Used Altendorf C 45 for sale (124)

Condition: new, Year of construction: 2022, New machine Iedpfx Aew I Uxcjb Ija Year of manufacture: 2022 Standard Equipment: - Electrically powered height and tilt adjustment (0–46°) with automatic correction of cutting height during tilting - Eye-level, swiveling control panel - Double roller carriage, carriage length 3,000 mm - Manually adjustable rip fence with scale, including manual fine adjustment, max cutting width 1,000 mm - Crosscut fence with fixed 90° position, manually adjustable via scale up to 3,200 mm - Max saw blade projection: 150 mm - Max saw blade diameter: 450 mm - Drive power: 4 kW (5.5 HP) at 4,000 rpm - AKE main saw blade clamping system - Working height: 91 cm Motor 5.5 kW (7.5 HP) with VARIO F45: - Stepless speed control from 2,000–6,000 rpm - Precise speed adjustment to the material increases cutting quality and blade service life Extended Cutting Height for Single-Side Tilting: - This option enables single-side tilting with a large extraction hood for max blade Ø 550 mm and a blade projection of up to 204 mm - In combination with a scoring unit: max blade Ø 500 mm / max cutting height 179 mm - Only available in conjunction with at least 5.5 kW (7.5 HP) drive power 2-axis Scoring Unit for Tilting: - With motorized height and lateral adjustment, programmable scoring blade height with quick lowering and raising - Drive motor 0.75 kW (1 HP), 8,200 rpm - Retrofitting only possible on machines prepared for the scoring unit LED Lighting: - Highly energy-efficient LED technology for clear marking of the scoring area The Altendorf double roller carriage is renowned for its smooth operation and precision run. It can be locked steplessly in any position. The large double rollers, precision-manufactured from hardened steel, ensure the upper carriage remains absolutely accurate in conjunction with the lower carriage on the hard-chromed guide bars. This running quality is maintained even after decades of heavy use and exposure to dirt. The carriage construction features a highly rigid, torsion-resistant multi-chamber design. The table surface is finely planed and anodized. A hard-chromed round bar in the upper carriage serves as both the mount for the cross-slide and the interface for various accessories. The entire unit is low-maintenance and does not require lubrication. On/Off Switch on Double Roller Carriage: - The on/off switch on the double roller carriage is always within easy reach. With four buttons, both the main saw blade and the scorer can be switched on and off, saving time and increasing safety. Angle/Mitre Fence, Crosscutting up to 3,500 mm: - This Altendorf-patented fence with integrated length compensation makes it easier to cut angles and mitres precisely in a single operation. In both positions, the swivel angle is steplessly adjustable by up to 49° and displayed on a scale. The play-free and robust stop flaps can easily be moved and adjusted as a single flap over the entire area up to max. 3,500 mm.

Condition: reconditioned (used), Year of construction: 2020, functionality: fully functional, machine/vehicle number: 20-11-14-007, cutting length (max.): 3,430 mm, cutting width (max.): 1,300 mm, saw blade diameter: 500 mm, table length: 1,200 mm, Factory-refurbished Altendorf F45 with ElmoDrive control and parallelogram cross-slide! TECHNICAL DETAILS Maximum cutting length: 3,430 mm Maximum cutting width: 1,300 mm Saw blade diameter: 500 mm Table length: 1,200 mm Saw blade projection 90° with single-sided tilting: 179 mm 90° with double-sided tilting: 179 mm +45° with single-sided tilting: 123 mm +45° with double-sided tilting: 123 mm -45° with double-sided tilting: 96 mm MACHINE DETAILS Dust extraction connections Extraction at the top: Ø = 80 mm Extraction at the bottom: Ø = 120 mm Vacuum pressure: 1,200 Pa at total suction port, Ø = 140 mm Iedoxc Uhfspfx Ab Iea Air consumption: v_min = 1,110 m³/h at 20 m/s Air cushion table Compressed air consumption: 200 l/min at 1 bar (max. 400 l/min at max. 3 bar) EQUIPMENT Reinforced TPL support 1,200 mm On/off switch on DRW Extendable cross-slide extension Front support roller Laser - kerf indicator

Condition: excellent (used), Equipment: scorer, Electric adjustment of saw blade height and angle; scorer. You can call or write to us. We can speak and write in German and Russian. You can also send messages in English. Ijdpfxjw Ix Alj Ab Iea

Condition: good (used), Altendorf tkr 45 panel saw, Sliding table 140 cm, Main motor 5.5 kW, Max. blade diameter 400 mm, Blade tilt and height hydraulically adjustable, Cutting width to the right 85 cm, Iodsw Rnvyjpfx Ab Ija Machine in good condition.

Condition: good (used), Year of construction: 1990, cutting width (max.): 1,000 mm, cutting height (max.): 140 mm, table length: 1,400 mm, power: 5.5 kW (7.48 HP), Types:F 45 ,Machine nr:90-8-86 Iodpfx Abjtxh Nio Ija

Year of construction: 1991, condition: used, Underfloor circular saw, crosscut saw, pull saw, chop saw, sliding table saw, table saw, circular saw, panel saw Isdpfx Aemydmbjb Ija -Manufacturer: Altendorf, sliding table saw type TKR 45 -Main motor: Bauknecht 5.5 kW with brake -Scorer motor: Emod 0.75 kW -Speed: 3000/4000/5000 rpm -Saw blade: Ø 300 mm / max. Ø 350 mm -Max. Cutting height: 90° 95 mm / 45° 70 mm -Miter cut: up to 45° -Cutting width: 2250 mm -Table length: 1400 mm -Dimension total 3480/1530/H1370mm -Weight: 1104 kg

Condition: good (used), Year of construction: 1994, functionality: fully functional, Format circular saw Altendorf F 45 Year of manufacture: 1994 S/N 94.09-172 Manufacturer: Wilhelm Altendorf GmbH & Co. KG General Information Machine type: Format circular saw Version: Without scorer Technical Data Aluminum sliding table 3000 mm Main saw blade diameter: max. 450 mm (recommended: 300–350 mm for standard work) Cutting height at 90°: up to approx. 150 mm (dependent on saw blade diameter) Cutting length (sliding table): depending on version, typically 3000 mm Cutting width at rip fence: approx. 1000 mm Main saw speed: Multi-stage – approx. 3000 / 4000 / 5000 rpm Main saw motor power: approx. 4 kW (optionally up to 5.5 kW) Saw blade tilting: 0–45° (manually adjustable) Height adjustment: manual via handwheel Equipment Massive, ball-bearing aluminum sliding carriage (precision-guided) Ijdpfxewrfmaj Ab Isa Crosscut fence with adjustable angle stop and flip stops Robust rip fence with fine adjustment and digital display Table extension (depending on configuration) Mechanical height protection / saw blade guard Features No scorer: The machine is especially suitable for solid wood and rough cutting of panel materials. Solid industrial quality – durable solid mechanics, easy maintenance Cast iron machine table for high smoothness and precision EXTRA: Altendorf Digit X readout unit at the rip fence Weight 1,100 kg L x W x H = 3.0 m x 1.6 m x 1.5 m

Condition: ready for operation (used), Year of construction: 2018, functionality: fully functional, machine/vehicle number: 18-03-12-070, cutting length (max.): 3,000 mm, cutting width at rip fence: 1,300 mm, saw blade diameter: 450 mm, Equipment: rotational speed infinitely variable, Manufacturer-refurbished Altendorf F45 ProDrive with angle miter fence and Digit L display! TECHNICAL DETAILS Maximum cutting length: 3,000 mm Cutting width at rip fence: 1,300 mm Table length: 840 mm Main saw blade diameter: 450 mm Saw blade projection 90° with single-sided tilt: 154 mm 90° with double-sided tilt: 154 mm Isdpfx Aboxc Ufqe Iea +45° with single-sided tilt: 105 mm +45° with double-sided tilt: 105 mm -45° with double-sided tilt: 78 mm MACHINE DETAILS Power: 7.5 kW (10.20 HP) Dust extraction connection Upper extraction: Ø = 80 mm Lower extraction: Ø = 120 mm Negative pressure: 1,200 Pa at total extraction connection, Ø = 140 mm Air consumption: v_min = 1,110 m³/h at 20 m/s Air cushion table Compressed air consumption: 200 l/min at 1 bar (max. 400 l/min at max. 3 bar) EQUIPMENT Continuously variable speed Template holder Front support roller Air cushion table WGA Digit-L PA 1300 mm CNC

Condition: not inspected (used), Year of construction: 1979, functionality: unexamined, Power rating: 380V 5.5kW Star-delta switch Edging carriage length: 3200 mm Height adjustment and tilting via handwheel Cutting width: 1000 mm Iedpfev Uqa Eox Ab Ioa Parallelogram guard with narrow cover Cross table with stop Rip stop Scoring unit WITHOUT miter stop

Condition: used, Year of construction: 2005, functionality: fully functional, cutting width (max.): 1,300 mm, saw blade diameter: 500 mm, table length: 3,400 mm, height adjustment type: electric, power: 5.5 kW (7.48 HP), Panel saw Manufacturer: Altendorf Type: F45 Elmo CE Iodevnrmyjpfx Ab Ioa Year of manufacture: 2005 Carriage length: 3,400 mm Cutting width: 1,300 mm Cutting height: approx. 171 mm Max. saw blade diameter: 500 mm Speed: 2,000 - 6,000 rpm Cutting width adjustment: Electric Motor brake: Yes

Condition: good (used), Year of construction: 1985, functionality: fully functional, machine/vehicle number: 85-10-116, Equipment: scorer, Machine no: 85-10-116, Type: TKR 45 Table: 1400X400mm Vorrizer, Isdewkha Tepfx Ab Ija

Condition: new, Year of construction: 2025, functionality: fully functional, cutting length (max.): 5,000 mm, cutting width (max.): 1,300 mm, saw blade diameter: 450 mm, height adjustment type: electric, type of input current: three-phase, Equipment: lighting, motor brake, rotational speed infinitely variable, scorer, You can get all common Altendorf models, including the F25, F35, WA80, and F45, as well as the Hand Guard machine in all variations. Basic Equipment Electrically driven height and tilt adjustment 0-46° with automatic cutting height correction when tilting Controls at eye level, tiltable Double sliding table, table length 3,000 mm Parallel stop, manually adjustable via scale, including manual fine adjustment Cutting width 1,000 mm, larger available upon request. Angle stop with fixed 90° position, manually adjustable via scale up to 3,200 mm Maximum sawblade projection: 150 mm Isdjwf Hdgopfx Ab Iea Maximum sawblade diameter: 450 mm Drive power: 4 kW (5.5 HP) at 4,000 rpm AKE tool clamping system for the main sawblade Working height: 91 cm Motor: 5.5 kW (7.5 HP) with VARIO F45 - Continuously variable speed control from 2,000 - 6,000 rpm - Precise speed adjustment to the material increases cutting quality and sawblade service life Extended cutting height for one-sided tilting This option is equipped with a large extraction hood for a maximum sawblade diameter of 550 mm and a maximum sawblade projection of 204 mm for one-sided tilting. In combination with a scoring unit, the maximum saw blade diameter is 500 mm or 179 mm cutting height. Only in conjunction with a minimum drive power of 5.5 kW (7.5 HP). 2-axis scoring unit, single-axis tilting With electric height and lateral adjustment, programmable scoring blade height with quick lowering and quick raising, drive motor 0.75 kW (1 HP), 8200 rpm. Retrofitting only possible on machines prepared for a scoring unit. LED lighting With particularly energy-efficient LED technology, the danger area of the scoring unit is clearly marked. The Altendorf sliding table is famous for its smooth and precise operation. It can be infinitely locked in any position. The large double rollers, precision-machined from hardened steel, hold the upper carriage in connection with the lower carriage with absolute precision in their respective hard-chrome-plated guide rods. This smooth running quality is maintained even after decades of use and contamination. The carriage is designed as an extremely torsion-resistant and dimensionally rigid multi-hollow chamber system. The table surface is precisely planed and anodized. A hard-chrome-plated round rod, which is positively embedded in the upper carriage, serves as a mount for the cross slide and as an interface for various accessories. The entire unit is low-maintenance and requires no lubrication. On/Off Switch on the Sliding Table The on/off switch on the sliding table is always within easy reach. The four buttons turn both the main saw blade and the scoring unit on and off. This saves time and ensures greater safety. Angle and miter stop, cutting to lengths up to 3500 mm This ALTENDORF-patented stop with integrated length compensation facilitates precise cutting of angles and miters in one function. In both positions, the tilt angle is continuously adjustable by 49° and is displayed on a scale. Ask us about your dream machine and we will be happy to advise you. We are happy to arrange viewings directly at the machine, in the factory, or with wood dust in the air.

Year of construction: 1980, condition: good (used), Format panel saw Altendorf F 45 year 1980 S/N 80-8-203 Slide length: 2500 mm Height and swivel adjustment manual with wheel Motor power: 5, 5kW Cutting width: 800 mm 4 speeds 3/4/5/6000 rpm, blade diameter max mm: 450 Weight approx. 1100 kg Ijdeipv Rlepfx Ab Isa technical specification under subject

Condition: reconditioned (used), Year of construction: 2016, functionality: fully functional, machine/vehicle number: 16-08-12-016, cutting length (max.): 3,000 mm, cutting width at rip fence: 1,300 mm, saw blade diameter: 450 mm, table length: 840 mm, Equipment: rotational speed infinitely variable, Factory-reconditioned F45 with EvoDrive control & additional features!\n\nTECHNICAL DETAILS\n\nMax. cutting length: 3,000 mm\nCutting width at rip fence: 1,300 mm\nSaw blade diameter: 450 mm\nTable length: 840 mm\n\nMACHINE DETAILS\n\nMotor power: 5.5 kW\n\nFEATURES\nInfinitely variable speed control\nScoring unit\n2-axis scoring unit with tilting function\nRAPIDO for single-sided 2-axis scoring unit\nLED illumination on scoring unit\nDouble roller carriage, 3,000 mm length\nAngle stop 90° – 3,200 mm\nCNC rip fence\nSTEG/second support on double roller carriage\nLASER cut line indicator Iedjxc Ub Sepfx Ab Isa

Condition: reconditioned (used), Year of construction: 1986, cutting length (max.): 2,800 mm, cutting width (max.): 800 mm, cutting width at rip fence: 800 mm, main saw diameter: 450 mm, M.-No. 86-1-224, year built 1986, connected load 380V 5.5kW, trimming carriage length 2800 mm, cutting width 800 mm, hydraulic height and tilt adjustment, scoring unit, star-delta switch, parallelogram safety device with narrow and wide hood, angle stop, mitre stop, parallel fence, table extension 800 x 400 mm Iedowrb U Tspfx Ab Isa

Condition: reconditioned (used), Year of construction: 2020, functionality: fully functional, machine/vehicle number: 20-11-14-902, cutting length (max.): 3,200 mm, cutting width (max.): 1,000 mm, saw blade diameter: 450 mm, table length: 840 mm, Equipment: rotational speed infinitely variable, Manufacturer-refurbished Altendorf F45 with ElmoDrive control & Digit L display! TECHNICAL DETAILS Maximum cutting length: 3,200 mm Maximum cutting width: 1,000 mm Saw blade diameter: 450 mm Table length: 840 mm Saw blade projection 90° single-sided tilt: 154 mm 90° dual-sided tilt: 154 mm +45° single-sided tilt: 105 mm +45° dual-sided tilt: 105 mm -45° dual-sided tilt: 78 mm MACHINE DETAILS Power: 5 kW Dust extraction connection Upper extraction: Ø = 80 mm Isdpfjxc T Tmsx Ab Ija Lower extraction: Ø = 120 mm Suction pressure: 1,200 Pa at total extraction port, Ø = 140 mm Airflow: v_min = 1,110 m³/h at 20 m/s Air cushion table Compressed air consumption: 200 l/min at 1 bar (max. 400 l/min at max. 3 bar) EQUIPMENT Continuously variable speed Dual-sided tilting Scorer preparation Template holder Digit - L PA 1,000 mm - CNC Front support roller

Condition: excellent (used), CATALOG NUMBER 7644 Technical Data: - Max main blade diameter with scoring unit: 350 mm - Max main blade diameter without scoring unit: 450 mm - Cutting height with mounted blade: 100 mm - Main blade adjustable hydraulically: up/down + angle - Electric angle display - Electric height and lateral adjustment of scoring unit - Spindle diameter: 30 mm - Spindle locking - With sliding table - Cutting length on sliding table: 2800 mm - Cutting width at fence: 1440 mm - With side carriage - With scoring unit - Max diameter of scoring blade: 120 mm - Scoring unit spindle diameter: 22 mm - Scoring unit motor: 0.75 kW - Main motor: 5.5 kW - 4 spindle rotation speeds - Electronic speed display - Extraction port diameters: 120 mm, 80 mm - Table dimensions: 1220 x 730 mm - Table dimensions with extension: 1230 mm - Table dimensions with extension: 2070 mm - Saw blade guard - Dimensions (L/W/H): 2940 x 3400 x 1420 mm Iodpfx Abjwgdh So Isa - Weight: 1100 kg ADVANTAGES – German-made – With scoring unit – Not repainted – Used saw, in very good condition Net price: 29,900 PLN Net price: 7,120 EUR Net price calculated at an exchange rate of 4.2 PLN/EUR (In case of significant exchange rate changes, the price may change)

Condition: used, Year of construction: 2015, Carriage length: 4300 mm Cutting width at rip fence: 1350 mm Cutting width at crosscut fence: 3200 mm Cutting depth: 200 mm Scoring unit: no Saw blade height adjustment: electric Saw blade tilt adjustment: electric Rip fence adjustment: manual Crosscut fence adjustment: manual Saw blade angle display: digital readout Cutting height display: digital readout Rip fence display: scale Crosscut ruler display: scale Isdsxzfwzopfx Ab Isa Saw blade diameter: 550 mm Speeds: 2 Motor power: 11 kW Extraction connection: 80 and 120 mm Machine length: 4500 mm Machine width: 2200 mm Weight: 1200 kg

Condition: good (used), Year of construction: 1989, Sawblade tiltable . ° cutting width .. mm Motor output . kW Ijdoxzuy Sopfx Ab Ija serial number .

Condition: ready for operation (used), Year of construction: 2005, functionality: fully functional, cutting length (max.): 3,300 mm, cutting width at rip fence: 1,650 mm, Equipment: scorer, Top of the line precision tablesaw with fully digital rip fence and crosscut fence. Packaged and ready for shipping! Ijdjxz Dl Repfx Ab Iea

Condition: like new (used), Year of construction: 2020, functionality: fully functional, cutting width at rip fence: 1,300 mm, height adjustment type: electric, slide length: 3,000 mm, Equipment: motor brake, rotational speed infinitely variable, scorer, Used machine – Excellent condition / As new Model: F45 ElmoDrive Year of manufacture: 2020 ⭐ HIGHLIGHTS: ++ Large ElmoDrive control panel – Eye-level operation Intuitive, highly precise and user-friendly control via the large ElmoDrive operating panel. Ideal for rapid changeovers, high repeat accuracy, and maximum operator convenience. ++ Dual-sided saw blade tilting (+/- 46°) Delivers maximum flexibility for precise mitre and angle cuts. Isdpfxoxz Dazs Ab Ija ++ CNC rip fence 1300 mm: Fully automatic, precise, and repeatable – perfect for efficient, professional operation. ++ 2-axis scoring unit (tiltable on both sides) For chip-free results on coated panels and premium materials. ++ VARIO main motor (5.0 kW) – Continuously variable speed Optimal cut quality for any material thanks to flexible and smooth speed control. Equipment & technical data: + Max. saw blade diameter 450 mm + RAPIDO scoring system + Table extension 840 mm + Double roller carriage 3000 mm + Mitre/angle fence + Machine height 910 mm Sales price ➡️ €29,990 net / Original price approx. €50,000 Condition & delivery + Machine was completely overhauled by Altendorf + Very well maintained and fully functional condition + Delivery available by arrangement Location: Hopert & Klinzmann Holzbearbeitungsmaschinen GmbH Gerikestr. 91 39340 Haldensleben

Condition: good (used), Year of construction: 2003, Tilting table saw Altendorf F45 with ELMO IV-plus package, 2-axis scoring unit, 3m sliding table and Control-Plus control system Sliding table length: 3000mm Saw blade tilt from 0 to 45 degrees Speeds: 3000, 4000, 5000, and 6000 rpm with electronic speed display Main drive motor: 5.5kW with automatic motor brake Operator panel at eye level with Control-Plus control 4-axis CNC controlled Cutting of chain dimensions and grooves at both rip fence and crosscut fence Cut width compensation at rip and crosscut fence with tilted blade 600 cutting programs Calculator function with result transfer to the corresponding axis Tool management Saw blade diameter up to 450mm Max. cutting height: 150mm Cutting width up to 1040mm, electrically adjustable Tilting angle and height adjustment electrically adjustable Crosscut fence up to approx. 3210mm, electrically adjustable, automatic coupling of the second stop flap for large cutting widths Rip fence fold-down Extraction nozzles: 120 + 80mm Sliding carriage lockable Additional angle stop fence 2 used saw blades and one scorer included 2 riving knives 2-axis scorer unit, electrically adjustable while the machine is running 2 protective hoods Ijdpfjxw Ii Ssx Ab Ioa 3 emergency stop switches Clipboard at control panel CE mark Machine shows signs of use. No cuts in the sliding table. Original paint (custom paint), touched up in some areas. Machine has 18,985 operating hours. It comes from a furniture factory and was clearly regularly serviced and well maintained. Condition as per original photos. A video of the machine in operation can be sent upon request. Dimensions approx. 3150 x 3750 x 1900mm (LxWxH). Weight approx. 1400kg. The machine can be demonstrated on site by appointment. We only offer machines that are ready for demonstration in our warehouse, see “more offers from this supplier.”

Condition: used, Year of construction: 1990, Carriage length: 3800 mm Cutting width at rip fence: 600 mm Cutting width at crosscut fence: 2800 mm Cutting depth: 150 mm Scoring unit: yes Saw blade height adjustment: manual / hydraulic Saw blade tilt adjustment: manual / hydraulic Rip fence adjustment: manual Saw blade angle display: scale Cutting height display: - Rip fence display: scale Crosscut fence display: scale Saw blade diameter: 450 mm Speeds: 4 Motor power: 7.5 kW Motor brake: yes Extraction connection: 80 mm and 120 mm Machine length: 3870 mm Iodpfxjtk H Tns Ab Ija Machine width: 1200 mm Weight: 1000 kg

Condition: good (used), Year of construction: 1986, Sawblade tiltable . ° Ijdpfx Aboxzuy Ee Ija cutting width . mm Motor output . kW

Condition: excellent (used), Year of construction: 2019, Equipment: motor brake, Altendorf F45 EvoDrive 2019 – CNC – 3000 mm – Excellent Condition Isdpfx Abjxzhpao Ija For sale is an Altendorf F45 EvoDrive, year of manufacture 2019, in excellent condition. The machine comes from a particleboard plant and was used in quality control for sample cuts. The saw has been serviced regularly. The machine is immediately ready for operation. Equipment: + EvoDrive control system + Eye-level control panel + 5.5 kW VARIO motor (variable speed) + Double roller carriage 3000 mm + CNC rip fence 1000 mm + CNC angle fence UNO 90 + Table extension 840 mm + Machine height 910 mm + Saw spindle diameter 30 mm + 400 V / 50 Hz Condition: + Very good technical and visual condition Scope of delivery: + Altendorf F45 EvoDrive + 3000 mm double roller carriage + CNC rip fence + CNC angle fence + Table extension 840 mm + Operating manual & inspection documents + Large and small extraction hoods Price: Negotiable €22,500 net (current new price over €40,000 net) Location: - Haldensleben - Transport can be arranged. - Viewing by appointment possible.