Used Atlas Ar 55 for sale (509)

Condition: excellent (used), functionality: fully functional, total length: 1,950 mm, total width: 1,500 mm, total height: 1,500 mm, Selling here a heat recovery system for compressed air systems. Original Atlas Copco. WRG system for compressor. Dismantled due to insufficient compressor performance. Was hardly used :( Fpjdpfx Aep N H Huoa Nog Atlas Copco ER90 energy recovery unit - details attached as PDF. For water-cooled oil-free ZR compressor Turn your water-cooled, oil-free ZR compressor into an energy source for hot water with ER, our energy recovery unit. Power: 90 kw Special equipment: Reserve water pump - redundancy 2nd heat exchanger - Very good condition. Hardly ever used - poor planning! Unfortunately no documents available.

Condition: used, Year of construction: 2001, operating hours: 90,000 h, overall weight: 7,000 kg, power: 355 kW (482.67 HP), operating pressure: 10 bar, pressure (max.): 10 bar, type of cooling: water, Good working oil-free compressor, also suitable for spare parts (motor, airend, coolers) Fodpfx Asxbdppea Nepg

Condition: used, Year of construction: 2014, operating hours: 53,000 h, machine/vehicle number: APF 194907, pressure (max.): 7.5 bar, rotational speed (max.): 1,485 rpm, TECHNICAL DETAILS Maximum operating pressure: 7.5 bar Input power: 355 kW Shaft speed: 1,485 rpm Fedpfx Ajy Ia R Sja Njpg MACHINE DETAILS Operating hours: 53,000 h EQUIPMENT Atlas Copco air dryer, model: MD1000 W CE Maximum operating pressure: 10.5 bar Year of manufacture: 2014

Condition: refurbished (used), Year of construction: 2006, power: 90 kW (122.37 HP), fuel type: electric, volume flow: 1,000 m³/h, pressure (max.): 7.5 bar, type of cooling: air, We offer this refurbished Atlas Copco GA90 rotary screw compressor, year 2006. The compressor was imported from Europe and has not been operated in Ukraine. Comprehensive repairs have been carried out, including replacement of the screw block bearings and gearbox (multiplier) bearings, shaft seal replacement and bushing, replacement of the flexible coupling for torque transmission, replacement of the electric motor bearings, as well as replacement of all filters and oil. A new inlet valve with a new solenoid valve has been fitted. The thermostatic valve has been overhauled with a new repair kit, as well as the minimum pressure valve, oil-stop valve, check valve with repair kits replaced, and the condensation drain valve has also been serviced. A new Elektronikon compressor control unit has been installed. The hydraulic hoses have been replaced and the oil system has been cleaned. Fedpfx Aeyxy Daea Nspg Delivery across Europe can be arranged.

Condition: like new (used), Year of construction: 2020, operating hours: 7,384 h, functionality: fully functional, rotary screw compressor with receiver tank and integrated dryer, fully operational and recently serviced (we are official Atlas Copco dealers) main features: max pressure: 10 bar air flow: 1062 l/min power: 7 kW (7.10 hp) Fpedpfx Aajy Rnfce Njg

Condition: excellent (used), Year of construction: 2012, operating hours: 72,651 h, functionality: fully functional, Screw Compressor Atlas Copco GA37VSDFF Integrated inverter and dryer 37 kW 12.80 bar Fpedpfxey Rva Ie Aa Neg 7.37 m³/min Year of manufacture: 2012 Operating hours: 72,651

Condition: excellent (used), Year of construction: 2019, operating hours: 53,672 h, functionality: fully functional, Screw compressor Atlas Copco GA110VSD+FF Integrated inverter and dryer 110 kW Fpjdpfjy Ru Scsx Aa Nog 12.75 bar 20.70 m3/min Year of manufacture: 2019 Operating hours: 53,672

Condition: excellent (used), Year of construction: 2019, operating hours: 10,603 h, functionality: fully functional, Screw compressor Atlas Copco GA45+ 45 kW Fpsdpfsy Ru H Tex Aa Neg 7.5 bar 8.90 m3/min Year of manufacture: 2019 Operating hours: 10,603

Condition: new, Year of construction: 2025, SILENT SCREW COMPRESSOR WITH INTEGRATED DRYER AND 200 LT TANK. LIST PRICE EURO 9940 15 MONTH WARRANTY MAIN FEATURES: Fpedpswaz I Nefx Aa Nog BAR MAX 10 POWER 5KW-7.5 HP FLOW LITERS/MIN 888

Condition: new, Year of construction: 2025, ATLAS SCREW COMPRESSOR WITH INTEGRATED DRYER AND 200 LITRE TANK MAIN FEATURES . max bar 10 power 5kw/7.5 hp air flow liters /min 880 list price euro 9860 Fjdpfswahv Tsx Aa Nspg

Condition: used, Year of construction: 2022, machine/vehicle number: AC20-03842, Unladen weight: 1,940 kg, output: 13.4 kW, with hydraulic loading shovel and 2 trench buckets, recorded operating hours: 3,500 h Fedpoy Rvm Uefx Aa Nopg

Condition: used, Year of construction: 1977, machine/vehicle number: 132M15957, gross vehicle weight: 12,000 kg; axle load: 8,000 kg each Fpsdpjy Rvq Tofx Aa Nog

Condition: used, machine/vehicle number: 1549885, Own weight: 239 kg, working width: approx. 2000 mm Fpedpfx Ajy Rvrwoa Nog

Condition: like new (used), Year of construction: 2003, power: 55 kW (74.78 HP), nominal power: 55 kW (74.78 HP), excellent condition Fpodpfx Aoy Rqmiea Nsg

Condition: used, Year of construction: 2018, functionality: fully functional, machine/vehicle number: API628950, Technical characteristics: Core Specifications Attribute Value Motor Power 90 kW (approx. 125 hp) Max Operating Pressure 8.6 bar to 13 bar (125–188 psi) Fpedpjyam Tcofx Aa Nsg Free Air Delivery (FAD) ~565–588 CFM; 125 psi Cooling Type Air-cooled Noise Level ~74 dB(A) Drive Type Direct drive Integrated Dryer Yes (Full Feature “FF” version) Voltage 400V / 50Hz or 460V / 60Hz Dimensions (L×W×H) ~2179 × 1300 × 1968 mm Weight ~1500 kg Performance & Features - Elektronikon® Touch Controller: Advanced microprocessor for monitoring, control, and remote access. - RDX Synthetic Oil: Long-life lubrication for reduced maintenance. - Energy Efficiency: Specific power as low as 18.9 kW/100 CFM, depending on load. - Integrated Refrigerated Dryer: Ensures clean, dry air with minimal pressure drop. - Oil-Water Separator: Built-in for environmental compliance and air purity. Reliability & Maintenance - IP55-rated motor: Dust and water-resistant for harsh environments. - No-loss condensate drain: Prevents compressed air waste and reduces downtime. - Sound-insulated bodywork: Minimizes noise and vibration. Machine status: WORKING

Condition: used, Year of construction: 2018, functionality: fully functional, machine/vehicle number: API628950, Technical characteristics: Core Specifications Attribute Motor Power Max Operating Pressure Free Air Delivery (FAD) Cooling Type Noise Level Fedpfx Aaexx Snbj Nspg Drive Type Integrated Dryer Voltage Dimensions (L×W×H) Weight Performance & Features Elektronikon® Touch Controller: Advanced microprocessor for monitoring, control, and remote access. RDX Synthetic Oil: Long-life lubrication for reduced maintenance. Energy Efficiency: Specific power as low as 18.9 kW/100 CFM, depending on load. Integrated Refrigerated Dryer: Ensures clean, dry air with minimal pressure drop. Oil-Water Separator: Built-in for environmental compliance and air purity. Reliability & Maintenance IP55-rated motor: Dust and water-resistant for harsh environments. No-loss condensate drain: Prevents compressed air waste and reduces downtime. Sound-insulated bodywork: Minimizes noise and vibration Machine status: WORKING

Condition: excellent (used), Year of construction: 2004, operating hours: 25,608 h, functionality: fully functional, Screw compressor Atlas Copco GR110 110 kW 20 bar 12.60 m3/min Fpodpfxey Nl Rmj Aa Njg Year of manufacture: 2004 Operating hours: 64,326

Condition: excellent (used), Year of construction: 2001, operating hours: 44,098 h, functionality: fully functional, Screw compressor Atlas Copco GR110 110 kW 20 bar 12.60 m³/min Fsdpfx Aasy Nl Irj Njpg Year of manufacture: 2001 Operating hours: 44,098

Condition: excellent (used), Year of construction: 2015, operating hours: 19,431 h, functionality: fully functional, Screw compressor Atlas Copco GA22VSD+FF Integrated inverter and dryer 22 kW Fodpfx Aajy Nlqge Nopg 12.75 bar 4.51 m3/min Year of manufacture: 2015 Operating hours: 19,431

Condition: excellent (used), Year of construction: 2005, operating hours: 20,770 h, functionality: fully functional, Screw compressor Atlas Copco GA18VSDFF Fedoy Nlg Uspfx Aa Njpg Integrated inverter and dryer. 18.50 kW 12.80 bar 3.35 m3/min Year of manufacture: 2005 Operating hours: 20,770

Condition: like new (used), Year of construction: 2023, operating hours: 10,626 h, functionality: fully functional, Used Atlas Copco FD220VSD-G Refrigerated Dryer - Premium Fsdpfoy Iwtdsx Aa Nopg 13.20 m³/min 14 bar Year of manufacture: 2023 Operating hours: 10,626

Condition: excellent (used), Year of construction: 2016, operating hours: 64,020 h, functionality: fully functional, Used Atlas Copco FD285 refrigerated dryer Fpodpfoy Iwc Ejx Aa Neg 17.10 m³/min 14 bar Year of manufacture: 2016

Condition: used, Year of construction: 2002, machine/vehicle number: AII 476498, overall weight: 1,600 kg, power: 75 kW (101.97 HP), volume flow: 709 m³/h, pressure (max.): 10 bar, Two used compressors for sale. Unit price: €13,000. Fpjdpfx Ajyymnnja Nsg

Condition: used, Year of construction: 1994, 1994 | Atlas Copco Qas 28 | Used Generator Set 📍Location: France 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! 💰 Buy Now for EUR 5000 or Make an Offer. Payment at delivery available for an affordable fee (subject to approval)* 👷‍♂️ Inspected by an independent expert 23 inspection points 18 approved ✅ 2 imperfect ℹ️ 0 issues ⚠️ 📌 Inspector's Comment: Generator Set 30 kVA, 77A/44A 230V/400V. Circuit breakers 40A and 16A. A 32 A socket added on the fly. Number of hours unknown. Works well. Year 1994. Fpjdpfsy Rukfox Aa Nsg 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "39926 Equippo" is commonly used when looking up more details online. 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals ✔ Jobsite delivery available ✔ Money-Back Guaranteed ✔ Secure and flexible payment options 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.

Condition: like new (used), Atlas Copco / Scheugenpflug The entire system is unused and in like-new condition Model: VDS P6030 Automatic processing of a complete cycle from loading to unloading Mixing of two components (e.g., resin and hardener) directly in-process Precise application of material at defined positions on the workpiece Component handling via a 3-axis system (X, Y, Z) Operation in automatic, semi-automatic, and manual modes Technical data: Power supply: 400 V AC, 50/60 Hz Rated current: 13.6 A Power consumption: 8.5 kVA Fusing: 3 × 32 A Control voltage: 24 V DC Operating pressure: 6 bar Pressure monitoring: 4 bar Compressed air connection: 6 bar Operating temperature: +10 °C to +40 °C Storage temperature: −20 °C to +60 °C Humidity: 10% to 85% (non-condensing) Control cabinet protection class: IP21 Foundation slope: max. 0.05% Clearance around machine: 0.8 m Clearance in front of control cabinet: 1.2 m Width: 1660 mm x Height: 2305 mm x Depth: 1315 mm Weight: 600 kg Sound pressure level: ≤ 70 dB(A) Model: A310 Technical data: Tank volume: 60 l resin and 20 l hardener Agitator in each tank Vacuum sensor for each tank Fedpfey Naf Eex Aa Nspg Level sensors including overfill protection Suction valve per tank Sight glass with illumination Vacuum degassing directly in tank Material circulation to prevent sedimentation Optional tank heating Pneumatically driven piston pumps Delivery volume approx. 294 cm³ per stroke 1 or 2 pumps per tank possible Continuous dosing with dual pump system Pump variants: horizontal and vertical, suitable for highly viscous materials Vacuum generation via vacuum pump or ejector Oil separator to protect vacuum pump Control via SCP touch panel Operating modes: Automatic, pause, external control Material circulation during pause mode Possible integration to external control via interface Monitoring of production time, system availability, and material consumption Calculation of remaining material availability Power supply: 230 V or 400 V AC Operation outside EU with transformer possible Operating temperature: +5 °C to +40 °C With vacuum pump: +10 °C to +40 °C Humidity: 10 to 80 percent Protection class: IP20 Dimensions: Width 700 mm x Height 1950 mm x Depth approx. 1165 mm Weight: approx. 400 kg Model: LP804 Technical data: Application: Conveying and preparation of 1K and 2K dispensing materials (low to medium viscosity, also abrasive) Tanks have 50 and 20 liter capacity Control voltage: 24 V DC Power supply: per wiring diagram Rated current: per wiring diagram Power consumption: per wiring diagram Fusing: per wiring diagram Operating pressure: 6 bar Pressure monitoring: 4 bar Operating temperature: +10 °C to +40 °C Storage temperature: −20 °C to +60 °C Humidity: 10% to 85% (non-condensing) Control cabinet protection class: IP54 System protection class: IP20 Installation surface: max. 0.5% slope Clearance around system: 0.8 m Clearance in front of control cabinet: 1.2 m Dimensions: Width: 1500 mm x Height: 2050 mm x Depth: 770 mm Weight: 430 kg Noise level: ≤ 70 dB(A) Condition: unused Scope of delivery: (see picture) (Changes and errors in technical data and specifications reserved!) For further questions, please feel free to contact us by phone.