Used Atlas Ar 35 for sale (476)

Condition: excellent (used), Atlas Type: CI3000 F Atlas CI3000 Xenon Fade-Ometer The Ci3000+ Weather-Ometer and the Fade-Ometer with its advanced digital control systems, Iedpfx Aeucd Rbsb Isa represent monumental achievements in the application of digital and optical technologies in easy-to-use laboratory weathering instruments. The 3000 series is recognized by many OEMs in the textile, paint, coatings and plastics industries as the exclusive platform for precise, reproducible and repeatable results, reproducible and repeatable life prediction results. Features: Type Climate Test type Sunlight simulation Light source with xenon arc lamp Applications: Additives and colorants Adhesives and sealants Architecture and construction Automotive industry Food and beverages Graphics Packaging Paints and coatings Photovoltaics Plastics Textiles Wind and solar Consumer electronics Compressed air supply The CI3000 humidification system works with a compressed air ultrasonic spray nozzle. Before entering the system, the compressed air must be passed through a water/oil separator. The small air regulator in the Cİ3000 contains a second water/oil filter and a 5 micron solid filter. Make sure that a separate oil/water separator is installed and do not rely on the air regulator filter, as this is only designed as an additional device. Compressed air specifications Pressure 80-100 PSI (552-689 kPa) Flow rate 4 CFM (0.11 m³/min) Dimensions: Overall dimensions of the C13000 37.5 width X 29 depth X 72" height (95 width X 73 depth X 183cm height) Required footprint: 41.5 width X 80" depth (105 width X 203cm depth) Total weight: 404 kg Voltage: 380-220 V 38 A 50 Hz 〜3/N/PE 8 kW 404 kg Condition: gebraucht / used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: like new (used), Year of construction: 2014, operating hours: 15,000 h, Atlas Copco compressor stage after refurbishment. Iodpfsmzbdwox Ab Iea

Condition: good (used), Year of construction: 2009, MANUFACTURER: ATLASCOPCO MODEL: GA22 FF SERIAL NUMBER: AII239418 Isdpfx Aoxyarqjb Iea YEAR: 1998 POWER (kW): 22 CAPACITY (m3/min): 3.22 PRESSURE (bar): 7.5 OPERATING HOURS (LOAD/TOTAL): 30369/40059 FREQUENCY INVERTER: no BUILT-IN DRYER: yes – R134a 0.95kg HEAT EXCHANGER: no COOLING (AIR/WATER): air

Condition: used, Year of construction: 2006, operating hours: 14,754 h, Equipment: all wheel drive, Atlas Terex 1905 Year of construction: 2006 Iedpfx Abetplq Ie Isa Engine power: 114 KW hammer piping, air conditioning, quick coupler

Condition: used, Year of construction: 2011, functionality: fully functional, machine/vehicle number: 009439, power: 30 kW (40.79 HP), fuel type: electric, volume flow: 4.43 m³/h, pressure (max.): 8.6 bar, type of cooling: air, Equipment: documentation/manual, We are selling a screw compressor that was purchased in 2023. The compressor has been rarely used, is fully functional, and is available for collection. Iodpfx Aoxxipisb Ioa

Condition: ready for operation (used), functionality: fully functional, 2900 werkuren!!! Diesel-oil (1) -- Naphte (2) -- Electr (3): electric voltage: 3 x 380V - 50Hz Isdpfx Aboxl Hxbs Isa Low press. (1) High press (2) Screw (3): 12.75 bar screw compressor Volume flow rate: 18.3 m3/min Power imput: 90kW Volume (L): 1500 L

Condition: excellent (used), Here we offer you a weathering test instrument. Heraeus Atlas Xenotest BETA a universal weathering instrument for testing the light fastness and weathering resistance of materials under normal, high temperature and high performance conditions. XENOSENSIV Gear Regulation of the lamp power in W/m² XENOCHROME 320 35-100 W/m² Sample chamber temperature controlled up to 80°C degree Measuring sensors at sample level XENOSENSIV E(300-400 nm) Humidification / Sprinkling Water supply with integrated water tank Sample chamber temperature: Ambient - 80 °C Black standard temperature: surface - 130 °C Relative humidity: 10 % - 95 % Electronic version: 3/N/PE AC 400V± 10 % 50-60 Hz Mains connection: 32A Power consumption: approx. 12kVA Rated power of xenon lamp 2200VA Power of Xenon lamp 2800VA Rated current 16A Lamp current max. 20A Dimensions: Width 900mm x Depth 1200mm x Height 1800mm. sample area max. 4000cm² Weight: approx. 400kg Type: Heraeus Atlas Xenotest BETA LM Condition: used / used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved). Iodpjg Dglyjfx Ab Ioa Further questions we can answer on the phone for you.

Condition: excellent (used), Year of construction: 2014, operating hours: 23,681 h, functionality: fully functional, Second-hand screw compressor Atlas Copco GA55+. Ijdpfxoxu T Etj Ab Ioa 55 kW with 10 bar and 9.39 m³/min. Year of manufacture: 2014

Condition: used, Year of construction: 2009, MANUFACTURER: ATLASCOPCO MODEL: GA75 VSD SERIAL NUMBER: API656533 YEAR: 2009 Iedexxm Atjpfx Ab Isa POWER (kW): 75 CAPACITY (m3/min): 14.68 PRESSURE (bar): 13

Condition: excellent (used), Year of construction: 2008, operating hours: 6,000 h, functionality: fully functional, overall weight: 372 kg, power: 11 kW (14.96 HP), For Sale: Atlas Copco GA11C 11 kW Screw Compressor (2008) Clean and reliable Atlas Copco GA11C industrial air compressor. A solid oil-injected rotary screw unit, ideal for workshops, small manufacturing facilities, and anyone needing consistent and dependable compressed air. Technical specifications (from nameplate): Model: GA11C Year of manufacture: 2008 Maximum pressure: 8.3 bar (0.83 MPa) / 120 psi Air delivery: 26.5 l/s (1.59 m³/min) – 56.1 cfm Motor power: 11 kW / 15 hp Speed: 2940 rpm Weight: 372 kg (820 lb) Manufactured in: Belgium This unit comes from Atlas Copco’s Airpower series known for reliability, efficiency, and long service life. Its capacity and pressure level make it suitable for powering various machines and tools such as press brakes, shears, CNC machines, welding stations, and general workshop air systems. Condition: Good working condition. Runs smoothly. Operating hours can be checked on site. Iedpfxexw R Rro Ab Ija Ideal for: Workshops Metal fabrication shops Auto repair facilities Small production lines Secondary or backup compressor use

Condition: used, Year of construction: 2003, Two-way excavator designed for loosening excavated material for storage or transport. The machine is used in the following works: - on railway and tram tracks - maintenance and track-related works - earth and road works Manufacturer: ATLAS Model: 1604 KZW Year of production: 2003 Own weight: 22,000 kg Dimensions: 5.9x2.5 m, h: 3.0 m Engine power: 90 kW Equipment: Ijdpfx Abohutkfj Ija - air conditioning - Webasto heating - three-fold arm - front and rear hitch - additional output for a pneumatic hammer - reversing camera - four hydraulic side supports - Joystick control Technical condition: used, functional

Condition: like new (used), Year of construction: 2021, Model G15 FF Main motor power: 15.0 kW Tank capacity: 500 L Iedpfsw Ev Eyex Ab Isa Built-in dryer Electronic control of compressor operating parameters Weight: 340 kg Year of manufacture: 2021 Complies with CE standards

Year of construction: 2016, operating hours: 68,000 h, condition: used, Serial number: CAI72xxxx Iodpfx Abexu A Eio Iea Please contact ATS Norway for more information Please provide reference number upon request: 20523 Specifications: Model year: 2016 Hours: Approx . 68,000 Voltage: 400V Maximum pressure: 8.25 bar Weight: 360 kg Condition: Ready for delivery Description: The compressor is from 2016 and has run for approximately 68,000 hours . Ready for immediate delivery. Hours: 68000 Total Weight: 360

Condition: not inspected (used), Year of construction: 2014, operating hours: 43,965 h, functionality: fully functional, Second hand compressor Atlas Copco GA30VSD+FF. Integrated dryer. Integrated frequency converter. 30 kW. 13 bar. 5.85 m³/min. Isdoxu Ibcjpfx Ab Ioa

Condition: good (used), Year of construction: 2003, MANUFACTURER: ATLASCOPCO MODEL: ZT18 Iodpfx Aoxxb Evsb Iea SERIAL NO.: AII702327 YEAR: 2003 POWER (kW): 18.5 CAPACITY (m3/min): 2.51 PRESSURE (bar): 8.6

Condition: used, ATLAS COPCO 1616.6512.81 screw compressor stage. We can perform a general overhaul upon request. Isdpfxoxw Nxbs Ab Ioa

Year of construction: 2020, condition: new, Field of application: Construction Attachment suited for: Loaders Selling price: € 100, US$ 105,9 Galen Group is very experienced in delivering custom solutions to the underground mining industry. No matter the need, Galen’s experienced design, engineering and manufacturing teams deliver the solution that is right for you. More heavily guarded underground mining buckets designed for corrosive mining materials. For the entire underground loader line, Galen Ground Engaging Tools system now offers bolt on half arrow ground engaging tools (GET) for bucket edges. The system is designed for high abrasion applications where weld-on GET experience high wear rates. With the retention system, the bolt-on GET offer more wear material than standard weld-on GET, and the bolt-on design enables quick removal and replacement. Despite additional wear material, the low-profile front edge eases pile penetration and promotes fast bucket loading. Isdpfsn Tm A Tox Ab Iea

Condition: like new (used), Year of construction: 2017, machine/vehicle number: API801175, Item number MA1131 Manufacturer Atlas Copco Type AQ22VSD Year of manufacture 2017 Machine no. API801175 Length [mm] 2000 Width [mm] 1050 Height [mm] 1500 Weight [kg] 800 Connected load 380 V / Iedpfx Aoh Ed S Ssb Ioa Operating hours [h] As new 76 operating hours Gear [rpm] 6700 Equipment The compressor is water-cooled and the air is absolutely oil-free Operating instructions ,New price 56350€, special price 27500€

Year of construction: 1994, operating hours: 34,200 h, condition: used, Please contact ATS Norway for more information Please provide reference number upon request: 20522 Specifications: Year of production: 1994 Hours : Approximately 34,200 Voltage: 400V Condition: Works as it should Delivery status: Ready for delivery Description: The compressor was produced in 1994 and has run approximately 34,200 hours . It works as it should and is ready for immediate delivery. Iedpfsxu A Ecex Ab Ioa Hours: 34200

Condition: used, Year of construction: 2002, operating hours: 15,152 h, Equipment: all wheel drive, * Pallet fork & shovel * Closed cabin * Front hydraulics * Engine power 74kW * Year of manufacture: 2002 Isdetrqk Rjpfx Ab Ioa * Work lights ----Internal vehicle number 9531----Subject to errors and prior sale

Condition: excellent (used), Year of construction: 2014, operating hours: 43,303 h, functionality: fully functional, Oil-free screw compressor ZT250. Year of manufacture: 2014 250 kW Iodjxt Ralepfx Ab Ija 7.5 bar with 42.31 m³/min.

Condition: used, mileage: 1,001 km, first registration: 01/1993, color: black, driver cabin: other, gearing type: other, Year of construction: 1993, Vehicle location: Bovenden, Body: Atlas roll-off system type 122 with articulated arm for containers up to 5.5m Dismantling of MAN 18.232 4x2 BB with a wheelbase of 4500mm! ACCESSORY INFORMATION WITHOUT WARRANTY, subject to alterations, prior sale and errors excepted! - . Isdpfxoi Rk Npo Ab Isa

Condition: excellent (used), Year of construction: 2004, operating hours: 1,14,000 h, overall weight: 4,400 kg, power: 250 kW (339.91 HP), volume flow: 2.802 m³/h, operating pressure: 10 bar, Regularly serviced, in excellent condition. Atlas Copco ZR250 Screw compressor, 10bar 46m3/min Oil-free, water-cooled. MD600 with adsorption dryer Compressor: Manufacturer: Atlas Copco Type: ZR 250 year of manufacture. 2004 loaded operating hours 114,000 Max. operating pressure: 10bar single-stage drive Cooling water consumption 3.7 liters/s Air delivery: 43.6m3/min Water cooled Oil free Power: 250 kW Mains voltage: 400v 50Hz 445A Last service: September 2023 Adsorption dryer, water-cooled Manufacturer: Atlas Copco Iedperp D Uxofx Ab Isa Type: MD 600 W Year of construction: 2004 Max. operating pressure: 10.5 bar Empty volume: 350 liters machine dimensions: length: 3000mm width: 1600mm height: 2000mm weight: 4400 kg

Condition: excellent (used), Year of construction: 2020, operating hours: 4,124 h, functionality: fully functional, overall weight: 187 kg, fuel type: electric, Complete Atlas Copco GX2FF EP set – compressor + dryer + tank (2020) — Very good condition We offer for sale a complete set consisting of a screw compressor, integrated dryer, and tank, model Atlas Copco GX2FF EP, year 2020. The equipment has been tested, is reliable and ready for use — ideal for industrial applications, workshops, or maintenance purposes. Isdpfsxqq Ansx Ab Ioa Technical specifications Working pressure: 10 bar (rated operating pressure) Air delivery (FAD): ~ 4.9 l/s (≈ 17.6 m³/h) Total weight of set: ≈ 187 kg Condition: Compressor, dryer, and tank in very good, fully functional condition — ready for immediate operation. Price: €3,000 net

Condition: excellent (used), Year of construction: 2002, functionality: fully functional, overall weight: 3,000 kg, total length: 25,400 mm, total width: 1,600 mm, total height: 2,000 mm, power: 165 kW (224.34 HP), volume flow: 1.56 m³/h, noise level: 65 dB, Equipment: documentation/manual, type plate available, Continuously serviced, excellent condition. Atlas Copco ZR160 VSD screw compressor Iodorn S Hpjpfx Ab Ioa With speed-controlled drive, adsorption dryer MD400 Compressor: Manufacturer: Atlas Copco Type: ZR 160 VSD Max. operating pressure: 8.6 bar Variable speed drive Cooling water consumption 2.1 liters/s Air supply: 27 m3/min Water cooled Oil free Power: 163 kW Year of construction: 2002 Uptime: 122499 Last service: September 20, 2002.3. Refrigerator: Manufacturer: Atlas Copco Type: MD 400 W Year of construction: 2002 Max. operating pressure: 10.5 bar Empty volume: 199 l