal. The machine is connected – it can be inspected and tested. Technical specifications: Manufacturer: Foldsolutions / UAB Pakservisas Model: SVM-100 Year of manufacture: 2024 Made in: Lithuania Operating parameters: Sheet metal width: 1230–1260 mm Sheet metal thickness: 0.4–0.6 mm Maximum roll length: 20 m Roll diameter: approx. 300 mm Equipment: Automatic sheet metal winding Sheet metal cutting to a specified length Bwedpfx Adszibwgslow Automatic roll packing process with stretch film Option to use protective film on the sheet metal Integrated length measuring encoder Touchscreen control panel Manual and automatic operating modes Pneumatic cutting system Adjustable operating speeds Length calibration function for precise production Emergency stop system Technical data: Electrical power: 400 V / 50 Hz / 3 phases Power: 2.6 kW Required compressed air pressure: 0.65 MPa Air consumption: 0.3 m³/min Dimensions (L × W × H): 2555 × 1730 × 1800 mm Weight: approx. 600 kg Application: Ideally suited for roofing materials, facade, sheet metal products, sheet metal processing companies, and other manufacturers who require fast, accurate, and safe preparation of sheet metal rolls for transport or storage. If you have any further questions, we will be happy to answer them.

Condition: used, Conveyor curve with a 90° angle for bottle conveying systems. Width: 100 mm Angle: 90° Centreline radius: 500 mm Straight connection sections: 50 mm at each end Drawing reference: ID3429-100-90-500 Without chain, feet or drive. Bwodpfx Ae Ahlphedlew

Condition: used, of stainless steel, no feet mit 2 Stück VA- Ablasshähne Technical data: Volume (liter): 100 Diameter (cm): 35 Height with feeds (cm): 77 Tank type: Storage tank Bwsdpfxj Ahlc Do Adlow Material: Stainless steel V2A AISI 304 x Support: Stationary Temperature control: no

Condition: new, Year of construction: 2025, Our SAPI "Mammut" pressure blaster with a 100-liter tank capacity is suitable for all common blasting media. The blasting pressure can be continuously adjusted from 0.1 to 12 bar using the built-in pressure regulator. A water separator is also permanently installed on the blaster, which separates moisture from the compressed air and prevents the blasting media from clumping due to excessive moisture. Bedpfowc Ri Iox Adleww Our safety shut-off system ensures safe operation of the sandblaster. This starts and stops the blasting process by operating the hand lever mounted on the blasting hose. The pressure blaster is delivered fully operational, assembled in a space-saving mesh box. All that's required is to connect the compressed air supply and fill it with blasting media. It can be easily transported by forklift or pallet truck. A lockable aluminum box is installed for storage of protective clothing, spare parts, etc. The scope of delivery includes: SAPI "Mammut 100 L" pressure blaster 1" pressure regulator, permanently mounted 1" water separator, permanently mounted SAPI safety shut-off device Abrasive sieve Cover 10 m blast hose, fully assembled, ø 25x7 mm Silicon carbide Venturi long nozzle, diameter optionally 6 mm, 8 mm, or 10 mm RED 2 sandblasting helmet Nylon/cotton sandblasting overalls 1 pair of leather blasting gloves 10 m breathing air hose, fully assembled SAF breathing air filter/activated carbon filter Wearing parts set consisting of: 100 tear-off films for RED 2 10 inner discs for RED 2 1 blast hose coupling, 25x7 mm nylon 2 rubber seals for blast hose coupling 1 nozzle holder, 25x7 mm Grid box with blast hose holder Aluminum box Lockable Technical specifications of the pressure blaster: Precisely adjustable from 0.1 - 12 bar TÜV-certified with certificate Fixed 1" internal and external piping Rubber-coated metal cone with rubber seal Large hand hole Rubber-wheeled chassis Abrasive dosing valve (suitable for all common blasting media) Capacity: 100 l Total height: 1,130 mm Bowl diameter: 490 mm Total diameter: 900 mm Weight: approx. 75 kg Dimensions of the mesh box: Length: 1,460 mm Width: 840 mm Height: 1,400 mm Total weight including all accessories: 260 kg

Condition: good (used), For sale: used industrial submersible pump, KSB KRTF 100-250/74UG2-249, complete with control box, cables, and chain. The pump features a side discharge connection with a Storz-type coupling and a base for positioning the unit. Data from the nameplate: Manufacturer: KSB Type: KRTF 100-250/74UG2-249 Capacity: 5–180 m³/h, maximum approximately 3000 l/min Head: 17.4–6.2 m Bjdjz Spiqspfx Adloww Rated power P2: 7.5 kW Supply: 400/690 V, three-phase Frequency: 50 Hz Rotational speed: 1450 rpm Rated current: 15.3/8.4 A Maximum medium temperature: 40°C Degree of protection: IP68 Operating mode: S1 Insulation class: F Power factor cos φ: 0.81 Impeller diameter: 249 mm Included in the set: Pump with motor. Control box with buttons, switch, and operating hour counter. Power and control cables. CEE power plug. Chain. Storz-type discharge coupling.

Condition: used, functionality: fully functional, Year of construction: 1989, For sale: TRUMPF MINIMATIC 100 punching machine. Lightly used, in excellent condition, and comes with many tools. The machine is connected and can be tested. We can provide training on how to use the machine; all instructions are available. Specifications: Make: TRUMPF MINIMATIC 100 Made in: Germany Bwsdoy Udrmepfx Adlow Year: 1989 Capacity: 15 T / 150 kN Other: Automatic 9-tool changer Weight: 5T If you have any further questions, please do not hesitate to ask.

Condition: excellent (used), Year of construction: 2011, Type: Horizontal CNC: Yes MAZAK QUICK TURN SMART 100 S Machine type: CNC Horizontal Turning Machine Manufacturer: Yamazaki Mazak Model: QUICK TURN SMART 100 S Year of manufacture: 2011 Country of manufacture: Singapore CNC control: MAZATROL SMART Number of axes: 2 Chuck size: 6” Maximum spindle speed: 6,000 rpm Maximum turning diameter: 280 mm Maximum machining length: 310 mm Maximum swing over bed: 580 mm Bwsdpjz Hdx Sofx Adlsw Bar capacity: approx. 51 mm X-axis travel: 200 mm Z-axis travel: 340 mm Turret: 12-station Tailstock: Yes Spindle nose: A2-5 Spindle bore: approx. 51 mm Machine weight: 3,400 kg DESCRIPTION : MAZAK QUICK TURN SMART 100 S CNC lathe, manufactured in 2011. Equipped with MAZATROL SMART CNC control, 2-axis configuration, 6” chuck, 12-station turret and spindle speed up to 6,000 rpm. Maximum turning diameter 280 mm and machining length 310 mm. Machine weight: 3,400 kg.

Condition: used, Year of construction: 2006, machine/vehicle number: M324, Used SACMI VOLOMAS 3S10020 filling triblockTechnical Specifications & Performance DataThis rotary isobaric filling monoblock is engineered for high-speed PET bottle applications in beverage production and industrial packaging. Designed and manufactured by Sacmi, it combines precise filling with integrated capping to deliver reliable performance in a used bottling line or second hand packaging environment. With neck-handling transfer and CO2 capability, it is suitable for both still and carbonated products, including soft drinks.Production speed: up to 40,000 bottles per hourCurrent bottle format: 1.0LContainer type: PET bottles, neck-handling transferFiller valves: 100Capper heads: 20Machine type: Rotary, counterclockwise rotationCO2 capability: Yes (isobaric filling for carbonated products)Maximum container height: 350 mmMachine pitch: 113.1 mmOverall dimensions (mm): 8,964 x 6,663Electrical supply: 400V, 3Ph + Earth, 50 HzInstalled power: 25 kWWorking pressure: 6 barModel code: VOLOMAS 3S/100/20Advanced Automation & Control SystemsThe monoblock integrates robust automation for stable, repeatable operations and quick format handling. Operator-friendly controls and diagnostics streamline changeovers and daily production tasks.Control system: PLC and HMI by leading industrial automation platformsAutomation: Fully integrated monoblock with synchronized filling and capping turretsQuick change: Neck-handling design to minimize mechanical adjustments between formatsElectrical specs: 400V, 50 Hz, 25 kWOperator protection: Enclosed guardings with interlocks and emergency stopsProduction Line Integration CapabilitiesOptimized for in-line operation within complete bottling lines, this monoblock interfaces seamlessly with upstream and downstream equipment in beverage production and industrial packaging environments.Integration: Compatible with conveyors, premix/carbonation systems, and downstream labeling/packagingOperation modes: In-line with synchronized transfer at the neckFlexibility: Suited for PET bottle ranges including typical sizes such as 0.5L and 1.0LAccessories included: Cap elevator, premix interface, and CIP connectionMachine Condition & Maintenance HistoryThis second hand filling monoblock is presented refurbished and guaranteed, ready for operation with compatible spare parts. It is configured for 1.0L PET and is prepared for rapid commissioning within a used bottling line.Status: Ready for operationCondition: Refurbished and guaranteedSpare parts: Delivered with c... Bodpfj Adyy Hex Adleww

Condition: good (used), functionality: fully functional, Motor-powered sheet metal shear from SCHECHTL, cutting capacity: 1020 x 3 mm mild steel / 2 mm stainless steel. Bjdpfx Ade Ahkfcoloww

Condition: ready for operation (used), Year of construction: 2017, Vötsch VAW 60/100 Heat Oven / Heating Cabinet / Furnace Internal dimensions: 600mm x 1000mm x 600mm (W x D x H) External dimensions: 1800mm x 1800mm x 2200mm (W x D x H) Rated temperature: 650 °C Year of manufacture: 2017 Nominal power: 20 kW Bwsdpfxowykz So Adljw You are welcome to arrange a viewing. We can organize cost-effective shipping for you upon request. You will receive a proper invoice. For international customers, a net invoice can be issued provided a valid VAT ID number is supplied. Subject to prior sale. Visit our shop to see more of our offers. All listed company names and trademarks are the property of their respective owners and are used for identification and description purposes only. Deviations from technical data as well as errors in the description of the item may occur and are reserved.

Condition: excellent (used), functionality: fully functional, overall weight: 12,000 kg, For sale: Untha RS 100. Power: 2 x 75 kW. The machine has undergone a major overhaul. Many parts have been replaced. A complete list of repairs is available for review. Bwjdpfx Ads Agcwdolew Equipment: Perforated screen. Electrical cabinet. Base with discharge conveyor belt. More technical information and price available upon request. Additional photos or a video of the machine in operation can be provided.

Condition: good (used), Year of construction: 1980, power: 3 kW (4.08 HP), pressing force: 10 t, stroke length: 300 mm, total length: 1,400 mm, total width: 1,300 mm, total height: 3,300 mm, overall weight: 2,000 kg, Equipment: documentation/manual, safety light barrier, Year of manufacture: 1980 Equipment: – Filter cleaning, upper and lower stroke limit, – 2 operating modes Bwsdpfx Adj Aaviielew – Venting system – Safety light curtain – Safety distance 110 mm (min.) – After-travel distance 12 mm (max.)

Condition: excellent (used), Year of construction: 2017, operating hours: 1,600 h, 1,0 St. gebr. Zweikomponenten Spritzgießmaschine Elektrisch Hersteller: DR. BOY Typ: 100E Typ: 552 Baujahr: 2017 Schließkraft: 100 Tonnen Holmabstand (hxv) 430 x 360 mm Einbauhöhe MIN. 250 mm Schnecken DN 1: 42 mm Spritzteilgewicht 1: 157,6 g/PS Schnecken DN 2: 24 mm Spritzteilgewicht 2: 39,1 g/PS Steuerung: PROCAN ALPHA Bjdpszxrc Sefx Adljww Ausstattung: 1 x Kernzug Hochschleißfeste Plastifizierungseinheit Steuerung Pneumatische Nadelverschlußdüse Trockner, Hersteller: FARRAG, Baujahr: 2016