Used Altendorf F45 Edition 500 for sale (104)

Condition: used, Panel saw ALTENDORF F45 - used - double roller carriage, tilting, parallel fence with fine adjustment, outrigger table, table extension, anodized aluminium, Tjdpfx Aew Nv I Ujired table width extension, anodized aluminium, mitre fence, overhead guard, narrow and wide ----- Technical specifications ----- Tilting range: 45°, Carriage length: 2,500 mm, Cutting width: 800 mm, Max. saw blade Ø: 450 mm, Motor power: 5.5 kW, Extraction nozzle Ø: 80 / 120 mm

Condition: used, Altendorf F45 panel saw 320 cm carriage, Tedey T Eutspfx Airjd blade tilt and height adjustment via hydraulic system, rip fence on the right side, manually adjustable up to 1350 mm, scoring saw, 0.75 kW, 5.5 kW motor, max. blade diameter 450 mm.

Condition: excellent (used), Altendorf F45 elmo panel saw 280 cm sliding table, cuts full-size panels Duplex mitre guide included Blade tilt and height electrically adjustable Right-hand fence motorized, adjustable up to 1340 mm 2-axis scorer, electrically adjustable Tedjyq E Iyepfx Airjd 5.5 kW motor 4 cutting speeds adjustable via belt Max. blade diameter 350 mm Used machine in very good condition

Condition: reconditioned (used), Year of construction: 2023, machine/vehicle number: GM010.0396, functionality: fully functional, power: 5.5 kW (7.48 HP), cutting width (max.): 1,300 mm, saw blade diameter: 550 mm, cutting length (max.): 3,200 mm, table length: 840 mm, Factory-refurbished Altendorf F45 with ProDrive control system! TECHNICAL DETAILS Cutting Data Cutting length: max. 3,200 mm Cutting width at rip fence: 1,300 mm Saw blade diameter: 550 mm Saw blade projection at 90°: 204 mm Saw blade projection at +45°: 141 mm Carriage length, double roller carriage: 3,200 mm Table Data Table length: 840 mm Performance Data Power output: 5.5 kW MACHINE DETAILS Tsdpfxoxc Uq Hs Airsd Machine height: 910 mm Motor power: 5.5 kW (7.5 HP) Dust Extraction Connection Extraction, top: Ø = 80 mm Extraction, bottom: Ø = 120 mm Negative pressure: 1,200 Pa at total suction port, Ø = 140 mm Air consumption: v_min = 1,110 m³/h at 20 m/s Air Cushion Table Compressed air consumption: 200 l/min at 1 bar (max. 400 l/min at max. 3 bar) EQUIPMENT Lighting Continuously variable speed control Scorer unit LED lighting 3-axis scorer including park position On/off switch on the double roller carriage Angle/miter fence Parallel stop DIGIT X 1,300 mm Front support roller Second support on the double roller carriage

Condition: used, Year of construction: 1993, machine/vehicle number: 93-11-247, functionality: fully functional, input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, tilt adjustment saw blade: 45 °, height adjustment type: mechanical, rotational speed (max.): 4,000 rpm, Fully functional machine from a plastics/wood processing company. In good condition. Machine is available from calendar week 50/2026. Todpfx Aiez Ngt Sjred

Condition: ready for operation (used), Year of construction: 2005, functionality: fully functional, cutting length (max.): 3,300 mm, cutting width at rip fence: 1,650 mm, Equipment: scorer, Top of the line precision tablesaw with fully digital rip fence and crosscut fence. Todpfxexz Dl Rs Airod Packaged and ready for shipping!

Condition: new, Year of construction: 2026, power: 5.5 kW (7.48 HP), Equipment: documentation/manual, saw blade guard, scorer, For sale is a new Altendorf F45 ProDrive with extensive features. Features: +ProDrive control with a 3.5" color display +Ergonomic operation at eye level +5.5 kW main motor +Speeds: 3,000 / 4,000 / 5,000 rpm +Saw blade diameter up to 450 mm +Cutting height up to 154 mm +Double roller carriage with 3,000 mm carriage length +CNC parallel fence with 1,300 mm cutting width +2-axis scoring unit with electric height and side adjustment +Angle mitre fence DIGIT L up to 3,200 mm +DUPLEX mitre fence up to 1,350 mm (additional cost of €1200 net) +Table extension 840 mm +99 storable cutting programs +USB interface and operating hour counter +Automatic dimension correction when the saw blade is pivoted +Machine height 910 mm +400 V / 50 Hz Other models or different equipment variants available upon request. Inspection possible by appointment. Invoice with VAT stated. Tsdpfx Aijz Ey Elerod Transport can be arranged upon request.

Condition: used, Year of construction: 1981, Altendorf F 45 panel saw, Year of manufacture: 1981 Machine number: 81-5-37 Motor: 5.5 kW / 400 volts Scoring unit: 0.75 kW Cutting length: 2800 mm Cutting width: 1000 mm Raising/lowering and tilting up to 45° via handwheel Spindle speeds: 3, 4, 5 and 6,000 rpm Max. saw blade diameter: 400 mm Tsdpfszm S S Nsx Aired Max. cutting height: 130 mm Parallel fence Miter gauge

Condition: used, Year of construction: 2004, Sliding carriage length: 3000 mm Cutting width at rip fence: 1350 mm Cutting width at crosscut fence: 3200 mm Todpsyl Tihjfx Aired Cutting depth: 170 mm Scoring unit: no Saw blade height adjustment: electric Saw blade tilting adjustment: electric Rip fence adjustment: manual Crosscut fence adjustment: manual Saw blade angle display: digital readout Cutting height display: digital readout Rip fence display: digital readout Crosscut ruler display: scale Saw blade diameter: 500 mm Spindle speeds: 4 Motor power: 7.5 kW Extraction port: 80 and 120 mm Machine length: 3600 mm Machine width: 2200 mm Weight: 1200 kg

Condition: used, Year of construction: 1996, Sliding carriage length: 3200 mm Cutting width at rip fence: 1300 mm Cutting width at crosscut fence: 3200 mm Cutting depth: 145 mm Scoring unit: no Saw blade height adjustment: electric Saw blade tilt adjustment: electric Tjdpeyq Rz Sjfx Aired Rip fence adjustment: electric Crosscut fence adjustment: manual Saw blade angle display: digital readout Cutting height display: - Rip fence display: digital readout Crosscut rule display: scale Saw blade diameter: 450 mm Speeds: 4 Motor power: 5.5 kW Extraction connection: 80 and 120 mm Machine length: 4000 mm Machine width: 2200 mm Weight: 1200 kg

Condition: used, Year of construction: 2006, Carriage length: 3400 mm Cutting width at rip fence: 1350 mm Cutting width at crosscut fence: 3200 mm Cutting depth: 170 mm Scoring unit: yes Saw blade height adjustment: electric Saw blade tilting adjustment: electric Rip fence adjustment: manual Crosscut fence adjustment: manual Saw blade angle display: digital readout Cutting height display: digital readout Rip fence display: digital readout Crosscut fence scale: analog scale Saw blade diameter: 500 mm Number of speeds: 4 Motor power: 5.5 kW Todpfx Aoyhgiteired Extraction port: 80 and 120 mm Machine length: 3600 mm Machine width: 2200 mm Weight: 1200 kg

Condition: used, Year of construction: 2023, machine/vehicle number: Werksüberarbeitungsnummer: WÜA23051204239033, functionality: fully functional, power: 5 kW (6.80 HP), cutting width at rip fence: 1,300 mm, main saw diameter: 550 mm, section length (max.): 3,200 mm, table length: 840 mm, F45 Elmo Drive GM010.0407 Machine height: 910 mm Tjdpfx Aoymdh Djirod Eye-level control panel Double-sided tilting Max. blade diameter: 550 mm Motor: 5.0 kW (6.8 HP) Vario 2-axis scoring unit with double-sided tilt LED lighting Table extension: 840 mm Double roller carriage: 3200 mm Mitre/fence stop DIGIT LD CNC parallel fence: 1300 mm Front support roller DUPLEX 1350 mm (2019)

Condition: used, Year of construction: 1992, Sawblade tiltable 45 ° Length of the rolling table 3800 mm cutting width ca. 1250 mm Motor output 7,5 kW Tsdpfx Aswrtk Tjirod

Condition: excellent (used), 5.5 kW motor Table length: 300 cm Scoring unit: 0.75 kW motor Ground clearance: 160 cm Electrically adjustable blade, scoring unit, and base frame. Tedozxfbuspfx Airjd New blades.

Condition: ready for operation (used), Year of construction: 2023, machine/vehicle number: 23-07-12-045, functionality: fully functional, power: 7.5 kW (10.20 HP), saw blade diameter: 550 mm, table height: 910 mm, cutting width at rip fence: 1,000 mm, The machine is in very good condition with minimal signs of use! The machine was used for processing aluminum. TECHNICAL DETAILS Maximum blade diameter: 550 mm Cutting width at CNC parallel fence: 1,000 mm MACHINE DETAILS Tjdpoytpxnjfx Aired Machine height: 910 mm Motor power: 7.5 kW EQUIPMENT Table extension: (length: 840 mm) Double roller carriage (length: 3,000 mm) 2 pneumatic quick clamps (application range: 0–90 mm) Eye-level control panel Template holder directly at the control unit Increased cutting height including saw blade tilting TIP-SERVO DRIVE CNC angle fence UNO 90 Additional cross slide incl. connection Front support roller Air cushion table Spray device Note: The machine comes from a business liquidation, has been professionally dismantled and placed in storage.

Condition: used, Year of construction: 1984, power: 5.5 kW (7.48 HP), cutting height (max.): 150 mm, cutting width (max.): 1,200 mm, saw blade diameter: 450 mm, tilt adjustment saw blade: 45 °, height adjustment type: hydraulic, saw blade bore: 30 mm, actuation type: hydraulic, overall weight: 1,200 kg, Equipment: saw blade guard, scorer, Cutting length / carriage length 2800 mm Cutting length according to scale 2850 mm Cutting width at parallel fence 1200 mm, manual adjustment Drive motor 5.5 kW, 400 V, 50 Hz Saw blade speed 3/4/5/6000 rpm Max. tool diameter 450 mm Cutting height at 90° = 0-150 mm Cutting height at 45° = 0-107 mm Saw blade swivel with optical angle indicator Tsdpfx Aisz At Rlored Speed indicator with optical display Hydraulic height and swivel adjustment via foot pedal Parallel parallelogram guard with narrow and wide guard Dust extraction connection on top 80 mm, dust extraction connection on bottom 120 mm Scoring unit

Condition: used, Year of construction: 2024, New machine – special price – year of manufacture 2024. HAND GUARD Edition Single Flex, unit. Image included. The HAND GUARD system is based on the early detection of a hazardous situation and thus protects the user from injuries. It functions in every camera-based system and initially warns the user visually to indicate an impending danger. If the danger persists, the saw blade is lowered without damaging the machine or the material. HAND GUARD supports the processing of various materials, such as wood, metal, and plastic. • Contactless and injury-free • Quick start-up • 100% damage-free • Works with concealed cuts • Does not need to be deactivated, permanent function • Max. 500 mm saw blade diameter, fully retractable under a single-sided pivoting saw unit. Pivoting range: 0 - 46°, equipped with a quick-change system for the main saw blade. Motorized height and pivoting adjustment and a maximum saw blade overhang of 179 mm. (Partial installation of the scoring unit required). In addition, there is the control unit at eye level, with which you can adjust the height and pivoting of the saw blade, plus, depending on the choice of the control package, the speed and other functions. The new, clear industrial design marks the exceptional position of the Altendorf brand: In this panel saw, distinctive design meets timeless aesthetics. The Altendorf double carriage is famous for its smooth running and precise movement. It can be locked steplessly at any position. The large double rollers keep the upper carriage in absolute connection with the lower carriage in the respective guide rods. This running quality is maintained even under decades of stress and contamination. The carriage construction is designed as an extremely torsion-resistant and dimensionally stable multi-chamber system. In addition, there is a front support roller with a width of 300 mm, which provides helpful support when cutting long workpieces on the parallel fence. Positionable 90° under the double carriage. 12" touchscreen with integrated keyboard • Automatic dimension correction on the parallel and mitre fence when pivoting the saw unit • Stepless fine adjustment of the axes via +/# buttons • Easy calibration of the axis • Machine diagnostics, operating hour counter, USB interface Tjdpfx Asyyap Eoired • Calling up the last dimension input (back function) • Conversion from peak to butt dimension on the parallel and mitre fence • Shift-cut function with automatic determination of missing angles or dimensions • Extended tool management for max. 100 storable tools • Storage of the scoring position (3-axis scoring unit) • Storage of the thickness and cutting width of the main tool • Storage of the speed of the main tool Additional functions: • Grooving: with automatic step-by-step positioning of the parallel fence • Chain dimension function: cutting sequences with the same distance on the parallel fence • Miter cut with allowance • Calculator function with result transfer to the axes • Geometric shapes, determination of missing angles or dimensions • Bevel cuts, determination of missing angles or dimensions • 9999 storable cutting programs • Standard preparation for remote maintenance • Template holder directly next to the touchscreen Accessories included in the Edition Single Flex: • Double carriage with a carriage length of 3000 mm • Vario drive 5.5 kW (7.5 hp) VAR

Condition: good (used), Year of construction: 1990, functionality: fully functional, Circular saw Altendorf F 45 Tsdpfx Ajr Eq Spsired Year of construction 1990 Manufacture: Altendorf Germany carriage length: 3200 mm Manual height and angle adjustment rip fence 1250 Scoring unit 0.75 kW Motor power: 5, 5kW 4 speeds 3/4/5/6000 rpm, blade diameter max mm: 450 with scorer 350mm Upper intake guard Altendorf Automatic motor brake Weight approx. 1200 kg Technical data subject to change

Condition: excellent (used), Year of construction: 2000, Sawblade tiltable +/- 45 ° Length of the rolling table 2800 mm cutting width 1440 mm Motor output 7,5 kW Cutting height 150 mm Saw blade diameter 450 mm weight of the machine ca. 1200 kg Tsdpfx Aexcg Hgsirod range L-W-H 3,2 x 3,4 x 1,7 mm

Condition: excellent (used), CATALOGUE NUMBER 8006 TECHNICAL DATA - max diameter of the main saw blade with scoring saw: 350mm - max diameter of the main saw blade without scoring saw: 450mm - cutting height with a 350mm blade installed: 100mm - electric adjustment of the main saw blade (up/down) + angle - electric angle display - electric adjustment of the scoring saw (up/down, left/right) - spindle diameter: 30mm - spindle locking - with a rip fence carriage - cutting length on the carriage: 3400mm - cutting width with fence: 1300mm - with a side carriage - with a scoring saw - max diameter of the scoring saw: 120mm - spindle diameter: 22mm - scoring saw motor: 0.75kW - main motor: 5.5kW - 4 types of rotation speeds - electronic speed display - diameter of the dust extraction port: 120mm, 80mm - table dimensions: 1220x730mm - table dimension with extension: 1440mm - table dimension with extension: 2060mm - blade guard - dimensions (L/W/H): 3550x3400x1500mm - weight: 1140kg ADVANTAGES Tedpfxj Af I D Ao Airod - electric adjustment of the saw blade and scoring saw - with original fence - carriage length: 3400mm - German-made - unpainted - used saw, very good condition Net price: 38900 PLN Net price: 9047 EUR, depending on the exchange rate of 4.30 EUR (Prices may vary due to fluctuations in the exchange rate)

Condition: good (used), Year of construction: 1994, functionality: fully functional, Format circular saw Altendorf F 45 Year of manufacture: 1994 S/N 94.09-172 Manufacturer: Wilhelm Altendorf GmbH & Co. KG General Information Machine type: Format circular saw Version: Without scorer Technical Data Aluminum sliding table 3000 mm Main saw blade diameter: max. 450 mm (recommended: 300–350 mm for standard work) Tsdswrfmajpfx Airjd Cutting height at 90°: up to approx. 150 mm (dependent on saw blade diameter) Cutting length (sliding table): depending on version, typically 3000 mm Cutting width at rip fence: approx. 1000 mm Main saw speed: Multi-stage – approx. 3000 / 4000 / 5000 rpm Main saw motor power: approx. 4 kW (optionally up to 5.5 kW) Saw blade tilting: 0–45° (manually adjustable) Height adjustment: manual via handwheel Equipment Massive, ball-bearing aluminum sliding carriage (precision-guided) Crosscut fence with adjustable angle stop and flip stops Robust rip fence with fine adjustment and digital display Table extension (depending on configuration) Mechanical height protection / saw blade guard Features No scorer: The machine is especially suitable for solid wood and rough cutting of panel materials. Solid industrial quality – durable solid mechanics, easy maintenance Cast iron machine table for high smoothness and precision EXTRA: Altendorf Digit X readout unit at the rip fence Weight 1,100 kg L x W x H = 3.0 m x 1.6 m x 1.5 m

Condition: reconditioned (used), Year of construction: 1990, functionality: fully functional, power: 5.5 kW (7.48 HP), saw blade diameter: 450 mm, Equipment: saw blade guard, ALTENDORF F-45 panel saw Tedpfx Aijylbd Hsrjd !Saw is fully functional! With digital display for the parallel fence Sliding table length: 2850 mm Year of manufacture: 1990 Power: 5.5 kW, motor with motor brake Saw blade: ø 450 mm Angle: 45° & 90° Operating options: Raising, lowering, tilting with handwheel Replaced wear parts: Dust extraction hood, bearings, motor brake, lower rollers, drive belt

Condition: reconditioned (used), Year of construction: 1994, functionality: fully functional, Motor power 50Hz 3~ 400V 5.5kW Sliding table 2800 mm Tedpjy Icbgjfx Aired without scoring saw Digital angle adjustment display Digital speed display Hydraulic lifting / lowering / tilting Cutting width 1005 mm Manual parallel fence LAP laser system Mitre fence (small) Saw blade diameter 250 - 450 mm

Condition: reconditioned (used), Year of construction: 1986, cutting width (max.): 800 mm, cutting length (max.): 2,800 mm, cutting width at rip fence: 800 mm, main saw diameter: 450 mm, M.-No. 86-1-224, year built 1986, connected load 380V 5.5kW, trimming carriage length 2800 mm, cutting width 800 mm, hydraulic height and tilt adjustment, scoring unit, star-delta switch, parallelogram safety device with narrow and wide hood, angle stop, mitre stop, parallel fence, table extension 800 x 400 mm Todjwrb U Tepfx Airod

Condition: ready for operation (used), Year of construction: 2018, functionality: fully functional, power: 7.5 kW (10.20 HP), saw blade diameter: 450 mm, tilt adjustment saw blade: 46 °, rotational speed (max.): 5,000 rpm, cutting width at rip fence: 1,300 mm, TECHNICAL DETAILS Saw blade diameter max.: 450 mm Cutting width at CNC parallel fence: 1,300 mm Max. speed: 5,000 rpm Infinitely variable adjustment Double roller carriage length: 3,000 mm Mitre angle stop length: 3,200 mm Digitally adjustable Tedpjy H Errofx Airod Table extension: 840 mm Pneumatic quick-clamp range: 0-90 mm 2 quick clamps MACHINE DETAILS Power: 7.5 kW EQUIPMENT CE marking Saw blade guard Double roller carriage with TIP-SERVO-DRIVE Air cushion table Spray device with remote control Front support roller 2 pneumatic quick clamps Digital mitre gauge L CNC parallel fence