Sliding table saw

Altendorf F45

Condition: new, Altendorf F 45 EvoDrive – new Exhibition machine, special price - Electrically powered height and swivel adjustment 0 – 46° for the - Control panel at eye level, swiveling - Machine height 91 cm - Template holder, directly on the control panel - Extended cutting height through swivel adjustment, max. blade diameter 550 mm - Motor 5.5 kW (7.5 hp) VARIO Bsdpfszymbljx Abtswt - Preparation for a 2-axis scoring saw - Table extension 840 mm - Double roller carriage with carriage length 3200 mm - Miter stop - CNC parallel fence 1300 mm - Front support roller Duplex is not included in the price but can be purchased at a favorable price.

Condition: new, table length 2000 mm table width 1000 mm stroke height 400 - 1010 mm weight max. in kg 300 kg weight of the machine ca. 220 kg Bwodpfx Asv Htkdjbtet

Condition: new, Year of construction: 2025, Sawblade tiltable 0-46 ° Length of the rolling table 3200 mm cutting width 1000 mm Motor output 5,5 kW Cutting height 179 mm Cutting height at 45° 123 mm Saw blade diameter 500 mm Speed 3/4/5000 U/min. weight of the machine ca. 1300 kg Bodpfx Abozycp Estowt

Condition: used, Year of construction: 1994, Machine length: 2800 mm Length stop: Fixed, 90° Duplex cutting system Cutting width: 1300 mm with manual adjustment 7.5 kW Bodpfjzh Hwcox Abtewt No pre-scoring device Location: Nattheim

Condition: used, Year of construction: 2000, With electric height and tilt adjustment Used, excellent condition, little used Make Altendorf Type F45 Year of manufacture 2000 Machine number GS-tested Motor 4 kW Steel guides Carriage length approx. 3000 mm Cutting width approx. 1050 mm Pivoting up to 45° Prepared for scoring unit Parallelogram guard Bsdpsvxlq Hjfx Abtswt Tabletop extension Anodized aluminum parts Electric height adjustment Electric tilt adjustment Digital display: - Cutting angle - Speed Extraction connection D 120/80 mm Space required approx. 3010 mm x 1800 mm x 1500 mm Weight approx. 1000 kg Storage location 97447 Gerolzhofen, free on load, unpacked Sold in the current condition as seen, without warranty or guarantee

Condition: excellent (used), Altendorf F45 ProDrive panel saw 300cm carriage, 0-45 degree tilt, and motor-driven blade height adjustment, right-hand rip fence with manual adjustment and electronic display, cutting width 1350mm 0.75KW scoring saw, 2-axis, electrically adjustable With parking function LED lighting during scoring saw operation 5.5KW main motor; 3 cutting speeds max. blade diameter 450mm, Left-hand rip fence on the carriage with angle adjustment Laser line indicator Bedezypxmopfx Abtewt Very good condition

Condition: used, Year of construction: 1985, Altendorf panel saw F 45, Year of manufacture: 1985 Bsdpfxszx R N Do Abtewt Machine number: 85-4-122 Motor: 5.5 kW / 400 Volt Scoring unit: 0.75 kW Cutting length: 2800 mm Cutting width: 1250 mm Raising/lowering and tilting up to 45° via handwheel Spindle speeds: 3, 4, 5 and 6000 rpm Max. saw blade diameter: 400 mm Max. cutting height: 130 mm Parallel fence Table extension: 800 mm Miter gauge

Condition: good (used), Code: 0461 Brand: ALTENDORF Model: F 45 III - CE Standard CNC-controlled 3-axis panel saw with tilting blade for furniture, custom-made furnishings, panels, doors, wooden window frames, plastics, composite materials and various - CE Standard Bwodpfx Aszp Dx Hobtet Technical data: Precise sliding double roller carriage Aluminium carriage length 3200 mm Max blade diameter 450 mm - (without scoring unit mm 550 ) Max cutting height 150 mm - (without scoring unit height mm 200) Cutting height at 45° 105 mm - (without scoring unit height mm 141) Scoring unit blade diameter 120 mm 3 controlled axis (lifting/blade tilting/parallel guide) Electric motor adjustment 2-axis scoring unit Control panel at operator height with colour LCD screen Anodised aluminium table extension 840 mm Parallelogram blade guard Register for oblique square cuts, manual adjustment, with length compensation, end cutting up to 3500 mm Blade locking system Work table height 910 mm Motor power Hp 7,5 USB Port Diagnostics Overall dimensions of assembled machine mm 3400 x 3600 x 1800 h Overall dimensions for transport mm 3400 x 2100 x 1800 h Weight kg 1050

Condition: new, ALTENDORF Model F45 Pro Drive Offer type: New machine, FOR SALE ONLY IN AUSTRIA! Immediately available new machine with promotional price and full manufacturer's warranty. Pro Drive control: 3.5" color display with separate keyboard Automatic dimension correction on the parallel and miter fence when the saw head is swiveled Easy axis calibration Machine diagnostics, operating hour counter, USB interface Recall of the last dimension input (back function) 99 storable cutting programs Bedpfxoiz Aufo Abtswt Grooving: with automatic step-by-step positioning of the parallel fence 400V / 50Hz - Europe, scale: scale in mm Electromotive height and swivel adjustment 0 – 46° for the main saw blade with automatic correction of the cutting height when the saw head is swiveled Machine height 910 mm (standard equipment) The control panel of the F 45 is mounted at eye level. This allows all axes to be easily controlled, and all settings are within view. The one-hand operation of the outfeed device is easily accessible from the working position in front of the machine. Another advantage: nothing stands in your way on the smooth machine front. INCLUDES OPTIONS: M62003 Template holder M64080 Extended cutting height with saw blade projection of max. 204 mm. M51101 Single-sided swiveling saw head with 7.5 kW (10 HP) motor M24030 2-axis scoring unit with electromotive height and side adjustment M24037 LED lighting for the danger area of the scoring unit M41010 Table extension 840 mm M34204 Double roller carriage, carriage length 3200 mm M44404 Miter fence, cutting length up to 3500 m. M44443 CNC parallel fence, cutting width 1300 mm. M44450 Front support roller. M37003 On/off switch on the double roller carriage Note on used machines: • Subject to errors in technical data and prior sale. • Indicated prices are ex works, pickup only - free loading! • The machine has been cleaned and function-tested. • All machines are sold as is, as viewed, without any warranty claims. • The buyer is free to inspect the machines at the location. • Special agreements are only possible in written form. (We only answer inquiries if you provide your address + telephone number!)

Condition: used, Altendorf F45 panel saw, Bwsdpfozg Uw Iex Abtet Main motor: 5.5 kW, Scoring saw motor: 0.75 kW, Carriage length: 300 cm, Tilt: 0-45 degrees, motor-driven adjustment, Blade height adjustment: motor-driven, Max. blade diameter: 350 mm, Cutting width on the right side: 1040 mm.

Condition: new, Year of construction: 2024, machine/vehicle number: Werksüberarbeitungsnummer: WÜAF25T68109, functionality: fully functional, power: 4 kW (5.44 HP), cutting width (max.): 1,000 mm, saw blade diameter: 315 mm, cutting length (max.): 3,200 mm, F25 basic equipment - Manual height and tilt adjustment 0–46° of the saw blade, with digital display - Drive power 4 kW (5.5 HP) at one speed, 4,200 rpm - Double roller carriage, carriage length 3,200 mm - Angle mitre fence, cross cuts up to 3,450 mm - Saw blade diameter max. 315 mm, saw blade projection max. 104 mm - Cutting height 100 mm, 70 mm at 45° - Machine height 880 mm Equipment package type 6 Bwsdpewwv Rmjfx Abtjt - 5.5 kW (7.5 HP), 2 speeds - Parallel fence, 1,000 mm - Riving knife with extraction - Preparation for scoring unit

Condition: excellent (used), 5.5 kW motor Table length: 300 cm Scoring unit: 0.75 kW motor Ground clearance: 160 cm Bodpfx Aezxfbuebtswt Electrically adjustable blade, scoring unit, and base frame. New blades.

Condition: excellent (used), Altendorf F45 ElmoDrive panel saw Extensive equipment 320cm sliding table, Bjdozxc D Hjpfx Abtewt Two-way tilting (+46 to -46 degrees) with motorized adjustment, Motorized up-and-down adjustment of the saw blade, Right-hand rip fence with motorized adjustment up to 1370mm, 2-axis scoring saw with electric adjustment 5.5KW main motor, speed controlled by a frequency inverter, Max. blade diameter 450mm, Electronic display on the rip fence and sliding table, DIGIT-L Year of manufacture: 2023 Very good condition, barely differs from a new machine.

Condition: new, Year of construction: 2026, PREMIUM VERSION MODELS ARE CHARACTERIZED BY HIGH RIGIDITY AND MAXIMUM RESOLUTION PRECISION, WORKING IN FULL INTERPOLATION IN EACH X, Y, Z AXIS. High-class CNC milling machine designed for the subtractive processing of materials, due to the whole range of configurations, it is used in many industries: industrial, electronics, welding, carpentry, advertising, etc. These are efficient and precise machines equipped with user-friendly CNC control systems. The price quoted is for the machine itself, excluding additional equipment, installation, transport and training. Design Welded steel rigid construction, The gate arms are made of hardened, thick, powder-coated sheet metal, which has increased stiffness, which translates into the quality of the processed detail. Work table The work table is made using hybrid technology, It has T-slots enabling manual clamping of material with dimensions of 2010 x 3010mm, Dissection table with four independent vacuum sections. Drive SERVO motors used to drive high-power machine tools provide appropriate acceleration and speed in individual directions, The X and Y axes are equipped with high-quality toothed bars, praised by users, which ensure high durability and precision, The Z axis is driven by a high quality ball screw. All axles move on rail guides. The machine is equipped with a tool height sensor, Bsdeiz S Haopfx Abtowt Linear bearings: trapezoidal rails, Hiwin carriages. Spindle The spindle design uses high-quality machine bearings, which are characterized by very quiet operation and guarantee increased durability. Tool height measurement sensor - included. The spindle speed range is from 4,500 to 18,000 rpm. Tool clamping using ER32 collets Software OPTIONALLY The latest UCanCAM V12 software in Polish language version (the software provides the ability to import files from Corel, Autocad, etc. File import/export, text editor and input and many other functions) The software enables quick and easy design of elements, which the program then converts to so-called G-code. It is also possible to import ready files from other programs. The machine is equipped with a function of remembering the last G-code path (In the event of a failure or power outage, it starts working from the last point without losing time or material.) DSP control Digital Signal Processing - digital signal processing. The machine's DSP controller has its own processor and RAM, which ensures failure-free operation and simple operation of the machine. The controller ensures smooth operation of the device and accuracy during processing. There is no need to reinitialize the program after a power loss. The memory built into the controller allows the machine to operate without having to load the program each time. We offer machine tools with real CE EU DTR - certified by the best in the EU. Technical parameters Spindle 5.5kW / 18000rpm inverter, air cooled Work area 2150x3200mm Maximum spindle height 350mm Control DSP Program resolution 0.001mm Software UCanCAM V12 in Polish language version(optional) Power supply 400V Libra 1450 kg Machine dimensions 2680x3600x2200mm Table height 715mm Vacuum pump 7.5 kW (optional) Underpressure 440 mbar Guides linear Drivetrain toothed rack (Z axis - ball screw) Axle drives hybrid servo drives

Condition: good (used), Year of construction: 2010, Sawblade tiltable 46 ° Length of the rolling table 3000 mm cutting width 1300 mm Bwodpfx Abjzu Tlaotot Motor output 5,5 kW Cutting height 204 mm Saw blade diameter 550 mm Speed 2000-6000 U/min. weight of the machine ca. 1300 kg