Used Angle Drill for sale (10,681)

Condition: used, pneumatic corner drill, compressed air drill, compressed air angle drill, corner drill -Manufacturer: Chicago Pneumatic, pneumatic angle drill -Type: CP-0323-TANAR -Operating pressure: 6.2 bar max. -Speed: 175 rpm -Dimensions: 790/260/H110 mm Nodpfx Ahelw Az Ao Rjkw -Weight: 11 kg

Condition: good (used), Cordless angle drill, cordless angle drill, -Manufacturer: Bosch, cordless drill type GWB 7.2 VE Nsdpfow Iftqex Ah Rekw -incl.: charger -Quantity: 1x drill driver available -Price: per piece -Transport dimensions: 240/180/H240 mm -Weight: 6 kg

Condition: excellent (used), Year of construction: 2009, MC HSK 63 F angle unit for angled drilling below 7 degrees Excellent condition See photos Location: from stock, 54634 Bitburg Nkjdpfewmr Uyex Ah Rsw - available immediately -

Year of construction: 2001, condition: like new (used), functionality: fully functional, machine/vehicle number: 1382434, From our demonstration tool inventory, tested and fully functional: new Desoutter D315-S-1050 compressed air 45° angle drill with trigger start Power: 280 W Torque: 10 Nm Idle speed: 1050 min-1 Nsdpfxjv Inwzo Ah Rokw Length: 280 mm Weight: 0.84 kg Other tools for industrial production and maintenance on request.

Year of construction: 2004, condition: like new (used), functionality: fully functional, machine/vehicle number: 1462064, From our demonstration tool inventory, tested and fully functional: new Desoutter F32-L-1200C compressed air 90° angle drill with lever start Collet: 4.8 mm Power: 375 W / 0.50 Hp Idle speed: 1200 min-1 Length: 285 mm Weight: 1.15 kg Other tools for industrial production and maintenance on request. Nsdpfxsv Inypj Ah Rokw

Year of construction: 2002, condition: used, functionality: fully functional, Machine for cutting aluminium and copper pipes with the option for pipe end processing. Nkodpfx Aeyt Sppjh Row

Year of construction: 2002, condition: used, functionality: fully functional, Machine for straight cutting of aluminium and copper tubes. Nksdeyt Spcepfx Ah Rew

Condition: used, (15) Angle plates as detailed. 112779 600mm x 500mm 1800mm Angle Plate 112780 600mm x 500mm 1800mm Angle Plate 112781 600mm x 500mm 1800mm Angle Plate Njdpfxjyi Tbfs Ah Rskw 112782 910mm x 700mm x 1800mm Angle Plate 112783 840mm x 690mm x 3370mm Angle Plate Fitted with cranked riser block allowing movement of top angle plate. 112784 1020mm x 1010mm x 4480mm Angle Plate Fitted with cranked riser block allowing movement of top angle plate. 112785 1020mm x 1010mm x 4480mm Angle Plate Fitted with cranked riser block allowing movement of top angle plate. 112786 900mm x 600mm x 3000mm Angle Plate 112787 1020mm x 1010mm x 4280mm Angle Plate 112789 800mm x 750mm x 1190mm Angle Plate 112791 600mm x 500mm 1800mm Angle Plate

Condition: not inspected (used), Year of construction: 1986, functionality: unexamined, machine/vehicle number: 7393, travel distance X-axis: 500 mm, travel distance Y-axis: 360 mm, travel distance Z-axis: 400 mm, rotational speed (max.): 4,000 rpm, controller model: Siemens 810, No reserve price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Njdpfeyv A A Hex Ah Rekw Travel X-axis: 500 mm Travel Y-axis: 360 mm Travel Z-axis: 400 mm Spindle speed range: 20 – 4,000 rpm Table size: 800 x 390 mm Feed rate range: 1 – 2,000 mm/min Rapid traverse: 5 m/min Number of T-slots: 6 T-slot width: 14 mm T-slot spacing: 63 mm Tool holder: SK 40 Number of gear steps: 4 MACHINE DETAILS Control system: Siemens 810 Total power requirement: 9 kW Dimensions & Weight Space requirements (L x W x H): approx. 2,500 x 2,900 x 1,900 mm Machine weight: approx. 2,000 kg

Condition: ready for operation (used), Year of construction: 1999, functionality: fully functional, travel distance X-axis: 500 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 400 mm, rotational speed (max.): 4,500 rpm, controller model: Heidenhain TNC 310, TECHNICAL DETAILS X-axis travel: 500 mm Y-axis travel: 400 mm Z-axis travel: 400 mm Tool holder: SK 40 Spindle speeds: 20-4500 rpm MACHINE DETAILS Control: Heidenhain TNC 310 Dimensions & Weight Space requirements: approx. 2.15 x 2.00 x 2.50 m Machine weight: approx. 3 t Nsdpoywgtxsfx Ah Rjkw EQUIPMENT Swivelling rotary table Documentation

Year of construction: 2013, operating hours: 200 h, condition: good (used), functionality: limited functionality, General Characteristics of KALTENBACH Equipment 1. Drilling / Profile & Plate Processing Machines Function: Precise drilling of steel profiles and plates, threading, countersinking, and marking. Suitable for pipes, profiles, and plates with complex hole patterns. Features: - CNC control for high precision. - Automatic tool changer for multiple operations. - Servo motors and ball screws ensure accuracy. - Multi-axis spindle for flexible operation. Purpose: Preparation of holes and welding points in metal structures. 2. Cutting / Band Saws and Saw Lines Function: Straight and mitre (angled) cutting of steel profiles, tubes, and plates. Features: - Band saws or circular saws. - Mitre cutting capability. - Automated conveyor systems for efficient material handling. Purpose: Production of structural elements and construction parts. 3. Shot Blasting Systems Function: Removal of rust, scale, and contaminants from metal surfaces. Features: - High-speed shot blasting turbines. - Configurations for profiles, tubes, and plates. - Robust construction for continuous, high-throughput operation. Purpose: Surface preparation before cutting and painting. 4. Painting and Surface Treatment Systems Function: Application of primer and top coats to protect metal surfaces and enhance appearance. Features: - Painting booths and robotic spray systems. - Integrated drying units. - Conveyor and transfer systems for continuous workflow (blasting → painting → drying). Purpose: Corrosion protection and achieving a professional surface finish. Nksdpoyrfv Tefx Ah Rjw Overall Characteristics - Modular and customizable system configurations. - CNC control and automation enhance productivity and precision. - High throughput and industrial-grade accuracy. - Complete production line integration: cutting → blasting → painting.

Condition: new, Year of construction: 2022, feed rate X-axis: 20 m/min, feed rate Y-axis: 20 m/min, feed rate Z-axis: 15 m/min, overall weight: 7,400 kg, spindle speed (min.): 4,000 rpm, spindle speed (max.): 10 rpm, travel distance Y-axis: 1,500 mm, power: 22 kW (29.91 HP), DYAS Plate Drilling Center - DYAS PDC-1500 Njdogbfaxopfx Ah Rokw Number of Drilling Units 1 Vertical Motor Power 22 kW Spindle Torque 280 Nm Spindle Speed 10-4000 RPM Automatic Tool Changing (ATC) 16 Units Maximum material weight 760 kg Max. Max. Drilling Capacity (mm) Ø40 mm

Condition: new, Year of construction: 2024, feed rate X-axis: 25 m/min, feed rate Y-axis: 25 m/min, feed rate Z-axis: 25 m/min, total length: 7,600 mm, total height: 3,000 mm, total width: 2,650 mm, overall weight: 14,000 kg, spindle speed (min.): 50 rpm, spindle speed (max.): 4,000 rpm, DYAS 3 BDC CNC Beam Profile Machining Center Operating Range for Section Min. 200 x 80 mm / Max. 1200 x 500 m Operating Range for Length Min. 2000 mm / Max. 12000 mm (Gross: 12500 mm ) Drilling Head (Spindle) 3 Spindle Speed 50-4000 (stepless) rpm Spindle Power 22 Kw Njdpfxjgbdpke Ah Rskw Spindle Torque 280 Nm Tool Changer 6 for each spindle , total 18 Tapping Capacity M10-M30 Bandsaw (Optional) Cutting Speed 20-100 m/min / Mitering Angle +60°/-45°

Condition: good (used), Nagel Citoborma 290AB Paper Drill The machine is 100% functional and ready to use. Robust construction – weighs 200 kg. This is the current Citoborma drill model in production. 400V power supply. Two drilling heads with adjustable spacing ranging from 45-170 mm. Drill diameter: 2-20 mm. Stack height: 60 mm. Controlled by an electric foot pedal. Waste is directed to an external sleeve. Nedpfxeywdqzj Ah Rjkw The drill table is adjustable in every direction (sides, front/back) and has stops for setting the drill spacing (non-standard drilling). Additionally, a special module for standard spacings is installed in the table. Furthermore, the table has two movable margins. The drill has an automatically released table lock after each cycle, allowing the table to be moved to the next position. The set includes drills, tools and instructions.

Condition: good (used), Nagel Citoborma 490 Paper Drill This is the largest Citoborma drill currently in production. Nksdpfoywdn Tsx Ah Row Very good condition, ready for production. The machine has 4 drilling heads. Drilling waste is discharged into a basket located at the rear of the machine. The machine is operated using a foot pedal or two-handed buttons. Each head has a separate up/down adjustment, allowing for the use of drill bits of different lengths. The set includes spare drill bits, tools, and an instruction manual. Technical specifications: Number of drilling heads: 4 (each head can be quickly removed) Maximum stack height: 60 mm Drill bit size: 2-10 mm Adjustable spacing: 45 – 425 mm Two drilling speeds 380V power supply Weight: 365 kg Made in Germany.

Condition: good (used), Nagel Citoborma 480AB Paper Drill This machine is in very good condition. It has four drilling heads. Technical specifications: Drill bit distance: 45-285 mm Drill diameter: 2-20 mm Stack height: 60 mm Weight: 275 kg Nsdpfx Ajywdmpeh Rekw Automatic drilling cycle, controlled by a foot pedal and manual buttons. Sturdy construction on a pedestal. The drill table is adjustable in all planes. This is one of the newest Citoborma models. Includes operating tools, instructions, and a new cutting stick and drill bits.

Condition: good (used), Drilling machine for window lock and hinge holes. Set composed of two machines. Price €600. Nkodpfx Aoyw R Rush Rsw

Condition: excellent (used), Catalogue number 7945 TECHNICAL DETAILS - Number of spindles: 21 pcs - Distance between outermost spindles: 640 mm - Spindle pitch: 32 mm - Pneumatic clamps: 2 pcs - Table surface dimensions: 890x380 mm Nkedpfxeywth No Ah Row - Height to table surface: 890 mm - Feed cylinder stroke (drilling depth adjustment): 70 mm - Drilling speed adjustable pneumatically - Drilling angle adjustable pneumatically - Main motor: 1.5 kW - Side fences and stop: 1500 mm - Compressed air requirement: 6-8 bar - Dimensions (L/W/H): 1000x1540x1340 mm – weight: 282 kg ADVANTAGES – Austrian-made – 21 spindles – quick-change drill chuck system – Drilling vertically, horizontally, and at an angle – unpainted – Used drilling machine in very good condition Net price: 11,900 PLN Net price: 2,830 EUR based on an exchange rate of 4.2 EUR (Prices may change with larger exchange rate fluctuations)

Condition: used, Year of construction: 2007, functionality: fully functional, Controller NCT104 (Made in Hungary) Table dimensions 1800 x 1800 mm X-axis travel 3500 mm Nsdpfxsyvuh Ij Ah Rokw Y-axis travel 1200 mm Z-axis travel 1500 mm W-axis travel 570 mm Spindle diameter 130 mm Table rotates via CNC program Spindle taper SK50 Weight 32 000 kgs Dimensions L x W x H = 6700 x 6000 x 4420 mm

Condition: used, machine/vehicle number: 008372, X axis working area: 4140 mm Y axis working area: 1850 mm Working Table: Pod and Rail Main Electrospindle power: 13 KW Number of controlled axes: 5 axes Maximum edge height: 65 mm Total number of drilling spindles: 23 Total number of tool changer positions: 18 Nkjdpfx Asylixljh Rjw

Condition: good (used), Nagel Citoborma 111 Paper Drill This machine is 100% functional and in very good condition. The drill table is adjustable in all directions (sides, front/back). It has stops for setting the drilling spacing. Sturdy construction – weighs 35 kg. This is one of the newest Citoborma drill models, currently in production. 230V power supply Drill bit diameter: 2-9 mm Nksdpsyur E Hefx Ah Rjw Stack height: 50 mm Includes drill bits, a new cutting stick, and instructions. Made in Germany.

Condition: new, 20 mm 40 mm MK 4 spindle stroke 160 mm throat 300 mm column diameter 145 mm 615x430 mm 2x14x224 mm distance spindle /table 147/688 mm feed 0,1-0,2-0,3-0,4 mm/U 140-4000 U/min. total power requirement 4,0 kW Machine height 1885 mm Standard equipment: Nkedpfxsyv Nxbs Ah Rjw - Electromagnetic feed clutch with overload protection and electrical    Cross Handle Switches - Control and light transformer - Main switch lockable - Mushroom pushbutton (latching) for EMERGENCY STOP in the front panel - Clockwise rotation by contactor control - Speed adjustment stepless - Speed display digital - Speed setting electrically - Protection IP 54 - Motor insulation class "F" - Spindle protection with electrical protection

Condition: new, 14 mm M 10 MK 2 230-4.000 U/min. spindle stroke 80 mm throat 190 mm column diameter 65 mm 300x240 mm 2 x 12 x 80 mm 75/357 mm 300x240 mm 2 x 12 x 80 mm 437/437 mm feed von Hand Handkurbel Machine height 825 mm total power requirement 0,7 kW weight 93 kg Standard equipment: 5" TFT LCD display with touch function: Manual input of spindle speed setpoint setpoint, actual speed display, integrated drilling depth display with touch zero point transfer, virtual drilling depth scale in the display, machine status status indicators and warnings on the display, Service information, Selectable operator language operator language: DE/EN/FR/ES/IT/NL/RU. - AC motor 230 Volt, 50 Hz - Connection plug ready fitted, cable length 3 m - Infinitely variable speed adjustment via potentiometer - Three separate buttons for clockwise rotation - anticlockwise rotation - stop (spindle stop due to brake function) Njdpfx Aoyv Nqdsh Rekw - Spindle protection with electrical fuse - Mushroom pushbutton (latching) for EMERGENCY STOP - Main switch, lockable - Control voltage 24 Volt - Protection class IP 54 - Paint finish: DD textured paint signal white RAL 9003, PANTONE 7545c, black Item 37.6 MAXIMUM DRILLING DEPTH DISPLAY as a measuring function for the current drilling depth

Condition: new, 32 mm bore stroke 125 mm Nkedpfx Asyv Npgeh Row Short spindle MK 3 throat 210 mm Machine table - usable table surface 390x390 mm table load 65 kg spindle turning speed range 150-2.500 UpM Power requirement 16 A total power requirement 1,5 kW Overall size 750x450x1745 mm weight of the machine ca. 187 kg Standard equipment: - Stepless speed adjustment - Coolant device in the machine base - Movable LED machine light - Swivel work table with integrated machine vice on the opposite side opposite side with jaw width 120 mm - Mains cable and plug ready for immediate use - Drilling table adjustable via gear rack - Depth stop with scale - Emergency stop - According to current CE conformity

Condition: new, 16 mm M 12 MK 2 100-2.000 U/min. spindle stroke 80 mm throat 190 mm column diameter 65 mm 300x240 mm 2 x 12 x 80 mm 75/357 mm 300x240 mm 2 x 12 x 80 mm 437/437 mm feed von Hand Handkurbel Machine height 825 mm total power requirement 0,7 kW weight 93 kg Standard equipment: 5" TFT LCD display with touch function: Manual input of spindle speed setpoint, speed display actual value, integrated drilling depth display with touch function. setpoint, actual speed display, integrated drilling depth display with touch zero point transfer, virtual drilling depth scale in the display, machine status status indicators and warnings on the display, Service information, Selectable operator language operator language: DE/EN/FR/ES/IT/NL/RU. - AC motor 230 Volt, 50 Hz - Connection plug ready fitted, cable length 3 m Nkjdpfx Aheyv Nn Ne Rjw - Infinitely variable speed adjustment via potentiometer - Three separate buttons for clockwise rotation - anticlockwise rotation - stop (spindle stop due to brake function) - Spindle protection with electrical fuse - Mushroom pushbutton (latching) for EMERGENCY STOP - Main switch, lockable - Control voltage 24 Volt - Protection class IP 54 - Paint finish: DD textured paint signal white RAL 9003, PANTONE 7545c, black Item 37.6 MAXIMUM DRILLING DEPTH DISPLAY as a measuring function for the current drilling depth