Used Auger for sale (368)

Condition: used, Year of construction: 2017, operating hours: 1,915 h, Equipment: all wheel drive, In accordance with our "General Terms and Conditions," without any guarantee or warranty, we can offer you the following vehicle on a non-binding basis until a deal is concluded, subject to errors, typos, and prior sale: Hako CityMaster 600 with new engine, sweeping unit with water and dirt tank with new engine, front-mounted mower, salt spreader, snowplow (Vehicle 267) First registration: December 14, 2017 10,236 km 1,915 brush operating hours 971 brush operating hours Engine new in 2025, currently 170 operating hours Engine 1,642 ccm 24 kW / 33 hp 25 km/h approval Permissible gross vehicle weight 2,200 kg Unladen weight 1,380 - 1,465 kg Overall length 3,160 - 3,260 mm x overall width 1,085 - 1,200 mm x overall height 1,9985 - 2,202 mm Road approval Articulated steering 2-brush system, adjustable Turbine + water pump on/off Water volume adjustable 3 speed settings for operation Radio/CD Rotating beacon, driver's side, rear Nledpfx Ahjzwru Esnef 2 headlights at the top + 2 pairs in the middle Rear view camera with monitor, additional camera for monitoring the suction nozzle, automatic switching when reversing Radio with Bluetooth for mobile phone and MP3 Repetition lighting, cabin roof Path sensor 7-pole control cable Universal tires 23.00x8.50-12 Trelleborg T539, front approx. 80%, rear approx. 90% Grammer comfort driver's seat with air suspension Universal collection container 600 L, hydraulically tilting, payload 500 kg, emptying height 142 cm, emptying width 865 mm Hand suction hose for leaves, accumulated dirt, etc., foldable on the passenger side in the middle Universal quick-change roller carriage Vacuum indicator, container, to monitor suction performance and indicate reduced suction performance when the maximum container capacity is reached, as well as a blockage indicator Sweeping unit, 2 brushes, hydraulically adjustable, sweeping width 110 to 180 cm, brush arms with triple impact protection Disc brush, plastic-steel Light weed brush on the right Attachment, suction nozzle, roller carriage, sweeping unit Universal front-mounted mower 122 cm (hydraulically driven 3-blade special mower with rear discharge, working width 122 cm, integrated pendulum compensation, four-wheel drive with cutting height adjustment in 1 cm increments from 4 - 10 cm, transport lock for road travel) Attachment, suction nozzle, mower Attachment, suction (transfer device for connecting the suction nozzle) Salt spreader KIF SS200 (single-chamber spreader with fully hydraulic drive, auger discharge, mixing shaft and folding spreading plate, loading capacity 200 L, hand control for spreading rate and width, working width 1.5 - 4.0 m spreading plate, protection and discharge slide made of stainless steel. Filling sieve, foldable cover, additional protective cover for CityMaster 600. Quick-change base frame for CityMaster 6009, spreader RAL 2011 and 2-layer interior coating, container attachment 130 L, to increase the loading capacity to 330 L for light spreading materials such as salt and granules Spreading control from the cabin, spreading rate, spreading width with automatic start/stop function Snowplow 135 cm, with automatic folding function, rubber edge strip Price: € 29,000.00 (net) All information without any guarantee or warranty. Our "General Terms and Conditions" apply. Place of jurisdiction for both parties up to a dispute value of € 10,000 is the district court of Ludwigslust; for disputes exceeding this value, it is the regional court of Schwerin. Subject to errors

Condition: excellent (used), Year of construction: 2001, operating hours: 123 h, functionality: fully functional, power: 350 kW (475.87 HP), Type: Mawera FU350RIA, fully automatic wood chip heating system with underfeed firing system. Output: 350 kW. Domestic hot water system with a maximum supply temperature of 95 °C. Year of manufacture: 2001. Nledpfezwuxgox Ahnef Components: Boiler (combustion chamber and heat exchanger), automatic feed auger, ash separator, flue pipes, flue gas fan, documentation, LOGIC control system, electrical control cabinet. Inspection possible in Upper Austria after prior appointment, in disassembled condition. Already disassembled, ready for immediate loading.

Condition: good (used), functionality: fully functional, Used stainless steel auger for sale. This auger was used for dipping diced potato in a preservative before packing but not limited to this. Nledpsvkximofx Ahnof

Condition: used, functionality: fully functional, Complete screw conveyor made of stainless steel. Nlsdpfx Aozp U Acehnef Diameter: ø200mm Length: 4,800mm Manufacturer: DTS

Condition: like new (used), Year of construction: 2011, Offered are 5 screw conveyors from the manufacturer Stetter. As new. Year of manufacture: 2011. Nledpfx Asx Nmwbehnsf

Condition: used, Year of construction: 2016, Milling machines Travel distance X: 661 mm Travel distance Y :407 mm Travel distance Z: 508 mm Number of axis: 3 milling machine / machining center Control: Hurco Max 5 / WinMax spindle chuck: ISO 40 / DIN 69871 spindle revolutions: 10000 rpm Speed range to: 10000 U/min table size X: 762 mm table size Y: 406 mm max. workpiece weight: 1500 kg tool changer: 20 - time input Power : 11 kW Torque: 72 Nm Rapid traverse: 28 m/min spindle cooling chip conveyor Nedpfjzwnfyjx Ahnjlf CNC vertical machining center HURCO VM10i, year 2016, equipped with HURCO MAX 5 control and WinMax software. Travels X/Y/Z: 661 x 407 x 508 mm. Table size: 762 x 406 mm, max. table load 1,500 kg. Spindle speed up to 10,000 rpm, spindle power 11 kW, torque 72 Nm, ISO 40 tool holder. 20-position automatic tool changer, rapid traverse 28 m/min, coolant system and chip auger

Condition: used, functionality: unexamined, Year of construction: 2006, Various conveyor screws for sale: 1 distributor screw, diameter 100 cm / pitch 7.9 m = €6,000 net 1 conveyor screw, diameter 60 cm / length approx. 6 m = €2,000 net Nedpfxszulg Ae Ahnslf 1 conveyor screw, diameter 60 cm / length approx. 5.5 m = €2,000 net

Condition: good (used), A good used Enflex Sachet Machine configured for duplex operation - twin auger filler and tooling - infeed screw to auger - loevel probe in auger hopper Nlodezwlh Eepfx Ahnef

Condition: like new (used), Refurbished stainless steel dosing screw, auger, filling machine, screw dosing Coarse and fine dosing Screw flights can be quickly disassembled for cleaning Motor power 1.1 kW and 0.75 kW See our other listings VMA Nlodpfxjwygbbo Ahnof

Condition: used, Year of construction: 2013, functionality: fully functional, overall weight: 4,000 kg, smoke pipe connection diameter: 200 mm, nominal heat output: 300 kW (407.89 HP), space requirement length: 4,040 mm, space requirement height: 2,250 mm, space requirement width: 5,150 mm, temperature: 95 °C, total height: 2,250 mm, total length: 3,450 mm, total width: 1,250 mm, operating pressure: 5 bar, Equipment: documentation/manual, Gilles HPKI-K 300 – 300 kW industrial wood chip boiler – 2013 For sale is a Gilles HPKI-K 300 industrial wood chip-fired biomass boiler, with 300 kW nominal output, with a 2013 year of manufacture. A particularly important advantage of the equipment is the 2013 model year, which is considered exceptionally young in this capacity category and among industrial biomass boilers. Technical data: Manufacturer: Gilles Type: HPKI-K 300 Year of manufacture: 2013 Nominal output: 300 kW Water volume: 1 100 liters Maximum operating temperature: 95 °C Maximum operating pressure: 5 bar Electrical connection: 400 V / 50 Hz Maximum current consumption: 28 A Maximum electrical power: 18 kW Fuel: wood chips Wood chip size class: G50 / G100 Moisture content: W40 The Gilles is currently part of the Hargassner group, so the service background, technical support and spare parts supply remain ensured for Gilles biomass boilers. The boiler will be dismantled on Monday, August 31, 2026, and Tuesday, September 1 at its current installation site. This is a particularly good opportunity for the buyer because the equipment can be loaded and transported directly from the dismantling site to the buyer, so it is not necessary to transport it to our warehouse in Hungary first. Direct onsite removal allows for significantly more favorable conditions, as in this case, additional costs for transport to the Hungarian warehouse, repeated loading, handling, and storage do not arise. The equipment includes: Njdozwkrpjpfx Ahnolf Gilles HPKI-K 300, 300 kW boiler 2 red transport augers Complete control cabinet / control system Motorized stoker auger / feeding unit, which feeds the wood chips directly into the boiler The related accessories visible in the photos If the equipment must first be transported to our warehouse in Hungary and stored there, the sale conditions will change accordingly, as the extra transport, loading, handling, and storage costs can mean thousands of euros in additional expenses. Optional complete wood chip extraction system Upon request, a complete, original Fröling spring-arm wood chip extraction system is also available separately from our warehouse, which includes: Spring-arm extraction system Transport auger Electric motor Gearbox The complete Fröling extraction system can also be purchased together with the Gilles boiler. Current pricing and exact conditions will be provided upon inquiry. In case of direct onsite removal, the schedule must be coordinated prior to dismantling.

Condition: like new (used), Year of construction: 2021, functionality: fully functional, machine/vehicle number: 1183016, travel distance X-axis: 1,270 mm, travel distance Y-axis: 508 mm, travel distance Z-axis: 635 mm, workpiece length (max.): 1,270 mm, workpiece width (max.): 635 mm, workpiece height (max.): 508 mm, workpiece weight (max.): 794 kg, table width: 475 mm, table length: 1,321 mm, overall weight: 6,033 kg, spindle speed (max.): 12,000 rpm, spindle motor power: 2,240 W, number of spindles: 1, number of slots in tool magazine: 30, input voltage: 400 V, type of input current: three-phase, Equipment: chip conveyor, MACHINE Vertical machining center, HAAS, VF-4SS STANDARD EQUIPMENT: CNC control, 4 axes, HAAS type (NGC version), compatible with Fanuc, ISO programming, G-codes ISO40 spindle taper, CT type 1 GB memory capacity 15" LCD monitor, touchscreen and USB port Ethernet + WiFi network card Early voltage drop detection module (prevents the effects of voltage drops) HaasConnect – remote monitoring of machine operating status via the Internet, VNC and DPRNT protocol Program restart – ability to start the program from any block RunStopJogContinue – ability to move the tool without interrupting the program SafeRun – active anti-collision system (minimizing the effects of collisions) Electronic handwheel Spindle cooling system Temperature compensation for ball screws Protective cabin with sliding front doors and side windows Side magazine with 30 positions Memory lock Spindle taper air blow system Thread cutting without a compensating chuck (rigid) Installation for connecting compressed air Cooling system with a pull-out coolant tank, filled with coolant Automatic central lubrication system Machine tool lighting "Guns" for air and coolant (mounted on the front of the machine) 4AXD – Machine preparation / connections, wiring / For connecting the table, without a table AUGER – Screw chip conveyor HSM – Faster processor with look-ahead function, accelerating the machining of shapes with 3-axis interpolation ACF – Additional 25 μm filtration system, essential for machining cast iron, aluminum, wood, and phenol-based and other dusty materials TSC* – Through-spindle cooling, pump with increased power /21 bar, 22 l/min/ (ACF option required) WIPS-R – Renishaw probe set, wireless, for measuring tool radius and length, for measuring and setting using (graphic) measuring cycles. Nlsdpfjzt Nlmsx Ahnef SO – Spindle orientation MACRO – Parametric programming COORD – Scaling and rotation of the coordinate system VPS (Visual Programming System) – graphic machining cycles, expansion and creation of custom cycles

Year of construction: 2003, condition: used, machine/vehicle number: 143912, Stainless steel screw conveyor in a plastic housing (made of stainless steel), manufactured by Bruynooghe in 2003. Screw diameter: ø500mm Nlsdpfx Ahezmfpbsnjf Length: approx. 10,250mm Suitable for food processing applications.

Year of construction: 2017, operating hours: 1 h, condition: used, functionality: fully functional, INTEGRATED DRYERS AND PELLETING SYSTEM WOOD SHAVINGS DRYING Njdew Hgbhopfx Ahnolf OLIVE POMACE DRYING FULL AUTOMATION WITH VARIABLE SPEED MOTORS STAINLESS STEEL FEEDING AUGERS CONVEYOR TRANSPORT SYSTEMS FUEL AND PRODUCT FEED BUNKERS 9 METER STAINLESS ROTARY DRUM 15 METER IRON ROTARY DRUM 8 MILLION KCAL SOLID FUEL BOILER WITH FULL CAPACITY, IT HAS THE LARGEST WOOD SHAVING DRYING CAPACITY IN TURKEY AT 15–20 TONS/HOUR. IN ACCORDANCE WITH EUROPEAN STANDARDS FOR DETAILED INFORMATION, PLEASE CONTACT US

Condition: used, Auger diameter: 35 cm Length: 385 cm Discharge opening: 45 cm x 33 cm Infeed width: 217 cm Infeed height: 175 cm Nljdpfx Ahexz R Raonjf

Condition: good (used), Year of construction: 2011, operating hours: 18,400 h, travel distance X-axis: 860 mm, travel distance Y-axis: 630 mm, travel distance Z-axis: 550 mm, total height: 2,721 mm, total length: 3,420 mm, total width: 2,200 mm, overall weight: 6,800 kg, spindle speed (max.): 12,000 rpm, operating hours of spindle: 6,550 h, number of spindles: 1, number of slots in tool magazine: 30, Equipment: chip conveyor, documentation/manual, Control system: Fanuc 0i-MD Nodpfx Ajzwf T Ujhnjlf Travel range X / Y / Z: 860 / 630 / 550 mm Rapid traverse rate X / Y / Z: 36 / 36 / 36 m/min Spindle taper: SK40 Spindle speed: 12,000 rpm Spindle power: 15 kW (S1) Max. spindle torque: 127 Nm Coolant through the spindle: 20 bar Main spindle cooler: Yes Tool magazine: 30 tools Tool change time: 2 s Chip conveyor: Double auger + chip conveyor Cabin flushing: Rear and sides Rotary table on the table: Ø 400 mm Max. diameter on the table: Ø 630 mm Max. table load: 200 kg Clamping system length: 96 mm 3D measuring probe: Renishaw OMP Mist extraction: Losma Darwin 1200 Handwheel / manual pulse generator: Yes Interfaces: Ethernet, CF card, serial Machine weight: 6,800 kg Machine dimensions L x W x H: 3,420 x 2,200 x 2,721 mm

Condition: used, empty load weight: 5,900 kg, maximum load weight: 30,100 kg, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 11/2014, loading space length: 9,600 mm, loading space width: 2,440 mm, loading space height: 2,100 mm, loading space volume: 49 m³, suspension: air, tire size: 385/65R22.5, color: white, mileage: 1,001 km, gearing type: other, driver cabin: other, Equipment: ABS, Vehicle location: Bovenden, aluminum body, 3 axles, SCB axles (disc brakes), air suspension, 1st axle can be lifted, raising and lowering function, ABS (anti-lock braking system), roll tarp, catwalk, grain discharge chute, flap, U-shaped protection, side aluminum fender, supports. Nlsdjzwvyxspfx Ahnsf Body: 3-axle aluminum tipper with roll tarp, work platform & grain auger, approx. 49 m³, 3 x 9-ton SCB axles, disc brakes, 1st axle can be lifted! ACCESSORY INFORMATION WITHOUT GUARANTEE, subject to changes, prior sale, and errors!

Condition: like new (used), Year of construction: 2008, Tipping Device and Concrete Spreader VOLLERT WECKENMAN Nedpfxexza Nfo Ahnjlf Year 2008 Never used Lifting device capacity: 5 tons. With synchronized control Concrete spreader cover: 7.5 tons, with internal blade auger In perfect condition

Condition: used, Year of construction: 2011, TM Bohrtechnik TMB 25 drilling rig, year of manufacture: 2011, compressor operating hours: 5,308h, diesel engine operating hours: 8,002h, 5x drill rods, drilling head, dust collector, immediately ready for use, good condition, German machine. Upon request, we can provide you with a leasing or financing offer from Mercedes-Benz Bank. Mr. Ebert (Tel.) will be happy to assist you. Further information is available on our website. Subject to prior sale and errors! = Further Information = Nlodpszm Eq Eefx Ahnof Intended use: Construction Please contact Tobias Ebert for more details.

Condition: excellent (used), Year of construction: 2016, operating hours: 13,000 h, functionality: fully functional, Vertical machine center Haas VM 6 with below options 12000 rpm spindle HSS Nsdpfx Aoyb S U Ujhnjlf Touch probe Tool setter Through spindle coolant chip auger

Condition: used, Stainless steel dosing screw, pipe screw, auger Diameter: 150 mm Motor power: 1.1 kW, 148 rpm Entirely stainless steel Nedpfx Aex Nykhshnelf See our other listings VMA Wekerom

Condition: excellent (used), Year of construction: 2020, machine/vehicle number: 06220420, functionality: fully functional, operating hours: 100 h, power: 7 kW (9.52 HP), input voltage: 380 V, input frequency: 50 Hz, cutting width (max.): 460 mm, control type: NC control, actuation type: hydraulic, rotational speed (max.): 80 rpm, rotational speed (min.): 20 rpm, total height: 1,900 mm, total length: 2,820 mm, total width: 2,200 mm, overall weight: 2,300 kg, Equipment: documentation/manual, Double-column structure, with a round-section main sliding column and a rectangular-section secondary column. CNC with touch-screen for programming the head lift, clamping, and piece feeding, inverter-controlled blade speed adjustment, and a feed repeater settable from 1 to 9 times. Blade descent controlled by a probe, workpiece feed roller conveyor. Carbide blade guides and bearings, hydraulically locking clamps, auger chip conveyor, coolant system, lighting system, motorized blade cleaning brush, hydraulically adjustable belt tension. Operation and maintenance manual. With Extra 2m roller table 1pc (500mm width) NO CE mark, NO CE declaration of conformity Nljdpsyvh Nxofx Ahnjf

Condition: new, Year of construction: 2025, functionality: fully functional, Filling system consisting of the following components: 1. Cross Trough: Trough width: 2.8 m Trough height (lower side): only 0.8 m Trough depth: 1.2 m incl. protective grid on top incl. 3 kW gear motor left and right versions available Optional: chassis, forklift adaptation, .... 2. Inclined Screw Conveyor: Length: 2 m (other lengths available upon request) Variable inclination incl. 3 kW gear motor 3. Feed Screw: Length: 2 m (other lengths available) Open on the end face Nsdpfx Asvrcfujhnolf All screw conveyors have a diameter of 200 mm and are continuously welded onto a steel tube! (Larger screw diameters also available upon request!) Without wiring and control system We are also happy to offer you custom-made designs! Prices excl. VAT.

Condition: used, Conveyor screws, auger, screw conveyor Heavy-duty design, suitable for large capacities. Dimensions: 1x Conveyor screw, diameter 470mm, L: 4000mm 1x Conveyor screw, diameter 320mm, L: 3800mm (excluding electric motor) 1x Conveyor screw, diameter 420mm, L: 3550mm 1x Conveyor screw, diameter 420mm, L: 4050mm Equipped with heavy-duty external bearings with shaft seals. Available for sale individually or as a lot. For more information, please contact us. Nedpfeyhblpsx Ahnjlf See our other listings. VMA Wekerom

Condition: used, Year of construction: 2011, functionality: unexamined, For sale: container with extraction augers. The container was used as a buffer in a straw pellet manufacturing facility. Nedpfx Aewy T R Nohnslf Container dimensions: Height: 7750 mm, Width: 2150 mm, Depth: 3140 mm, Rail height on container: 900 mm, Container capacity: approx. 40 m3, Discharge window size: 1000x350 mm 3 extraction augers, each 1.1 kW The container has been disassembled and is ready for transport. For more photos and details, please contact me. Machines available for inspection in Sępólno Krajeńskie, Kuyavian-Pomeranian Voivodeship, Poland.

Condition: used, functionality: fully functional, mileage: 3,28,483 km, power: 265 kW (360.30 HP), first registration: 04/2002, fuel type: diesel, maximum load weight: 26,000 kg, overall weight: 26,000 kg, axle configuration: 6x6, next inspection (TÜV): 05/2027, color: white, driver cabin: day cab, gearing type: mechanical, emission class: euro3, suspension: parabolic leaf (spring), loading space volume: 10 m³, Year of construction: 2002, operation weight: 18,760 kg, Equipment: ABS, all wheel drive, crane, differential lock, hydraulics, trailer coupling, The box has a hydraulic opening on the left side. The crane is a powerful CORMACH 38000E2 with hydraulic motor and auger. It has trailer installation. Remote radio control of the crane. The truck bed features hydraulic opening on the left side. It is equipped with a powerful CORMACH 38000E2 crane, complete with hydraulic motor and auger. The truck also includes a tow hook, trailer connection, and a winch. The crane is operated via remote radio control. We purchased the truck in Poland with 14" rims and tires (included in the price), but they wore out quickly on the road, so we replaced them with standard 12.5" rims and tires. The truck is used occasionally in our company, but it is generally surplus to our needs, so we are selling it. We have replaced the electrical installation, and the vehicle is in working condition. Njdpfxsnmycxs Ahnjlf