Used Hand Angle Grinder for sale (14,648)

Condition: used, Throughput depending on material type, speed, and cutting set Capacity: up to 2.500 kg/h Main motor power: 10 KW / 15 KW Pgodpfxjhzcabe Alhen Power supply: 380 V, 50 Hz Dimensions of the machine in cm: Width: 110 Lenght: 90 Height: 125 Delivery time: 5 working days after advanced payment

Condition: used, Throughput depending on material type, speed, and cutting set Capacity: up to 4.000 kg/h Pedpfxou H Af Ue Alhegn Main motor power: 10KW / 15 KW Power supply: 380 V, 50 Hz Dimensions of the machine in cm: Width: 110 Lenght: 90 Height: 115

Condition: like new (used), Throughput depending on material type, speed, and cutting set Capacity: up to 4.000 kg/h Main motor power: 10KW / 15 KW Power supply: 380 V, 50 Hz Dimensions of the machine in cm: Width: 110 Lenght: 90 Height: 115 Psdpfx Ajd S U E Relhogn Delivery time: 10 working days after advanced payment

Condition: used, Throughput depending on material type, speed, and cutting set Capacity: up to 1.600 kg/h Main motor power: 5.5 KW Power supply: 380 V, 50 Hz Dimensions of the machine in cm: Pgedpfxohwtpae Alhjn Width: 100 Lenght: 70 Height: 210 Delivery time: 10 working days after advanced payment

Condition: excellent (used), CATALOG NUMBER 7854 Technical data: - belt length: 2515x152 mm - belt width: 150 mm - oscillation - vertical oscillation movement - sanding length: 790 mm - table size: 840x300 mm - worktable for contoured elements: 300x250 mm - worktable adjustment: 80 mm - motor: 2.2 kW - sanding unit adjustable angle: 90-45 degrees - sanding head adjustment: 0-45 degrees - extraction port diameter: 100 mm - dimensions (length/width/height): 1450/600/1230 mm - weight: 138 kg Pgjdpfjzfpnrsx Alhjn ADVANTAGES – with oscillation – with shoe – suitable for contour and straight sanding – unit can operate vertically and horizontally – unpainted – used sander, very good condition Net price: 3,900 PLN Net price: 930 EUR (depending on the 4.2 EUR rate) (Prices may change with higher fluctuations)

Condition: good (used), I sell Fein MSfv 649 Angle grinder with long neck. In bdb condition Psdpfx Aljuhm I Hohsgn

Year of construction: 2026, operating hours: 1 h, condition: as good as new (ex-display), functionality: fully functional, total length: 326 mm, total height: 119 mm, air pressure: 6 bar, spindle motor power: 1,500 W, spindle nose: 5/8, tool weight: 3,500 g, We offer this demonstration machine: ATA RA6AVH angle grinder, 230mm (7") disc, manufactured in 2026. Manufacturer: ATA Model: RA6AVH Year of manufacture: 2026 Pgsdpfozcuy Nsx Alhen Disc diameter: 230 mm Power: 1500W (on the spindle) Anti-vibration handle included as standard The machine is covered by a one-year manufacturer's warranty. If you have any questions or require additional information, please send a message or contact us by phone.

Condition: refurbished (used), Used K + G Wetter WW 130mm angle grinder is a reliable and durable device designed for grinding both fresh and slightly frozen products. Perfect for small and medium-sized production plants. All made of stainless steel, which guarantees the highest hygiene at work and ease of maintenance. It has two speeds 11/19kW Plate perforations: 2, 3, 5, 8, 10, 12 mm Manufacturer: K+G Wetter Model: WW 130 Height: 1950 mm Width: 1400 mm Length: 1500 mm Weight: 800 kg Capacity: 185l l Electric power supply: 400V 50Hz 3N Pgjdpfx Aok Tzwlelhen Total power: 11/19kW Throat Diameter: 130 mm

Condition: refurbished (used), K+G Wetter WW130 The machine has been fully overhauled by us. The machine is available on site. Errors and prior sale reserved. Pgodpsp Auauefx Alhsn All information is non-binding. The correctness and accuracy of the provided information and prices cannot be guaranteed. Warranty and/or liability are excluded. The machine remains our property until full payment is received.

Condition: refurbished (used), K+G Weather angle grinder 114 Motor power 12 kW, 28 a stainless steel with feed ring screw, 2 speeds weight:615 kg Machine size 70x100x128cm Of course it is possible to visit the machine by appointment. Pgodpfx Alsnp Hqdshjn Errors and prior sale reserved. All information is non-binding. The correctness and accuracy of the information and prices are not guaranteed. A warranty and / or liability is excluded. Until full payment, the machine remains our property.

Condition: like new (used), Completely made of special stainless steel Specialized for grinding cheese and yellow cheese BLOCKS Hole plate diameter: 200 mm Hopper capacity: approx. 400 liters Pgsdpfx Alepgnftjhon Synchronized speed for shatter and feed screw Working worm Machine dimensions in сm: Width: 215,0 Depth: 150,0 Height: 196,0 Main Motor Power: 45 kW Installed Power approx. 65 kW Voltage: 380 V, 50 Hz

Condition: used, pneumatic angle grinder, flex, grinding witch, cut-off grinder, cut-off machine, angle grinder -for discs: Ø 50 mm -Speed: max. 18,000 rpm Psdpfxjd R Ikae Alhjgn -Case with: accessories -Dimensions: 430/360/H90 mm -Weight: 2.2 kg

Condition: good (used), pneumatic angle grinder, Flex, grinding wheel, cut-off grinder, cut-off grinding machine, angle grinder -Max. discs: Ø 178 mm -Speed: max. 8500 rpm Pedpfx Ajb A Intslhsgn -Number: 74 angle grinders available Price: per piece -Weight: 4 kg/piece

Year of construction: 2024, condition: new, functionality: fully functional, machine/vehicle number: CP3T30-120AA5V, Chicago Pneumatic Angle Turbine Grinder CP3T30-120AA5V with autobalancer with spindle lock with tool-free adjustable protective cover Turbine grinder - twice the power with less weight! Ideal tool for grinding and smoothing cast iron, steel, welds, non-ferrous metals of all kinds and stones, e.g. in steel and container construction, mechanical engineering, foundries and reinforced concrete construction Specifications: Speed (idle): 12000 min-1 Max. power: 2.3 kW Air consumption under load: 1.92 m³/min Air consumption idle: 0.48 m³/min Grinding wheel Ø outside max.: 125 mm Weight: 2.4 kg Spindle Thread: M14 Air connection: IG 3/8" Pedpfx Aevptx Telhogn min. hose size at (5m hose length): 16 mm Required air quality: dried and oil-free

Year of construction: 2024, condition: new, functionality: fully functional, machine/vehicle number: CP3T30-085AAV, Chicago Pneumatic Angle Turbine Grinder CP3T30-085AAV with autobalancer with spindle lock Pjdpfx Aljxwn R Aohsgn Turbine grinder - twice the power with less weight! Ideal tool for grinding and smoothing cast iron, steel, welds, non-ferrous metals of all kinds and stones, e.g. in steel and container construction, mechanical engineering, foundries and reinforced concrete construction Specifications: Speed (idle): 8500 min-1 Max. power: 2.3 kW Air consumption under load: 1.92 m³/min Air consumption idle: 0.48 m³/min Weight: 2.1 kg Spindle Thread: M14 Air connection: IG 3/8" min. hose size at (5m hose length): 16 mm Required air quality: dried and oil-free

Year of construction: 2015, condition: as good as new (ex-display), machine/vehicle number: GAT823-450BX, Deprag Angle Turbine Grinder GAT 823-450 BX demonstration tool Lever valve with locking startup Technical specifications: Podpoctlybjfx Alhsgn Free speed: 6600 rpm max. Power: 6,03 hp max. Grinding wheels Outside diameter: 9,05 in. Weight: 4,0 kg Spindle Thread: M 14 Air connection : IG 1/2 "

Year of construction: 2011, operating hours: 50 h, condition: used, machine/vehicle number: 6151704890, Demonstration tool : Desoutter Angel Grinder KA26085B7V Free Speed : 8500 rpm Grinding wheel maximum : 7x3 in. / 8x7 / 8 Pjdpfx Alocpbf Sjhogn spindle thread : 5/8-11 Power : 2.82 hp Weight : 5.9 Ib.

Condition: used, mileage: 99,985 km, power: 120 kW (163.15 HP), first registration: 07/2021, fuel type: diesel, next inspection (TÜV): 08/2027, fuel: diesel, color: white, driver cabin: other, gearing type: automatic, emission class: none, suspension: other, number of seats: 3, Equipment: ABS, air conditioning, airbag, all wheel drive, central locking, cruise control, electronic stability program (ESP), immobilizer system, onboard computer, parking heater, sliding door, soot filter, * Schedule an appointment for consultation and test drive = shorter waiting times: * Time is valuable, and you should not spend it waiting. Therefore, we kindly ask you to schedule an appointment by phone for consultation or a test drive. * Non-smoker TRANSMISSION / CHASSIS * Engine 2.0 L - 120 kW CDI CAT * Drive type: All-wheel drive * Long wheelbase * Panel van * Automatic transmission GTronic (9-speed) * Chassis with increased ground clearance Pgjdpeytld Hofx Alhjn APPEARANCE * Seat belt system with warning indicator (passenger side) * Body color arctic white LIGHT & VISIBILITY * Intelligent Light System LED * Daytime running lights * Windshield wipers with rain sensor * Automatic headlight activation * Aspherical exterior mirrors, both sides * 3rd brake light * Rear LED lights ENTERTAINMENT * DAB tuner (digital radio reception) * Multifunction steering wheel incl. trip computer * Instrument cluster with pixel matrix display * 2nd generation radio * Preparation for Remote Services Plus * Two-way speakers * Audio 10 ASSISTANCE SYSTEMS AND SAFETY * Parktronic system (PTS) * Driver assistance system: Attention Assist (drowsiness detection sensor) * Cruise control * Engine start/stop system * Brake assist * Mercedes-Benz emergency call system * Adaptive brake * Driver assistance system: Breakdown management * Hill start assist * Anti-lock braking system (ABS) * Electronic Stability Program (ESP) * Power steering * Driver assistance system: Crosswind Assist * Immobilizer * Electrically adjustable and heated exterior mirrors, both sides * Speed limiter 210 km/h * Pedestrian protection * Service interval display Assyst COMFORT * Additional heating (hot water) * Cab seats: heated driver's seat * Steering wheel (mechanically adjustable steering column) * Upholstery Caluma fabric, black * Window pillar trim * Cab seats: two-passenger front seat * Sliding door load/passenger compartment right * Cab seats: comfort driver's seat * Cab seats: driver's seat with lumbar support * Comfort lighting in passenger/load compartment * Lockable glove compartment * Automatic climate control (Tempmatik) * Heat-insulating glass OTHER * Full bulkhead in the cargo area * Signs / printed materials in German * Load/passenger compartment trim: plywood * Red fuel filler cap * Enlarged fuel tank * Body/superstructure: standard panel van * Load/passenger compartment trim: semi-high hardboard panel * Cargo area LED lighting * Lashing rails on the cargo area side walls (at belt line) * BlueEfficiency package * Mounting rails for roof carriers * Windscreen with antenna * Low-emission according to Euro 6d-TEMP emission standard * Terminal strip for electrical connections (driver's seat base) * Perm. total weight 2.80 t * Outside temperature display * Load securing/lashing eyes * Particulate filter * PTC heater * Mounting points in the roof frame * Registered as commercial vehicle * Fleece battery 92 Ah * and much more * The above information is provided without guarantee. It does not constitute an agreed-upon specification. Subject to errors and prior sale. * Our services include: * Financing possible even without down payment * Registration service * Trade-in of your old car possible * Delivery available * Tire service, winter and summer tires available for an extra charge * We also speak various languages: * English, French, Spanish, Italian, Russian, Turkish, Serbian, Czech, Croatian, Bosnian

Condition: good (used), Year of construction: 2002, LANDIS 3SE 14"x 60"ANGLEHEAD CNC GRINDER REBUILT BY LANDIS & TOOLED 2002 Equipped with: NEW FANUC CONTROL 2007 2-Axis Template Truform Servo Step Profile Pgedsrtr Easpfx Alhen 30 Degree 30" Wheel Dead Headstock Table Traverse Marposs E39 Marposs Table Gauge Lateral Locator 3-Gauge TIR Gauge Steady Rests Wheel Balance Servo Motor-Traverse Stepping Motor Mist Collector Specifications: Swing: 14" Center Distance: 60" Motor: 1200 rpm Motor Pulley Diameter: 7.031" Spindle Pulley Diameter: 6.5" New Wheel Diameter: 30" Worn Wheel Diameter: 22" Max. Wheel: 8500 sfpm Max. Workhead: 333rpm X-Axis Ball Screw Pitch: 5mm per rev. X-Axis Total Stroke: 14.74" X-Axis Motor Pully Wheel Feed Diameter: 3" X-Axis Ball Screw Pulley Diameter: 3" Z-Axis Ball Screw Pitch: 10mm per rev. Z-Axis Total Stroke: 72.88" Z-Axis Motor Pulley Diameter: 3" Z-Axis Ball Screw Pulley Diameter: 6" Total Stroke: +/-2mm Total Marposs Voltage Output: =/-10vdc Dresser One Revolution of the Stepping Motor: .045" Diamond One Revolution of the Stepping Motor: .005" Weight: 25,000 lbs.

Condition: as good as new (ex-display), functionality: fully functional, Panel saw ALTENDORF HAND GUARD TwinFlex edition with 12" touchscreen, double sliding table, swiveling on both sides, parallel fence with manual adjustment, parallel fence with fine adjustment, control panel at eye level, swiveling, dimension input via touchscreen, F 45 ElmoDrive control system, electric height adjustment, electric swivel adjustment, AKE tool clamping system, automatic correction of the cutting height when the saw head is swiveled, simple axis calibration, machine diagnostics, operating hour counter, USB interface, dust-protected ----- Technical data ----- Swivel range: 0 - 46 °, cutting length: 3,000 mm, cutting width: 1,000 mm, max. saw blade diameter: 450 mm, max. saw blade overhang: 150 mm, angle stop with fixed position: 90 °, manually adjustable via measuring scale: 3,200 mm, speeds: 3,000 / 4,000 / 5,000 rpm, motor power 400 V: 7.5 hp / 5.5 kW, screen size: 12", machine height: 91 cm Optical protection system: Two cameras collect data for hand recognition from a wide area around the saw blade. As soon as intruding hands are detected, the saw head is rapidly lowered and stopped within a quarter of a second. TWINFLEX EDITION - Double sliding table 3,000 mm - Saw blade overhang 150 mm - Motor power VARIO 5 kW (6.8 hp) - Swiveling on both sides - Angle miter stop DIGIT LD, cutting length up to 3,200 mm - CNC parallel fence, cutting width 1,000 mm - On/off switch on the double sliding table - Template holder - Additional cost for motor power 6.5 kW (8.8 hp) ALTENDORF Pgsdpfx Alszgwl Ijhon with VARIO, for swiveling on both sides - Scoring unit 2-axis, 2-sided, ALTENDORF with motorized height and side adjustment Scoring blade height programmable - Rapid lowering and lifting, - Drive motor 0.75 kW (1 hp), 8,200 rpm - Scoring system RAPIDO 180 mm ALTENDORF for swiveling on both sides - LED lighting on the scoring unit ALTENDORF - Double sliding table 3,400 mm, ALTENDORF - CNC parallel fence, 1,300 mm, ALTENDORF - Camera arm, swiveling out of the way ALTENDORF - Front support roller ALTENDORF Width 300 mm - Air cushion table ALTENDORF - Table extension 840 mm ALTENDORF with air cushion - Version HandGuard 2025 new The machine is sold with a new warranty of 1 year. The machine can be purchased at a special price. We would be happy to make you an offer.

Condition: excellent (used), For sale: professional cutter and drill bit sharpener, model PP U3. Condition: very good, complete unit ready for operation. Included in the set: • Set of grinding wheels • Adjustable angular tool holder • Workshop lamp with flexible arm • Keys and clamping elements Specifications: • For sharpening cylindrical and spiral end mills • For sharpening step and cylindrical drills • Wheel linear speed up to 35 meters per second Pgedpfx Aexdh Hqslhjn • Maximum noise level: 66 dB • Machine weight: 41 kg Solid, stable construction—ideal for precise tool machining. A reliable solution for tool rooms, CNC workshops, and machine shops.

Condition: as good as new (ex-display), JUNE OFFER: -10% on all welding equipment throughout June. We offer welding equipment in various configurations and always have several sets in stock. CMT / ROBOT / CMT hose packages, UNIVERSAL or HOLLOW WAVE robots. Everything is in stock and immediately available! Don’t hesitate and request your individual configuration! We also have a wide variety of spare parts in stock – discounts of 30%, 50%, and 70%. Just send a short email, call, or use WhatsApp. CMT equipment at 1/3 of the new price! - 66% DISCOUNT ALL EQUIPMENT CAN BE INSPECTED IN VIENNA and purchased without waiting! The prices quoted are all from ... Euro. The prices/offers are individually tailored to the equipment configuration. .) Fronius power source (TPS 4000 CMT) .) Fronius cooling unit (FK 4000) .) Fronius VR CMT wire feeder Podpfx Aljhzhynehegn .) Fronius intermediate hose package .) Fronius trolley .) Fronius hose package CMT robot .) Fronius RCU 5000i Example images of the item. Please see the numerous YouTube videos on the topic of CMT! Also reachable via WhatsApp and Viber. In stock in Vienna 1230. Shipping on a pallet is possible for an additional charge: Austria approx. 180 Euro Germany approx. 230 Euro Europe on request All prices are ex-price. You can configure the equipment with us. Robot or handheld device. Long or short connection hose package. Various hose packages to choose from. Synchro pulse. 270, 400 or 500 amp equipment in stock. CMT version available as handheld or robot. It is best to call us, we will discuss your area of application, and you will receive an initial price estimate from us.

Condition: used, Industrial Hydraulic Surface Grinder / Reciprocating Surface Grinding Machine Pedpfjy Rz Scjx Alhegn Heavy duty industrial surface grinder in good original condition. Ideal for precision grinding, toolroom work, fabrication shops, engineering workshops and general machining applications. Complete machine with magnetic chuck, coolant setup and controls intact. Machine is mechanically complete and was previously workshop used. Solid cast construction throughout. Suitable for restoration, continued workshop use or export. Features: Hydraulic reciprocating table Magnetic chuck fitted Heavy duty industrial build Coolant extraction/pipework Manual and powered controls 415V industrial supply Condition: Used industrial condition with age-related cosmetic wear. Sold as seen. Loading available on site. Transport can be arranged at buyer’s cost. Please contact for further details, dimensions or viewing.

Condition: good (used), We have 2 granulators / shredding mills for sale (the listed price applies to mill no. 2). The machines were used for cutting and shredding plastic, but they can also be used for processing other plastic materials. Both machines are adapted for liquid cooling. -Technical Data (Mill No. 1, square base): Dimensions: 150 x 115 cm / Height: 210 cm Rotor diameter: 36 cm Rotor/blade width: 55 cm Number of blades: 3 (The fixed blades are positioned diagonally; thanks to this configuration, resistance during cutting and shredding is significantly reduced, making the machine's operation much more efficient). Inlet (feed opening): 30 x 53 cm Motor: 22 kW / 30 HP Adapted for liquid cooling ----- -Technical Data (Mill No. 2, inclined/pyramid base): Dimensions: 150 x 125 cm / Height: 180 cm Rotor diameter: 25 cm Rotor/blade width: 52 cm Pgsdpfx Aouw Skhelhjn Number of blades: 3 Motor: 22 kW / 30 HP Adapted for liquid cooling Prices: Mill No. 1: €7,200 Mill No. 2: €5,900 Price for buying both machines: €11,900

Year of construction: 1998, condition: used, Grinder for sharpening FOR TOOLS GRIFO F36 M FOR TOOLS FOR WOOD FACTORY WHIT PUMP HYDRAULIC AND SANDER dividing chain, SAWS, MILLING CUTTERS Pgsdpfx Ajb Umtkjlhon