Used Angle Plant for sale (9,684)

Condition: new, STATIONARY CONCRETE BATCHING PLANT S160-TWN GENERAL Plant Type : Stationary Concrete Plant with TWIN Shaft Mixer Plant Capacity : 160m³/hour freshly compressed concrete Mixer Capacity : 6000/4000 lt (4m³ Compressed Concrete) Total Motor Power : 245kw Standard Value can be changed depending on Equipment.. Voltage/Frequency : 380V/50Hz Standard Value. Gkedpfx Asflz Insdkjd The installation and startup of the plant is under our responsibility. We provide excellent after-sales service. 24/7 SERVICES. REMOTE CONTROL SERVICE. Exporting more than 1000 Concrete Batching Plants to more than 90 Countries all over the world. * HIGHLY EFFICIENT AND DUPLICATE PRODUCTION * EASY MAINTENANCE * SUITABLE TO WORK UNDER HARD CONDITIONS * ABLE TO PRODUCE RCC CONCRETE DETAILS: Compacted concrete capacity : 160 m³/h Air Compressor Capacity : 1400 lt/min Aggregate Hopper : 4×40 = 160m³ or 6×30 = 180m³ Mixer Type : TWIN Shaft (4m³). 6000/4000 lt capacity Aggregate Conveyor Band : 1200 mm * 35000 mm Weighbridges: Aggregate/ Cement /Water/ Additives OPTIONS: *Cement Silo: 75-100-150-200-500 tons *Cement Silo Equipment and Screw Conveyor. Central Lubrication System Brand : ILC (made in italy) Mixer body Plates : Manganese (it can manufacture 50.000m3-450.000m3) Mixer Internal Linings (Wear Plates) : Ni- hard special hard cast material Discharging in Emergency Situations : manual Emergency Situation hand pump Emergency Stop Button available. Digital Mixer Control System (alarm) Automatic lubrication system monitor feature on pc Control System: Full automatic pc - plc – printer. Unlimited users Remote access Unlimited prescriptions and customer registration Retrospective reporting English- Russian- French- Arabic-German-Spanish languages are available. Switching materials used in the MCC dashboard are SIEMENS Back off available.

Condition: excellent (used), Year of construction: 2010, CEMENT SILOS 53 m³/68 tons, FILTER, LADDERS, SAFETY RAILINGS, LEVEL SENSORS, GOOD CONDITION + Gsdpfx As Af Ey Uedkokd

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2007, FOR SALE: COMPLETE ELBA EMC 38 READY-MIX CONCRETE PLANT – 2007 – 4 FRACTIONS – 2 × 50 T SILOS – PLC CONTROL For sale is a complete ELBA EMC 38 ready-mix concrete plant, manufactured in 2007. The equipment is sold as a complete technological system, including a 4-fraction batching system, a conveying belt system, 2 x 50-ton cement silos, automatic PLC control, and a control/office container. TECHNICAL DATA AND EQUIPMENT: Gkedpoz Db Tzefx Adked • Manufacturer: ELBA • Type: EMC 38 • Year of manufacture: 2007 • Horizontal-shaft mixer with bevel gear drive • Mixer capacity: approx. 0.5 m³ / 500 liters per mixing cycle • Nominal operating capacity: approx. 38 m³/hour • 4-fraction batching system for aggregates • Conveying belt system • 2 cement silos, each with a capacity of 50 tons • Refurbished cement silos • New silo filters • New safety/overpressure valves • The mixer lining is in new condition and very good condition • Automatic PLC control • Control/office container included in the purchase price DISMANTLING, LOADING AND TRANSPORT: The ready-mix concrete plant is sold in a dismantled condition. During dismantling, electrical cables and connections will be marked to ensure that the equipment can be reassembled and electrically reconnected in its new location as clearly as possible. The seller will arrange for the equipment to be loaded onto the buyer’s provided transport vehicles. The organization of transport, the provision of suitable transport vehicles, and all transport costs are the responsibility of the buyer. The equipment is sold in the condition documented in the photographs and with the equipment detailed above. Additional detailed photos, technical information, and videos are available upon request. Location: Hungary Purchase price: 120,000 EUR + VAT

Condition: like new (used), Year of construction: 2018, operating hours: 865 h, functionality: fully functional, For sale: Jenbacher gas engine JMS 420 GS-B.LC. A used, high-performance Jenbacher JMS 420 GS-B.LC gas engine (series 4) for stationary use in combined heat and power (CHP) plants is for sale. Manufacturer: INNIO Jenbacher. Type: JMS 420 GS-B.LC. Electrical output: approx. 1,400–1,500 kW (depending on gas type and configuration). Gas type: natural gas / biogas / sewage gas. Year of manufacture: 2018. Operating hours: 865 h. Condition: engine preserved. Scope of delivery: engine including control panel, exhaust system, etc. Special features: high electrical and thermal efficiency, reliable MWM/Jenbacher technology for continuous operation. Location: 48599 Gronau. Availability: immediately / by arrangement. Price: negotiable (upon request). If you are interested, have questions about technical details, or would like to arrange a viewing appointment, please do not hesitate to contact us. Gsdpfs Ahnzbjx Adkekd

Condition: reconditioned (used), Year of construction: 2019, operating hours: 5,144 h, functionality: fully functional, overall weight: 25,000 kg, total width: 2,550 mm, total length: 9,500 mm, total height: 3,400 mm, transport width: 2,550 mm, transport length: 10,000 mm, transport height: 3,400 mm, year of last overhaul: 2026, rotor diameter: 600 mm, rotational speed (max.): 30 rpm, Doppstadt DW 3060 Buffel – Type F – BioPower - Year of manufacture: 2019 - Operating hours: 5144 - Engine: MTU 6R 1300 (490 hp) - Weight: 25,000 kg - Number of teeth: 42 pcs. - Hydraulic self-propelled drive Gkodpj Aarnzjfx Adkod - Remote radio control - Central lubrication system - Rear discharge conveyor (5.5 m) - Magnetic separator (overband type) - BioPower system – increased power and efficiency - 3-axle chassis - Working shaft: 3000 x 600 mm Machine has been refurbished and is available immediately.

Condition: as good as new (ex-display), Year of construction: 2023, operating hours: 2 h, functionality: fully functional, Cable granulating plant GUIDETTI SINCRO MILL 530 + pre-shredder PMG-H 900 – immediately available – like new For sale is a high-quality cable recycling plant from the Italian manufacturer Guidetti, consisting of: • Guidetti Sincro Mill 530 cable granulating plant • Guidetti PMG-H 900 pre-shredder • External filter system The plant was installed at a customer's site, tested, and then professionally dismantled. Due to a project change, the plant is now being offered for sale. Condition: almost like new (only test operation) Availability: immediately from stock – no delivery time Price: attractive price advantage compared to a new plant. Special price applies for purchase completion by the end of November 2026 --- Special advantages: • Immediately available – no delivery time of several months as with new machines • Only operated in test mode – accordingly very low wear • Complete system incl. pre-shredder • Proven Guidetti technology --- Description: The Sincro Mill 530 is a compact, fully integrated cable granulating plant for processing mixed copper and aluminum cables – without pre-sorting. The system consists of: • Granulator (cutting mill) • Zigzag separator • Turbine for fine grinding • Dry separation table Material purity up to 99%. In combination with the pre-shredder PMG-H 900, it results in a powerful recycling line for industrial applications. --- Technical data Sincro Mill 530: • Throughput: 450 – 600 kg/h • Motor power: 53 kW • Dimensions (L x W x H): 3410 x 1515 x 4395 mm • Weight: approx. 2,700 kg • Processing of copper and aluminum cables --- Technical data pre-shredder PMG-H 900: • Power: approx. 38.5 kW • Dimensions (L x W x H): 2110 x 2070 x 2245 mm • Weight: approx. 2,840 kg Gkjdpfxey Ahlyj Adkjd Suitable for pre-shredding cables, non-ferrous metals and plastics. --- Note: The plant is available in the short term. Subject to prior sale. Inspection possible by arrangement.

Condition: ready for operation (used), Year of construction: 2022, operating hours: 3,200 h, functionality: fully functional, power: 35 kW (47.59 HP), Spanner wood gasifier HKA 35 for sale Gkodpfx Ade Ait Aijked A Spanner wood gasifier HKA 35, manufactured in 2022, is for sale. The system is in good and well-maintained condition and is currently still in operation. An inspection and demonstration under operating conditions are possible after prior arrangement. The system is operated with wood chips. A major advantage: independence from the gas and energy market. Technical data: Manufacturer: Spanner Type: HKA 35 Year of manufacture: 2022 Electrical output: 35 kWh Thermal output: 80 kWh Operating hours: approx. 3,200 h The sale is solely due to the seller's retirement. The system has always been operated with care. All customer service and maintenance work has been carried out regularly. Location: 88339 Bad Waldsee Price: €120,000 (negotiable) For further information or to arrange an inspection appointment, please do not hesitate to contact me. Private sale.

Condition: excellent (used), Year of construction: 2004, operating hours: 11,400 h, functionality: fully functional, Willibald MZA 4600 shredding machine, manufactured in 2004, with 11,400 operating hours and in perfect condition. Godpfx Ao Ah Rt Ujdkskd

Condition: new, functionality: fully functional, color: other, Year of construction: 2026, As Constmach, we develop mobile asphalt plants that offer flexibility, speed, and efficiency in infrastructure and road construction projects. Thanks to their portable design, our mobile plants can be easily transported from one project to another, minimizing time loss by enabling quick setup. With an average production capacity of 60 to 160 tons/hour, these plants have the power to produce asphalt of equivalent quality to fixed plants. Their compact design, integrated chassis system, and advanced automation equipment both simplify production processes and increase field efficiency. Gedpfx Aoxp Sdqsdkjkd Key Features: High Capacity: 60–160 tons/hour production capacity for solutions suitable for projects of different scales. Flexible Design: Modules that can be customized according to project requirements. Quick Installation: Can be put into operation in a short time without requiring site preparation. Advanced Control Systems: Precise and error-free production with a PLC-based fully automatic control unit. Constmach mobile asphalt plants combine speed, quality, and efficiency in one package. With their easy transportability, energy-efficient production, and long-lasting components, they are your most reliable partner in asphalt production. Choose Constmach mobile asphalt plants to quickly start your projects and make a difference in quality asphalt production! Why Constmach Mobile Asphalt Plants? Superior Quality: All main components are manufactured from high-strength materials and can be used safely for many years. High Efficiency: Ensures consistent production performance in all conditions thanks to advanced heating, mixing, and dosing systems. Environmentally Friendly: Offers environmentally conscious production with bag filter systems featuring low emission values. Easy Transportability: Its modular and compact design allows for easy transport on trucks or trailers. Customer Support: We are with you every step of the way, from pre-sales engineering planning to after-sales technical service. What Do We Do at Constmach? Constmach is a leading machine manufacturer serving the construction and mining industries with a wide range of products. Our product portfolio includes concrete block making machines, stationary and mobile concrete plants, rock crushing machines, rock crushing and screening plants, sand washing machines, sand making machines, asphalt plants, conveyor belt systems, jaw crushers, and mobile crushing plants. With its high quality standards, innovative production approach, and customer-focused solutions, Constmach stands out as a reliable brand in both national and international markets. Our products continue to be the preferred choice of industry professionals due to their durability, efficiency, and long-lasting performance.

Condition: used, Year of construction: 2002, We are offering this used Finnsonic MC-360/III ultrasonic cleaning system, year of manufacture 2002. If you have any questions or require further information, please feel free to send us a message or give us a call. The dimensions of the individual tanks are approximately: width 750 mm x depth 600 mm x height 600 mm. Godpoywua Tofx Adkskd

Condition: new, functionality: fully functional, power: 420 kW (571.04 HP), fuel type: hybrid, color: other, Year of construction: 2026, Equipment: cabin, hydraulics, onboard computer, The CONSTMACH JS-2 mobile crushing plant is designed to efficiently crush low and medium hardness materials such as limestone, river stone, dolomite, and basalt. With its compact design, powerful crusher combination, and mobile ease of use, the JS-2 delivers maximum performance across various production areas. The plant performs the primary crushing process with the CJC-90 jaw crusher, while the CSI-1212 secondary impact crusher in the second stage ensures a perfect cubic-shaped final product. This feature delivers ideal results, particularly for concrete production. The JS-2 is equipped with a vibrating feed bunker, bypass belt, hydraulically supported mobile chassis, PLC-controlled automation system, and optional diesel generator set. The system is easy to install, can be put into production quickly, and can be operated without the need for a crane or loader when required, thanks to its hydraulic opening mechanisms. Furthermore, all components are from reliable brands such as SIEMENS and SCHNEIDER, ensuring long-term use. JS-2 Mobile Crushing and Screening Plant Technical Specifications Production Capacity: 150–200 tph Maximum Feed Size: 900 x 650 mm Feed Height: 5.7 meters Main Configuration: Jaw Crusher + Secondary Impact Crusher + 3-Tier Screen Total Motor Power: 355 kW Electric Generator Requirement: 700 kVA Plant Weight: 80 tons Plant Dimensions: 1. Chassis: 11 x 3.4 x 4.4 m / 2. Chassis: 18 x 3.65 x 4.5 m Chassis Type: Hydraulic folding legs, wheeled dual chassis Why Choose the JS-2 Mobile Crushing Plant? CONSTMACH JS-2 stands out from its competitors with its durability, high efficiency, and portability. Thanks to its advanced automation system, it can be easily controlled by a single operator. High-quality European components offer low maintenance costs and a long service life. Delivering reliable performance in all site conditions, JS-2 will more than pay for your investment for many years to come. For those seeking quality, reliability, and engineering excellence in a mobile crushing plant, CONSTMACH is the right choice. What Do We Do at Constmach? Constmach is a leading machine manufacturer offering a wide range of products tailored to the needs of the construction and mining industries. Our product portfolio includes concrete block making machines, stationary and mobile concrete plants, stone crushing machines, stone crushing and screening plants, sand washing machines, sand making machines, asphalt plants, conveyor belt systems, jaw crushers, and mobile crushing plants. With its high quality standards, innovative production approach, and customer-focused solutions, Constmach stands out as a reliable brand in both national and international markets. Our products continue to be the preferred choice of industry professionals due to their durability, efficiency, and long-lasting performance. Gedpfx Adexqgbyskjkd

Condition: new, functionality: fully functional, power: 400 kW (543.85 HP), fuel type: hybrid, color: other, Year of construction: 2026, Equipment: cabin, hydraulics, onboard computer, CONSTMACHTM PI-2 mobile limestone crushing plant is a high-efficiency crushing solution specially designed for processing materials with low abrasiveness. With its compact design and robust construction, the PI-2 ensures excellent cubic-shaped final products while crushing materials such as limestone at high capacity. The plant is equipped with advanced engineering and can be assembled and put into production in a short time. It offers a complete mobile crushing and screening system with a vibrating feed bunker, CPI-1415 primary impact crusher, multi-layer vibrating screen, and foldable stock belt. The PI-2 mobile limestone crusher can be controlled via a single tablet thanks to its user-friendly automation infrastructure. The PLC system, equipped with SIEMENS and SCHNEIDER brand electronic components, ensures safe and stable operation of the plant. With a production capacity of 250–300 tons/hour, the PI-2 combines the performance of a stationary plant with the flexibility of a mobile structure. When needed, the integration of a diesel generator eliminates the need for external power. With dimensions that comply with international transportation standards, the PI-2 can be easily transported between different construction sites. PI-2 Mobile Limestone Crushing Plant Technical Specifications Gksdpfx Ajxqcq Dsdksd Production Capacity: 250–300 tph Maximum Feed Size: 1,000 x 1,000 mm Feed Height: 4.5 meters Main Configuration: Primary Impact Crusher + Vibrating Deck Screen Total Motor Power: 400 kW Electric Generator Requirement: 1100 kVA Plant Weight: 55 tons Plant Dimensions: 20 (L) x 3.85 (W) x 4.5 (H) meters Chassis Type: Hydraulic opening-legged wheeled single chassis Why Choose the PI-2 Mobile Limestone Crusher? CONSTMACHTM PI-2 offers a long-term investment advantage for businesses with its high performance, portable structure, and user-oriented automation system. Its durable components ensure low maintenance costs and maximum efficiency. Its easy assembly feature saves time, while its high crushing power strengthens your production line. Manufactured exclusively with quality materials and reliable engineering, the PI-2, combined with Constmach's industry experience, offers your business reliability, speed, and guaranteed uninterrupted production. What We Do at Constmach Constmach is a leading machine manufacturer serving the construction and mining industries with a wide range of products tailored to their needs. Our product portfolio includes concrete block making machines, stationary and mobile concrete plants, stone crushing machines, stone crushing and screening plants, sand washing machines, sand making machines, asphalt plants, conveyor belt systems, jaw crushers, and mobile crushing plants. With its high quality standards, innovative production approach, and customer-focused solutions, Constmach stands out as a reliable brand in both national and international markets. Our products continue to be the preferred choice of industry professionals due to their durability, efficiency, and long-lasting performance.

Condition: used, Year of construction: 2015, Length 12000 mm Width 9000 mm Used manual overhead conveyor system with a SCHUKO paint mist extraction unit and a warm-air supply system. Includes a cross-flow heat exchanger (heat recovery) and a manual overhead conveyor; in very good, well-maintained condition. Manufactured 2015–2016. ----- Sold on behalf of a client! The system is still in operation and available for inspection. Price is ex-site; dismantling to be performed by the buyer ((Scissor lift and forklift available on-site)). Group 1: Dry-type paint mist extraction system, model FARBMEISTER: ----- Model FARBMEISTER-25/30, including a stationary paint mist extraction wall with dry-type filtration. Baffle/filter area: H x W 2,790 x 3,140 mm (cardboard filter cells). Features a centrally positioned, solid baffle panel designed to reduce the maximum required airflow, tailored to the specific frames and casements being painted. Includes an additional pull-down pre-filter. This reduces the effective extraction area—and consequently the total airflow—from a standard ~14,000 m³/h to the required 10,500 m³/h. Also includes a 250 mm deep extension around the perimeter (left, right, and top) to improve the capture of overspray. A high-performance centrifugal fan (model L-EX 500) with a 5.0 kW motor, capable of an exhaust air volume of 10,500 m³/h (free-blowing), including all necessary ductwork and components to construct and install the extraction system—extending through the wall to the outside—as well as a manually adjustable exhaust air damper. Group 2: Warm Air/Supply Air System for the Spray Booth: ----- BB 1,100 warm air/supply air system for the spray booth, including a supply air unit (model WZL110-com) equipped with an integrated heating coil (hot water connection, supply temperature +80°C). The unit has an air capacity of 10,500 m³/h and a 5.0 kW motor. The required heating capacity, based on a temperature differential (Delta-T) from -15°C to +22°C, is 137 kW. The system features an automatic louver damper at the air intake to seal off the ductwork and prevent cold air from entering when the system is not in operation. It also includes an explosion-proof warm-air thermostat designed to shut down the system in the event of a loss of heating capacity (hot water supply). This group encompasses all ductwork and supply air components, spanning from the external air intake to the air outlets in the distribution ceiling located above the spray wall. A cross-flow plate heat exchanger for heat recovery from the exhaust air duct leading outdoors, while simultaneously preheating the fresh air drawn in from outside. With an exhaust air temperature of +20°C and a fresh air temperature of -12°C, this results in an energy saving of approximately 58 kW of heating capacity. Includes all necessary duct and pipe components for integrating the exhaust and supply air lines with the plate heat exchanger, in accordance with the attached planning drawing. Also includes a maintenance/repair switch and a differential pressure monitor for supervising the intake filter. Please note that the heat exchanger core must remain easily accessible for routine maintenance and cleaning. Group 3: Electrical System Control for Paint Mist Extraction: Gkodpfx Ads Ahkkheksd ----- Electrical system control for paint mist extraction...

Condition: new, functionality: fully functional, fuel type: electric, Year of construction: 2026, *All of our products are made with care and covered for 1 year warranty! *Installation and Operator Training FREE FABO TURBOMIX FULL AUTOMATIC MOBILE CONCRETE BATCHING PLANTS are ideal solutions for the projects that require short term and a compacted settlement on a dedicated job site. Since all the equipment of a concrete plant is assembled on a single mobile chassis, the plant can be moved easily by only one truck. Productivity of TURBOMIX mobile concrete plants vary from 30 m3/h to 150 m3/h. FABO TURBOMIX series of mobile concrete batching plants have automatic control, static/dynamic Load Cell Weighing of aggregate materials and additives. Concrete plants have qualitative and strong concrete mixer, which provides high capacity homogeneous mixture. TECHNICAL SPECIFICATIONS: Model: TURBOMIX 100 Production capacity: 100 m3 Dimensions (length x width x height): 16300 x 3200 x 4500 mm Mixer type: Twinshaft – 2.3 m3 Aggregate bunker: 4x15 m3 Transfer conveyor: 6250 kg Cement weighing: 1000 kg Additives weighing: 40 kg Water weighing: 700 lt Total weight: 27550 kg Total motor power: 105 kW Cement silo is optional. Turbomix 100 consists of: • Aggregate Storage Hopper • Aggregate Weighing Hopper • Aggregate Transfer Conveyor • Twinshaft Mixer • Mixer Chassis, Walking Platforms, Ladder • Water Weighing Hopper Gsdo Ahx Tmopfx Adkekd • Cement Weighing Hopper • Admixture Weighing Hopper • Air Compressor • Cement Screw Conveyor • Bolted Cement Silo • Top Filter, Safety Valve and Accessories • Control Cabinnet • PC and Automation System • Control and Power Panel FOR FURTHER INFORMATION PLEASE FEEL FREE TO CALL US!!!

Condition: new, functionality: fully functional, power: 170 kW (231.14 HP), fuel type: hybrid, color: other, Year of construction: 2026, Equipment: cabin, CONSTMACH V-70 mobile vertical shaft impact crusher, also known as the mobile sand making machine, is a high-efficiency mobile crushing and screening plant specifically designed for the production of high-quality fine aggregate. It delivers superior performance, particularly in the production of perfectly cubic sand with a grain size of 0-5 mm. Thanks to its advanced engineering, durable components, and long-lasting design, it offers maximum efficiency in different rock types of varying hardness, such as granite, basalt, dolomite, gabbro, and limestone. The V-70 model can directly process natural stones up to 35 mm in size, as well as materials obtained from primary or secondary crushing processes. With a production capacity ranging from 100 to 150 tons per hour, it can simultaneously produce 0-5 mm sand and three different aggregate fractions. Thanks to its user-friendly hydraulic-mounted mobile chassis, the plant is ready for operation in just a few hours at the installation site. The automation system is equipped with SIEMENS and SCHNEIDER electronic components, allowing all operations to be easily managed from a single tablet. Thanks to its compact design, the V-70 complies with international road transport standards and can be quickly transported to different construction sites using a king-pin-connected tractor. The system can also be equipped with an optional diesel generator, allowing for independent operation in areas where energy is needed. V-70 Mobile Vertical Shaft Crusher Technical Specifications Production Capacity: 100-150 tph Maximum Feed Size: 35 mm Feed Height: 4.5 meters Main Configuration: VSI Crusher + Vibrating Screen Total Motor Power: 170 kW Gkedpfsxpxcysx Adksd Electric Generator Requirement: 400 kVA Plant Weight: 32 tons Plant Dimensions: 17.8 (L) x 3.35 (W) x 4.3 (H) meters Chassis Type: Single chassis with wheels equipped with hydraulic legs Why Choose the V-70 Mobile Vertical Shaft Impact Crusher? CONSTMACH V-70 offers maximum efficiency, low maintenance costs, and superior quality in rock crushing and sand production. Its compact design makes it easy to transport, and its automation system requires minimal operator intervention. Its long-lasting components, high-performance VSI crusher system, and energy efficiency ensure the highest return on your investment. Manufactured with the CONSTMACH guarantee, the V-70 stands out in the industry with its durability, performance, and after-sales technical support. If you are looking for a reliable, fast, and economical solution for quality sand production, the V-70 is the right choice for you. What Do We Do at Constmach? Constmach is a leading machine manufacturer serving the construction and mining industries with a wide range of products. Our product portfolio includes concrete block making machines, stationary and mobile concrete plants, stone crushing machines, stone crushing and screening plants, sand washing machines, sand making machines, asphalt plants, conveyor belt systems, jaw crushers, and mobile crushing plants. With its high quality standards, innovative production approach, and customer-focused solutions, Constmach stands out as a reliable brand in both national and international markets. Our products continue to be the preferred choice of industry professionals due to their durability, efficiency, and long-lasting performance.

Condition: new, Year of construction: 2025, STATIONARY CONCRETE BATCHING PLANT S130-TWN GENERAL Plant Type : Stationary Concrete Plant with TWIN Shaft Mixer Plant Capacity : 130m³/hour freshly compressed concrete Mixer Capacity : 4500/3000 lt (3m³ Compressed Concrete) Total Motor Power : 168kw Standard Value can be changed depending on Equipment.. Voltage/Frequency : 380V/50Hz Standard Value. The installation and startup of the plant is under our responsibility. We provide excellent after-sales service. 24/7 SERVICES. REMOTE CONTROL SERVICE. Exporting more than 1000 Concrete Batching Plants to more than 90 Countries all over the world. * HIGHLY EFFICIENT AND DUPLICATE PRODUCTION Gkedpfx Asflz Idodkod * EASY MAINTENANCE * SUITABLE TO WORK UNDER HARD CONDITIONS * ABLE TO PRODUCE RCC CONCRETE DETAILS: Compacted concrete capacity : 130 m³/h Air Compressor Capacity : 1300 lt/min Aggregate Hopper : 4 Bins:4×30 = 120m³ Mixer Type : TWIN Shaft (3m³). 4500/3000 lt capacity Aggregate Conveyor Band : 1000 mm * 32000 mm Weighbridges: Aggregate/ Cement /Water/ Additives OPTIONS: *Cement Silo: 75-100-150-200-500 tons *Cement Silo Equipment and Screw Conveyor. Central Lubrication System Brand : ILC (made in italy) Mixer body Plates : Manganese (it can manufacture 50.000m3-450.000m3) Mixer Internal Linings (Wear Plates) : Ni- hard special hard cast material Discharging in Emergency Situations : manual Emergency Situation hand pump Emergency Stop Button available. Digital Mixer Control System (alarm) Automatic lubrication system monitor feature on pc Control System: Full automatic pc - plc – printer. Unlimited users Remote access Unlimited prescriptions and customer registration Retrospective reporting English- Russian- French- Arabic-German-Spanish languages are available. Switching materials used in the MCC dashboard are SIEMENS Back off available.

Condition: new, functionality: fully functional, fuel type: electric, Year of construction: 2026, *All of our products are made with care and covered for 1 year warranty! *Installation and Operator Training FREE MEET OUR NEW INNOVATION MINIMIX-30! In this period when many products are mobilized and cost items are underestimated due to the current era, we continue to offer solution-oriented projects to our customers' concerns. As FABO Company, to reduce investment costs of our clients and provide them with quality service, we offer our new innovative MiniMix-30 model with affordable prices, which can be shipped by only one container. This plant, which is constructed completely by new parts on a new platform, has an economic structure and can be used to produce concrete mixture according to international standards on projects which require fairly moderate amount of concrete. Advantages of Mobile Minimix Concrete Batching Plant; - Cost effective shipping to overseas with 1 x 40 ft OT Container along with all its equipment’s - Minimizing installation area of the plant - Transportable by towing on roads - Can be installed, re-installed and transported in a very short period of time. - Ready Concrete Mixture conveyed by feeding conveyor to concrete mixing truck - According to the amount of the used concrete can be used Big Bag or small Bolted Silo - By complete automatic system can be produced homogeneous concrete Minimix model plant consists of following parts: - 4 x 5m3 Aggregate Bunker - 1m3 Aggregate Weighing Hopper - 600 x 4250mm Aggregate transfer conveyor Gjdpfo Akdfmsx Adkskd - 600 x 12000mm Ready mixture transfer conveyor - 0.5m3 Pan Mixer - 300 kg Cement Weighing Hopper - 200 lt Water Weighing Hopper - 20 kg Admixture Weighing Hopper - 300 lt Air compressor - Optionally, Big Bag Blasting or 30 Ton Bolted Silo - Electrical switchboard consisting of Siemens switchgear - PLC Automation System Production capacity: 30 m3 FOR FURTHER INFORMATION, PLEASE FEEL FREE TO CALL US!!!

Condition: new, functionality: fully functional, fuel type: electric, Year of construction: 2026, *All of our products are made with care and covered for 1 year warranty! *Installation and Operator Training FREE COMPACT series Stationary Concrete Batching Plants provide satisfaction of all levels need with practical and effective solutions. Stationary concrete batching plants can easily and efficiently reach high capacity production of homogeneous concrete mixture. COMPACT series have easy operating system and lowest investment costs. In addition, the plant provides the use of enterprise resources accurately, so that gaining time-saving will transform to more earnings. TECHNICAL SPECIFICATIONS: Model: COMPACT 60 Production capacity: 60 m3 Mixer type: Twinshaft mixer 1 m3 Cement weighing: 600 kg Additives weighing: 30 kg Water weighing: 250 kg Cement silo is optional. COMPACT-60 consists of: • Aggregate Storage Bunker • Aggregate Weighing Hopper • Aggregate Weighing Conveyor • Aggregate Transfer Conveyor or Bucket System • Twinshaft Mixer • Mixer Chassis, Walking Platforms, Ladder • Water Weighing Hopper • Cement Weighing Hopper • Admixture Weighing Hopper • Air Compressor • Cement Screw Conveyor Gjdpj Ahx U Djfx Adkekd • Bolted Cement Silo • Top Filter, Safety Valve and Accessories • Control Cabinnet with Air Conditioner • PC and Automation System • Control and Power Panel FOR FURTHER INFORMATION PLEASE FEEL FREE TO CALL US!!!

Condition: new, Year of construction: 2025, Plant Type : STATIONARY Concrete Batching Plant with TWIN SHAFT MIXER Plant Capacity: 100m³/ hour freshly compressed concrete Mixer Capacity: 3000/2000 lt (2m³ Compressed Concrete) Central Lubrication System Brand : ILC (made in Italy) Control System: Full automatic pc - plc – printer. Electronical equipment : Siemens Other equipment & accessories : Italian Unlimited users & Remote access The installation and startup of the plant is under our responsibility. 7/24 SERVICES. Exporting more than 1000 Concrete Batching Plants to more than 90 Countries. * HIGHLY EFFICIENT AND DUPLICATE PRODUCTION * EASY MAINTENANCE * SUITABLE TO WORK UNDER HARD CONDITIONS OPTIONS: *Cement Silo: 75-100-150-200-500 tons *Cement Silo Equipment and Screw Conveyor. Central Lubrication System Brand : ILC (made in italy) Mixer body Plates : Manganese (it can manufacture 50.000m3-450.000m3) Mixer Internal Linings (Wear Plates) : Ni- hard special hard cast material Discharging in Emergency Situations : manual Emergency Situation hand pump Godpfx Ajflz H Dsdkokd Emergency Stop Button available. Digital Mixer Control System (alarm) Automatic lubrication system monitor feature on pc Control System: Full automatic pc - plc – printer. Unlimited users Remote access Unlimited prescriptions and customer registration Retrospective reporting English- Italian- French-German-Spanish- Arabic-Russian languages are available. Switching materials used in the MCC dashboard are SIEMENS Back off available.

Condition: used, Year of construction: 2016, Bread production line WP Haton consisting of: - WP Haton V300 weighing machine - WP Haton BIP-72-M fermentation cabinet Gjdpfx Aj Ahwpbodkokd - WP Haton conical shaping machine

Condition: new, functionality: fully functional, fuel type: electric, Year of construction: 2026, *All of our products are made with care and covered for 1 year warranty! *Installation and Operator Training FREE COMPACT series Stationary Concrete Batching Plants provide satisfaction of all levels need with practical and effective solutions. Stationary concrete batching plants can easily and efficiently reach high capacity production of homogeneous concrete mixture. COMPACT series have easy operating system and lowest investment costs. In addition, the plant provides the use of enterprise resources accurately, so that gaining time-saving will transform to more earnings. TECHNICAL SPECIFICATIONS: Model: COMPACT 60 Production capacity: 60 m3 Mixer type: Twinshaft mixer 1 m3 Cement weighing: 600 kg Additives weighing: 30 kg Water weighing: 250 kg Cement silo is optional. COMPACT-60 consists of: • Aggregate Storage Bunker • Aggregate Weighing Hopper • Aggregate Weighing Conveyor • Aggregate Transfer Conveyor or Bucket System • Twinshaft Mixer • Mixer Chassis, Walking Platforms, Ladder Godpfx Ao Akdd Ejdkjkd • Water Weighing Hopper • Cement Weighing Hopper • Admixture Weighing Hopper • Air Compressor • Cement Screw Conveyor • Bolted Cement Silo • Top Filter, Safety Valve and Accessories • Control Cabinnet with Air Conditioner • PC and Automation System • Control and Power Panel FOR FURTHER INFORMATION PLEASE FEEL FREE TO CALL US!!!

Condition: new, functionality: fully functional, power: 250 kW (339.91 HP), fuel type: electric, color: dark red, Year of construction: 2026, GNR 03 Mobile Lime Stone Crusher and Screening Plant has a capacity of 250 / 350 TPH. It can easily break stones of different hardness. Complies with international shipping standards. Installation and commissioning is done in a short time. Local workers (staff) are taught how to control. Lifetime spare parts support is provided. OPTIONAL - By-pass system - Magnetic magnet - Generator System - Dust Removal System - Frequency Control System is used instead of soft starter Gkjdpfownqfgsx Adked - Control cabin and air conditioning Please call us for our other crushing plants and customized solutions.

Condition: new, functionality: fully functional, power: 300 kW (407.89 HP), overall weight: 65,000 kg, tire size: 6*2, tire condition: 100 %, drive condition: 100 %, chain condition: 100 %, axle configuration: 3 axles, emission class: euro3, Year of construction: 2026, machine/vehicle number: V9638J96, Equipment: all wheel drive, hydraulics, onboard computer, Sand and Gravel Production Plant | MINGYUAN Heavy Industrial Equipment A sand and gravel production plant is an integrated system designed for producing high-quality construction aggregates, including sand, gravel, crushed stone, and artificial sand. MINGYUAN provides complete aggregate crushing and screening solutions for quarries, mining, construction, and infrastructure projects, ensuring efficient material processing and consistent output. General Introduction Gkedpfxoq Nia Io Adksd The MINGYUAN sand and gravel production line combines advanced crushing, screening, washing, and conveying equipment to process raw materials such as limestone, granite, basalt, river stone, and quartz into various sizes of construction sand and gravel aggregates. The plant typically includes jaw crushers, impact crushers, cone crushers, vibrating screens, sand washers, belt conveyors, and dust collectors, forming a complete and automated production system. It is widely used in road construction, concrete batching plants, building materials, and hydropower projects. Capacity range: 30–1000 tons per hour (customizable) Feed size: ≤800 mm depending on crusher type Output size: 0–5 mm (sand), 5–10 mm, 10–20 mm, 20–40 mm (gravel) Main equipment: Jaw crusher (PE/PEX series), cone crusher, impact crusher, VSI sand maker, vibrating feeder, vibrating screen, sand washing machine, belt conveyor, and control system Power configuration: Electric or diesel-driven options available Automation: PLC control with real-time monitoring and adjustable output ratio MINGYUAN Heavy Industrial Equipment Co., Ltd. provides complete sand and gravel production solutions with reliable performance, competitive price, and professional after-sales service for global customers in the mining, construction, and cement industries. 2. Crushing and Screening: - The extracted raw materials often need to go through crushing and screening processes to reduce their size and separate them into different grades. - Crushers break down large rocks into smaller pieces, and screens sort the particles based on size. 3. Washing: - Washing is a common process to remove impurities such as clay, silt, and dust from the raw materials. This is particularly important for sand and gravel used in construction. 4. Grading and Sorting: - After washing, the materials may go through grading and sorting processes to separate them into different sizes and qualities. 5. Storage and Stockpiling: - Processed materials are often stored in stockpiles for further use. Adequate storage facilities are necessary to manage different grades of materials. 6. Conveying and Transportation: - Conveyor systems are used to transport materials between different stages of the production process. Transportation methods, such as trucks or conveyor belts, are used to move the final products to distribution points. Keywords Sand production line, gravel production plant, aggregate crushing plant, stone crusher, sand making machine, sand washer, vibrating screen, jaw crusher, cone crusher, impact crusher, VSI crusher, quarry equipment, mining machinery, construction aggregates, artificial sand, crushed stone, river gravel, limestone crusher, basalt crusher, granite crusher, sand washing plant, screening plant, conveyor system, MINGYUAN sand plant, aggregate processing equipment, stone crushing line, sand and gravel washing system, high-efficiency crusher, environmental sand plant, aggregate production line manufacturer.

Condition: excellent (used), Year of construction: 2019, VIDALI painting system Spray booth with overhead conveyor in very good condition More pictures available upon request. Gedpfx Adozx Rxxskjkd

Condition: new, functionality: fully functional, fuel type: electric, Year of construction: 2026, *All of our products are made with care and covered for 1 year warranty! *Installation and Operator Training FREE COMPACT series Stationary Concrete Batching Plants provide satisfaction of all levels need with practical and effective solutions. Stationary concrete batching plants can easily and efficiently reach high capacity production of homogeneous concrete mixture. COMPACT series have easy operating system and lowest investment costs. In addition, the plant provides the use of enterprise resources accurately, so that gaining time-saving will transform to more earnings. TECHNICAL SPECIFICATIONS: Model: COMPACT 60 Production capacity: 60 m3 Mixer type: Twinshaft mixer 1 m3 Cement weighing: 600 kg Additives weighing: 30 kg Water weighing: 250 kg Cement silo is optional. COMPACT-60 consists of: • Aggregate Storage Bunker • Aggregate Weighing Hopper • Aggregate Weighing Conveyor • Aggregate Transfer Conveyor or Bucket System • Twinshaft Mixer • Mixer Chassis, Walking Platforms, Ladder • Water Weighing Hopper • Cement Weighing Hopper Gsdpfx Adj Ahn A Sjkskd • Admixture Weighing Hopper • Air Compressor • Cement Screw Conveyor • Bolted Cement Silo • Top Filter, Safety Valve and Accessories • Control Cabinnet with Air Conditioner • PC and Automation System • Control and Power Panel FOR FURTHER INFORMATION PLEASE FEEL FREE TO CALL US!!!