Used Attic Racking for sale (3,358)

Condition: like new (used), Year of construction: 2025, Used cantilever rack: screw system in hot-dip galvanized design Scope of delivery: 4 rack uprights, height 4,160 mm with foot section, 1,200 mm usable depth 12 cantilevers with 1,200 mm usable depth, standard Longitudinal and diagonal struts for 4,000 mm rack length (distance 1,300 mm) Fastening material (screws, nuts and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 90 uprights in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Surface hot-dip galvanized - Rack height 4,160 mm - Load capacity per upright 2,250 kg - Foot section and cantilever arms with 1,200 mm Usable depth - Cantilever arms height adjustable in 100 mm increments - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) Iasdpfemhhf Sjx Amyot - With assembly instructions and C4 load plates in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight with registration before delivery. The material is packed sensibly to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and suitable for dowels and must be able to absorb the loads. The customer must check and ensure that the floor conditions and load-bearing capacity, as well as any official permits that may be required, are obtained. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and is not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: like new (used), Year of construction: 2024, Screw system in hot-dip galvanized design: Pick-up price: Sturdy steel construction made of IPE profiles Shelf height 3500 mm Load capacity per upright 2100 kg Foot section 1200 mm usable depth Cantilever arms height-adjustable in 100 mm increments 3 screw-on cantilever arms per upright Usable depth 1200 mm, standard (= 4 levels) Iajdpsmhhl Hefx Amyet Load capacity per cantilever arm 700 kg Including longitudinal and diagonal bracing Including fastening material (without ground anchors) With assembly instructions and load plates C4 according to DIN standard

Condition: like new (used), Year of construction: 2024, Cantilever rack in painted version (RAL 7016 anthracite): Scope of delivery: 4 rack uprights, height 4,200 mm with foot section, 1,200 mm usable depth 12 cantilevers with 1,200 mm usable depth Longitudinal and diagonal struts for 1,300 mm rack axis spacing (4,000 mm rack length) Fastening material (screws, nuts and washers) - (*No paint damage!) - (*No damaged components!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 50 racks in stock) Net price: €1,990.00 plus VAT Detailed description: - Stable steel construction made of IPE profiles (screw system) - Surface painted in RAL 5010 (gentian blue) - Rack height 4,200 mm - Load capacity per stand 2,200 kg - Base and cantilever arms with 1,200 mm usable depth - Cantilever arms height adjustable in 100 mm increments - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 730 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without floor anchors) - With assembly instructions and load plates C4 in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. Delivery can take place in approx. 1 - 2 weeks after receipt of the order. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-compatible and must be able to bear the loads. The customer must check and ensure that the soil condition and load-bearing capacity as well as any official permits that may be required are obtained. The shelf supports must be anchored to the ground on site; anchoring to the wall is not necessary and is not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm from the top edge of the stand. Iodomidyfjpfx Amysat

Condition: like new (used), Year of construction: 2024, Cantilever rack double-sided used: Hot-dip galvanized screw system Scope of delivery: 4 double-sided shelf uprights, height 3,500 mm with foot parts each 1,200 mm 24 cantilevers with 1,200 mm depth, standard Including longitudinal and diagonal braces for 1,300 mm axle spacing Incl. fastening material (without ground anchors) - (*Delivery time approx. 1 week) Iasdpfomkixwjx Amyot - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Also available in larger quantities: 20 uprights in stock) Detailed description: - Stable steel construction made of IPE profiles - Surface of all components hot-dip galvanized - Load capacity per upright side 2,250 kg - Load capacity per cantilever arm 750 kg - Cantilever arms height adjustable in 100 mm increments - 6 screwable cantilevers per upright and 2 foot parts with a depth of 1,200 mm, standard = 4 storage levels one above the other per stand side - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and load plates C4 in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - Collection on site possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: like new (used), Year of construction: 2025, Used cantilever rack: screw system in hot-dip galvanized design Scope of delivery: 4 rack stands, height 3,000 mm with base section 1,200 mm 12 cantilevers with 1,200 mm usable depth, standard Including longitudinal and diagonal braces for 1,300 mm axle spacing Incl. fastening material (without ground anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 50 stands in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Hot-dip galvanized surface - Rack height 3,000 mm - Load capacity per stand 2,250 kg - Base section and cantilevers with 1,200 mm usable depth - Cantilevers in 100 mm increments height adjustable - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) Iasdpfsfdkbhsx Amyjt - With assembly instructions and load plates C4 in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - Collection on site possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: new, Year of construction: 2024, carrying capacity per cantilever arm: 500 kg, shelf height: 3,200 mm, total length: 2,100 mm, total height: 3,200 mm, axle spacing: 1,000 mm, load capacity per stand: 2,500 kg, Cantilever rack in hot-dip galvanized design: Scope of delivery: 3 rack stands, height 3.2 m with base section, 1.8 m usable depth (2 m total depth) 12 cantilevers with 1.8 m usable depth (for chipboard with approx. 2.1 m depth) Longitudinal and diagonal struts for 4 m rack length (distance 1.3 m) Fastening material (screws, nuts and washers) Iaedpfxsqt Dmyo Amyot Net price: €2,490.00 plus VAT Detailed description: - Stable steel construction made of IPE profiles (screw system) - Rack height 3,200 mm - Load capacity per stand 2,500 kg - Base section and cantilevers with 1,800 mm usable depth - (for 2,100 mm chipboard depth) - Cantilevers height adjustable in 100 mm increments - 4 screwable screws per stand Cantilever arms, standard (= 5 storage levels) - Load capacity per cantilever arm 500 kg - Including longitudinal and diagonal braces for 1,000 mm spacing - Shelf length = 2,100 mm - Including fastening material (without ground anchors) - With assembly instructions and load plates C4 in accordance with DIN standard - Made in Germany - Short delivery time Our cantilever racks are produced exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. Delivery for stock items can take place in approx. 1 week after receipt of the order. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: good (used), Year of construction: 2018, TwenTower – Drawer rack for sheets up to 3m x 1.50m, storemaster – used: Ex-site price: €17,500 (net), including loading Manufacturer: storemaster Type / System: TwenTower SL 19 Year of manufacture: 2018 Heavy-duty drawer storage system for storing wood-free large-format sheet metal packs For sheet sizes up to: 3,000 x 1,500 mm (usable drawer area) For manual removal of individual sheets, or with vacuum lifter or magnet 19 drawers with 50 mm usable height each Max. load per drawer: 1,750 kg (even load distribution) Full-extension >100% Top grip height approx. 2,100 mm Max. load per level: 3.0 t (even load distribution) Max. load per rack block: 50,000 kg (even load distribution) System overall height: 2,380 mm Extension single-sided Drawer sidewalls pivotable Standard loading: by package using overhead crane or forklift crossbeam; or by individual sheet using vacuum lifter or magnet Iodpfx Amjyzcwnjyoat Delivered ready for operation, block mounted According to manufacturer’s details for SL 20: Compartment pitch: 100 mm System width: 3,750 mm System depth open: 3,550 mm System depth closed: 2,050 mm System weight: 6,795 kg New price approx. €45,000 (net) Condition: good Availability: immediately Location: 27753 Delmenhorst

Condition: new, Year of construction: 2026, machine/vehicle number: EAN0729389556525, total length: 71,000 mm, total height: 4,000 mm, clearance between the columns: 2,700 mm, shelf height: 4,000 mm, number of shelf rows: 7, load capacity: 6,000 kg, frame height: 4,000 mm, load per truss pair (max.): 3,000 kg, Pallet Racking System 4 m high, each bay with 2 beam levels (clear width 2700 mm) Scope of supply: 32 frames, 4 m high 128 floor anchors 18 corner impact protectors 100 beams, 2.7 m long, 0.11 m high Iedpfx Amoy E Nn Usysat 150 mesh decks 89/110, load capacity 1000 kg 7 load capacity signs Delivery: free to site Frames bolted, not pre-assembled Freight / Delivery: - Maximum 20 working days after receipt of payment - Free delivery to site / assembly location - Unloading from the truck is carried out by the customer using their own lifting equipment - Delivery to anywhere in Germany except islands! Deliveries to EU countries are subject to individual agreement.

Year of construction: 2020, condition: used, module 4 diameter 180 mm Bore diameter 40 mm width 67 mm Isdpfx Amem Avwzeyeat 5 weight 15 kg Milling cutter is as new, without signs of use Other used rack and pinion group cutters up to module 10 on request

Year of construction: 2020, condition: used, module 10 diameter 180 mm Bore diameter 40 mm width 75 mm 2 weight 14 kg Milling cutter is as new, without signs of use Other used rack and pinion group cutters up to module 10 on request Iaedpjm Avwwsfx Amyst

Condition: used, Used pallet racking extension section - 2860 x 1070 x 5500 mm with 3 shelves - 3200 kg load capacity (per shelf). Suitable for heavy storage - durable, flexible and robust. Expand your pallet storage effortlessly with this sturdy extension section. Manufactured from high-quality hot-dip galvanized steel, which not only Ijdpfowprzfsx Amyoat

Condition: used, A used storage rack is a durable, flexible solution for the organized storage of a wide range of goods. With dimensions of W 1055 × D 640 × H 2200 mm, this rack offers generous storage capacity in a compact form. The entire structure is made of hot-dip galvanized steel, which ensures excellent corrosion resistance and a very long Iajdpfex Hugfsx Amyet

Condition: used, These stacking racks can be used as mobile warehouse racks. Available in various versions, but above all, flexible in height. The loading platform is designed for all standard pallet sizes, bulky or difficult-to-palletize goods. You can determine the height of the stacking racks yourself by choosing from the stanchion Iaodpex Ahu Ssfx Amyst

Condition: used, These stacking racks can be used as mobile warehouse racks. Available in various versions, but above all flexible in height. The loading platform is designed for all standard pallet sizes, bulky or difficult-to-palletize goods. You can determine the height of the stacking racks yourself by choosing from the pillar Iasdpfxsx Ahurj Amyot

Condition: used, This used and robust stacking rack is a flexible and space-saving solution for storing pallets and goods in warehouses and distribution centers. With its generous dimensions of 2150 x 1100 x 310 mm (L x W x H), the rack is suitable for storing up to two Euro pallets side by side. Iodpfx Amsx Ahpieyoat The construction is made of hot-dip galvanized steel,

Condition: used, From € 174,45 now for € 139,56. Now with a 20% discount. A used demountable META shelf rack (1350x635x2500 mm) made of galvanized steel is a durable and versatile storage system in various environments, such as warehouses, garages or industrial areas. Isdpsw Sxvgjfx Amyoat Galvanized steel offers excellent corrosion resistance, making the storage rack durable

Condition: used, A used demountable META shelf rack (6580x635x2500 mm) made of galvanized steel is a durable and versatile storage system in various environments, such as warehouses, garages or industrial areas. Galvanized steel offers excellent corrosion resistance, making the storage rack durable and suitable for various environments, including humid Iaodpfx Aew Sxvtsmyet

Condition: used, A used demountable META shelf rack (5270x635x2500 mm) made of galvanized steel is a durable and versatile storage system in various environments, such as warehouses, garages or industrial areas. Iaodpfow Sxvmex Amyet Galvanized steel offers excellent corrosion resistance, making the storage rack durable and suitable for various environments, including humid

Condition: used, A used demountable META shelf rack made of galvanized steel is a durable and versatile storage system in various environments, such as warehouses, garages or industrial areas. Galvanized steel offers excellent corrosion resistance, making the storage rack durable and suitable for various environments, including humid conditions. Iaodpfx Amew Sxvyoyet The

Condition: used, A used removable add-on META section (1320x635x2500 mm) for shelving unit type number 7172. Iedsw Swzhepfx Amyoat ATTENTION: THIS IS ONLY AN ADDITIONAL SECTION: to be able to place this extension section you need at least one basic section (98-7172GB-S1), after that infinite extension is possible. This galvanized steel META storage rack

Condition: used, From € 507,45 now for € 456,71. Now with a 10% discount. Used Pallet Racking Starter Section – 2860 x 1070 x 5500mm with 3 Tiers. Isdpfx Amewpry Uoyjat This robust pallet racking is perfect for efficient and safe storage in any warehouse. Made from durable, hot-dip galvanised steel and featuring two height-adjustable tiers, this racking offers maximum

Condition: used, High quality used long span shelving. Very suitable for the storage of goods that are too large for a shelf rack without having to use a complete pallet rack. Made of high-quality galvanized steel, extremely strong, easy to use and quick to assemble. Isdpsrfa Snjfx Amysat Set consisting of: 10 beams W: 1500 mm. 25 cover plates

Condition: used, High quality used long span shelving. Very suitable for the storage of goods that are too large for a shelf rack without having to use a complete pallet rack. Made of high quality galvanized steel, extremely strong, easy to use and quick to assemble. Iedpfx Aorfa Skemyjat Set consisting of: 20 beams W: 1500 mm. 50 cover plates

Condition: used, Batch offer consisting of 16 used and robust stacking racks. A flexible and space-saving solution for storing pallets and goods in warehouses and distribution centers. With its generous dimensions of 2150 x 1100 x 310 mm (L x W x H), the rack is suitable for storing up to two Euro pallets side by side. The construction is made of Iodpfxoy Hpttj Amyoat

Condition: used, This shelving extension section is a practical addition to an existing shelving unit and offers an efficient solution for easily increasing storage capacity. Ijdpfjy Hpw Eox Amysat Thanks to the modular design, the system can be expanded flexibly, creating a clear and scalable storage setup. The extension section measures 1,400 x 560 x 1,580 mm (W