Used Automatic Screwdriver for sale (19,745)

Year of construction: 2018, condition: good (used), Fully automatic angle welding machine / Psdpfxjtzcd Se Aqvogl Fully automatic side welding machine Manufacturer: Diez Type: AWS-C 9070 CS Year of manufacture: 2018 Shrink tunnel Manufacturer: Diez Type: HTC 122-40D Year of manufacture: 2018 Operating side: Left, in the direction of travel Passage width: approx. 600 mm Passage height: approx. 190 mm Welding length: approx. 900 mm Working height / belt height, infeed/outfeed: approx. 860 mm + 100 Performance: Up to 30 cycles/min (depending on package size and feed speed) Connection voltage: 230V AC, 50Hz, 1 phase + N + PE Power consumption: 3.5 KW Rated current: 10 A With cable and 16A Schuko plug Compressed air connection: 6 bar External dimensions: Length: 2600 mm Width: 2000 mm Height: 1500 mm 19526

Condition: excellent (used), Automatic topping machine Sormac WOA-3, year of manufacture: 2013. The machine is designed for processing carrots with a diameter of 35 to 45 mm and a length of 175 - 350 mm. The machine trims the tops and tails of carrots. The machine can cut into pieces of 100 or 50 mm. Equipment weight: 2,500 kg. Pedpfoynum Tex Aqvegl Dimensions: 4,250 mm (L) x 2,400 mm (W) x 1,710 mm (H). Compressed air: 6 bar. Drive motor: 1.1 kW. Spindle motor: 2 x 0.55 kW. Conveyor belt: 2 x 0.55 kW. The price quoted is per unit; 3 units available for sale.

Condition: used, Year of construction: 1986, cutting diameter 460 mm saw band length 5334 mm cutting width 1,3 mm Podpfxjtqqrfs Aqvjgl cutting range - square - 320 x 320 mm cutting range - flat - 500 x 320 mm control minipos 807 cutting speed 16 - 80 m/min dimensions of saw-band 5334 x 41 x 1,3 mm feed length 580 mm feed length: multiple 5800 mm total power requirement 8 kW weight of the machine ca. 3,5 t dimensions of machine L x W x H 2,7 x 2,95 x 2,15 m Accessories: roller track 4150 mm length, roller track 2150 mm length, bundle clamping device, chip conveyor, coolant

Condition: used, Year of construction: 1998, saw blade diameter 450 mm cutting diameter 150 mm capacity 90 degrees: flat 330 x 40 mm capacity 45 degrees: round 140 mm capacity 45 degrees: flat 250 x 40 mm cutting speed 10 - 70 m/min saw head feed 0 - 1000 mm/min sawing motor 1,7 / 2,6 kW weight of the machine ca. 1,1 t Accessories: used sawblade 450 mmø, material feeder M 45 NC für autom. run, Pedpfx Asv Hth Aoqvogl ingoing roller track 7000 mm, outgoing roller track 4000 mm

Condition: used, Year of construction: 1994, cutting diameter 520 mm saw band length 7239 mm cutting width 1,3 mm Control POSIMOD cutting range - square - 520 x 520 mm feed length 500 mm feed length: multiple 4500 mm min. cut-off length 6 mm length of rest piece min/max 10 / 100 mm cutting speed 20 - 130 m/min dimensions of saw-band 7239 x 50 x 1,3 mm sawing motor 5,5 kW total power requirement 10,0 kW weight of the machine ca. 3,8 t dimensions of machine L x W x H 3,42 x 2,30 x 2,40 m - 2 column guided - Pgodpfx Aqswm Rm Isvol Accessories: roller track 2500 mm length, chip conveyor, coolant

Condition: used, Year of construction: 2002, turning diameter 16 mm spindle passage 16 mm turning length 160 mm control GE FANUC Series 18 i-T spindle turning speed range 8000 U/min rapid traverse 30 m/min total power requirement 2,2 kW weight of the machine ca. 2,1 t Pedpfxjvh I Tve Aqvegl Accessories: bar loader IEMCA, GENIUS 226-32 L, YOM 2002 (for bar dia. 2 - 26 mm and bar lengths 1500 - 3210 mm); chip conveyor, coolant

Condition: used, Year of construction: 1991, saw blade diameter 400 mm cutting diameter 130 mm capacity 90 degrees: square 120 x 120 mm capacity 90 degrees: flat 220 x 80 mm feed length 600 mm feed length: multiple 1800 mm cutting speed 10/13/15/20/26/30 m/min mitre joint cuts -/+ degrees 60 total power requirement 5,5 kW weight of the machine ca. 1,8 t dimensions of machine L x W x H 2,45 x 1,20 x 2,00 m Pgedpfx Aqjv Hhrvjvel - mitre cutting +/- 60 ° with DRO - Accessories: new sawblade 400 mmø, coolant

Condition: used, Year of construction: 2000, cutting diameter 280 mm saw band length 4930 mm capacity 90 degrees: square 280 x 280 mm capacity 45 degrees: round 280 mm capacity 45 degrees: square 280 x 280 mm capacity 60 degrees: round 220 mm capacity 60 degrees: square 200 x 200 mm feed length 600 mm Pgjdpfxsw En Efo Aqvel feed length: multiple 5400 mm cutting speed 17 - 90 m/min length of rest piece min/max min. 30 mm saw diameter min. 10 mm control KASTO, Compact Control total power requirement 5 kW weight of the machine ca. 1,75 t dimensions of machine L x W x H 2,68 x 2,54 x 1,59 m Accessories: coolant, roller track 3300 mm length, 300 mm width; roller track 1350 mm length, 300 mm width

Condition: used, In this offer you purchase a used fully automatic coffee machine "Selecta LaRhea Cino" Object of sale: 1 x Selecta LaRhea Cino with the following equipment: Please take the equipment from the pictures Drives up - not tested further Condition: This offer is for a used appliance, which may show signs of use (minor scratches or yellowing). Packaging and dispatch: Pgedpfxowln Els Aqvsl You are welcome to view the device during our business hours. Please make an appointment for this! Seaworthy packaging and worldwide shipping available on request! For further information you can of course also contact us personally.

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, POLY-CLIP FCA 3442 | Automatic double-row clipping machine Pgjdpfx Ajy Um Hmjqvsl Manufacturer: Poly-clip System GmbH & Co. KG Model/Type: FCA 3442 Serial number: 235/05 Year of manufacture: 2005 Power supply: 400 V, 3 Ph, 50/60 Hz, 4 A Power: 2.8 kW Working pressure: 5 - 7 bar Dimensions: 970 x 870 x 1820 mm Width of conveyor/discharge rollers: 340 mm The Poly-clip System FCA 3442 is a high-performance, automatic double-row clipping machine and represents an absolute standard in the professional meat processing and sausage manufacturing industry. This machine is designed for medium and large-sized meat processing plants, butcher shops, and companies producing cooked meat products. Its main function is to precisely, quickly, and consistently seal artificial, collagen, and fibrous casings (within the caliber range supported by this model), allowing for the automated continuous formation of sausage sticks, pâtés, and other products. The device works directly with vacuum fillers, receiving portioned filling and automatically applying two clips simultaneously (while also cutting the casing between them). Advanced mechanics and a proven clamping system guarantee ideal casing tension and a tight seal, which directly translates into the aesthetic quality of the final product and the microbiological safety of the products. After clipping, the product is transferred to an integrated roller conveyor with a width of 340 mm, from where it is further conveyed for further thermal processing or packaging.

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, POLY-CLIP FCA 3430 | Automatic clipping machine Manufacturer: Poly-clip System GmbH & Co. KG Model / Type: FCA 3430 Serial number: 859 Year of manufacture: 2011 Power supply: 400 V / 50/60 Hz / 3 phases Psdjy Um E Aopfx Aqvegl Rated current: 4 A Power: 2.8 kW Dimensions: 1600 x 1250 x 2000 mm Machine weight: 595 kg Caliber range: approx. 24 - 60 mm Maximum cycle rate: up to 200 cycles/minute The Poly-clip FCA 3430 automatic clipping machine is an advanced, high-performance device that represents the absolute standard in the meat, sausage, and delicatessen processing sectors. This machine is used for automatically closing casings (both natural casings and collagen, protein, cellulose, and plastic casings) using aluminum clips. It is a key component in medium-sized and large meat processing plants for the mass production of sausages, frankfurters, kabanos, pâtés, salami, and dense food products packaged in sleeves (e.g., processed cheese, lard, offal). The FCA 3430 model is characterized by exceptional operational precision. When synchronized with a vacuum filler (e.g., Handtmann, Vemag), the machine automatically receives the filling, forms a baton of the desired length or weight, precisely crimps two clips simultaneously (closing the end of one baton and the beginning of the next), and – if required by the process – cuts the finished product using an integrated pneumatic knife. The machine flawlessly cooperates with the clip feed system, allowing for the automatic preparation of sausages for hanging on smoking sticks.

Condition: used, Line boring machine WEBO with 4 stations type B 20 make no. 376/13; 376/14; 376/27; 376/36 year of construction approx. 1970 drilling capacity 20 mm spindle adaptor MK 2 - long spindle sleeve drilling head distance 335 mm Pgjdpfxsihmwtj Aqvel throat 260 mm pinol stroke 190 mm table size 350 x 1500 mm distance drilling spindle/table min.30 mm / max. 700 mm Spindle speed drill head 376/13 355, 500, 710, 1000, 1400, 2000, 2800, 4000 rpm. Spindle speed drill head 376/14 355, 500, 710, 1000, 1400, 2000, 2800, 4000 rpm. Spindle speed drill head 376/27 250, 355, 500, 710, 1000, 1400, 2000, 2800 rpm. Spindle speed drill head 376/36 180, 250, 355, 500, 710, 1000, 1400, 2000 rpm. Motor power 1,1 / 1,3 kW Mains connection 380 Volt, 50 Hz - Spindle speed via 2 motor speeds and 4 V-belt steps - drill head height adjustment via toothed rack and hand crank approx. 300 mm - height adjustable drilling table approx. 350 mm space requirement L x W x H 1750 x 1100 x 1900 mm weight 1900 kg good condition

Condition: used, Internal threading machine HAGEN & GOEBEL type HG 10 Tapping machine, Vertical tapping machine Machine. No. 4462 Year of construction approx. 1980 Cutting capacity in steel M3 to M10 Cutting capacity in cast iron M3 to M16 Cutting capacity in brass M3 to M18 mm Pgsdeupbf Dopfx Aqvel throat depth 250 mm Pinol stroke 80 mm Table size 340 x 240 mm Spindle speed 200-1000 rpm 6 steps Motor power 0.55 and 0.75 kW Mains connection 380 Volt, 50 Hz - 6 speed levels through 2 motor speeds and 3 belt levels - Thread pitch via guide cartridge - 2 guide cartridges with 1.0 mm and 1.25 mm thread pitch - Spindle holder with cone Ø 14.8 to 16 mm and 4 mm keyway - Table height adjustment with toothed rack via hand crank on the round column - Quick-change tapping chuck size 1, Ø 19 mm Space requirement L x W x H 850 x 550 x 1800 mm Weight 255 kg Good condition

Condition: used, Orbital Riveting Machine Double Riveting Automatic with Rotary Indexing Table DUNKES Type DN 4 Rotary table with SIEMENS control system Pjdedzp T Nopfx Aqvogl Machine no. P 81 - 5458 Year of manufacture: 1982 / 2009 Rivet shank diameter max. 12 mm Tool shank diameter 16 mm Throat depth 190 mm Rivet head stroke per riveting unit approx. 60 mm Riveting spindle speed approx. 1,400 rpm Tool-to-anvil installation height max. 80 mm Compressed air requirement 6 bar Motor power per riveting unit 1.1 kW Power supply 380 Volt, 50 Hz - Rotary indexing table with servo drive, indexing step size programmable via Siemens PLC control - Double riveting unit is adjustable within the machine frame relative to the indexing table - Table diameter Ø 295 mm for accommodating round workpieces - Pneumatic riveting stroke motion - Riveting unit adjustment via gear motor with leadscrew, positioning via adjustable micro switch - Modernization of the control system and retrofit with servo drive for the rotary table in 2009 - New electrical control cabinet with Siemens Simatic panel – built in 2009 - Riveting time infinitely programmable - Riveting pressure infinitely adjustable via pressure gauge - Micrometer stop for stroke limitation of the opposing riveting units 0–60 mm Space required L x W x H 3200 x 1250 x 2400 mm Weight approx. 2,500 kg Good condition The machine was used for riveting segment saw blades from Ø 400 to Ø 2000 mm. The segments were manually placed onto the carrier disc and fixed with straight rivet pins. The opposing riveting unit simultaneously rivets the pin from both sides. The controlled table automatically rotates to the next working position after each cycle. Ideal for saw blade manufacturers and repair shops. Alternatively suitable as a basis for constructing a special-purpose machine.

Condition: used, Year of construction: 2001, functionality: fully functional, bar diameter (max.): 32 mm, INDEX MS32P CNC Multi-Spindle Mfd. 2001 SN: 150127 Bar Feed: IEMCA SIR-MS32/33/P (3 Meters) Control: Siemens 840D Integrated Knoll Chip Conveyor External Knoll High-Pressure Filtration Unit 6 Spindles 32mm Capacity 1 Synchron High-Performance 6+1 Configuration Back-Working Capability: Equipped with a Swiveling Synchronous Spindle for simultaneous rear-end machining. Pgedpfx Aoy Ruu Deqvel Complete Part Processing: Characterized by the ability to perform drilling, tapping, and milling on the cutoff face while the next part is being machined in the main spindles, enabling dropped-complete part production. The "P" Quill Advantage: The "P" model uses hydrostatic quills (Z-axis).

Condition: used, Column-guided bandsaw semi-automatic METORA - KALTENBACH Type HMB 380 DS Only for 90° cuts (Made in Austria) Machine No. 4580028 Year of manufacture: approx. 1993 Cutting capacity round: Ø 380 mm Square: 380 x 380 mm Saw blade dimensions: 5650 x 34 x 1.1 mm Saw band speed: 25–108 m/min, continuously variable Material infeed height: 870 mm Hydraulic drive power: 1.5 kW Saw motor power: 4 kW Power supply: 400 Volt, 50 Hz Pjdpfx Aodzqtgsqvogl - Fully hydraulic bandsaw in double-column design - Hydraulic saw bow descent with stepless adjustable cutting pressure - Stepless adjustable descent speed - Hydraulic vice clamping with hydraulic bundle clamping from above - Hydraulic unit integrated in machine base - Material feed roller on infeed side with geared motor (not mounted on machine frame) - Coolant system with coolant pump for water emulsion - Minimum-quantity lubrication system for the saw blade - Electric heating cartridge for cooling water and hydraulics - Length stop TRENNJAGER Type EX-Stop1, with handwheel adjustment, digital display, and hydraulic stop carriage clamping Stop length: 6750 mm, stop travel: 5650 mm, stop arm hydraulically foldable without roller conveyor Machine footprint (L x W x H): 2800 x 1400 x 2450 mm Machine weight: approx. 3 tons Weight of stop system: approx. 800 kg In good condition

Condition: used, Semi-automatic tube bending machine, mandrel tube bender MOBITEC type BAH 1-2 KOTTMANN und BERGER GmbH Serial No. Year of construction for simultaneous bending of two steel tube sections up to Ø 12 mm Bending angle max. 90° Tube diameter max. 12 mm Mandrel length approx. 65 mm Rated power 3.5 kW Pedpjpu R Nvefx Aqvjgl Compressed air max. 6 bar / approx. 1 litre per bending cycle Power supply 400 Volt, 50 Hz - Pneumatic clamping - Pneumatic mandrel retraction - Angle input control via STÖBER Controlbox Series 4000/5000 - SIEMENS S7-200 control with TD200 display - Machine without bending tools and without tool storage pins 25 x 183 mm - Only 1 bending mandrel available (see pictures). Required space (L x W x H) 1000 x 1000 x 1500 mm Weight 390 kg Good condition

Condition: used, machine/vehicle number: 008582, Max. panel width: 4300 mm Max. panel length: 5600 mm Main saw blade projection: 105 mm No of Grippers: 9 Pgodpfx Aqoy Stviovol Panel Rotation Station: yes

Condition: used, Year of construction: 1989, functionality: fully functional, machine/vehicle number: 119, spindle motor power: 5 W, turning length: 160 mm, spindle speed (max.): 6,000 rpm, spindle speed (min.): 99 rpm, turning diameter: 16 mm, overall weight: 2,300 kg, type of input current: three-phase, bar passage: 16 mm, total width: 1,340 mm, total length: 1,850 mm, total height: 1,685 mm, input voltage: 380 V, number of driven tool stations in tool turret 1: 6, number of driven tool stations in tool turret 2: 6, Equipment: documentation/manual, rotational speed infinitely variable, I am offering my lathe for sale, complete with the accessories shown in the pictures. It includes a bar feeder and a chip conveyor. The machine is controlled by a Yasnac CNC system. Pgedey Udcfspfx Aqvjl The machine has two turrets, allowing for multi-axis and multi-group control.

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, pressing force: 48 t, bale length: 1,200 mm, bale width: 1,100 mm, bale height: 750 mm, bale weight: 450 kg, Equipment: documentation/manual, HSM VK 4812 P Year of production: 2017 Fully automatic baler. The device has service and maintenance work by an authorized HSM service with a branch in Germany. Pgodpfx Aqey Udzhjvsl Press after significant service work - details after direct contact. The baler comes complete with a ramp for ejection of finished bales and stands for binding wires. Pressing force: 480 kN Drive power: 18 kW Voltage / frequency: 400 V / 50 Hz Capacity at 50 kg/m³: 10.2 t/h Bale width x height x length: 1100 x 750 x 600 - 1200 mm Total length x width x height: 6661 x 3994 x 2583 Machine weight: 10.2 t Compressed material: foil, mixed paper, cardboard, die-cutter waste Bale tying: 4-fold with wire We also have other presses in stock. Transport costs depend on weight, volume and, above all, distance, the following information is important for inquiries: Delivery address (postal code and city name), but further details require telephone contact, so please inquire about transport costs and other delivery methods to contact us contact us by phone. Our contact details can be found in the seller's legal information. We sell and export worldwide, and thanks to our very large storage capacity we can also deliver larger quantities flexibly and quickly. We issue intra-Community invoices - without VAT. opening hours Mon-Fri: 8:00-16:00 Sat: closed

Condition: like new (used), Year of construction: 2019, operating hours: 1,750 h, functionality: fully functional, MEP Tiger 372 CNC LR 4.0 automatic metal circular saw (2019) Manufacturer: Mep Model: Tiger 372 CNC LR 4.0 automatic metal circular saw Year of manufacture: 2019 Condition: used, very good, inspected and cleaned Pgjdpfoy S Ezwex Aqvel Operating hours: 1750h Cutting range ROUND 0° 120 mm Cutting range ROUND 45° left 115 mm Cutting range ROUND 60° left 115 mm Cutting range ROUND 45° right 115 mm Cutting range SQUARE 0° 110 mm Cutting range SQUARE 45° left 100 mm Cutting range SQUARE 60° left 90 mm Cutting range SQUARE 45° right 100 mm Cutting range FLAT 0° 180 x 100 mm Cutting range FLAT 45° left 120 x 100 mm Cutting range FLAT 60° left 90 x 90 mm Cutting range FLAT 45° right 120 x 100 mm Continuously variable speed 15 to 150 rpm Motor 5.5 kW Saw blade 370 x 32 mm Coolant system Length 2500 mm Width 1840 mm Height 1890 mm Weight 1060 kg Scope of delivery: – Documentation – 2 m feed roller conveyor – Machine lighting – Chip conveyor – Coolant system

Condition: like new (used), Year of construction: 2018, operating hours: 2,150 h, functionality: fully functional, MEP TIGER 372 CNC LR 4.0 metal circular saw + CB4001 magazine High-performance automatic CNC metal circular saw with microprocessor control for cuts from 45°right to 60°left. Manufacturer: MEP Type: TIGER 372 CNC LR 4.0 Year of manufacture: 2018 Condition: very good, little used Switch-on hours: 2128h Cutting time: 1738h Machine with microprocessor control and two CNC-controlled axes, which allow up to 300 cutting programs, each with its own number of pieces and length, with the same material or material on the CB4001 loading magazine. Cutting range ROUND 0° 120 mm Cutting range ROUND 45° left 115 mm Cutting range ROUND 60° left 115 mm Cutting range ROUND 45° right 115 mm Cutting range SQUARE 0° 110 mm Cutting range FOUR-EDGE 45° left 100 mm Cutting range FOUR-EDGE 60° left 90 mm Cutting area FOUR-SQUARE 45° right 100 mm Cutting area FLAT 0° 180 x 100 mm Cutting area FLAT 45° left 120 x 100 mm Cutting area FLAT 60° left 90 x 90 mm Cutting range FLAT 45° right 120 x 100 mm Pedpfx Aoy S Ezqjqvsgl Infinitely variable speed 15 to 150 rpm Motor 5.5 kW Saw blade 370 x 32 mm Coolant system Length 2500 mm width 1840 mm height 1890 mm Weight:1060 kg Scope of delivery: - Original documentation - 4x saw blades

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, Behringer Eisele VMS 400 A metal circular saw for processing almost all steel qualities. Integrated coolant unit and micro-spraying system, selectable in the control system as required Hydraulic saw feed and quick clamping vice with clamping pressure reduction NC control with graphic display and keypad 3 selectable operating modes (manual mode, series and single cuts) Convenient stroke adjustment of the saw unit via clamping lever Can be combined with infeed and outfeed roller conveyors Manufacturer: Behringer Eisele Type: VMS 400 A metal circular saw Year: 2013 Condition: used, very good Flat 90 ° [mm] 200 x 120 Flat 45 ° [mm] 140 x 120 Flat 30 ° [mm] 100 x 100 Square 90 ° [mm] 120 Square 45 ° [mm] 120 Square 30 ° [mm] 100 Round 90 ° [mm] 140 Round 45 ° [mm] 140 Round 30 ° [mm] 110 Feed length 800 mm Drive power 2.0 / 2.6 kW Psdey S Eygspfx Aqvsgl Speeds 8 / 16 / 32 / 64 min-1 Saw blade diameter 400 mm Saw blade feed hydraulic Material feed ball screw Hydraulic clamping device Minimum quantity lubrication Chip clearing brush Length 3,100 mm Width 1,500 mm Height 2,000 mm Weight 1,350 kg Material support height 920 mm Scope of delivery: Documentation 4x saw blades 1x feed roller conveyor 2m

Condition: new, Year of construction: 2026, functionality: fully functional, ATTENTION!!! SPECIAL OFFER!!! LAST ONE LEFT!! Features: Semi-automatic operation Hydraulic control of arm movement (up – down), with smooth adjustment of descent speed Pgsdpfx Ajy Tipneqvol Arm position memory function Hydraulically controlled vice jaws Hydraulic cutting clamp included Hydraulic band tensioning Band cleaning brush Cooling system Bimetal band saw CE Declaration of Conformity Technical data: Type: Semi-automatic column type Control: control panel at the front of the machine Maximum cutting diameter: 350 mm, 400 x 350 mm Arm lifting: Hydraulic Arm lowering: Hydraulic Bandsaw speed: 25/60/75 m/min Vise: Hydraulic Min. cutting diameter 5 mm Min. material length in the vise 30 mm Distance from the base of the vise to the floor 780 mm Cutting band dimensions 4515 × 34 × 1.1 mm Total power 5.2 kW Belt speed 25/60/75 m/min Dimensions (L×W×H) 2400 × 1250 × 1550 mm Weight 1200 kg Manufacturer: Cormak

Condition: good (used), Year of construction: 1983, functionality: fully functional, KAISER V 200 automatic press line, 200 t, with DIMECO feeder line. We offer for sale a KAISER V 200 automatic press line, year of manufacture 1983, with a nominal pressing force of 200 t. The machine is designed for pressing, punching, and forming sheet metal parts from coil material. The line is equipped with DIMECO peripheral devices for automated strip processing – decoiling, straightening, and feeding material into the press. Included is a separate control panel for the feeder line. This equipment is ideal for serial production of metal parts in an automatic working cycle. The machine is installed as a complete press line and is in operational condition. Pedpfx Aqjy Ufb Asvjgl