Used Arbor Press for sale (12,930)

Condition: excellent (used), Year of construction: 1978, functionality: fully functional, pressing force: 25 t, overall weight: 1,900 kg, Neff straightening press RPH 25 in very good condition, no oil leaks, runs smoothly. Fine and precise control of the pressing force. Outreach: 250 Distance between cylinder and plate: 500 Working stroke: 300, adjustable Working pressure: adjustable Lowering speed: adjustable Ledpfxsz A Dkts Abyjhl Forward and reverse stroke: adjustable. With additional shaft alignment device (removable). Table: 420 x 1000, shaft plate: 400 x 1300 Dimensions: H 2.1m, D 1.28m, W 1.0m - 1.3m Weight: 1900 kg Can be inspected while powered on. Free loading at D-88433 Schemmerhofen.

Condition: excellent (used), Year of construction: 2010, machine/vehicle number: B0501A0285, functionality: fully functional, operating hours: 6,560 h, input voltage: 380 V, input current: 10 A, input frequency: 50 Hz, type of input current: three-phase, pressing force: 50 t, stroke length: 215 mm, operating speed: 220 mm/s, reverse speed: 220 mm/s, table width: 100 mm, table length: 1,275 mm, table height: 950 mm, throat depth: 420 mm, clearance between the columns: 1,040 mm, total length: 2,190 mm, total width: 1,740 mm, total height: 2,375 mm, overall weight: 4,900 kg, Equipment: CE marking, documentation/manual, safety light barrier, I am offering my well-maintained TruBend 5050 for sale. It has no defects, no quirks, and no hidden costs. You are welcome to inspect and test it at any time. I can also take care of the loading. The setup is also not complicated. The buyer is responsible for arranging the shipping. This machine is being offered for sale solely for tax-related reasons. We do not need to and, above all, do not want to sell it below its market value, as it is very reliable and we have grown attached to it. Anyone who is genuinely interested is welcome to contact me. And yes, these are the original operating hours. Nothing has been replaced, falsified, or anything of that nature. The machine has been used very little by both the previous owner and us. The last maintenance was some time ago, but everything else is in absolutely original condition. From the operating manual to the last screw. Lhsdpozlutaofx Abysl

Condition: excellent (used), Vogt LABOPRESS P400S Laboratory Press / Hot Press Manufacturer: Vogt Maschinenbau GmbH Type: LABOPRESS Model: P400S Year of Manufacture: 2019 Machine Type: Hydraulic Laboratory Press / Hot Press For sale is a used Vogt LABOPRESS P400S laboratory press with a Siemens SIMATIC HMI touch control. This hydraulic stationary press is suitable for pressing operations under pressure and temperature, as well as for research, development, material testing, and applications in plastics and composite materials. Technical Data: Max. pressing force according to manufacturer: 660 kN Working area: approx. 450 × 450 mm Usable pressing area: approx. 400 × 400 mm Daylight: approx. 198 mm Max. hydraulic pressure: 230 bar Water pressure: 6 bar Air pressure: 6 bar Connected power: 27 kW Rated current: 63 A Mains connection: 3 × 400 V / 50 Hz Temperature control: Heatable press plates Manufacturer's specification for the basic model: up to 300 °C Plate cooling possible with water Cooling water connections available Dimensions: Machine dimensions according to manufacturer (L × W × H): approx. 1,300 × 700 × 1,900 mm Press area: approx. 400 × 400 mm Equipment: Siemens SIMATIC HMI touch panel Lhsdpfjz Akm Rox Abyol PLC control Hydraulic four-column press unit Heatable press plates Water cooling / cooling water connections LAN interface Closed protective cover with viewing doors Emergency stop Manual / automatic operation Raising / lowering Heating / cooling Transport data: Dimensions: approx. 1,300 × 700 × 1,900 mm Weight: Manufacturer's specification not available – to be weighed before shipping Shipping by freight forwarder possible Condition: Used Optical condition according to pictures. Scope of supply: Vogt LABOPRESS P400S laboratory press Equipment and accessories as shown in the pictures Availability: upon agreement. Scope of supply as shown in the pictures. Subject to changes, errors and prior sale.

Condition: good (used), Year of construction: 2002, functionality: fully functional, filter area: 48 m², filter pressure: 15 bar, pressure: 380 bar, cake thickness: 25 mm, total width: 1,500 mm, total length: 4,800 mm, total height: 1,980 mm, overall weight: 4,600 kg, number of chambers: 44, Equipment: documentation/manual, safety light barrier, For sale is a chamber filter press with the following accessories: Lhodpfx Aszulf Sebyjl Hydraulics, filter plates, safety devices, control system, swing plates, feed pump, press frame (steel platform), 3 cake containers for forklifts. Chamber filter press 800 Side-frame press 15 bar filtration pressure Approx. 540 liters Open filtrate discharge 800x800 PP 25mm chamber depth 44 chambers Approx. 2.5 meters useful length Length 4800 x Width 1500 x Height 1980 mm 4600 kg Price upon request. We would be happy to provide you with an individual offer.

Condition: used, Drawer Press ZVB/ ZUB Dimensions (W x H x D): approx. 250x200x100 cm, with 3 press rams, of which 2 are electrically movable, control cabinet, operating terminal, 1 KUPER glue application unit, 1 drilling unit, Ljdsx Dkygspfx Abyohl

Condition: used, Year of construction: 1969, machine/vehicle number: 5700, functionality: fully functional, ram plate width: 1,350 mm, ram plate length: 3,000 mm, year of last overhaul: 2011, This OTT veneer and carcass press impresses with its robust industrial design and an exceptionally large press format of 3,000 × 1,350 mm, featuring 2011 new heating plates. While many presses offer only a press width of 1,200 to 1,300 mm, this machine enables the processing of particularly large workpieces and special formats. A major advantage is the 2011 renewal of the heating plates by ELKOM, which significantly upgraded the press technically and ensures its continued reliable operation. Lodpsz Dq S Hefx Abyohl The OTT press is ideally suited for carpentry workshops, joineries, interior fitters, as well as manufacturers of doors, stairs, and furniture. Thanks to its stable hydraulic construction, it offers uniform pressure distribution and is suitable for both veneer work and demanding gluing of solid wood and composite materials.

Condition: reconditioned (used), Year of construction: 2017, functionality: fully functional, Dear Ladies & Gentlemen, Lhsdpfxozrulpo Abyol We are offering a XEROX Colour Press C550 with CREO CX560 Print Server (Activation dongle for monitor, keyboard and mouse is included, the accessories themselves are not included!), i1 Spectrophotometer, A3+/SRA3 High Capacity Feeder with 1 Tray & Professional Booklet Maker Finisher for sale. OPTIONAL: As an alternative to the CREO Print Server we can also attach an integrated FIERY EX-i 560 controller to this machine at the same price. Please ask for the FIERY in this case. The machine will be delivered with either CREO Print Server or FIery Controller. Counter: ONLY 1.730.992 prints total This machine was fully and professionally checked in the seller's workshop and is in excellent condition with perfect print image quality. Please contact us with questions! We will be happy to help you!

Condition: excellent (used), Year of construction: 2022, functionality: fully functional, operating hours: 20 h, pressing force: 30 t, stroke length: 150 mm, oil tank capacity: 90 l, total length: 1,760 mm, total width: 1,380 mm, total height: 2,140 mm, overall weight: 1,700 kg, For sale is a compact, precise, and fully functional hydraulic NC bending press, KNUTH AHK M 1230 NC, manufactured in 2022. Lhodpfxoz D Dh Io Abyol The machine has only been used very rarely and is in very good condition. Thanks to its NC control system, it offers the possibility of creating automatic bending programs. Inspection possible by appointment.

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, pressing force: 60 t, Used HSM V-Press 1160 Plus vertical press from 2015. The device is regularly serviced by an authorized service center. The press is fully functional and in very good technical and technical condition. Crushing force: 594 kN Voltage / required: 400 V / 50 Hz Lsdpfx Absz Aafpjyehl Width x height of the loading opening: 1195 x 650 mm Bale length x width x height: 1200 x 1100 x 1200 mm Width x height x height of the machine: 1780 x 1568 x 2985 mm Machine weight: 2403 kg Pressed material: foil, mixed paper, cardboard, cutting machine waste Freight costs depend on the weight, volume and above all on the distance, the following information is relevant for inquiries: Delivery address (postcode and name of the town), but further details require a telephone call, so we ask you to inquire about transport costs and other delivery modalities to contact us by phone. Our contact details can be found under the legal information of the seller. We sell and export worldwide, due to our very large storage capacity we can also deliver larger quantities flexibly and quickly. We issue intra-community invoices - excluding VAT. Opening hours Mon-Fri: 8 a.m.-4 p.m. sat .: closed

Condition: like new (used), Year of construction: 2021, Almost New: Complete Compaction System Ludden & Mennekes SVS11+KEV 1. Stationary Screw Compactor L&M SVS 11 Virtually unused, stationary screw compactor (~1 month) designed for filling compaction containers and/or other containers. The machine is constructed from a robust, welded steel frame with continuously welded seams. Its low-maintenance screw compaction system is suitable for continuous feeding, and the compaction chamber does not require periodic cleaning. Main technical specifications Overall length: 2,480 mm Overall width: 1,660 mm Overall weight: 2,300 kg* Loading height: 1,350 mm Feed opening: 1,375 × 1,490 mm Screw diameter: 750 / 500 mm Screw speed: 17 rpm Drive power: 11 kW Residual-current device / Fused plug Type B / 300 mA 2. Hydraulic Container Coupling/Decoupling System Hydraulically operated coupling and decoupling system with forward and reverse movement. The hooking grippers are operated manually. Designed for the secure connection of different types of compaction containers. Lhjdez Eg Dzepfx Abyol 3. L&M KEV Cardboard Intake/Deflection and Pre-Shredding Unit Virtually unused L&M KEV coarse shredding unit for bulky cardboard packaging, cardboard tubes with cores, and other large-format packaging materials. The material is reduced to a size suitable for efficient compaction, helping to improve compactor utilization and reduce disposal costs. The unit can be installed above L&M self-compacting containers or stationary compaction systems so that shredded material falls directly into the filling opening. Main technical specifications Dimensions (L × W): 1,230 × 1,490 mm Shredding shaft width: 1,400 mm Cutting knife diameter: 585 mm Number of cutting knives: 9 Feed opening: 960 × 1,400 mm Drive power incl. power supply: 2.2 kW + 0.75 kW 4. L&M PCS 6500 Compaction Container Main technical specifications Capacity: 32 m³ Dimensions: 6,500 × 2,500 × 2,600 mm PRICE ON REQUEST

Condition: used, Year of construction: 1995, Vertical baler HSM 45 VL for SALE/RENT! Lhodpfx Aboz Ehhzeyol Manufacturer: HSM Type: 45 VL Year of manufacture: 1995 We have a total of 8 units available. SALE PRICE: 1000 EUR/unit (ex works Lithuania)

Condition: excellent (used), Year of construction: 2022, Weinig Dimter ProfiPress L II Comfort 2500 x 1300 Wooden input length min./max. 800 - 2500 mm Timber widths min./max. 40 - 150 mm Unequal fin width in a panel Wood thicknesses min./max. 4 - 30 mm Plate end widths variable min. / max. 200 - 1300 mm Glue / adhesive type PVAc (Polyvinyl Acetate) Total pressing force max. 240 kN Press force per cylinder max. 24 kN - min. 4.4 kN Filling width of the press per cycle min. 1150 mm - max. 1350 mm Filling area of the press per cycle max. 3.25 m² Min. area occupancy per filling 50 % Max. recommended values are: Specific pressing pressure for softwood approx. 1.0 N/mm² specific pressing pressure for hardwood approx. 1.4 N/mm² Glue station GS 100 - 2,5 m Heizung Hochfrequenz mit Generator, luftgekühlt Generator 30 kW, luftgekühlt Outfeed conveyor 2500mm Full description on request. (Despite our great care all changes, mistakes in technical data, prices and all information is subject to (typing) errors. No guarantee on printed data! Availability subject to prior sales). (Trotz größter Sorgfalt bleiben Änderungen, Irrtümer bei technischen Daten, Preisen und allen Angaben (Tipp-)Fehler vorbehalten. Keine Gewähr auf gedruckte Daten! Verfügbarkeit vorbehaltlich Zwischenverkauf). Prices excl. advertisement cost MachineSeeker / Preise exkl. Inserierungskosten MaschinenSucher Best woodworkingmachines from the Netherlands Holland Die besten holzbearbeitungsmaschinen aus die Niederlande De beste gebruikte machines uit Nederland Lhodpfjz Dh S Rox Abyol

Condition: like new (used), Year of construction: 2018, machine/vehicle number: SD1-160-0030, functionality: fully functional, operating hours: 7,000 h, power: 30 kW (40.79 HP), input voltage: 380 V, input current: 64 A, input frequency: 50 Hz, type of input current: three-phase, pressing force: 160 t, stroke length: 220 mm, operating speed: 720 mm/s, reverse speed: 720 mm/s, table width: 760 mm, table length: 1,150 mm, table height: 940 mm, throat depth: 410 mm, ram plate width: 580 mm, ram plate length: 900 mm, distance table to ram: 400 mm, clearance between the columns: 1,300 mm, oil tank capacity: 70 l, total length: 2,557 mm, total width: 2,161 mm, total height: 3,502 mm, overall weight: 20,000 kg, year of last overhaul: 2026, Equipment: CE marking, documentation/manual, safety light barrier, For Sale: SEYI SD1-160 Servo Press The SEYI SD1-160 is a high-performance straight-side servo press designed for precision metal stamping, forming, blanking, and progressive die applications. With a 160-ton capacity, advanced servo drive technology, and a highly rigid frame construction, this machine delivers exceptional accuracy, productivity, energy efficiency, and process flexibility. The servo-driven ram allows fully programmable slide motion profiles, enabling optimized production cycles, improved part quality, reduced tooling wear, and lower energy consumption compared to conventional mechanical presses. It is well suited for automotive, electronics, appliance, and general metal forming industries. The machine features a robust straight-side frame, precision-guided slide system, integrated tonnage monitoring, programmable motion curves, die memory functions, and a user-friendly touchscreen control interface. Lhodez Dg I Dspfx Abysl

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, pressing force: 60 t, input voltage: 400 V, Used HSM V-Press 1160 Plus vertical press from 2015. The device is regularly serviced by an authorized service center. The press is fully functional and in very good technical and technical condition. Crushing force: 594 kN Voltage / required: 400 V / 50 Hz Width x height of the loading opening: 1195 x 650 mm Bale length x width x height: 1200 x 1100 x 1200 mm Width x height x height of the machine: 1780 x 1568 x 2985 mm Machine weight: 2403 kg Pressed material: foil, mixed paper, cardboard, cutting machine waste Freight costs depend on the weight, volume and above all on the distance, the following information is relevant for inquiries: Delivery address (postcode and name of the town), but further details require a telephone call, so we ask you to inquire about transport costs and other delivery modalities to contact us by phone. Our contact details can be found under the legal information of the seller. We sell and export worldwide, due to our very large storage capacity we can also deliver larger quantities flexibly and quickly. Lhjdpfx Aoz Aafvobyjl We issue intra-community invoices - excluding VAT. Opening hours Mon-Fri: 8 a.m.-4 p.m. sat .: closed

Condition: ready for operation (used), Year of construction: 2004, Pack press Signode with plastic strapping Ljdpfxezca Uxe Abyshl

Condition: ready for operation (used), Manual spindle press / 25 tons Ljdpfx Ajzcxdlsbyjhl -Clearance between columns: 400mm -Spindle diameter: 80mm -Vertical clearance: 420mm -Various clamping jaws Dimensions: L x W x H 1.2 x 0.8 x 2 meters / Weight: 700kg Errors and omissions excepted.

Year of construction: 2025, condition: excellent (used), (Please tell us your offer price) Sale only within Europe, incl. Turkey Price without packaging; delivery condition: FCA (machine location) ===== Technical data see handout. All warranty rights are excluded. For the correctness of the technical data and year of construction, for the completeness of accessories and tool equipment, and for compliance with all safety and environmental protection requirements specified in the accident prevention regulations. No sale to private individuals. Lhedpjz Eg Rbefx Abysl Sales only within Europe, incl. Turkey Price without packaging; Delivery condition: FCA (machine location) ===== Technical data please see handout in attachment. German text leading language. Without any guaranty and warranty, including completeness of tools & accessories as well as environmental and safety regulations. No private sales.

Condition: good (used), functionality: fully functional, BDC 100T Hydraulic Moulding Press | Heated Platen Compression Press BDC 100T hydraulic moulding press for sale with heated platens. Approx. 100 tonne compression press for rubber, plastics, composites and laminating applications. Manufacturer: BDC Machine Type: 100T Moulding Press with Heated Platens Condition: Decommissioned. Good 100 Tonne Heated Platen Compression / Moulding Press This BDC 100T Hydraulic Moulding Press is a heavy-duty industrial press designed for heated platen moulding, compression moulding, forming, bonding and laminating applications. This machine is suitable for use in rubber moulding, plastics processing, composites, bonding, pressing, laminating and heated forming operations, making it a versatile addition to manufacturing, production and specialist fabrication workshops. Key Features 100 tonne hydraulic press capacity Heated upper and lower platens Heavy-duty industrial construction Suitable for compression moulding and heated platen pressing Ideal for rubber, plastics, composites and laminated materials Hydraulic pressing action for controlled force application Well-suited to production, R&D and workshop environments Machine Description The BDC 100T Hydraulic Moulding Press is designed for applications requiring high pressure and controlled heat. The heated platens allow materials to be formed, cured, bonded or compressed under consistent pressure, making the machine suitable for a wide range of industrial moulding and manufacturing processes. Hydraulic moulding presses of this type are commonly used for rubber moulding, plastic compression moulding, composite forming, gasket production, bonded components, laminating, hot pressing and specialist materials processing. Approximate Technical Specification General Manufacturer: BDC Machine Type: Hydraulic moulding / compression press Press Capacity: 100 tonnes Press Action: Hydraulic Construction: Heavy-duty industrial press frame Rams: 4 Platen Type: Heated platens Platen Arrangement: Upper and lower heated work platens Working Applications Compression moulding Rubber moulding Plastic moulding Composite pressing Laminating Hot pressing Bonding applications Heated platen forming Production and workshop moulding work Heated Platen System Lhsdpfx Aezi Hchjbyjl Heating: Heated platen system Platen Size: 510 x 510mm Temperature Control: Fitted with platen temperature control Platen Use: Suitable for controlled heat and pressure applications Press System Power: Hydraulic press system Force: Approx. 100 tonnes Operation: Hydraulic pressing cycle Pump Size: 2.2kW Ram Diameter: 190mm Distance Between Rams: 540mm (Width) Max Daylight: 250mm Typical Configuration: Heavy-duty hydraulic moulding press with heated work platens Summary The BDC 100T Hydraulic Moulding Press is a 100 tonne heated platen compression press used for rubber moulding, plastic compression moulding, composite pressing, laminating, bonding and hot press applications. It features hydraulic pressing action and heated platens, making it suitable for industrial manufacturing, workshop production and specialist materials processing. Important Notice Note: Specifications and information provided in this listing are supplied in good faith; however, their accuracy cannot be guaranteed. Specifications are approximate.

Condition: ready for operation (used), Year of construction: 2016, Make: HSM Model: V-press 860 plus Year of manufacture: 2016 Press force: 418 kN Lhodpfez Dtrpsx Abyjl Voltage: 400 Max. bale weight: 480 kg (depending on the material) Bale dimensions: 120 x 120 x 78 cm Machine weight: 2083 kg Machine dimensions: 180 cm x 125 cm x 298.5 cm Feed opening dimensions: 120 cm x 65 cm Video available upon request.

Condition: used, functionality: fully functional, Year of construction: 2002, operating hours: 12,850 h, controller model: Siemens Sinumerik 840 D, laser power: 2,400 W, stroke rate (max.): 600 1/min, travel distance X-axis: 3,085 mm, travel distance Y-axis: 1,650 mm, TECHNICAL DETAILS Laser type: TLF 2400 turbo Laser power: 2,700 W Working area X-axis without repositioning: 3,085 mm Working area Y-axis max.: 1,650 mm Travel speed X-axis max.: 90 m/min Travel speed Y-axis max.: 60 m/min Simultaneous travel speed: 108 m/min Stroke frequency max.: 600 1/min Punching diameter max.: 76.2 mm Sheet thickness max.: 8 mm Punching force: 220 kN Workpiece weight max.: 230 kg Number of tools in the magazine: 18 pcs. MACHINE DETAILS Control system (software version): Siemens Sinumerik 840 D Pneumatic connection: 25 Nm³/h Electrical connection: 65 kVA Operating hours since power-on: 12,850 h (as of 07/01/2026) Dimensions & Weight Footprint (L × W × H): 7,900 × 8,700 × 2,400 mm Machine weight: 25,000 kg EQUIPMENT Capacitive distance control ContourLas Compact dust extractor Slag detection 18 tool cassettes 18 die holders 3 clamping jaws Automatic tool changer with 18 stations Rotation of all tools NC-controlled digital, maintenance-free AC drives Automatic repositioning Rapid shutdown of the hydraulics Automatic shutdown Tool length compensation Lhsdpfsz Duvvox Abyel 2 small parts slides 500 × 500 mm with sensors Quality list Punch scrap extraction Forming capability Programmable punch lubrication Programmable clamping system Adaptive stroke length control Safety devices Remote diagnostics RJ45 network connection Detailed operating manual Extensive tool set including 18 setup cassettes Storage cabinet, green TRUMPF Quickset TRUMPF Easylod Table extensions (custom-built) for processing sheets up to 4 m in length Existing spare parts, uninspected and without storage Chip conveyor with container Air-cushioned installation Multitool Thread forming

Condition: used, Pneumatic press, compressed air press BOSCH Type Manufacturer’s No. Year of manufacture 1980 Pressing force: 18 kN = 1.8 tons at 5 bar 15 kN = 1.5 tons at 4 bar 12 kN = 1.2 tons at 3 bar 8 kN = 0.8 tons at 2 bar 6 kN = 0.6 tons at 1.8 bar Overhang: 100 mm Ram stroke: 70 mm Table surface: 245 x 200 Ram surface: Ø 45 mm Maximum installation height: 235 mm Arbor hole: Ø 20 mm with clamping screw Compressed air requirement: 5 bar - Pressing force can be continuously adjusted via a pressure regulator - Pneumatic cylinder with ram, height adjustable by 90 mm - Pneumatic two-hand operation - Mounted on a metal frame with wooden plates Space requirement L x W x H: 1050 x 700 x 1600 mm Lhsdpfoh U Dtujx Abyol Weight of pneumatic press: 82 kg Weight with table frame: 140 kg In good condition

Condition: excellent (used), Year of construction: 2022, functionality: fully functional, power: 15 kW (20.39 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, pressing force: 175 t, stroke length: 275 mm, operating speed: 12 mm/s, reverse speed: 190 mm/s, table length: 3,100 mm, table height: 900 mm, throat depth: 410 mm, distance table to ram: 550 mm, clearance between the columns: 2,600 mm, oil tank capacity: 300 l, total length: 5,025 mm, total width: 2,150 mm, total height: 2,680 mm, overall weight: 9,086 kg, Equipment: CE marking, documentation/manual, safety light barrier, 2022 Ermaksan Speed-Bend PRO 3100x175 CNC Press Brake 2022 Ermaksan Speed-Bend PRO 3100x175 CNC press brake in very good condition. 175T x 3100mm, 6 axis, Delem DA66TX, CNC crowning, laser guards, tooling included. Machine Manufacturer: Ermaksan Model: Speed Bend Pro 3100 x 175T Machine Type: 6 Axis CNC Pressbrake Capacity: 3100 x 175T Year: 2022 Control: Delem DA66TX Condition: Very Good Description Ermaksan Speed-Bend Pro 6 Axis CNC Hydraulic Press Brake with Delem DA66TX Control. Available now, this 2022 Ermaksan Speed-Bend PRO 3100x175 CNC Press Brake is a high-quality, modern hydraulic press brake in very good condition. This is a 6 axis machine with Y1, Y2, X, R, Z1 and Z2 axes, fitted with a Delem DA66TX CNC control, pneumatic top tool clamping, CNC crowning, laser guards, wanderer type foot pedal, and supplied with top and bottom tooling. Ideal for sheet metal fabrication, precision bending, stainless steel work, mild steel fabrication, aluminium bending, agricultural fabrication, general engineering and production workshops. Key Features 2022 Ermaksan Speed-Bend PRO 3100x175 175 tonne bending capacity 3100mm bending length 6 axis CNC press brake Y1, Y2, X, R, Z1 & Z2 axes Delem DA66TX CNC control Pneumatic top tool clamping Top and bottom tooling included CNC / motorised crowning Laser safety guards Wanderer type foot pedal Very good condition Excellent machine for fabrication and production bending work Capacity & Main Machine Data Manufacturer: Ermaksan Model: Speed-Bend PRO 3100x175 Year: 2022 Machine Type: CNC hydraulic press brake Bending Length: 3100mm Bending Force: 175 tonnes Distance Between Columns: 2600mm Axes: Y1, Y2, X, R, Z1, Z2 Crowning: Motorised / CNC crowning Backgauge Finger Blocks: 2 Speeds & Axis Travel Y Rapid Speed: 180mm/s Y Working Speed: 12mm/s Lodpoz Dn Huefx Abyjhl Y Return Speed: 190mm/s X Axis Travel: 800mm X Axis Speed: 500mm/s R Axis Travel: 250mm R Axis Speed: 350mm/s Z1 / Z2 Axis Travel Speed: 1000mm/s Stroke, Daylight & Frame Stroke: 275mm Daylight: 550mm Throat Depth: 410mm Table Height: 900mm Table Width: 90mm Power, Size & Weight Oil Capacity: 300 litres Motor Power: 15kW Approx. Length: 5025mm Approx. Height: 2680mm Approx. Width: 2150mm Approx. Weight: 9086kg Delem DA66TX CNC Control Control Features Include 2D graphical touch-screen programming High-resolution colour TFT display Automatic bend sequence calculation Collision detection 3D machine setup with multiple tool stations USB / peripheral interfacing Product and tool memory Profile-TL offline software support User-friendly Delem touch navigation Delem’s DA-66T platform is listed by Delem as a 2D graphical press brake control with automatic bend sequence calculation, collision detection, full 3D machine setup, USB interfacing, 17" high-resolution colour TFT display and Profile-TL offline software support. Included Equipment Pneumatic top tool clamping Top tooling Bottom tooling CNC crowning Laser guards Wanderer type foot pedal 6 axis CNC backgauge system Delem DA66TX control Typical Applications Sheet metal fabrication CNC press brake bending Mild steel bending Stainless steel bending Aluminium bending Box and pan type components Architectural metalwork Agricultural fabrication General engineering workshops Production bending work

Condition: excellent (used), Year of construction: 2000, functionality: fully functional, plate length 3000mm plate width 1300mm oil heating with electric heater 6 hydraulic pistons pistons diameter 85mm plates span 650mm pressure 3kg/cm2 pump motor power 2,2kW Lhsdpoz D Afrsfx Abyjl

Condition: ready for operation (used), Year of construction: 2017, operating hours: 32 h, functionality: fully functional, Ryobi RMGT 790 4-color offset printing press Year: 2017 Maximum printing speed: 16,000 sheets per hour Maximum sheet size: 600 x 788 mm Minimum sheet size: 290 x 410 mm Lhsdpoz D S Atjfx Abysl Automatic plate changing system Powder spray All cleaning cycles 32 million

Year of construction: 2006, condition: excellent (used), • MASA R9001XL single-feed vibro press, year 2006 • Feeder to the stacking elevator • Stacking elevator • Multi-fork trolley Liftmobil II • Destacking elevator • Curing chamber (shelving) for 4,200 pallets • Centering device • Feeder to grab • Packing/grabbing clamp • Cleaning brush • Pallet oiling system • Pallet turning device (turntable) Lhodsylg D Eepfx Abyel • Pallet storage for 20 pcs • Return feeder to vibro press • Roller conveyor for finished pallets • Leng Pac wrapping machine • Leng Pan top foil application • Hydraulic station • Container with electrical control panel • Atlas Copco compressor • Production pallets 1200x1100 mm – approx. 4,000 pcs • Haarup 4500 planetary mixer • Mixer frame/structure • Input hopper with hoist • Cement scale, capacity 1900 kg • Water scale, capacity 1500 L • Conveyor belt to vibro press • Cement feeder • Automatic controls