Used Auger for sale (368)

Condition: good (used), Ward Bekker Auger Filler Psdpfx Apsy Ax Rgohogr Stainless frame, 25Kg stainless agitated hopper, 35mm diameter screw, with foot pedal, mobile, 3Ph

Year of construction: 2012, operating hours: 3,500 h, condition: used, functionality: fully functional, P System fully automated hydraulic pelleting line with patented hydraulic pelleting system. Mono roller, hydraulically operated with a unique load sensing system. Features automatic vegetable oil injection at startup and shutdown. Continuous rated production 350kg/hr (peak 500kg/hr) - Fully automatic, operates without human intervention. In its current setting it worked 12hrs continuously alongside log production, but can operate continuously if required. Line includes the following:- 50m³ moving floor container with hydraulic operated lid. Material level viewing windows, and unloading cross auger. Incline discharge auger with magnetic separator. First stage hammer mill for material up to P16 (G30). Pneumatically conveyed to minisolo. Mini silo distribution hub with hydraulic agitator. Equipped with cyclone and transfer fan. The unit has an additional port covered with a blanking plate to allow addition of another pelleting module. Second stage hammer mill and rotary valve controlled by pelleting module. Podpfxezcf Dle Aphsgr P300 - 30kW pelleting module with PCL control system. All motors other than the main drive are hydraulic and controlled by the pelleting module. The system has a moisture sensor which injects water into the second stage hammer mill to control pellet quality. Die temperature is monitored by a temperature probe and controlled by compressed air injection. Automatic oiling system on startup and shutdown. 6m Discharge cooling and screening auger. Pellets are conveyed, cooled and screened for dust by hydraulically driven auger. Double filter air extraction unit. The line is in good condition and comes with a set of spare parts, dies and rollers. PCL control unit and main drive gearbox were replaced over a year ago. It has been serviced well and can be demonstrated working if required, with your material. Not included in offer, but available by request 4000L pellet hopper made from galvanised steel metal, with pneumatically operated hopper. Semi-automatic bagging plant, 5kg - 30kg capacity. Plastic sack heat sealer. Pellet quality test equipment. 5m Bucket elevator made by Perrys of Oakley.

Condition: new, functionality: fully functional, Year of construction: 2025, NEW! Professional quality with reinforced 4-square shank. Hydraulic earth auger set Ø150/200/300 mm ❗ ONLY €899 ❗ Warehouse clearance – available immediately! ⭐ NEW – unused – ready for immediate use! ⭐ Complete set including 3 augers + motor + extension ⭐ OPEN-S mount – flexible & universally adaptable ⭐ Significantly below market price! ❗ Reinforced design: All augers feature a robust 4-square shank. This ensures maximum power transmission, high stability, and significantly increased resistance to twisting and stress. ⭐ SCOPE OF DELIVERY: ✔ 3 drilling diameters (150 / 200 / 300 mm) ✔ Hydraulic motor ✔ Hydraulic hoses ✔ OPEN-S mount Everything new. Everything included. No need for additional purchases. ⭐ Advantages of the OPEN-S mount ✔ Universally adaptable ✔ Ideal for workshop conversions ✔ Perfect for export ✔ Quickly adaptable to various machines ✔ Saves expensive quick-change adapters The open mount offers maximum flexibility during assembly and is ideal for individual adaptations to various excavators and mini-excavators. ⭐Depending on the model, suitable for mini-excavators between 1.8 t and 2.5 t. The difference lies in the pin diameters and distances. Pedpjylk Nrjfx Aphegr Please specify the machine type or pin dimensions when requesting information. ⭐Perfectly suited for: ✔ Fence construction ✔ Foundation work ✔ Screw foundations ✔ Planting holes ✔ Garden and landscape construction ✔ Construction and agricultural projects Shipping and collection possible – warehouse in Rheda-Wiedenbrück Contact us at any time – quick response!

Condition: used, axle configuration: 3 axles, first registration: 02/2007, total length: 11,350 mm, total width: 3,850 mm, total height: 2,550 mm, suspension: air, tire size: 385/65 R22.5, color: other, Year of construction: 2007, Equipment: ABS, = Additional options and accessories = - Air suspension - Disc brakes = More information = Make axles: BPW Brakes: disc brakes Suspension: air suspension Rear axle 1: Tyre size: 385/65 R22.5; Lift axle Pjdpjzw E Ulofx Aphegr Rear axle 2: Tyre size: 0 Rear axle 3: Tyre size: 0; Steering Empty weight: 7.680 kg Price: On request

Condition: excellent (used), axle configuration: 3 axles, first registration: 12/2004, total length: 11,090 mm, total width: 2,550 mm, total height: 3,800 mm, suspension: air, tire size: 385/65 R22.5, color: other, Year of construction: 2004, Equipment: ABS, = Additional options and accessories = - Air suspension - Air suspension system = Remarks = TRANSPORT TO ANTWERP 590 EURO = More information = Axle configuration Make axles: BPW Suspension: air suspension Rear axle 1: Tyre size: 385/65 R22.5 Rear axle 2: Tyre size: 0 Rear axle 3: Tyre size: 0 Weights Empty weight: 8.020 kg Carrying capacity: 29.980 kg GVW: 38.000 kg Podszw Hlfopfx Aphsgr Condition Technical condition: very good Visual appearance: very good Financial information Price: On request

Condition: used, Year of construction: 2016, functionality: fully functional, travel distance X-axis: 660 mm, travel distance Y-axis: 406 mm, travel distance Z-axis: 508 mm, rapid traverse X-axis: 24 m/min, rapid traverse Y-axis: 24 m/min, rapid traverse Z-axis: 24 m/min, controller manufacturer: Hurco, controller model: WinMax, workpiece weight (max.): 681 kg, total height: 2,519 mm, total length: 1,800 mm, total width: 1,671 mm, table width: 406 mm, table length: 762 mm, table load: 681 kg, overall weight: 2,818 kg, spindle speed (max.): 10,000 rpm, distance table to spindle center: 101 mm, distance table center to spindle nose: 610 mm, spindle motor power: 11 W, spindle nose: ISO40, number of spindles: 1, number of slots in tool magazine: 20, tool length: 25 mm, tool diameter: 89 mm, tool weight: 7 g, Equipment: chip conveyor, documentation/manual, Used Hurco VM10i vertical machining center, ideal for companies seeking precision, reliability, and productivity with a reasonable investment. This machine is perfect for mechanical workshops, subcontractors, and manufacturers of components for automation, automotive, hydraulics, and general mechanical applications. It features a robust structure, high precision, and excellent performance in milling, drilling, and tapping operations. The machine is in good working condition and ready for immediate integration into production. Available for inspection and testing at our facility. The machine is complete with: * Auger-type chip conveyor with side discharge * High-pressure pump Psdpezcpu Ijfx Aphsgr * Digital manuals * CE declaration of conformity

Condition: used, Dosing screw, screw conveyor, auxiliary feed screw Material: stainless steel Motor power: 1.5kW 85rpm Inlet dimensions: 770x410mm Screw flight diameter: 220mm VMA Wekerom Pjdpfxewyf Imo Aphegr See our other listings

Condition: not inspected (used), Item: D-10737-Auger Bulk Feeder Stainless Steel Bulk Feeder with weight Stainless Steel auger Ø6" (150 mm). Dimension: Bulk L 980 mm X W 980 mm x H 700 mm Auger: Max H 2400 mm Discharge 1900 mm Opening at bulk top: 700 x 700 mm Pgsdpfx Aehn S Efopher One side at wheels

Condition: like new (used), Year of construction: 2020, operating hours: 395 h, functionality: fully functional, machine/vehicle number: 980-416, total width: 2,098 mm, total height: 1,405 mm, total length: 2,316 mm, briquette diameter: 80 mm, overall weight: 1,800 kg, type of input current: three-phase, input current: 28 A, input frequency: 50 Hz, input voltage: 400 V, oil tank capacity: 250 l, Equipment: cooling unit, emergency stop, WEIMA TH 814 Briquette Press! Top condition! Like new! Available immediately! Private sale (no VAT can be declared)! Operating hours: only approx. 400 hours The WEIMA TH 814 is a robust hydraulic briquetting press for industrial applications. It processes wood and biomass waste into highly compressed cylindrical briquettes with a diameter of 80 mm. The machine is designed for reliable continuous operation and offers high energy efficiency as well as a compact design for easy integration into existing plants. Model: WEIMA TH 814 Briquette diameter: 80 mm Applications: Wood, biomass, paper, plastic waste Year of manufacture: 2020 Throughput rate: up to approx. 180 kg/h Hydraulic motor: 11 kW Hydraulic system: automatic operation, suitable for continuous duty Weight: approx. 1,800 kg Dimensions (L × W × H): approx. 2,098 × 2,316 × 1,405 mm Hydraulic oil capacity: approx. 250 liters Feed hopper: approx. 1,400 × 1,400 mm Briquette length is adjustable and can be regulated via the feed auger's speed. Depending on the feed material rate into the pressing chamber, the briquette length will vary. The control is managed by a time relay in the control cabinet, which determines the running time of the feed auger's motor. The machine has seen little use and is in very well-maintained condition. Sale due to underutilization. Trial run on-site possible. Loading on-site possible. Original operating manual (Hungarian) available. A German version can be provided by the supplier if needed. The integrated hydraulic system is equipped with automatic oil preheating and oil-cooling function. This ensures an optimal temperature range of the hydraulic oil, even at low ambient temperatures or during continuous operation. This allows reliable 24/7 continuous operation of the machine. The price is set fairly considering the condition and very low operating hours. Inspections can be arranged at short notice by appointment. Pgedpfx Aey Af T Iophsr If interested, I look forward to your message.

Condition: used, functionality: fully functional, power: 55 kW (74.78 HP), fuel type: gas, color: blue, axle configuration: 4x4, fuel: liquid petroleum gas (LPG), gearing type: hydrostat, Year of construction: 2005, operating hours: 3,102 h, Equipment: all wheel drive, Iceresurfacer: + Dupon + OKAY 3000 + 4-cylinder VW gas engine, 75 HP + All-wheel drive + Hydrostatic drive + Snow tank + Water tank + Side broom + Rink board limiter + Augers / blades Pgjdsy Enw Uopfx Aphsr + Year of manufacture: 2005 + 3,102 operating hours Municipal vehicle from first owner. Receive all newly listed vehicles by email – subscribe to our NEWSLETTER! Errors and typing mistakes possible, subject to prior sale!

Condition: excellent (used), Year of construction: 2013, FEELER VB-1650 CNC Vertical Machining Centre Control FANUC 31i-TB Year 2013 Table size 800 x 1900 mm Travels XYZ 1650 x 800 x 700 mm Spindle nose to table 145-845mm Spindle centre to column 850mm Pedozd Dfispfx Aphjgr Spindle speeds to 8000 rpm Spindle taper BT 40 Spindle motor 26 kW Number of tools 30 ATC Rapid traverse X & Y 20 m/min, Z 18 m/min Weight 13000 kg Supplied wtith: Part probing, BLUM tool probe, Swarf Augers, Swarf conveyor, Spindle chiller, Filtermist FX7002. Tooling Package. For sale with *Jet Machinery Ltd* Jet Machinery Stock No: #27002 Machine Serial Number: VHE133 Cost: £39,950.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: like new (used), functionality: fully functional, Year of construction: 2018, machine/vehicle number: DN2645 /4434, Technical specifications: 1 Schmalz column-mounted swing jib crane, model NL 50KG, year of manufacture 2018 Crane is available in quantities of 2!!! Load capacity at full extension: 50 kg Schmalz vacuum unit with Jumboflex 50 kg suction lifter (quick-change system for additional workshop tools) Overall height: approx. 2.52 m, outreach: approx. 1.8 + 1.25 m, lower boom: approx. 2.35 / 2.5 m Base plate: 30 x 30 cm Total weight approx. 300 kg including vacuum unit Connection to 400V 16A, swivel range 270 + 90° Crane is disassembled and packed on a pallet Item location: 75053 Gondelsheim Only the crane system shown in the pictures is being sold Very good condition - almost new. See pictures Shipping via freight forwarder or collection by appointment. Pjdpfezvrn Ajx Aphegr

Condition: used, Year of construction: 2023, functionality: unexamined, Mespack H-140S powder sachet machine (2023) 5g-100g, up to 100 sachets per minute Pgedpfezbc Ewsx Aphor With hopper, auger and ICE Zodiac printer

Condition: ready for operation (used), Year of construction: 2005, functionality: fully functional, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,250 mm, travel distance Z-axis: 1,500 mm, feed rate X-axis: 30 m/min, feed rate Y-axis: 30 m/min, feed rate Z-axis: 30 m/min, spindle speed (max.): 6,000 rpm, table width: 1,100 mm, table length: 3,500 mm, total height: 4,164 mm, total width: 5,875 mm, total length: 9,120 mm, rotational speed (max.): 6,000 rpm, workpiece weight (max.): 8,000 kg, overall weight: 29,000 kg, torque: 760 Nm, Fixed-bed milling machine, Nicolás Correa BRAVA-30, built in 2005. Working table measuring 3,500 × 1,100 mm with six 22 mm T-slots and a maximum permissible load of 8,000 kg. Axis travels of 3,000 mm in X, 1,250 mm in Y and 1,500 mm in Z. Automatic UAD milling head with 0.1° indexing on both swivel axes and hydraulic tool clamping, ISO 50 spindle taper to DIN 69871. Front bearing diameter of 85 mm. Constant torque of 760 Nm between 20 and 375 rpm. Main spindle rated at 30 kW with constant power from 375 to 6,000 rpm and a speed range of 20 to 6,000 rpm. Cutting feed of 30 m/min and maximum acceleration of 12 m/s². Ball screws measuring 80×30 mm on the X axis, 50×20 mm on the Y axis and 63×25 mm on the Z axis. Pedpfxoulwy As Aphegr Heidenhain workpiece touch probe fitted, plus provision for a Renishaw measuring probe. Portable handwheel. External coolant system together with internal coolant supply through the spindle. Chip removal by two screw-type augers and one lateral hinged-belt conveyor. Fully enclosed guarding. Approximate overall dimensions of 9,120 × 5,875 × 4,164 mm.

Condition: used, Model hollow screw steel Diameter 280 mm Housing / cover stainless steel Length 8.65 m Manufacturer: TMG Type: SS06 year of construction 2001 Pgjdpfx Apsrpaqpehsr

Condition: used, FULL-BODY AUGER STEEL, TOTAL APPROX. 7,49 M Psdpjrn Uxiofx Aphsgr Type: Full-body auger steel Diameter: 160 mm Round housing: galvanized steel Complete length: 7.49 m Length: from round housing with motor and gearbox

Condition: like new (used), Year of construction: 2014, functionality: fully functional, total length: 2,610 mm, total width: 1,100 mm, total height: 1,030 mm, WILK MAREL – a machine for grinding fresh and frozen products. The machine can be used as a stand-alone unit or as part of an integrated production line. Power: 45 kW Voltage: 3x400V – 50 Hz or as required Control voltage: 24 V DC Material: AISI 304 stainless steel Pgjdpfezlgvgox Apher Auger: stainless steel Hopper capacity: 300 l Cutting blade: ø250 mm

Condition: like new (used), functionality: fully functional, Year of construction: 2023, machine/vehicle number: DN855, Technical data: 1 Schmalz – Column-swiveling crane NL 50KG – Year of manufacture 2023 Payload at full extension: 50 kg Schmalz vacuum unit with Jumboflex 50 kg suction lifter (quick-change system for other tools) Overall height: approx. 3.75 m, extension: approx. 4.6 m, lower arm extension: approx. 3.2 m Lifting height: approx. 0.25 m – 2.2 m Base plate: approx. 50 x 50 cm Total weight approx. 300 kg including vacuum unit Connection to 400V, 16A, swiveling range 270° Crane is disassembled and packed on a pallet Item location is 75053 Gondelsheim Podpozv Ekdsfx Aphsgr Only the crane system shown in the pictures is sold Very good condition – almost new. See pictures Shipping via freight forwarder or collection by appointment

Year of construction: 2020, condition: excellent (used), hopper with an integrated conveyor belt, featuring a metering screw at the front. Length: 9 meters, width: 2 meters. Pedpfx Aoilqfqophegr

Condition: excellent (used), Year of construction: 2011, operating hours: 7,000 h, functionality: fully functional, travel distance X-axis: 1,100 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 560 mm, rapid traverse X-axis: 42 m/min, rapid traverse Y-axis: 42 m/min, rapid traverse Z-axis: 42 m/min, controller model: FANUC 21iMB, overall weight: 7,500 kg, spindle speed (max.): 12,000 rpm, spindle nose: BT-40, number of slots in tool magazine: 30, Equipment: documentation/manual, rotational speed infinitely variable, The used VICTOR A110 vertical machining center is a small/medium-sized 3-axis continuous CNC machining center; table size 1350×600 mm, X travel 1,100 mm, Y 600 mm, Z 560 mm, year of manufacture 2011 (installed in 2013), CE-compliant, equipped with FANUC 21i-MB CNC with Manual Guide i, rapid feed of 42 m/min, axis acceleration of 0.75G, working feed of 12 m/min, weight 7,400 kg. Pedpfxjx Hap Ee Aphsgr It is equipped with a BT-40 milling spindle, 12,000 rpm, 15 kW, cooled by dedicated chiller, belt-type chip conveyor, double internal auger, tank washing system, high-pressure through-spindle coolant, 32-position random tool changer, door, memory card slot, Ethernet RJ 45 port, and RS 232 serial port. Only just over 13,000 power-on hours and 7,000 spindle hours (original). PERFECT WORKING CONDITION!

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, machine/vehicle number: PV10150642, MACHINE SPECIFICATION Table size 1200 x 480mm X axis traverse 1050mm Y axis traverse 540mm Z axis traverse 560mm Spindle nose to table 80 – 640mm Spindle BT 40 Spindle speeds 20 – 10,000rpm Spindle motor 15kW Rapid feed rate X/Y/Z 32/32/24m/min Toolchanger capacity 24 Tools Approximate weight 6600Kg MACHINE EQUIPPED WITH: - Siemens 828D CNC control Swarf auger Coolant system Lighting Guarding Pgjdpfezguf Sox Aphsr

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, machine/vehicle number: 1162068, SPECIFICATION Table size 1370mm x 620mm X axis traverse 1016mm Y axis traverse 660mm Z axis traverse 635mm Spindle nose to table 102 – 737mm Spindle BT40 Spindle speeds 0-12,000rpm Spindle motor 22.4kW Rapid feed rate 18m/min Toolchanger capacity 30+ 1 tools Approximate weight 7750Kg MACHINE EQUIPPED WITH: - Haas CNC Control Swarf auger High speed machining Co-ordinate rotation and scaling Rigid tapping Pgedpfx Aozr H Tlepher 5 off BT40 toolholders Filtermist extraction system Programmable coolant nozzle Lighting Guarding

Condition: excellent (used), functionality: fully functional, Year of construction: 2018, machine/vehicle number: DN4462 / 4520, 1 Schmalz – Column-swiveling crane with extension + Vacumaster Comfort Window The crane is available in 2 identical units!!! Load capacity at full extension: 200 kg Schmalz swiveling crane SK-KZG-CON (extending crane) load capacity 200 kg with suction lifter VM-Comfort-H-CON Suction cup diameter: 37 cm! Load capacity: 150 kg Year of manufacture: 2018 Overall height: approx. 3.35 m, reach: approx. 3.1 m + 1 m extension = 4.1 m Distance from the base to the upper boom: approx. 2.63 m Distance from the base to the upper boom: approx. 2.42 m Hook height, chain hoist: approx. 2 m Maximum height of suction lifter in the center: 1.7 m Base plate: 50 x 50 cm Total weight: approx. 400 kg Connection: 400 V, 16 A, swiveling range: 270° Pjdjzvrcaspfx Aphogr The crane is disassembled and packed on a pallet. The item is located in 75053 Gondelsheim. Only the crane system shown in the pictures is being sold. Very good condition, almost like new. See pictures. Shipping by freight forwarder or collection by appointment.

Condition: used, Year of construction: 2009, Fröling Turbomat 500 – Wood Chip Biomass Boiler (2009) ⚙️ Technical Data • Model: Fröling Turbomat 500 • Year of manufacture: 2009 • Rated output: 450 kW (W40) • Maximum output: 495 kW • Water capacity: 750 liters • Operating pressure: 6 bar • Max. temperature: 110 °C • Weight: approx. 6,800 kg • Manufacturer: Fröling Heizkessel- und Behälterbau GmbH – Austria ⸻ 🔩 Key Features • Fully automatic ash removal and heat exchanger cleaning • Four-layer, refractory high-temperature combustion chamber with chamotte lining • Water-cooled feed channel – suitable for fuels with higher moisture content • Stoker grate with continuous, efficient fuel combustion • Lambda control system with multi-zone air management and low emissions • Automatic draft and induction fan control • Heavy-duty industrial construction, maintenance-friendly design • Fuels: Wood chips (G30–G50), pellets, sawdust, biomass ⸻ 💡 Advantages • High efficiency, fully automatic operation • Low maintenance requirements, long service life • Reliable performance even with fuels with higher moisture content • Ideal for industrial and municipal heating systems ⸻ 📍 Location: Mosonmagyaróvár, Hungary TOP HEATING SYSTEMS – Used heating systems, boilers, heat pumps & accessories direct from stock We are a family business with around 20 years’ experience in the heating technology sector. We have a 1,500 m² warehouse in Mosonmagyaróvár, Hungary, with a continuously available stock of approximately 50–60 units. Podpfx Aoxmrwfsphegr 📍 Location: Our warehouse is located in Mosonmagyaróvár, Hungary – about 15 km from the Austrian border and approx. 80 km from Vienna. Mosonmagyaróvár is the first major town on the Hungarian side after the Austrian border. 🔥 Our product range includes: • Wood chip boilers • Pellet boilers • Log wood gasification boilers • Log wood boilers • Biomass boilers • Oil and gas boilers • Heat pumps • Thermoventilators • Hot air blowers • Warm air heaters • Industrial heating systems • Buffer tanks • Heat exchangers • Auger conveyors • Discharge systems • Burners • Pumps • Comprehensive heating accessories ⚙️ Accessories and Components: We also carry a large selection of accessories, including circulation pumps, plate heat exchangers, and many other components – from residential to industrial solutions. 🏭 Brands in our range: Fröling, Hargassner, KWB, HDG, Binder, ETA, Herz, Guntamatic, Windhager, Viessmann, Buderus and many more. 🌐 Current Offers: Most of our current offers can be found on our website: topheatingsystems.com In addition, we have further units available that are not yet listed online. 📅 Viewing: Viewings at our warehouse are available by prior appointment. If you are interested, please contact us – we will be happy to help you find the right solution.

Condition: ready for operation (used), Year of construction: 2010, operating hours: 13,000 h, functionality: fully functional, travel distance X-axis: 1,524 mm, travel distance Y-axis: 660 mm, travel distance Z-axis: 635 mm, spindle speed (max.): 8,000 rpm, Haas VF5/40XT milling machine from late 2010. The machine is connected and operational—ready for work, following the replacement of the X-axis ballscrew. Plexiglass door guards and side covers have been replaced with new ones. Calibration was performed using a Renishaw Ballbar; with further leveling and configuration, even higher precision can be achieved. The machine can be inspected, tested, etc. Purchase including transport, installation, training, leveling, and configuration is possible for an additional fee. Loading for transport is included in the machine price. Spindle taper: ISO40 Pgodpfsy D Enhex Aphor Tool magazine: 40 tools Through-spindle coolant Rigid tapping Macros Auger chip conveyor Spindle orientation X 1524 mm, Y 660 mm, Z 635 mm—the X-axis is extended in the XT series.