Used Arc Welding Machine for sale (65,777)

Year of construction: 2017, condition: excellent (used), functionality: fully functional, machine/vehicle number: PL1500-12-REV, High frequency welding machine Year of construction 2017 Full Review Year 2026 Duedeymdzkopfx Ag Asp Power 12KW Electrode 20x1200mm 150cm of arm Large material tank Low pressure system for operator hand safety Back mass plate to the electrode 3 thrust cylinders Automatic adjustment Shielded electrode holder for radio frequency output Triode ITL9-1 tested and fully functional (12 months warranty) User manual 12 months warranty

Condition: good (used), Messer Griesheim welding machine Unitig GW 300 with torch earth cable direct alternating current Duedpfx Ajugv S Ssg Asp

Condition: used, Year of construction: 1987, functionality: fully functional, machine/vehicle number: 118210287, type of input current: three-phase, nominal power at 50% duty cycle: 80 kVA, short-circuit current: 35,000 A, input voltage: 380 V, overall weight: 480 kg, Technical Data Machine Dimensions (L x W x H): 0.73 x 1.22 x 1.57 m Machine Performance Rated Power at 50% Duty Cycle: 80 kVA Continuous Power: 56.6 kVA Maximum Short-Circuit Power: 306 kVA Maximum Welding Power: 245 kVA Machine Voltage Secondary Open-Circuit Voltage: 8.44 V Power Supply Rated Primary Voltage: 380 V Rated Frequency: 50 Hz Short-Circuit Current: 35 kA Maximum Welding Current: 28 kA Permissible Duty Cycle at Maximum Welding Current: 55% Cylinder Electrode Stroke Max. Electrode Stroke (EH): 90 mm Electrode Force: max. 60 N / min. 10 N Spot-Welding Armature Arm Spacing: max. 360 mm / min. 160 mm Electrode Arm: 60 mm upper / 70 mm lower Electrode Holder: 33 mm Electrode Holder Adjustability: 110 mm upper / 170 mm lower Height Adjustment for Electrodes: 100 mm adjustable Throat Depth: 500 mm Materials / Sheet Thickness: Dusdpsyk Rn Ssfx Ag Asp S 235JO+N / 0.5–6 mm Stainless Steel / 0.5–4 mm Light Alloy / 0.5–3 mm

Condition: good (used), Year of construction: 2014, functionality: fully functional, machine/vehicle number: T02172, Manufacturer: THERMATOOL Model: HF WELDER CFI 350 kW VF Year: 2014 Condition: Used Stock Number: T02172 Output power: 350 kW Welding frequency: 150 - 250 KHz Input Voltage: 400 VAC / 50 Hz Duedpfxsyid T Ne Ag Aop Total installed power: 525 kVA

Condition: used, machine/vehicle number: 73947, Spot welding machine NimakPMP5/35 Welding power: 35 kVA, connected load: 83 kVA Dedpoyl Acqofx Ag Aeup

Condition: used, Spot welding machine type POU 33, connected load 40 kVA, no. 445 Dedpfeyl Ab Tex Ag Asup

Condition: good (used), functionality: fully functional, machine/vehicle number: BMP 6-5, throat depth: 250 mm, overall weight: 650 kg, arm spacing: 590 mm, nominal power (apparent): 80 kVA, Manufacturer: Nimak Model: BMP 6-5/80 Description: Projection welding machine Rated power: 80 kVA Djdpfx Ajv N U Tleg Asup Max. force: 1100 daN Throat depth: 250 mm Opening: 350 - 590 mm Weight without control cabinet: 650 kg

Year of construction: 1998, condition: ready for operation (used), functionality: fully functional, MSE Hollinger, for welding the 4 corners of plastic components in a single operation; used, technically refurbished in 2017, year of manufacture 1998. Welding dimensions: Max: 2920 x 3650 mm, Min: 420 x 490 mm. Weld bead limit: 2.0 mm. Duedpoyl H Hmsfx Ag Ajp

Condition: good (used), functionality: fully functional, Ultrasonic welding unit BRANSON, model 8.200 Dsdpsylpqbjfx Ag Asup

Year of construction: 1995, condition: used, 1 used well preserved water cooled inert gas welder MIG-MAG Make: ARTEC Model: W 501 Year of manufacture: 1995 Technical data: Welding current range up to 500 A Weight approx. 250 kg Accessories / special features: Dusdpfxjb Nd E Re Ag Aep - water cooling - separate wire feeder ARTEC DV-W1 with 4 rolls wire feeder - incl. hose package, pressure reducer and ground cable Further technical data see pictures! Siegfried Volz Machine Tools Rüschebrinkstr. 151-153 D - 44143 Dortmund-Wambel

Year of construction: 1999, condition: excellent (used), Year of construction approx. 1980 Power at 50% ED 35 kVA Projection 250 - 450 mm Working stroke 40 mm Electrode force 100 - 460 kp infinitely adjustable Electrode force at 6 bar 460 daN Operating air pressure 2 to 6 bar Electrode arm Ø 60 mm Electrode holder Ø 30 mm Insertion electrodes cone MK 2 Ø 17.78 mm Arm distance 200 / 400 mm Adjustability of the electrode holder 200 mm Connected load 83 KVA Mains connection 380 volts, 50 Hz Dsdpfsium Niox Ag Aoup - 4-time control - stepless power adjustment - Single points and series points - parallel electrode guidance - Water-cooled (without cooling unit) - electric foot switch Weight 300kg

Condition: excellent (used), functionality: fully functional, nominal power at 50% duty cycle: 14 kVA, input voltage: 380 V, type of cooling: water, overall weight: 300 kg, welding power (max.): 40 kVA, arm spacing: 450 mm, total width: 450 mm, total height: 1,450 mm, total length: 1,100 mm, stroke length: 110 mm, input frequency: 50 Hz, Spot welding machine Soudometal SP14P Djdpfx Aowkr Inog Aeup maximum welding current at 50 ED: 14 ​​kVA max. welding power 42 kVA Electrode force: 30-200 DAN Electrode stroke = 30-110 mm Projection: 450 mm Mains connection 380V / 42A secondary current continuous current 1.85 kA; kA short-circuit current 12.5 kV; Electrode force: 30-200 DAN foot control Cooling water volume: 3 l/min Electrode arm Ø: 45 mm Electrode holder Ø: 25 mm Machine weight: 300 kb kg Dimensions: 1250x1100x450 mm If you need more information. We are here to help! Please contact us using the contact form or give us a call Your ad has been automatically translated. Translation errors are possible.

Condition: used, Year of construction: 2013, functionality: fully functional, Graf Synergy SL4-FF 4028 Duodjyg Ruwopfx Ag Ajp Extended dimension 4000x2800mm Weight 2700 Vaccum cleaner In working condition, can be seen at work. Barcode Reader Veka Profiles

Year of construction: 1991, condition: ready for operation (used), Technical features: heated knives, weld bead limitation 0.2mm, optimization of the welding result through the parallel sliding welding process, individual adjustment of the welding parameters, quick changing of the outer contour allowances by means of holding magnets. Air consumption at 6bar: 15l/Takt, angle adjustment range: 30-180°, profile height: 30-105mm, max. profile width at 90°: 157mm, compressed air connection: 8.7bar, power: 2.7kW, supply voltage: 220V, 50/60Hz, length: 770mm, width: 880mm, height: 1560mm, weight: 320kg. An inspection on site is possible. Dujdpeylbrdjfx Ag Aop

Year of construction: 1999, condition: excellent (used), working width: 620 mm, machine/vehicle number: SE 01510 A10, Heater Element Welding Machine HP60/40 by BRANSON The drive is hydraulic, supported by positioning and control systems. The machine is equipped with its own vacuum pump. Usable Heating Plate Area: Width 600 mm x Depth 400 mm Maximum Part Dimensions: - Max. Part Width: 620 mm - Max. Part Depth: 420 mm - Max. Upper Part Height: 350 mm - Max. Lower Part Height: 350 mm (Combinations of part heights possible, depending on contour) - Max. Working Temperature for contact process: 400°C The machine's modular frame structure enables easy retrofitting and conversions. Side doors and the front door in the welding area are easy to open (for simple retooling). The automatic safety lift door ensures high operator safety. Temperature controllers on the operator panel are equipped with actual/target value displays. The operator panel is a Siemens PLC unit. Machine control is via Siemens PLC (S7-300 controller). The heating elements feature temperature sensors for temperature regulation and act as a safety shut-off in case of overheating. Locating pin systems on the tool clamping surfaces enable reproducible receptacle positions. Advantages of Heater Element Welding Technology: - Secure welding of parts with thin or varying wall thicknesses is possible - Low rejection rate due to precise and reproducible weld joints - Thanks to precise time control, temperature control, and force dosing, even sensitive parts can be welded - Almost all thermoplastics can be welded with this process - Different plastic types can be welded together (compatibility should be checked) Technical Data: - Power supply: 3 x 400 V AC + N + PE - Power: 25 kVA - Nominal current: 20 A - Required supply cable cross-section: 5 (supply cables) each 6 mm² - Required pneumatic connection: 6 bar Machine Dimensions: - Machine width approx. 1.22 m - Machine width incl. operator panel approx. 1.8 m - Machine depth approx. 2.1 m - Machine depth incl. operator panel approx. 2.6 m Duodpfx Agsykvdls Aop - Machine height approx. 2.4 m - Machine height with raised safety door approx. 2.85 m (door open) Weight: Approx. 2.2 t

Condition: excellent (used), Year of construction: 1999, Welding machine make DALEX Type:VARIO MIC 400L year 1999 in very good condition, little used. Dsdpfx Aefgvvasg Aeup

Condition: used, Dalex Works Pms 10-2 380V 50Hz rated power at 50 duty cycle: 63 kVA secondary short circuit current: 45 kA rated primary voltage 380 V - 50 Hz open circuit voltage of 5,6 V Dedpog Rcpxefx Ag Asup electrode force: 65-390 daN Machine weight 341 kg

Condition: used, Spot welding machine, projection welding machine DALEX type PL 63 Serial No. N-0051390 Year of manufacture 2018 Output at 50% duty cycle: 63 kVA Output at 100% duty cycle: 44.5 kVA Maximum welding power: 182 kVA Rated welding current: 8.77 kA Throat depth: 250 - 550 mm Maximum arm spacing: 150 to (310 mm) Upper electrode arm diameter: 50 mm Lower electrode arm diameter: 60 mm Electrode holder diameter: 25 mm Electrode stroke max.: 65 mm Electrode force: 100 - 600 daN Operating air pressure: 1 to 6 bar Power supply: 400 Volt, 50 Hz Rated current: 158 A Connected load: 137 kVA - Thyristor power stage - Welding control HARMS+WENDE - HWH MPS 10β - 5-stage control, single spot, series spot, 8 programs - Electrode force infinitely adjustable via air pressure - Parallel electrode guidance - Single-stroke welding cylinder Djdpfx Ageycv Saj Aeup - Water-cooled via external water cooling system (recirculating water cooler not included) - Electric foot switch - Control cabinet with controller fixed to machine - Operating manual Required space (L x W x H): 1150 x 700 x 1600 mm Weight: 335 kg As-new condition

Year of construction: 2007, condition: used, welding machine KVT MT 01-HAT SO, with Rotary table, year: 2007 - 0 working hours, price: 8.800 €, contact: Mr. Rainer Eckerle Duedjcquugepfx Ag Ajp

Condition: used, Year of construction: 1988, functionality: fully functional, Ideal BAS 120. Flash Butt welding Machine for Band Saw Blades. Year of manufacture: 1988. Hydraulic clamping. Annealing pyrometer. Dusdpfxju Shgbs Ag Ajp Blade positioning device. Blade width up to 120 mm. Painted used machine in working condition. Delivery from stock. Voltage: 440 V (USA grid). Transformer for 400V attached (EU grid).

Condition: used, functionality: fully functional, Type: BAS Max welding width up to 50 [mm]. Djdow Snu Sepfx Ag Ajup Flash Butt welding machine. Manual clamping. Blade width up to 50 [mm]. Used machine in working condition. Machine painted. Weld band saw blades for wood up to 50 [mm]. Weld band saw blades for metal up to 34 [mm]. Delivery from stock. Connection: 220 [V]. Weight: cca. 180 [KG]. Packing included.

Condition: used, Year of construction: 2001, functionality: fully functional, Model: BAS 051. Automatic Flash Butt Welding Machine for Band Saw Blades. Pneumatic clamping. Annealing pyrometer. Inserting bar for blade positioning. UniOp automatic annealing temperature control. Machine cleaned and repainted. Dujdpfx Agjxcnzrj Asp Year of manufacture: 2001. Nominal primary voltage: 380 [V AC]. Max. welding rating: 8 [kVA]. Clamping force: 20 [kN]. Forging force: 5 [kN]. Welding ranges. Band saw blades for wood: 6-50 [mm]. Bi-metal bandsaw: 6-41 [mm]. Hoop knives: 6-50 [mm]. Stainless steel bandsaw: 6-30 [mm]. Weight: 600 [kg]. Dimensions (W*D*H): 1350*1000*1700 [mm]. Instructions and packing included.

Condition: excellent (used), 2 - Used Urban AKS 4110 head welding machine - Heated stainless steel blades on top Duodpjykp Dxjfx Ag Aep - Heated stainless steel blades on bottom - Weld seam limitation: 0.2 mm - Maximum welding length: 3.25 m - Set of support arms

Condition: new, Year of construction: 2021, Professional TIG Welding machine FRONIUS type TransTig 2200 Job G/F TIG direct current (DC) Maxi power: 220 A 2-step and 4-step mode (see more technical details on photo) Year of construction: 2021 Dedpjyk Elrefx Ag Ajup New, never used (Purchased price: 3 594 euros) Voltage: 230 V mono

Year of construction: 2004, condition: used, Hollinger 4-point welding machine type ASP-L Dodpfsylingox Ag Ajup