Used Anfas for sale (60)

Condition: used, mileage: 72,295 km, power: 110 kW (149.56 HP), first registration: 05/2013, fuel type: diesel, empty load weight: 3,555 kg, maximum load weight: 2,445 kg, overall weight: 6,000 kg, tire size: 205/75R16C, axle configuration: 4x2, brakes: engine braking, color: orange, driver cabin: day cab, gearing type: mechanical, emission class: euro5, suspension: steel, number of seats: 3, loading space length: 2,580 mm, loading space width: 1,800 mm, loading space height: 700 mm, Equipment: ABS, additional headlights, air conditioning, cabin, crane, differential lock, low noise, onboard computer, power assisted steering, traction control, trailer coupling, Vehicle location: Bovenden. Includes: cab, double seat, rear window, electric window (left), electric window (right), air conditioning, 5-speed gearbox, ABS (anti-lock braking system), traction control (ASR), auxiliary drive, differential lock, work lights, leaf spring suspension, trailer hitch with ball head, low-noise G1 engine, lashing eyes, underbody protection, folding flaps, crane behind cab, emergency stop, grapple control, foldable, 2-point hydraulic support, 1x hydraulic extension, green environmental badge. Body: 3-sided tilting body with aluminum sideboards (400mm + 300mm) & Fassi F22A.0.21 crane. Additional hydraulic connection at the rear! Approximately 9061 operating hours! Load diagram: 1.95m - 995kg, 3.05m - 670kg, 4.25m - 480kg! Guedoy Aa Nqepfx Ahaof Loading height approx. 1000mm! ACCESSORY INFORMATION WITHOUT GUARANTEE, subject to change, prior sale and errors!

Condition: used, mileage: 1,95,310 km, power: 170 kW (231.14 HP), first registration: 12/2016, fuel type: diesel, empty load weight: 6,550 kg, maximum load weight: 3,950 kg, overall weight: 10,500 kg, tire size: 235/75R17.5, axle configuration: 4x2, wheelbase: 4,520 mm, brakes: engine braking, color: orange, driver cabin: day cab, gearing type: mechanical, emission class: euro6, suspension: steel-air, number of seats: 3, loading space length: 5,790 mm, loading space width: 2,490 mm, loading space height: 500 mm, Equipment: ABS, additional headlights, cabin, crane, cruise control, electronic stability program (ESP), immobilizer system, onboard computer, power assisted steering, traction control, trailer coupling, Vehicle location: Bovenden, Kz. House, Swing seat, Double bench seat, Electric mirror, Heated mirror, Electric window left, Electric window right, Cruise control, Switch 6, ABS (Anti-lock braking system), Traction control system (ASR), Power take-off, Frame cladding, Work lights, Rotating beacon, Storage box, Leaf-air suspension, Towing hitch air+light, Lashing eyes, U-protection, Swing flaps, Roof hatch, Crane behind house, Emergency stop, Foldable, 2-point outrigger mechan, 1x hydr. extension, green environmental sticker Gusdpfsvhk E Uox Ahaef Wheelbase: 4520 mm Body: Platform body with crane Fassi F85B.0.21 4.1t front axle, rear axle Hypoid 8.1t disc wheel 325, electronic brake system with ABS and ASR, disc brakes on front and rear axle, condensation water monitoring for compressed air system, rear axle stabilizer for extremely high loads, steel front underride guard, standard cockpit, pollen filter, PSM, high performance engine brake, pre-equipment for toll collection, daytime running lights, ESP, lane departure warning system, Active Brake Assist, power take-off MB 60-2c MPA Low N-torque. Load chart: 2m-4000kg, 2.25m-3610kg, 3.75m-2245kg, 5.55m-1535kg! ACCESSORY INFORMATION WITHOUT WARRANTY, subject to alterations, prior sale and errors excepted! - .

Condition: new, power: 350 kW (475.87 HP), fuel type: diesel, empty load weight: 16,174 kg, maximum load weight: 9,826 kg, overall weight: 26,000 kg, tire size: 315/80R22.5, axle configuration: 6x6, wheelbase: 3,900 mm, next inspection (TÜV): 01/2027, brakes: retarder, color: white, driver cabin: day cab, gearing type: automatic, emission class: euro6, suspension: steel, number of seats: 2, loading space length: 4,800 mm, loading space width: 2,420 mm, loading space height: 800 mm, Equipment: ABS, additional headlights, air conditioning, all wheel drive, cabin, central locking, crane, cruise control, differential lock, fog lights, navigation system, onboard computer, parking heater, power assisted steering, seat heater, traction control, trailer coupling, Vehicle location: Bovenden. ClassicSpace cab, Mercedes PowerShift 3, steel body, installation house, 1x comfort seat, seat heating, rear window, electric mirrors, heated mirrors, left electric window, right electric window, air conditioning, sun visor, cruise control, navigation system, ABS (anti-lock braking system), traction control (ASR), retarder, PTO, differential lock, fog lights, beacon, storage box, leaf suspension, trailer coupling with air, light, and hydraulics, lashing eyes, underrun protection, swinging tailgates, roof hatch, crane mounted behind house, emergency stop, grab control, foldable, 2-point hydraulic stabilizers, radio remote control, four hydraulic extensions, green environmental badge. Gedjycgqaopfx Ahasuf Wheelbase: 3900 mm Superstructure: 3-way tipper body with pneumatic flap opening, drop sides/rear flap & crane F255A.2.24 xe-dynamic, remote control. 9t front axle, rear axle planetary gear 13.4t, differential lock on front and rear axles, electronic brake system with ABS and ASR, switchable ABS, drum brakes front and rear, condensate monitoring for compressed air system, additional electronic parking brake on front axle, secondary water retarder, front axle stabilizer, reinforced stabilizer on second rear axle, residual heat utilization, construction site filter, seatbelt monitoring, smoker package, auxiliary hot water heater, PSM 2nd generation, reversing warning system, ClassicSpace, light and rain sensor, comfort central locking, off-road driving program, Mercedes PowerShift 3, PowerShift Advanced, navigation system, multimedia cockpit, preparation for toll system, daytime running lights, high-performance engine brake, MB 124-10c PTO N-/M-speed, Grounder, transmission oil cooling. Load chart: 3m – 6150kg, 4.45m – 4650kg, 6.45m – 3115kg, 8.45m – 2280kg, 10.60m – 1775kg, 12.70m – 1415kg! New stock vehicle with day registration in 01/2026! ACCESSORY INFORMATION WITHOUT GUARANTEE, subject to change, prior sale, and errors excepted!

Condition: used, mileage: 2,52,405 km, power: 130 kW (176.75 HP), first registration: 06/2011, fuel type: diesel, empty load weight: 6,140 kg, maximum load weight: 3,360 kg, overall weight: 9,500 kg, tire size: 235/75R17.5, axle configuration: 4x2, wheelbase: 3,320 mm, next inspection (TÜV): 05/2025, brakes: constant throttle, color: white, driver cabin: day cab, gearing type: mechanical, emission class: euro5, suspension: steel, number of seats: 2, loading space length: 3,800 mm, loading space width: 2,320 mm, loading space height: 600 mm, Equipment: ABS, cabin, crane, trailer coupling, Vehicle location: Bovenden, vehicle registration house, 1x air seat, rear window, electric mirror, heated mirror, electric window left, electric window right, telephone preparation, center console, switch 6, ABS (anti-lock braking system), constant throttle, rotating beacon, leaf suspension, air-light-hydr. tow bar, tow bar ball head, U-protection, roof hatch, crane behind house, grab control, foldable, 2-point hydraulic support, 2xhydr. extensions, green environmental badge Wheelbase: 3320 mm Body: Meiller 3-sided tipper with Fassi F65 crane, 2.3m-2545kg, 6.4m-930kg disc brakes on VA and HA, gearbox G 60-6/9.2-1.0, main tank 125 l, plastic, auxiliary drive NA MB 60-2c, Meiller pump, 5-piston, type 255/1, model maintenance Atego 2, engine 4.3 ltr. - 130 kW diesel (OM 904 LA), headboard height 700mm. Gsdevhnaiepfx Ahajuf The vehicle is currently approved for a gross vehicle weight of 7490 kg, but can be increased to 9500 kg at any time! Load diagram: 2.3m-2545kg, 3.5m-1725kg, 4.8m-1250kg, 6.4m-930kg. Loading height approx. 1210mm! On request with grapple and rotating head for an extra charge! ACCESSORIES WITHOUT WARRANTY, subject to alterations, prior sale and errors excepted! - .

Condition: new, mileage: 50 km, power: 375 kW (509.86 HP), fuel type: diesel, overall weight: 32,000 kg, axle configuration: > 3 axles, brakes: retarder, color: white, gearing type: automatic, emission class: euro6, loading space length: 6,200 mm, loading space width: 2,500 mm, loading space height: 600 mm, Year of construction: 2026, Equipment: ABS, air conditioning, crane, electronic stability program (ESP), navigation system, parking heater, soot filter, MAN TGS 35.510 - EURO 6, optionally with F805 incl. L436 fly jib and V20 winch!!! Tipmatic - Automatic transmission 8x4 Hydrodrive Three steered axles STEERING / LIFT axle Front support approx. 14,000 KG Flatbed body with side boards 6200x2550x600 mm Footsteps Diamond plate floor Removable side boards 9 x LED lights Overwidth markings extendable to 3500 mm width Start/Stop Rotating beacon 8 x Outrigger pockets 6 x Lashing eyes 6500daN Toolboxes Tow hitch Storage compartments Storage boxes 20 ft container locking Perforated side profile with lashing eyes 2500daN Crane: FASSI F805R.2.7, with fully hydraulic 4-point outrigger system, with 6 hydraulic extensions on the main boom, fly jib L436 with 6 hydraulic extensions, rope winch, cross-over wireless remote control V7, emergency stop, FSC II outrigger monitoring, AWC (automatic winch control), accessories complete for winch operation, tiltable sheave, quick coupler between main boom and fly jib and more... TECHNO SERIES!! NEW CRANE model Slewing range endless All hydraulic cylinders double-acting Piston rods hard chrome-plated Double knuckle system with PROLINK (over-extending knuckle arm up to 10°) Electronic overload protection system with FX800 FASSI stability control FSC-S/2 incl. LMB II Emergency shut-off, as well as optical alarm (90% and 100%) Pressure relief and load holding valves XF system (Extra Flink) + XP system (Extra Power) + FL system (Full Lift) RCH or RCS wireless remote control with linear levers and display of Pressure range (in bar and %) and 90% + 100% warning in the display Danfoss D900 control block with 4 control valves mounted on the crane pillar Emergency operation for crane control High-pressure filter is supplied pre-assembled with piping Guodpfxszcr N Io Ahajf Sep. hydraulic tank (260l) with filter and oil cooler mounted on the crane base Hydraulic outriggers, hydraulically extendable on both sides, outrigger span 10.00m, Outriggers can be operated via wireless remote control Standard color RAL 3020 traffic red - all cylinders painted black IMC - System (Integral Machine Control) and ADC (Automatic Dynamic Control) = Load-dependent speed control Load hook and attachment bridles (short/500mm) Transport position: folded transversely to the direction of travel Note: Observe the on-board voltage / 12V or 24V, standard 24V" FASSI stability control FSC-TECHNO Fassi V7S wireless maxi - 8 linear levers Proportional control block for outriggers 180° hydraulically extendable support legs / on both sides Preparation for operation with variable pump (LS) Control system for 2 additional functions with 2 hose connections / hxp-techno Additional knuckle arm (Jib) L436, 6-fold hydraulically extendable Jib Double Power (JDP) Multi-coupling with cable duct for Jib mounted for 2 functions Control system for additional function rope winch Rope winch type V20 - 2,000daN, 60m rope (12mm) with LMB and mechanical Permanently mounted rope guide when operating with additional knuckle arm (Jib) AWC - (Automatic winch Control) for crane Automatic rope winch control AWC - (Automatic winch Control) for JIB Automatic rope winch control Work lights can be operated via display or wireless remote control 1 LED work light mounted on the knuckle arm 1 LED work light mounted on the Jib LED for 2 support legs, not mounted (crane) LED for 2 support legs, not mounted (additional support struts) Electric rotary distributor with 14 slip contacts 1 zinc primer from 720RA to F820RA "Zinc primer for JIB "L42""" Additio

Condition: new, mileage: 50 km, power: 375 kW (509.86 HP), fuel type: diesel, overall weight: 32,000 kg, axle configuration: > 3 axles, brakes: retarder, color: white, gearing type: automatic, emission class: euro6, loading space length: 6,200 mm, loading space width: 2,500 mm, loading space height: 600 mm, Year of construction: 2026, Equipment: ABS, air conditioning, crane, electronic stability program (ESP), navigation system, parking heater, soot filter, MAN TGS 35.510 - EURO 6, optionally with F805 incl. L436 Fly-Jib and V20 winch!!! Tipmatik - Automatic transmission 8x4 Hydrodrive Three steered axles STEERING/LIFT axle Front outriggers approx. 14,000 KG Superstructure: flatbed with sideboards 6200x2550x600 mm Steps Diamond plate floor Removable sideboards 9 x LED lights Extendable overwidth markings up to 3500 mm width Start/Stop Rotating beacon 8 x rung pockets 6 x lashing points 6500daN Tool boxes Tow hitch Storage compartments Storage boxes 20 ft container locking Perforated side profile lashing points 2500daN Crane: FASSI F805R.2.7, with fully hydraulic 4-point outriggers, with 6 hydraulic extensions on the main boom, Fly-Jib L436 with 6 hydraulic extensions, rope winch, cross-type radio remote control V7, emergency stop, FSC II outrigger monitoring, AWC (automatic winch control), accessories complete for winch operation, swiveling sheave, quick coupling between main boom and Fly Jib and more... TECHNO SERIES!! NEW CRANE model Slewing range endless All hydraulic cylinders are double-acting Piston rods hard-chromed Double knuckle system with PROLINK (overextension of the knuckle arm up to 10°) Gusdjzcr N Uepfx Ahaof Electronic overload protection system with FX800 FASSI stability control FSC-S/2 incl. LMB II Emergency shut-off, as well as optical alarm (90% and 100%) Pressure relief and load holding valves XF system (Extra Flink) + XP system (Extra Power) + FL system (Full Lift) RCH or RCS radio remote control with linear levers and display of Pressure range (in bar and %) and 90% + 100% warning on the display Danfoss D900 control unit with 4 control valves mounted on the crane pillar Emergency operation for crane control High-pressure filter is supplied pre-plumbed Separate hydraulic tank (260l) with filter and oil cooler mounted on the crane base Hydraulic outriggers, hydraulically extendable on both sides, outrigger width 10.00m, Outriggers operable by radio Standard color RAL 3020 traffic red - all cylinders painted black IMC - System (Integral Machine Control) and ADC (Automatic Dynamic Control) = Load-dependent speed control Load hook and attachment bridles (short/500mm) Driving position: folded across the direction of travel Note: Pay attention to the on-board voltage / 12V or 24V, standard 24V" FASSI stability control FSC-TECHNO Fassi V7S radio maxi - 8 linear levers Proportional control unit » for the outriggers 180° hydraulically swiveling support legs / » on both sides Preparation for operation with variable pump » (LS) Control system for 2 additional functions with » 2 hose connections / hxp-techno Additional knuckle arm (Jib) L436, 6-fold » hydraulically extendable Jib Double Power (JDP) Multi-coupling with cable duct » for Jib mounted for 2 functions Control system for additional function » rope winch Rope winch type V20 - 2,000daN, 60m rope » (12mm) with LMB and mechanical Permanently mounted rope guide when operating with additional knuckle arm (Jib) AWC - (Automatic winch Control) for crane » Automatic rope winch control AWC - (Automatic winch Control) for JIB » Automatic rope winch control Work lights operable via display or radio 1 LED work light mounted on the knuckle arm » 1 LED work light mounted on the Jib » LED for 2 outriggers, not mounted » (crane) LED for 2 outriggers, not mounted » (additional support frame) Electrical rotary distributor with 14 » sliding contacts 1 zinc primer from 720RA to F820RA "Zinc primer for JIB ""L42""" Additional cost for Dinitrol application (

Condition: new, mileage: 50 km, power: 375 kW (509.86 HP), fuel type: diesel, overall weight: 32,000 kg, axle configuration: > 3 axles, brakes: retarder, color: white, gearing type: automatic, emission class: euro6, loading space length: 6,200 mm, loading space width: 2,500 mm, loading space height: 600 mm, Year of construction: 2026, Equipment: ABS, air conditioning, crane, electronic stability program (ESP), navigation system, parking heater, soot filter, MAN TGS 35.510 - EURO 6, optionally with F805 incl. L436 fly jib and V20 winch!!! Tipmatik - Automatic transmission 8x4 Hydrodrive Three steered axles STEERING / LIFT axle Front outriggers approx. 14,000 KG Flatbed body with sideboards 6200x2550x600 mm Step plates Diamond plate flooring Removable sideboards 9 x LED lights Overwidth markings extendable to 3500 mm width Start/Stop Rotating beacon 8 x rung pockets 6 x lashing points 6500daN Toolboxes Trailer hitch Storage compartments Storage boxes 20 ft container locking mechanism Perforated side profile lashing points 2500daN Crane: FASSI F805R.2.7, with fully hydraulic 4-point outriggers, with 6 hydraulic extensions on the main boom, fly jib L436 with 6 hydraulic extensions, rope winch, cross-type radio remote control V7, emergency stop, FSC II outrigger monitoring, AWC (automatic winch control), complete accessories for winch operation, pivoting roller, quick coupling between main boom and fly jib and more... TECHNO SERIES!! NEW crane model Slewing range endless All hydraulic cylinders double-acting Piston rods hard chrome-plated Double knuckle system with PROLINK (over-extendable knuckle arm up to 10°) Electronic overload cut-out device with FX800 FASSI stability control FSC-S/2 incl. LMB II Emergency stop, as well as optical alarm (90% and 100%) Pressure relief and load holding valves XF system (Extra Flink) + XP system (Extra Power) + FL system (Full Lift) RCH or RCS radio remote control with linear levers and display of pressure range (in bar and %) and 90% + 100% warning in the display Danfoss D900 control block with 4 control valves mounted on the crane column Emergency operation for crane control High-pressure filter is supplied pre-assembled Separate hydraulic tank (260l) with filter and oil cooler mounted on the crane base Hydraulic outriggers, hydraulically extendable on both sides, outrigger width 10.00m, Outriggers operable via radio Standard color RAL 3020 traffic red - all cylinders painted black IMC system (Integral Machine Control) and ADC (Automatic Dynamic Control) = Load-dependent speed control Load hook and attachment bridles (short/500mm) Transport position: folded transversely to the direction of travel Note: Pay attention to the on-board voltage / 12V or 24V, standard 24V" FASSI stability control FSC-TECHNO Fassi V7S radio maxi - 8 linear levers Proportional control block » for the outriggers 180° hydraulically pivotable support legs / » on both sides Preparation for operation with variable pump » (LS) Guedpezcr Nzsfx Ahasf Control system for 2 additional functions with » 2 hose lines / hxp-techno Additional knuckle arm (Jib) L436, 6-fold » hydraulically extendable Jib Double Power (JDP) Multi-coupling with cable duct » mounted for Jib for 2 functions Control system for additional function » rope winch Rope winch type V20 - 2,000daN, 60m rope » (12mm) with LMB and mechanical Permanently mounted rope guide for operation with additional knuckle arm (Jib) AWC - (Automatic winch Control) for crane » Automatic rope winch control AWC - (Automatic winch Control) for JIB » Automatic rope winch control Work lights operable via display or radio 1 LED work light mounted on the knuckle arm » 1 LED work light mounted on the Jib » LED for 2 support legs, not mounted » (Crane) LED for 2 support legs, not mounted » (Additional support beam) Electric rotary distributor with 14 » slip contacts 1 zinc primer from 720RA to F820RA "Zinc primer for JIB ""L42""" Additional price for Dinitrol applicat

Condition: used, mileage: 78,841 km, power: 110 kW (149.56 HP), first registration: 02/2018, fuel type: diesel, overall weight: 7,490 kg, color: white, gearing type: mechanical, emission class: euro6, number of seats: 3, loading space volume: 3 m³, loading space length: 3,400 mm, loading space width: 2,300 mm, loading space height: 350 mm, Year of construction: 2018, Equipment: ABS, crane, soot filter, * FUSO 7 C 15 Tipper MEILLER 3-way with FRONT CRANE FASSI F40.A.023 specially equipped for TREE CARE including grab attachment * Hydraulic extension max. 7.85 m, lifting capacity 415 kg * RADIO REMOTE CONTROL for crane * Payload approx. 2,980 kg * Vehicle No. for customer inquiries: 4568 * Crane * EBS * Trailer coupling * Manual gearbox * Particle filter * Electric windows * Anti-lock braking system (ABS) * Power steering * Steel rims * Driver airbag * Limited slip differential lock * 3-way tipper, 3400x2300x400mm, single cab, crane * Driver comfort suspension seat, horizontal suspension * Transmission PTO, 200 Nm, for hydraulic pump * Manual throttle for engine speed * Domestic (Germany) * Ball head trailer coupling + 12V electrical kit (vehicle voltage 12V) * Heated exterior mirrors * Medium mirror bracket * Lane keeping assistant * Environmental badge (green) * Three-seater * Full service history * Airbag * Wheelbase 3,400 mm * 2/3 doors Godpjyulmwofx Ahaouf No liability for printing and typing errors Sale exclusively to business customers Errors and interim sale excepted; changes, interim sale, and errors expressly reserved. The description serves to identify the vehicle and does not constitute a warranty in the legal sense. The description in the purchase contract is binding. * TOP SERVICE + QUALITY * We will be happy to provide a LEASING-FINANCING-INSTALLMENT PURCHASE offer * Warranty insurance available on request from the insurer * TÜV / UVV LBW / Tachograph inspection and OBU device installation possible by our local partners * Customs license plate for 30 days All export customs documents possible upon individual request * Toll booking for Toll-Collect available in-house * Free transfer from Stuttgart airport or Metzingen (Württ) train station * ARRIVAL TRAIN STATION: 72555 METZINGEN/WÜRTT. * FOR ENGLISH * Andreas Pittas * Thomas Pittas * Alexander Pittas * Robin Pittas WHATSAPP Number * * ---- Visit us on our website at * over 200 vehicles always in stock

Condition: new, overall weight: 32,000 kg, axle configuration: 2 axles, loading space length: 12,300 mm, total width: 2,550 mm, Year of construction: 2026, Equipment: ABS, Wiese 2-axle stepped saddle plateau with Fassi F545 crane Mega Lowliner Chassis Welded construction with cross beams made entirely of high-quality steel Neck height = approx. 220 mm including coupling plate with all necessary chassis reinforcements and cross connections Axles 2 BPW axles with a load capacity of 10,000 kg each with 17.5" drum brakes ABS: 1 axle sensing Wheelbase: 1,810 mm Tires 8-wheel type 235/75 R17.5 Rims Aluminum rims, 10-hole, centered, ET= 122 mm Lighting system 24V lighting system in accordance with EU directives 76/756/EEC ff. with: 2x2 three-chamber LED lights 1x reversing light LED 1x LED fog light LED side marker lights Lane departure lights License plate illumination 2x 7-pin sockets + 1x 15-pin socket connected according to EU standard Floor Galvanized grating covering on drop deck Steel tear plate in the axle area Load securing Outer frame with lashing hole profile D030 mm in the slope 2x12 lashing points 8,000 daN in the outer frame 3x combi row of stanchion pockets for 80x80 mm stanchions in the drop deck Accessories 2x wheel chocks with holder Spare wheel holder Winch 2x storage box with drawer (chain storage) Gusdpfx Aen Hrtgjhajf Surface protection Steel construction: blasted and primed Coloring Chassis/frame/floor frame: single color in RAL 3020 (traffic red) Axle hubs: single-colored in RAL 3020 (traffic red) Axles: KTL-coated black Rims: Aluminum Durabright With Fassi F 545 RA.2.28 XE-Dynamic Hydraulic outriggers Additional support beam 360 ° working range approx. 90 % to the front For further information please do not hesitate to contact us

Condition: new, overall weight: 32,000 kg, axle configuration: 2 axles, loading space length: 12,300 mm, total width: 2,550 mm, Year of construction: 2026, Equipment: ABS, Wiese 2-Axle Step Frame Semi-Trailer in extendable version with Fassi Crane F545RA.2.26 Mega Lowliner as step frame semi-trailer. Chassis Welded construction with cross members, made entirely from high-quality steel Neck construction reinforced for front-mounted crane Axles 2 BPW axles, each with 10,000 kg load capacity, 17.5" drum brakes ABS: 1 axle sensor-controlled Axle spacing: 1,810 mm Both axles equipped with forced steering Tyres 8x type 235/75 R17.5 Rims Aluminum rims, 10-hole, hub-centric, ET=122 mm offset Lighting system 24V lighting system compliant with EU Directives 76/756/EWG and following, with: 2x2 three-chamber LED taillights 1x LED reversing light 1x LED fog light LED side marker lights Lane keeping lamps License plate illumination 2x 7-pin sockets + 1x 15-pin socket wired according to EU standard Floor Anti-slip birch plywood flooring Steel checker plate above axle area Load securing Outer frame with lashing hole profile D030 mm on inclined edge 2x12 lashing points 8,000 daN in outer frame 3x rows of combination pin stake pockets for 80x80 mm stakes in the low bed Accessories 2x wheel chocks with holders Spare wheel holder with winch Guodpfxjyihgys Ahaof 2x storage boxes with sliding compartment (for chain storage), etc. Crane: Fassi F 545 RA.2.26 XE-Dynamic Hydraulic outriggers Additional outrigger beams 360° working area Approx. 100% outreach forward The attached images are sample images. We manufacture crane semi-trailers in various versions. For further information, we are at your disposal. Upon request, we will provide you with a customised quotation tailored to your equipment requirements.

Condition: new, overall weight: 32,000 kg, axle configuration: 2 axles, loading space length: 12,300 mm, total width: 2,550 mm, Year of construction: 2026, Equipment: ABS, Wiese 2-axle stepped saddle plateau with Fassi F545 crane Mega Lowliner Chassis Welded construction with cross beams made entirely of high-quality steel Neck height = approx. 220 mm including coupling plate with all necessary chassis reinforcements and cross connections Axles 2 BPW axles with a load capacity of 10,000 kg each with 17.5" drum brakes ABS: 1 axle sensing Wheelbase: 1,810 mm Tires 8-wheel type 235/75 R17.5 Rims Aluminum rims, 10-hole, centered, ET= 122 mm Lighting system 24V lighting system in accordance with EU directives 76/756/EEC ff. with: 2x2 three-chamber LED lights 1x reversing light LED 1x LED fog light LED side marker lights Lane departure lights License plate illumination 2x 7-pin sockets + 1x 15-pin socket connected according to EU standard Floor Galvanized grating covering on drop deck Steel tear plate in the axle area Load securing Outer frame with lashing hole profile D030 mm in the slope 2x12 lashing points 8,000 daN in the outer frame 3x combi row of stanchion pockets for 80x80 mm stanchions in the drop deck Accessories 2x wheel chocks with holder Spare wheel holder Winch 2x storage box with drawer (chain storage) Surface protection Steel construction: blasted and primed Coloring Chassis/frame/floor frame: single color in RAL 3020 (traffic red) Axle hubs: single-colored in RAL 3020 (traffic red) Gsdpfx Ahet Izpysasuf Axles: KTL-coated black Rims: Aluminum Durabright With Fassi F 545 RA.2.28 XE-Dynamic Hydraulic outriggers Additional support beam 360 ° working range approx. 90 % to the front For further information please do not hesitate to contact us

Condition: new, overall weight: 39,000 kg, axle configuration: 3 axles, loading space length: 12,200 mm, loading space width: 2,550 mm, loading space height: 1,300 mm, total width: 2,550 mm, Year of construction: 2026, Equipment: ABS, Wiese 3-axle semi-trailer in platform design with Fassi F545RA.2.26 crane Chassis Welded construction with cross members, made entirely of high-quality steel Neck construction reinforced for front-mounted crane Axles 3 BPW axles, each with a 9,000 kg load capacity, equipped with disc brakes ABS: 1 axle with sensor Axle spacing: 1,310 mm / 1,420 mm 3rd axle is a trailing steering axle (optionally available with forced steering) Tyres 6 x 385/65 R22.5, mounted on steel rims Lighting system 24V lighting system according to EU regulations 76/756/EEC ff., featuring: 2x2 three-chamber LED rear lights 1x LED reversing light 1x LED fog lamp LED side marker lights Lane marker lights Number plate illumination 2x 7-pin sockets + 1x 15-pin socket, wired according to EU standard Floor Phenolic plywood flooring Steel chequer plate above the axle area Load securing Outer frame with D030 mm lashing hole profile in the inclined edge 2x12 lashing points, 8,000 daN on the outer frame 3 rows of combi stake pockets for 80x80 mm plug-in stakes in the lowered bed area Accessories 2x wheel chocks with bracket Spare wheel bracket with winch 2x storage boxes with drawers (for chain storage) etc. Crane: Fassi F 545 RA.2.26 XE-Dynamic Hydraulic outriggers Additional stabilizer support 360° working range approx. 100% outreach to the front The attached images are sample images. Gedpfxoyihg Tj Ahajuf We manufacture crane semi-trailers in a variety of versions. For further information, please do not hesitate to contact us. Upon request, we will be happy to provide a customised quotation based on your required specifications.

Condition: used, mileage: 2,69,400 km, power: 353 kW (479.95 HP), first registration: 03/2009, fuel type: diesel, empty load weight: 16,285 kg, maximum load weight: 9,715 kg, overall weight: 26,000 kg, axle configuration: 4x4, wheelbase: 4,300 mm, fuel: diesel, brakes: engine braking, color: orange, driver cabin: day cab, gearing type: mechanical, emission class: euro4, suspension: steel-air, loading space length: 5,600 mm, loading space height: 700 mm, Equipment: ABS, air conditioning, all wheel drive, crane, cruise control, differential lock, low noise, onboard computer, trailer coupling, MAN TGS 26.480 6X4H-2 BL Flatbed Truck with Heavy-duty Crane First registration: 03/2009 Only 269,400 km with documentation Short cab Manual transmission Air conditioning Trailer hitch 6X4 Hydrodrive Rear axle with air suspension Third axle steering and liftable Tyres: 385/65 R22.5 approx. 60% tread Tyres: 315/80 R22.5 approx. 60% tread Wheelbase: 4,300 mm Platform length: 5,600 mm Drop sides: 700 mm Loading height: 1,150 mm Curb weight: 16,285 kg Crane: Fassi F310AXP.25 Radio remote control Cable winch 5th and 6th hydraulic circuits for additional attachments 4-point stabilizers 5 hydraulic extensions 2.75 m / 9,000 kg 4.60 m / 6,225 kg Gjdpfx Asyu Snhohaeuf 6.45 m / 4,245 kg 8.40 m / 3,115 kg 10.40 m / 2,425 kg 12.40 m / 1,990 kg 14.60 m / 1,640 kg Hook height approx. 18.50 meters German vehicle from first owner, well-maintained condition. Export / net price: €73,900 All information without guarantee, subject to errors.

Condition: used, mileage: 30,800 km, power: 309 kW (420.12 HP), first registration: 08/2012, fuel type: diesel, empty load weight: 12,420 kg, maximum load weight: 5,580 kg, overall weight: 18,000 kg, axle configuration: 4x2, wheelbase: 5,300 mm, fuel: diesel, brakes: engine braking, color: red, driver cabin: sleeper cab, gearing type: mechanical, emission class: euro5, suspension: air, loading space length: 6,200 mm, loading space height: 600 mm, Equipment: ABS, air conditioning, crane, cruise control, differential lock, low noise, onboard computer, parking heater, soot filter, trailer coupling, Scania R420 4x2 flatbed truck with crane Registration date: 08/2012 Only 30,800 km, with proof of mileage!!! Engine operating hours: 1,632!!! CR19 long cab with a sleeper berth Euro 5 emission class Manual transmission Trailer coupling Air conditioning, auxiliary heater Wheelbase 5300mm Full air suspension Tires 295/60 R22.5, tread approximately 60% Flatbed: 6200mm Side boards: 600mm Loading height from the ground to the top edge of the flatbed: 1100mm Unladen weight: 12,420 kg Guodpsyymy Rofx Ahasf Crane: Fassi F135A.2.26 E-Dynamic Radio remote control Winch 7 extensions in total 6 hydraulic extensions + 1 mechanical extension 2.50m / 3800kg 4.75m / 2435kg 6.60m / 1530kg 8.55m / 1025kg 10.60m / 725kg 12.70m / 540kg 14.85m / 435kg 16.95m / 365kg 19.15m / 275kg (mechanical extension) Hook height approx. 23 meters The vehicle is from the first owner and is in good condition. Valid TÜV (technical inspection) until April 2027. Export/net price: 59,900 Euro All information is without guarantee, subject to change.

Condition: used, mileage: 2,69,400 km, power: 353 kW (479.95 HP), first registration: 03/2009, fuel type: diesel, empty load weight: 16,285 kg, maximum load weight: 9,715 kg, overall weight: 26,000 kg, axle configuration: 6x4, wheelbase: 4,300 mm, fuel: diesel, brakes: engine braking, color: orange, driver cabin: day cab, gearing type: mechanical, emission class: euro4, suspension: steel-air, loading space length: 5,600 mm, loading space height: 700 mm, Equipment: ABS, air conditioning, all wheel drive, crane, cruise control, differential lock, low noise, onboard computer, trailer coupling, MAN TGS 26.480 6X4H-2 BL Flatbed with Heavy-Duty Crane Guedpfx Ahsyu Snbsaof First registration: 03/2009 Only 269,400 km with documentation Short cab Manual transmission Air conditioning Trailer coupling 6x4 Hydrodrive Rear axle with air suspension 3rd axle is steered and liftable Tyres: 385/65 R22.5 with approx. 60% tread Tyres: 315/80 R22.5 with approx. 60% tread Wheelbase: 4,300 mm Platform length: 5,600 mm Side walls: 700 mm Loading height: 1,150 mm Unladen weight: 16,285 kg Crane: Fassi F310AXP.25 Radio remote control Winch 5th + 6th hydraulic circuits for additional attachments 4-point stabilizers 5 hydraulic extensions 2.75 m / 9,000 kg 4.60 m / 6,225 kg 6.45 m / 4,245 kg 8.40 m / 3,115 kg 10.40 m / 2,425 kg 12.40 m / 1,990 kg 14.60 m / 1,640 kg Hook height approx. 18.50 meters German vehicle from first owner, well-maintained condition. Export / net price: 73,900 EUR All details without guarantee, subject to errors and prior sale.

Condition: used, mileage: 30,800 km, power: 309 kW (420.12 HP), first registration: 08/2012, fuel type: diesel, empty load weight: 12,420 kg, maximum load weight: 5,580 kg, overall weight: 18,000 kg, axle configuration: 4x2, wheelbase: 5,300 mm, fuel: diesel, brakes: engine braking, color: red, driver cabin: sleeper cab, gearing type: mechanical, emission class: euro5, suspension: air, loading space length: 6,200 mm, loading space height: 600 mm, Equipment: ABS, air conditioning, crane, cruise control, differential lock, low noise, onboard computer, parking heater, soot filter, trailer coupling, Scania R420 4x2 flatbed truck with crane First registered: 08/2012 Only 30,800 km, with documentation!!! Engine operating hours: 1,632!!! CR19 long cab with a sleeper berth Euro 5 emission standard Manual transmission Trailer coupling Air conditioning, auxiliary heater Wheelbase 5300mm Full air suspension Tires 295/60 R22.5, tread depth approx. 60% Flatbed length 6200mm Guedpfsyymy Djx Ahajf Side boards 600mm Loading height from the ground to the top edge of the flatbed: 1100mm Unladen weight 12,420 kg Crane: Fassi F135A.2.26 E-Dynamic Radio remote control Winch 7 total outrigger extensions 6 hydraulic extensions + 1 mechanical extension 2.50m / 3800kg 4.75m / 2435kg 6.60m / 1530kg 8.55m / 1025kg 10.60m / 725kg 12.70m / 540kg 14.85m / 435kg 16.95m / 365kg 19.15m / 275kg (mechanical extension) Hook height approx. 23 meters The vehicle is from a single owner and is in well-maintained condition. Valid TÜV (technical inspection) until April 2027. Export/net price: €59,900 All information without guarantee, subject to errors.

Condition: used, functionality: fully functional, mileage: 1,49,200 km, first registration: 02/2018, fuel type: diesel, empty load weight: 3,000 kg, maximum load weight: 500 kg, overall weight: 3,500 kg, tire condition: 80 %, axle configuration: 4x2, fuel: diesel, fuel tank capacity: 100 l, color: white, driver cabin: day cab, gearing type: mechanical, emission class: euro6, suspension: steel, number of seats: 3, total length: 6,900 mm, total width: 2,100 mm, Year of construction: 2018, Equipment: ABS, additional headlights, air conditioning, central locking, crane, electric window regulation, truck registration, Iveco Daily 35C16 Platform body FASSI F32A.0.23 crane with 2 outriggers and 3 hydraulic extensions 4x2 Gsdpfx Aezarzfshaouf leaf spring suspension Manual transmission GVW 3,500 kg – payload 500 kg Overall truck length 6.90 m Euro 6B Tires with 80% tread 100L tank Air conditioning Electric windows and exterior mirrors ABS Export net price €33,000.00 All information subject to change without notice / errors and omissions excepted.

Condition: used, mileage: 2,12,700 km, power: 294 kW (399.73 HP), first registration: 12/2008, fuel type: diesel, empty load weight: 14,450 kg, maximum load weight: 11,550 kg, overall weight: 26,000 kg, axle configuration: 6x4, wheelbase: 3,900 mm, fuel: diesel, brakes: engine braking, color: yellow, driver cabin: sleeper cab, gearing type: mechanical, emission class: euro4, suspension: steel-air, loading space length: 4,600 mm, loading space height: 600 mm, Equipment: ABS, air conditioning, all wheel drive, crane, cruise control, differential lock, low noise, onboard computer, soot filter, trailer coupling, MAN TGS 26.400 6x4H-2 BL, flatbed/tipper truck with crane First registered: 12/2008 Only 212,700 km, documented Long cab Manual transmission Air conditioning 2x trailer hitch 6x4 Hydrodrive Rear axle with air suspension 3rd axle, steerable and liftable Tires 385/65 R22.5, tread approx. 60% Tires 315/80 R22.5, tread approx. 60% Wheelbase 3900mm Flatbed/tipper body 4600mm Side boards 600mm Unladen weight 14,450 kg Gujdpoza E Eqofx Ahaef Crane: Fassi F235AXP + JIB L213 + winch + work platform Radio remote control Winch Including work platform 4-point outrigger system Main crane, 4 hydraulic extensions 2.60m / 6150 kg 4.45m / 4325 kg 6.45m / 2885 kg 8.45m / 2100 kg 10.60m / 1630 kg 12.70m / 1345 kg Hook height approx. 16.50 meters + Fly Jib L213, 3 hydraulic extensions 14.50m / 685 kg 15.40m / 535 kg 17.10m / 445 kg 18.90m / 380 kg 20.85m / 335 kg Hook height approx. 25 meters The vehicle is from a single owner. The technical inspection is valid until December 2026. Export/net price: 65,900 Euros All information is subject to change without notice. Errors and omissions excepted.

Condition: used, mileage: 2,12,700 km, power: 294 kW (399.73 HP), first registration: 12/2008, fuel type: diesel, empty load weight: 14,450 kg, maximum load weight: 11,550 kg, overall weight: 26,000 kg, axle configuration: 6x4, wheelbase: 3,900 mm, fuel: diesel, brakes: engine braking, color: yellow, driver cabin: sleeper cab, gearing type: mechanical, emission class: euro4, suspension: steel-air, loading space length: 4,600 mm, loading space height: 600 mm, Equipment: ABS, air conditioning, all wheel drive, crane, cruise control, differential lock, low noise, onboard computer, soot filter, trailer coupling, MAN TGS 26.400 6x4H-2, flatbed/tipper with crane First registered: 12/2008 Only 212,700 km, with documentation Long cab Manual transmission Air conditioning 2x trailer coupling 6x4 Hydrodrive Guedpfx Ahsza E Ekeaof Rear axle with air suspension 3rd axle, steerable and liftable Tires 385/65 R22.5, tread approx. 60% Tires 315/80 R22.5, tread approx. 60% Wheelbase 3900mm Flatbed/tipper body 4600mm Side boards 600mm Unladen weight 14,450 kg Crane: Fassi F235AXP + JIB L213 + winch + work platform Radio remote control Winch Including work platform 4-point outrigger system Main crane, 4 hydraulic extensions 2.60m / 6150 kg 4.45m / 4325 kg 6.45m / 2885 kg 8.45m / 2100 kg 10.60m / 1630 kg 12.70m / 1345 kg Hook height approx. 16.50 meters + Fly Jib L213, 3 hydraulic extensions 14.50m / 685 kg 15.40m / 535 kg 17.10m / 445 kg 18.90m / 380 kg 20.85m / 335 kg Hook height approx. 25 meters The vehicle is from a single owner. The technical inspection is valid until December 2026. Export/net price: 65,900 Euros All information is without guarantee, errors and omissions excepted.

Condition: new, diameter -- mm workpiece length -- mm work piece width 0 - 20 mm speeds 2850 U/min range of angles 0 - 60 (stufenlos) ° weight of the machine ca. 19,5 kg Maximum chamfer width 20 mm + face machining Designed for chamfering and deburring straight edges, for the so-called FACING - removing an unwanted layer of material on the Front side of the workpiece, which is created, for example, by flame cutting a sheet metal. Specially developed for the production of visible chamfers and weld preparations. Powerful electric drive for extreme Charges. * High performance motor * stepless adjustment of the working angle in the range of 0° - 60° Guodpfxeppgcvo Ahajf * FACING - Edge processing at an angle of 0° to remove unwanted ones Layers of material after flame cutting * The unique mechanical scale to adjust the bevel width for higher precision * A very compact and ergonomic design for high work productivity * Circumferential protective frame against damage and versatile grip options * With the appropriate accessories, pipes from D= 150 mm can also be processed * Additional adjustable handle - Chamfer width (hypotenuse): 0 - 20 mm = 400 Mpa / 0 - 16 mm = 400 Mpa - Motor: 1100W

Condition: new, diameter -- mm workpiece length -- mm work piece width 18 mm range of angles 15° - 50° ° weight of the machine ca. 110 kg Chamfering system UZ18 HARDWORKER Maximum bevel width 18 mm with automatic feed The UZ18 Hardworker machine is one of the most powerful automatic feed beveling machines on the market. It is not only suitable for workshops, but also for on- site assembly. The machine has a stepless working angle adjustment system. Thanks to the special design of the drive system, the UZ18 Hardworker is also suitable for harder materials. The machine is equipped with the automatic feed. Working with UZ18 Hardworker is therefore very convenient. *For conventional steel (up to 600 MPA/87022 PSI strength), brass, copper and aluminum materials * For chamfering workpieces with the minimum dimensions of 70 x 150 x 6 mm * Application range of sheet thickness 6 - 40 mm * The bevel angle can be easily adjusted continuously from 15° to 50° without replacing any part * Double-sided bevel (X, K) with no material handling * Easy connection to 3D manipulator for easier operation and handling * Silent working * Equipped with automatic feeder * Stationary or mobile use * The machine works with large workpieces without any support at a speed of 1.9 m/min * Smaller workpieces are placed directly in the machine - Max. bevel width (hypotenuse): 18 mm - Infinitely adjustable angle: 15° - 50° - Area of application sheet thickness: 6 - 40 mm - Motor: 750W - Feed speed: 1.9 m/min Gusdpfx Ahsk Egrtoasf - Weight: 110kg - Dimension: 438 x 719 x 644 mm We are happy to offer you an optional 3D manipulator (mobile) for this device on

Condition: new, diameter -- mm work piece width -- mm workpiece length -- mm Chamfering system UZ12 ULTRALIGHT - KIT 30° + 45° Maximum bevel width 12 mm with automatic feed The UZ12 ULTRALIGHT is one of the lightest automatic beveling machines Guodpfx Ahor I E Exjasf advance in the market. Thanks to its compact size and light weight it is not only suitable for workshops, but also for assemblies. The Machine is equipped with the automatic feed and therefore does this Working with the UZ12 ULTRALIGHT very comfortably. * For conventional steel (up to 600 MPA/87022 PSI strength), Brass, copper and aluminum materials * For chamfering workpieces with the minimum dimensions of 65 x 60 x 3 mm * Application range of sheet thickness 3 - 35 mm * Beveling of pipes from an inner diameter of 95 mm * Variable setting of the desired bevel using an exchangeable holder kit for any given angle * Double-sided bevel (X, K) with no material handling * Silent working * Equipped with an automatic feed * Stationary or mobile use * The machine works with large workpieces without any support a speed of 1.8m/min * Smaller workpieces are placed directly in the machine * Lightweight and compact design, handleable by one operator * Motor thermal protection - Max. bevel width (hypotenuse): 12 mm - Bevel angle: 30° / 45° / 22.5° / 37.5° / 50° (replaceable KIT) - Area of application sheet thickness: 3 - 35 mm - Motor: 400W - Feed speed: 1.8 m/min - Dimension: 470 x 294 x 523 mm We can also offer you an optional 3D manipulator (mobile) for this device on

Condition: new, diameter -- mm Gedpek Uqhaefx Ahaeuf workpiece length -- mm work piece width 15 mm range of angles 15-50 ° plate thickness 6-40 mm total power requirement 1,5 kW Feed speed 3,5 m/min. dimensions 530 x 395 x 860 mm weight of the machine ca. 94 kg The UZ15 RAPID machine is one of the fastest beveling machines with automatic feed on the market. It is not only suitable for workshops, but also for assembly work. It has a stepless Bevel angle adjustment system. Also, the machine with an automatic feed equipped. Working with the UZ15 Rapid is therefore very convenient. - For conventional steel (up to a strength of 600 MPA/ 87022PSI), brass, copper and aluminum materials - For chamfering workpieces with the minimum dimensions of 70 x 150 x 6 mm - Application range of sheet thickness 6 - 40 mm - The bevel angle can be easily adjusted from 15° to 50° continuously without that a part needs to be replaced - Double-sided bevel (X, K) without material handling - Easy connection to the 3D manipulator for easier operation and handling - Silent working - Equipped with automatic feeder - Stationary or mobile use - The machine works with large workpieces without any support a speed of 3.5m/min - Smaller workpieces are placed directly in the machine - Reduced price when purchasing UZ15 RAPID together with the 3D manipulator

Condition: new, diameter -- mm workpiece length -- mm work piece width 0 - 3 mm speeds 3600 U/min range of angles 30 - 60 (stufenlos) ° weight of the machine ca. 31 kg dimensions of the machine ca. 530 x 420 x 410 mm Maximum bevel width of 3 mm - Mechanically adjustable bevel angle Designed for deburring and chamfering steel parts and workpieces. Processing of different materials. Solid and stable machine construction. * Scale for setting the processing depth * Security cover * Adjustable processing angle Godpfx Ahsppgcreaeuf * For steel, stainless steel, aluminum and other materials * Precise, massive and overlong mechanical guide - Number of indexable inserts: 5 pieces (four-sided) - Feed: manual

Condition: new, diameter -- mm workpiece length -- mm work piece width 12 mm range of angles 30/45/22,5/37,5/50 ° weight of the machine ca. 30 kg Chamfering system UZ12 ULTRALIGHT - KIT 30° + 45° Maximum bevel width 12 mm with automatic feed The UZ12 ULTRALIGHT is one of the lightest automatic beveling machines advance in the market. Thanks to its compact size and light weight it is not only suitable for workshops, but also for assemblies. The Machine is equipped with the automatic feed and therefore does this Working with the UZ12 ULTRALIGHT very comfortably. * For conventional steel (up to 600 MPA/87022 PSI strength), Brass, copper and aluminum materials * For chamfering workpieces with the minimum dimensions of 65 x 60 x 3 mm * Application range of sheet thickness 3 - 35 mm * Beveling of pipes from an inner diameter of 95 mm * Variable setting of the desired bevel using an exchangeable holder kit for any given angle * Double-sided bevel (X, K) with no material handling * Silent working * Equipped with an automatic feed * Stationary or mobile use * The machine works with large workpieces without any support a speed of 1.8m/min * Smaller workpieces are placed directly in the machine * Lightweight and compact design, handleable by one operator * Motor thermal protection - Max. bevel width (hypotenuse): 12 mm - Bevel angle: 30° / 45° / 22.5° / 37.5° / 50° (replaceable KIT) - Area of application sheet thickness: 3 - 35 mm - Motor: 400W - Feed speed: 1.8 m/min - Dimension: 470 x 294 x 523 mm We can also offer you an optional 3D manipulator (mobile) for this Gsdeppgcyepfx Ahaeuf device on