Used Plastic Welding Machine for sale (69,492)

Year of construction: 1999, condition: excellent (used), working width: 620 mm, machine/vehicle number: SE 01510 A10, Heating Element Welding Machine HP60/40 by BRANSON The drive is hydraulic, supported by positioning and control systems. The machine is equipped with its own vacuum pump. Only a few operating hours (approx. 6,800 hours). Usable heating element area: width 600 mm x depth 400 mm Max. workpiece dimensions: - Max. width: 620 mm - Max. depth: 420 mm - Max. upper height: 350 mm - Max. lower height: 350 mm (Combinations of part heights possible, depending on contour) - Max. processing temperature for contact method: 400°C The modular frame design allows for easy conversion and retrofitting. The side doors and the front door in the welding area can be easily opened (for rapid retooling). The automatic safety lift door ensures a high level of operator safety. The temperature control units on the operator panel have actual/target displays. The control device is a Siemens PLC HMI. The machine is controlled by a Siemens PLC (S7-300 controller). Heating elements are equipped with temperature sensors for temperature regulation and serve as safety cut-offs in case of overheating. The pin systems in the tool mounting surfaces ensure reproducible positioning. Advantages of heating element welding technology: - Reliable welding of workpieces with low or varying wall thicknesses. - Low scrap rate due to dimensionally accurate and repeatable welds. - Precise time, temperature, and force control enable welding of sensitive parts. - Virtually all thermoplastics can be welded with this process. - Different thermoplastic types can be joined (compatibility needs to be verified). Technical data of the machine: - Power supply: 3 x 400 V AC + N + PE - Power: 25 kVA - Rated current: 20 A - Required cable cross-section: 5 cables, each 6 mm² - Required pneumatic connection: 6 bar Machine dimensions: - Machine width: approx. 1.22 m - Machine width with operator panel: approx. 1.8 m - Machine depth: approx. 2.1 m - Machine depth with operator panel: approx. 2.6 m Iijdsykvdlopfx Acfsf - Machine height: approx. 2.4 m - Machine height with raised safety door: approx. 2.85 m (open door) Machine weight: approx. 2.2 t

Year of construction: 2012, condition: used, Welding machine, plastic welding machine, plastic socket welding machine, plastic welding machine, PE pipe welding machine, plastic pipe welder, socket welding tool set -Manufacturer: Ritmo, socket welding tool set type R 63 TFE -Voltage: 230V -Power: 1400W -Sleeves: Ø 16 - 63 mm, see photo -Dimension box: 450/350/H130 mm Iijdpfx Asqy Rl Hecfef -Weight: 8.4 kg

Condition: used, functionality: fully functional, Year of construction: 2014, power: 8 kW (10.88 HP), platform length: 4,100 mm, overall weight: 2,850 kg, transport length: 5,700 mm, transport width: 1,330 mm, transport height: 1,300 mm, construction height: 1,300 mm, Equipment: CE marking, The WORK SP 4000 CNC butt welding machine for plastic sheets is manufactured by the Czech company METAL WORKING CZ, s.r.o. It was produced in 2014, is in excellent condition, and comes with a spare Teflon coating. This is a high-tech industrial machine with CNC control, designed for the precise welding of thermoplastic sheets and panels. The main technical parameters and features of this machine series include: Main technical parameters: Maximum working width (welding length): 4000 mm, allowing for the processing of very large plastic sheets. Thickness of materials to be welded: Typically in the range of 2 mm to 25–30 mm (depending on the specific modification and type of plastic). Compatible materials: Thermoplastic sheets made of PE (polyethylene), PP (polypropylene), PVDF (polyvinylidene fluoride), and PVC (polyvinyl chloride). Welding type: Butt-welding with a heating element, using the heated element / hot plate welding method. Isdpfx Acjzdiz Nefeif Control and CNC functionality: Fully automatic cycle: The CNC control precisely manages all phases of the welding process: preheating, transfer time, welding pressure creation, and cooling time. Material database: A system with pre-set welding parameters according to international standards (e.g., DVS standards for welding plastics). Data logging: Automatic generation and recording of welding protocols for quality control (containing information on pressure, temperature, and cycle duration). Advantages of the design: High mechanical stability: A massive steel frame ensures even distribution of pressure along the entire length of the 4-meter sheet. Hydraulic system: Precise adjustment of the clamping force, guaranteeing a homogeneous weld seam without internal stresses. Teflon coating: The heating element is equipped with a high-quality non-stick coating for easy cleaning and to prevent material burning. Length: 5700 mm Width: 1330 mm Height: 1300 mm Weight: 2850 kg Working length: 4100 mm Working height of the machine: 950 mm Minimum thickness of the plastic sheet: 4 mm Maximum thickness of the plastic sheet: 40 mm Machine power: 8 kW Operating voltage - electrical circuits: 3 PEN 50Hz 400/230V Air consumption: 0.8 m³/h Minimum pneumatic pressure: 0.8 MPa Maximum pneumatic pressure: 1.0 MPa Standard for electrical equipment: EN 60204-1 Applicable basic and technical standards: See Chapter 3.3 of the manual Maximum noise level at the workstation: 70 dB If you have any further questions or need more information, please send us a message or call.

Condition: new, Year of construction: 2025, HW 1.5kW is a high-performance, compact fiber laser welding machine designed for maximum efficiency and precision. Technical Specifications: Laser Source Power: 1.5 kW (MAX Laser Source) Welding Speed: 0 - 120 mm/s Welding Spot Adjustment: 0 – 5 mm (Spiral Wobble function) Wire Feeding: Automatic system included Fiber Cable Length: 15 meters Iiedpfx Ajzkkayecfef Power Supply: 220V / 380V Dimensions: 1,000 x 630 x 910 mm Weight: 230 kg Certification: CE Price is EXW (Stock Europe), Include loaded on truck. Transport, installation, commissioning, training, and yearly service contracts are available upon request for an additional fee. Installation and training is always done by our high qualified Service team in 3 locations in Europe. Netherlands, Germany, Romania.

Year of construction: 1997, condition: used, The equipment will be available for sale starting March 2027, as it is currently still in use within the production process Please state your offer price. Price without packaging and transportation; Payment in advance. You need to make us a price offer is you are interested about the machine. The hand over will be at our location Terms of delivery: EXW Cugir, Romania The buyer can assist in disassembling the machine. The buyer is responsible for transporting the machine. We organize only the loading part of the machine on the trailer/truck with forklift/crane Iiedpfjza T A Rex Acfef

Condition: ready for operation (used), PE-KPE pipe welding machine, butt fusion machine, plastic pipe welder, mirror fusion machine, DYTRON ST 160, Used machine Iiedpfx Acexnqt Usfef Manufacturer: DYTRON Model: ST 160 Overall dimensions: Length: 1000 mm Width: 530 mm Height: 1160 mm Electrical data: 230 V DYTRON – Welding Bench ST-160 The ST 160 welding bench is designed for socket and mirror welding of thermoplastic pipes. It supports: Mirror (butt) welding: 40 – 160 mm diameter Socket welding: 40 – 110 mm diameter To facilitate mirror welding, the set includes: Special mobile workbench Electric pipe planer POLYS P-4a welding unit (1200 W) Clamp inserts in sizes: d40, 50, 63, 75, 90, 110, 125, 140 mm Welding pair sets: d40, 50, 63, 75, 90, 110 mm Vise-style clamping mechanism for fittings Mirror insert: d170 Metal case for accessories Support stand Allen keys: 4 mm and 8 mm The ST-160 welding bench is equipped with a microprocessor-controlled welding unit. The standard set also includes a special workbench and a metal case with accessories. ST-160 Technical Specifications Feature Specification Socket welding range 40 – 110 mm Mirror (butt) welding range 40 – 160 mm Welding unit power 1200 W Planer power 630 W Power supply 230 V / 115 V Temperature control Electronic regulator Temperature range 180 – 280 °C Temperature indicator LED diode Planer Electric Weight 70 kg

Condition: ready for operation (used), Resistance Welding Machine, Resistance Welder, Meritus RAS 150 VSH, Used Machine Manufacturer: Meritus Iisdpfx Acordf Acsfjf Type: RAS150VSH, MPW-RW 811-1410 Overall dimensions: 900 x 1370 x 2450 mm Electrical data: 415 V; 150 kVA; 50 Hz Equipped with light gate Tool water cooling

Condition: new, Year of construction: 2026, Technical Specifications: Model: KEP40 Operated: Manuel Power: 40KVA Welding Capacity: 1+1 mm mild steel Power Level: %0-100 power adjustable by digital microcontroller Weld Time: 1-99 Cycle (20ms - 2s) adjustable by digital microcontroller Input Voltage: 380V/50Hz Protection Fuse: 63A Iiedpfey Dildsx Acfsf Flexible Pistol Arm cable Length: 250cm Flexible Chassis Cable Length: 100cm Power Input Cable: 3m Protection Class: IP21 Dimensions (W/L/H): 530mm x 430mm x 610mm Weight: 116kg

Condition: new, Year of construction: 2026, The KL2000 machine combines welding, cleaning, and cutting into a single compact unit. It offers an energy-efficient, low-maintenance, ensuring high precision and fast operating speeds across various metal types. Technical Specifications: Laser Source: 2kW Laser Type: Fiber Laser (Raycus) Ijdpfxezmtmho Acfsif Laser Wavelength: 1080 nm Adjustment of power: 10 - 100% Output Power Stability: < 3% Central focus distance: 150mm Adjustable axial run-out (weld seam): 0.1 - 5 mm Laser Cooling System: Integrated water cooling chiller Power Supply: 220V 50Hz Machine Power: ≤ 9.5kW Operating Environment Temperature: 10 - 40°C Operating Environment Humidity: < 70% (No condensation) Laser Head Cable Length: 8 m Machine Dimensions (L x W x H): 1,000 x 550 x 650 mm Weight: 210 kg CE Certification: Included

Condition: refurbished (used), Year of construction: 1998, functionality: fully functional, input voltage: 400 V, nominal power (apparent): 45 kVA, electrical fuse: 15 A, working range: 50 mm, open-circuit voltage: 28 V, nominal power at 50% duty cycle: 45 kVA, We offer this refurbished IDEAL BAS 050-11 butt welding machine, year of construction 1998. type: BAS 050-11 serial number: 224085 year of manufacture: 1998 year Iiodozudivjpfx Acfof nominal power at 50% ED: 45 kVA rated apparent power: 45 kVA no-load voltage: 28/44 V max upsetting force: 250 kN primary voltage: 400 V rated frequency: 50-60 Hz fuse rating: 15 A Bi-metal / carbide bandsaws: 6×0.6 – 34×1.1 mm Wood saw blades: 6×0.4 – 50×1.0 mm Stainless steel saw blades: 6×0.4 – 25×0.5 mm Strip blades: 6×0.4 – 30×0.6 mm If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: used, MIG MAG welding machine, gas-shielded welding system, MESSER LINCOLN, type MagStar 18 Serial No. 4210048, Year of manufacture approx. 1995 Output: 180 amps = 60% duty cycle 140 amps = 100% duty cycle Setting range: 8 power levels Mains connection: 400 volts, 50 Hz, 16 amp plug Iedszugn Ijpfx Acfoif - Spot welding attachment - 2-roller wire feeder - 3 meter hose assembly with central connection - Welding gas pressure regulator Space required L x W x H: 1150 x 460 x 650 mm Weight: 100 kg In good condition

Condition: used, MIG MAG welding machine, gas-shielded welding unit CLOOS, type GLC 403 PA-TS Manufacturer's No. 8198, Year of manufacture 1994 Rated power 400 amps Power 400 amps - 60% duty cycle 310 amps - 100% duty cycle Adjustment range: stepless Connection hose package: 4.5 meters Mains connection: 380 volts, 50 Hz, 32 amp plug - 2-cycle and 4-cycle welding unit Iedpfxjzugnzo Acfjif - External wire feeder, type CK 72/5TSZK with 2-roller drive and 4.5-meter hose package - 4-meter hose package with central connection and EHRIG hand torch, type Senator-800-D - Water-cooled - Pressure gauge for gas cylinder - Welding unit equipped with 1 mm welding wire Space requirement L x W x H: 1250 x 600 x 1100 mm Weight: 300 kg Good condition

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, input voltage: 400 V, nominal power (apparent): 10 kVA, electrical fuse: 10 A, welding power (max.): 5 kVA, nominal power at 50% duty cycle: 5 kVA, overall weight: 200 kg, workpiece weight (max.): 200 kg, Processes bi-metal, carbide, wood, and stainless steel saw blades up to 50 mm wide, with a 6-stage welding current control for a wide range of blade dimensions and materials. A hydraulic tensioning device on both sides – operated via a foot switch – keeps both hands free for blade positioning and ensures reliable electrode contact with up to 10 kN of clamping force. Equipped with the GTR pyrometer option: the annealing temperature is set and monitored contactlessly according to a pre-defined recipe, and the process cycle ends automatically for reproducible, operator-independent welding quality. The machine is from 2019, is in very good condition, is water-cooled, and is ready for immediate use in production. Manufacturer and model: iDEAL BAS 050-11 Rated power (ED 50%): 4.5 kVA Secondary voltage: 2.6 – 4.4 V (6 stages) Clamping force: 10 kN (hydraulic) Maximum compression force: 2.2 kN Machine weight: approx. 180 kg Iiedpszqdkxefx Acfef Hydraulic tensioning, operated via foot switch Pyrometer (GTR): yes (temperature display on the touch panel) Connection voltage: 380 – 419 V Bi-metal/carbide saw blades: 6×0.6 – 34×1.1 mm Wood saw blades: 6×0.4 – 50×1.0 mm Stainless steel saw blades: 6×0.4 – 25×0.5 mm Blade dimensions: 6×0.4 – 30×0.6 mm Blade steel S235JR: max. cross-section 75 mm² Blade steel X5CrNi18-10: max. cross-section 40 mm² Pyrometer / GTR: The integrated pyrometer (GTR) enables contactless temperature measurement during the annealing process. The target temperature is pre-defined in a recipe and displayed on the panel – the annealing cycle ends automatically when the set temperature is reached, eliminating operator-dependent variations and ensuring consistent welding quality.

Year of construction: 2023, condition: used, functionality: fully functional, machine/vehicle number: 2331 280, We sell a used Bolte Pro I-2200 stud welding unit with microprocessor control. MFG 2023, serial number: 2331 280 The trolley version of the PRO-I 2200, with two large, extremely robust wheels and a telescopic handle, is ideal for mobile use on construction sites. Technical features and advantages: Excellent welding quality – modern inverter technology ensures very precise control and high reproducibility of the welding process Very high arc stability – also in cases of short welding times and low welding currents Powerful – high welding current of 1050 A for a maximum welding diameter of 13 mm Fast welding sequences through innovative cooling concept Ideal for mobile use – considerably less weight than conventional stud welding units Robust construction for use in harsh environments Low energy consumption due to high efficiency Easy operation via a very robust rotary pressure switch Microprocessor control All functions and parameters are displayed on a large display (display contrast is adjustable) Welding program library Welding program storage – 59 Welding range: Ø 2-22 mm Welding current: 100-2100 A Welding method: studs with ceramic rings or shielding gas and short-cycle stud welding with or without shielding gas Welded materials: steel, stainless steel, aluminum Voltage: 320-495 V, 32 A, 50/60 Hz Power source: transformer/rectifier Welding time: 1-1500 ms, continuously adjustable Protection class: IP23 Dimensions (W x H x L) (mm): 550x850x650 mm Weight: 81 kg drawn arc stud welding gun GD 22 WMS is designed for welding shear connectors with large diameters (19 and 22 mm). Welding range Ø 3-22 mm Welding material steel, stainless steel Stud length 10-525 mm Welding method (acc. to DIN EN ISO 14555) stud welding with ceramic ferrule, stud welding with shielding gas Lift 0-6 mm, adjustable (raster: 0,3 mm) Welding cable: 2 m, 95 mm², outside Control cable plug: 12-pin Dimensions (WxHxL): 68x180x295 mm Weight (without cable): 2,45 kg The new drawn arc stud welding gun GD 22 is designed for welding shear connectors with large diameters (19 and 22 mm). The ample-dimensioned adjustable lift (adjustment range: 0-6 mm) ensures in combination with the adjustable hydraulic piston damper optimum welding results in this diameter field. Of course, the new guns are suitable for welding through metal deck. The gun also features a piston with linear ball track, an automatic length compensation system for different stud lengths and surface conditions as well as a robust, impact resistant housing for the hard work on the construction site. The high-grade outside welding cable (cable cross section 95 mm²) accommodates the high welding currents that are necessary for large stud diameters. Optionally, the new guns can be equipped with integrated travel measuring system. Using this the lift adjustment couldn`t be easier. Moreover, it enables a quality monitoring by measuring and recording of stud protrusion before the weld as well as stud travel (lift, immersion depth, immersion speed and short-circuit time) during the weld. Price 8.600 Euro + VAT, negotiable, FCA Oradea, Romania Please make an offer. Irrtum, Anderungen und Zwischenverkauf vorbehalten / Iiodpfxsy Tqwyj Acfef Subject to errors, changes and prior sale / Ne rezervăm dreptul la greșeli, modificări și vânzare We speak English. /Wir sprechen Deutsch./ Beszélünk magyarul. /Nous parlons français/Vorbim romana

Condition: good (used), Inert gas welding machine with pulse function, pulse-arc welding system, MIG/MAG pulse welding system -with: 3 hose packages (1x aluminum, 1x stainless steel, 1x steel) -Max. welding power: 330 A -Equipment: remote control connection, with removable wire feed, including ground cable, gas fitting -Wire feed: 4-roller drive Iodpfx Acsd I U Dwofeif -Cooling: Water-cooled -Dimensions: 655/900/H1490 mm -Weight: 160 kg

Condition: used, Forming area max. (length,width) / mm max. depth of product positive / mm max. depth of product negative / mm Technical specifications: Roll diameter approx. 420mm Projection in width approx. 415mm Projection in height approx. 265mm Table size approx. 605 x 600 mm Belt speed 18 - 562 m/min. 8 levels Saw band length min./max. 3150 / 3260mm - Saw band speed over 4 gear stages and 2 engine speeds - Saw blade butt welder IDEAL BS 0-16 with scissors and whetstone - swiveling work table in 2 axes Dimensions: approx. L x W x H 950 mm x 750 mm x 1900 mm Isdowgi Sijpfx Acfoif Weight 600kg with table feed Description has been adopted.

Condition: like new (used), Year of construction: 2024, functionality: fully functional, type of input current: three-phase, total height: 345 mm, total width: 219 mm, total length: 568 mm, input voltage: 400 V, ground cable length: 1,000 mm, overall weight: 23 kg, type of cooling: air, electrical fuse: 16 A, welding power (max.): 12 kVA, open-circuit voltage: 50 V, welding current at 60% duty cycle: 220 A, welding current at 100% duty cycle: 180 A, space requirement height: 500 mm, space requirement width: 400 mm, space requirement length: 700 mm, input current: 16 A, continuous power (apparent): 8 kVA, Manufacturer Miller Model STi 270 Main Category Welding Equipment Machine Name / Vehicle Type Industrial Welding Machine Condition Used Functionality Fully Functional Inspection Under Power Yes Description Iedpfjy Uxwqjx Acfjif Miller STi 270 industrial welding machine for sale. The unit is fully functional and suitable for professional welding applications. Supports both MMA and TIG welding processes. Compact and durable construction designed for workshop and industrial use. Technical Specifications Input Power 400 V, 16 A, 3-phase, 50/60 Hz MMA Adjustment Range 5–270 A, 20–30.8 V TIG Adjustment Range 5–270 A, 10–20.8 V Duty Cycle at 40% 270 A Duty Cycle at 100% 180 A Open Circuit Voltage 50 VDC (12 VDC)* Welding Processes MMA, TIG Dimensions (H x W x D) 345 × 219 × 568 mm Weight 23.2 kg Features VDR Lift-Arc Hot-Start Arc-Force

Condition: defective spare-parts repository (used), functionality: not functional, Manufacturer: DALEX PMS 11-4 Arm length: 350 mm Power: 100 kVA Iiedpezp Iazofx Acfjf The machine is out of service, and its condition is unknown.

Condition: defective spare-parts repository (used), functionality: not functional, NIMAK BMP 20/200 spot welding machine for sale Arm length: 300 mm Power: 200 kVA The machine is out of service, and its condition is unknown. Iiodpfx Acjzp H Ukefof

Condition: used, Year of construction: 2015, functionality: fully functional, machine/vehicle number: 246393272, input voltage: 230 V, pneumatic connection: 10 bar, Description: For sale is a Dürkopp Adler 745-35 F Premium programmable pocket welting industrial sewing unit, offered as a complete automated workstation. This system is designed for high-precision, repeatable sewing operations such as pocket setting and garment component processing. It features an advanced programmable control system, automated clamping and positioning, and integrated material handling. The machine enables consistent production quality and efficient workflow in demanding industrial environments. The unit has been used in a professional garment factory and was operational prior to factory shutdown. The machine has been serviced and maintained, with the latest maintenance completed on 27.2.2026. Original purchase price approximately €38,000. Includes: • Dürkopp Adler 745-35 Premium sewing unit • Integrated electronic control panel • Automated clamping and positioning system • Conveyor / transfer unit • Pneumatic system and air regulation components • Complete industrial workstation table and frame • Foot pedal controls • Material supports and guides Technical details: • Manufacturer: Dürkopp Adler AG • Model: 745-35 F • Type: Programmable automated sewing unit • Voltage: 1 x 190–230 V • Frequency: 50/60 Hz • Pneumatic system required Condition: Used industrial condition. Operational prior to factory shutdown. Serviced and maintained, latest maintenance 27.2.2026. Inspection possible prior to dismantling. Typical applications: • Automated pocket setting (jeans, trousers) • Reinforcement operations • Repetitive precision sewing • Industrial garment manufacturing Sales terms: This equipment is sold due to factory closure and is being liquidated directly from production use. Sold as-is, where-is. Buyer is responsible for ensuring suitability for their own materials and production. No claims accepted after sale. Removal & transport: Buyer responsible for dismantling and transport. Loading assistance available, but performed at buyer’s risk and cost. Isdoy Agrlopfx Acfsif Video from working situation was taken on 5.3.2026. Ask for video.

Condition: excellent (used), Manufacturer: R+D Custom Automation Type of equipment: Semi-automatic assembly and ultrasonic welding machine Application: Production of medical bags and tubes Serial number: 19-11231 Supply voltage: 240 V AC Supply frequency: 60 Hz Number of phases: 1 Rated current (Full Load Amps): 20 A Maximum motor power (Max H.P.): N/A Compressed air requirement: 1 CFM at 90 psi SCCR (Short Circuit Current Rating): 300 kA RMS Iisdpfx Aceznvfiofjf Enclosure type: NEMA 12 Drawing number: D-11030-2-02

Year of construction: 2022, condition: new, Manufacturer: Hermann Ultraschall (Herrmann Ultrasonics) Type of equipment: Ultrasonic welding machine Model: HiQ G1 Dialog 20/2400 LF Serial number: 20.087/21 Year of manufacture: 2022 Generator power: 2400 W Operating frequency: 20 kHz Ijdpfx Aceznvcnsfjif Welding force (at a pressure of 8 bar): minimum: 30 N maximum: 2490 N Working stroke: 150 mm

Condition: new, Year of construction: 2023, OKIO 2000W Automatic 4-Axis Fiber Laser Welding Machine Power: 2 kW Country of Origin: China Number of Axes: 4 Travel in X-axis: 500 mm Travel in Y-axis: 300 mm Travel in Z-axis: 300 mm Iiodpfxspq Nzae Acfef Worktable Dimensions: 350 mm × 450 mm Travel Speeds: Y-axis: 10 m/min X-axis: 10 m/min Z-axis: 5 m/min Positioning Accuracy: ±0.02 mm 4th Axis: Positioner Rotational Positioning Accuracy: ≤0.05 mm Power Supply: 220 V/380 V Power Requirement: 7.5 kW Machine Dimensions: 500×1400×1900 mm Weight: 280 kg Chiller Welding Source: MAX Mounting Plate, Welding Head Visual CCD Monitoring System – uses a high-resolution camera and monitor to improve welding efficiency and quality The automatic OKIO laser welding machine enables welding of metal components in straight lines, circles, and any arbitrary paths, such as those found in mobile phone housings, mobile phone batteries, sensors, medical devices, and other industries. Laser welding machines use high-energy pulsed lasers to weld objects. High energy and high laser pulse density ensure smooth welds, a narrow weld seam, and a small heat-affected zone.

Condition: good (used), Gas metal arc welding machine, arc welding machine, MIG/MAG welding machine, pulse welding machine, inverter welding machine, impulse welding machine -Manufacturer: Ess, MIG-MAG shielded gas welding machine -Type: E1-3300 Iodpszrt E Ujfx Acfsif -Max. welding current: 330 A -Features: Water-cooled, remote control -Accessories: Hose assembly, ground cable (see photos) -Dimensions: 1020/520/H980 mm -Weight: 116 kg

Year of construction: 2015, condition: excellent (used), PLASTIC BAGS MAKING MACHINE VAMA VC 600 Germany made in 2015. Technical data Manufacturer: VAMA GmbH Model: VC 600 Iijdsg D Arnjpfx Acfjf Production year: 2015 Technical parameters The width of the film maximum: 600 mm The maximum length of the bag: 1200 mm Film thickness: 25-80 μm weld Capacity: 60 - 90 bags per minute Rolling rollers 2 with roll diameter: 700 mm Stacking position: 25-50 pieces Machine for the production of plastic bags Excellent condition, located in Poland