Used Automatic Screwdriver for sale (22,324)

Condition: good (used), Bacciottini Pit Stop DG LINE 8000 Automatic Creasing Machine Fully operational and ready to use. This is the most efficient creasing and perforating system on the market, featuring a robust design. Made in Italy. Non-stop vacuum feeding with the ability to add material during operation. Built-in compressor. The set includes creasing and perforating tools. Technical data: Maximum sheet size: 500 x 700 mm Ncodpfx Alozdar Hshou Min. sheet size: 80 x 100 mm Maximum speed (for A4 format): 8000 sheets/h Material weight: 80-400 GSM Maximum number of creases per sheet: 20 Gap distance: 0.1 mm Setting accuracy: 0.1 mm Power supply: 230 V Power consumption: 2 kW Weight: 180 kg Dimensions: 1500 x 750 x 1200 mm

Condition: used, machine/vehicle number: 008582, Max. panel width: 4300 mm Max. panel length: 5600 mm Main saw blade projection: 105 mm No of Grippers: 9 Ncjdpfx Aloy Stviehju Panel Rotation Station: yes

Condition: used, Tornos CNC-controlled multi-spindle turning center Type/Model: Torno Multi Deco 20.8 Condition: Used, very well maintained Machine hours: approx. 65,724 h Technical data: Bar diameter: 5-20 mm Max. part length (without secondary operation): 100 mm Max. part length (with secondary operation): 80 mm Spindle rotational speed: up to 5,000 rpm Nodpszgw Aasfx Alhscu Max. spindle power: 15 kW Max. drilling/internal threading power: 3.7 kW Number of numerical axes: 22 Facing slide (axial): 2 Cross slide (radial + axial): 5 Longitudinal slide: 7 Parting slide: 1 Counter spindle motor power: 1.1 kW Dimensions (L x W x H): approx. 5,880 x 1,400 x 1,950 mm Weight: approx. 7,200 kg

Condition: used, Year of construction: 1981, Tornos 8-spindle bar feeder, mechanically controlled Type/Model: Tornos B20 Condition: Used Year of manufacture: 1981 Technical data Max. bar diameter: round 20 mm Max. bar diameter: square 15 mm Max. bar diameter: hexagon 19 mm Max. machining length (bar feed): 60 mm Ncedpfxozgwv Ts Alhou Number of spindles: 8 multi-spindle Spindle speed: 20 steps from 620 to max. 6,035 rpm Number of cross slides: 8 (one per spindle) Production rate: Max. up to 50 parts per minute Dimensions (L x W x H): approx. 2465 mm x 1200 mm x 1700 mm Weight: approx. 5,900 kg Equipment / Accessories: Retrofitted with 2 CNC slides at positions 3 and 6 Complete control cabinet modernization Modification of the cam shaft with continuously adjustable servo drive Main spindle with spindle brake

Condition: used, Year of construction: 2008, Motor spindle turning machine: Tornos Type/Model: MultiAlpha 8x20 Condition: used Year of manufacture: 2008 Machine hours: 45017 h Technical data Capacities & travels Bar diameter (round material): up to max. 22 mm (with turned bars up to max. 25 mm) Workpiece length: max. 100 mm Longitudinal travel (Z-axis): 80 mm Cross slide travel (X-axis): 50 mm End units (longitudinal slide): 200 mm Spindle & axes Main spindle: 8 independently driven motor spindles Counter spindles: one counter spindle, with max. 5 machining tools and max. 3 driven machining operations possible Total axes: 34 axes Tool slide: 7 cross slides X/Y (position 1 - 7); 1 facing slide X (position 8); 7 longitudinal slides (position 1-7) Drive power & speeds Ncodpozgwp Hofx Alhsu Speed of main spindles: 0 - 8,000 rpm Power of main spindle motor: 11.2 kW Torque of main spindle: 17 Nm (optional up to 25 Nm) Speed of counter spindle: max. 8,000 rpm Power of counter spindle motor: 3.7 kW Torque of counter spindle: 8.3 Nm Equipment / accessories: Fanuc 30i control system 4x Motoquill 8x Fixed drilling spindle with Modular 40 mount Base holder Göltenbodt (fixed to axes) Knoll system with turbo filter system Manipulator for part handling max. bar diameter Ø 20 mm max. part length 100 mm 1 x Y-axis installable

Condition: good (used), Year of construction: 2003, saw band length 2910 x 27 x 0,90 mm Control Kasto CompactControll capacity 90 degrees: round 260 mm Ncsdpfxszgxf Nj Alheu capacity 90 degrees: flat 300 x 260 mm capacity 90 degrees: square 260 x 260 mm capacity 45 degrees: round 200 mm capacity 60 degrees: round 165 mm cutting speed 20-110 m/min min. dia. 10 mm Cutting Length min. 6 mm total power requirement 2,5 kW weight of the machine ca. 0,86 t dimensions of the machine ca. 1,8 x 1,8 x 1,7 m Fully automatic band saw (CNC) Includes right-hand roller conveyor with programmable stop carriage & digital display: Stop positioning is handled by the integrated measuring system, with the position shown to millimeter precision on the separate display. Dimensions (L x W x H): 2.70 x 1.10 x 1.70 m. Max. measuring length: 2.30 m. Includes hydraulic clamping and feed unit Includes coolant system Includes work light Includes small parts and spare parts Includes 2 band saw blades Includes operating manuals

Condition: used, Year of construction: 1996, functionality: fully functional, Italian-built C-frame eccentric press by S. Giacomo srl, Vittorio Veneto. CE certified. Year of manufacture: 1996, serial no. 6759. Rated at 130 metric tons (1,300 kN nominal force) with adjustable stroke 14–200 mm and max 55 strokes/min. Supplied complete with a Festo BV-200-250-C pneumatic feed unit — a heavy-duty pneumatic clamp feeder with 200 mm width and 250 mm max feed length, operating on filtered compressed air at 3–6 bar. Suitable for strip/coil feeding in progressive die and blanking operations. Technical Specifications Model: T 130R CE Serial: 6759 Year: 1996 Nominal force: 1,300 kN (130 t) Stroke (adjustable): 14–200 mm Stroke rate: 55 spm max Installed power: 9.25 kW Main voltage: 400 V Air pressure: 5.5–6 bar Weight: 10,000 kg CE certified: Yes Feeder – Festo BV-200-250-C: Type: Pneumatic clamp feed unit Max feed length: 250 mm Max width: 200 mm Operating pressure: 3–6 bar Njdpfx Aljzg U R Iohscu

Year of construction: 2005, condition: used, machine/vehicle number: 15-230068, With digital display Njdpfxey Sqkqe Alhocu

Condition: good (used), Year of construction: 2004, functionality: fully functional, NATGRAPH UV DRYER Automatic Stacker: NATGRAPH Raised Ncsdpfx Alsy Twkmehsu

Condition: used, Year of construction: 2020, machine/vehicle number: 0-250-73-1509, vertical machining center, workpiece length: max. 3,050 mm, workpiece width: max. 850 mm, workpiece thickness: max. 56 mm, workpiece support area, workpiece removal area, V13 high-speed drilling unit with individually controllable vertical drilling spindles, horizontal drilling unit with 4 spindles in the X-direction, horizontal drilling unit with 2 spindles in the Y-direction, nut saw in the X-direction, tool change spindle HSK 63 with 10 kW converter, 4-position pick-up changer on the side, stop cylinder for workpiece positioning, workpiece clamping system with 1 workpiece clamping chuck in the X-direction, adjustable via ball screw, Powercontrol PC86 Powertouch control system, plausibility check for vertical machining centers. Njdpfxjzha Dvj Alhscu

Year of construction: 2018, condition: good (used), Fully automatic angle welding machine / Fully automatic side welding machine Manufacturer: Diez Type: AWS-C 9070 CS Year of manufacture: 2018 Shrink tunnel Manufacturer: Diez Type: HTC 122-40D Year of manufacture: 2018 Ncsdpfx Aotzcd Solheu Operating side: Left, in the direction of travel Passage width: approx. 600 mm Passage height: approx. 190 mm Welding length: approx. 900 mm Working height / belt height infeed/outfeed: approx. 860 mm + 100 Performance: Up to 30 cycles / min (depending on package size and feed speed) Connection voltage: 230V AC, 50Hz, 1 phase + N + PE Power consumption: 3.5 kW Rated current: 10 A With cable and 16A Schuko plug Compressed air connection: 6 bar External dimensions: Length: 2600 mm Width: 2000 mm Height: 1500 mm 24626

Condition: used, Year of construction: 2021, Used machine Year of manufacture: 2021 Cutting length: 5300 mm Cutting height: 2200 mm Vertical panel saw for cutting sheet-type wood materials such as chipboard, MDF panels, veneer panels, multiplex, etc. Base machine Completely welded frame with extremely high rigidity Precise guidance of the saw beam / saw unit for accurate cutting. Automatic feed for vertical and horizontal cuts. Cutting depth: max. 60 mm Saw beam Sturdy saw beam guided on precision rails. Pneumatic latching of the saw beam in the upper and lower positions. Electric monitoring during vertical cuts Saw unit Smooth and ergonomic operation for plunging and retracting the saw unit. Plunge lever can be folded down from the upper position for precise entry. Generously dimensioned levers for easy swiveling. Housing cover opens the complete saw unit for easy tool changes, including ProLock quick-release chuck. View opening: riving knife can be retracted Automatic functions Automatic plunge, cut-through, retract, and stop or Automatic plunge, cut-through, retract, and return Shortened return travel (selector switch) The shortened return travel of the saw beam prevents unnecessary travel paths of the saw unit (short workpiece positioned on the right) Speed control: infinitely variable from 6 - 24 m/min Cutting depth: max. 60 mm Control panel Efficient operation of the machine. Ergonomically mounted at eye level. Lower workpiece support Stable, wear-free stainless steel support. Support up to the cutting line: narrow workpieces cannot tip or fall through. Extraction Effective extraction with two ports: saw unit Ø 120 mm, frame end Ø 100 mm (for TRK version) Lifting roller transport system: Manually raiseable and lowerable rollers for easy and gentle panel transport. Measuring tape For dimension display in horizontal cutting with three manual measurement displays: Absolute measurement from the lower workpiece support Absolute measurement from the middle workpiece support Series cuts from the top edge of the panel Powerpackage The package consists of the following options: 1. TRK extraction system 2. SuperCut scorer 3. Vertical digital display 4. Stepless speed regulation Saw unit 7.0 kW, 1100–5500 rpm, 400 V, 50 Hz Incl. HW circular saw blade Ø 250 x 30 x 3.2 mm, Z 48, hollow-flat tooth TRK system according to CE guidelines SH 2200 (less than 2 mg fine dust/m³ of air) – mandatory for all CE-required countries (extraction system provided by customer) Pneumatic shifting grid Continuous shifting grid over the entire machine length for stable workpiece support. Automatically, pneumatically retracts during horizontal cuts. Prevents the shifting grid from being cut during horizontal cuts. Digital measurement display for horizontal cutting on the control panel Incl. electric fine adjustment Display of: Absolute measurement from the lower workpiece support OFF-Set measurement from the middle workpiece support Series cuts from the top edge of the panel Saw blade compensation (saw blade thickness can be individually programmed) Nodpfx Aleyuld Ajhocu If the unit is operated via the brake at the ba... (text cut off)

Condition: used, Year of construction: 2019, Used machine Nodpfx Alswka Upshecu Year of manufacture: 2019 Equipment and Technical Data: - For classic nesting processing with wear plate - Machine frame of welded construction with ground and hardened prism guides for the gantry, unit head, and consoles - Gantry-type traveling column - Helical rack and pinion drive in X and Y axes, ball screw in Z axis for precise positioning - Working dimensions: - Max. support area on nesting table: X = 3100 mm, Y = 1560 mm - Max. traverse paths: X = 4695 mm, Y = 2100 mm, Z = 293 mm - Max. clearance height over DYNESTIC table: Z = 100 mm from table top (without wear plate) - Maximum programmable speed Vector speed: 128 m/min X = 80 m/min, Y = 100 m/min, Z = 25 m/min - DYNESTIC table: - Fixed, continuous processing table with grid layout - Continuous grooves in X and Y directions - Groove spacing: 50 mm - Includes 25 meters of sealing cord for clamping the wear plate - Vacuum fields: Single-circuit vacuum system - Drilling unit 7877: - 19 spindles - Drive power: 1.7 kW - 13 vertical spindles: - Individually selectable - Arranged in U-shape - 5+4 in X direction, 4 in Y direction - 32 mm spacing - Max. drill diameter: 35 mm - Total drill length: 70 mm from screw-on end (depending on panel thickness) - Spindle stroke: 70 mm - Rotational direction: alternating clockwise/counterclockwise - Speed (max): 1000 - 4400 rpm, infinitely variable - Tool holder: M10 thread, 11 mm fit - Without tool, without holder - 6 horizontal spindles: - 2 double drill spindles in X direction - 1 double drill spindle in Y direction - Tool holder: M10 thread, 11 mm fit - Max. total drill length: 63 mm from screw-on end - Without tool, without holder - Milling unit 7842: - Power: 12.0 kW (S6) - Max. speed = 1000 - 24,000 rpm, infinitely variable - Max. power at 12,000 to 24,000 rpm - Air-cooled - With HSK-F 63 tool holder - With right-hand threaded nut (for right-hand rotating tools) - With collet chuck for HSK shank - Ceramic ball bearings (hybrid bearings) - Tool weight max. 6 kg (incl. holder) - Tools: milling and grinding tools max. Ø 160 mm - Safety enclosure according to CE standard - Side and rear safety fence - Vacuum pump: 500 m³/h, dry-running - Personnel safety ensured by light barriers in the front machine area - Hand-held control device for remote operation of the machine with the following functions: - Start/stop of the processing program - Control of processing cycle speed - Reset button - Manual feed/rapid traverse for all axes - EMERGENCY STOP - CAMPUS V7 CAD/CAM software 1x machine license consisting of: - CAMPUS NC-HOPS: - Graphic variant system with WOP and CAD/CAM features for creating part variants using macro technology - CAMPUS MT-Manager - CAMPUS Workcenter - CAMPUS DXF interface - Automatic central lubrication - Automatic lubrication at defined intervals - Additional sealing against dust via pressurization in each guide carriage

Condition: good (used), Year of construction: 2015, Main and counter spindle Nsdpjyx Tk Tsfx Alhocu 3 turrets Backside machining Fire extinguishing system Kraft & Bauer High-pressure system Büchele Bar feeder FMB Turbo 2-20

Condition: used, Year of construction: 2001, functionality: fully functional, machine/vehicle number: 919, power of the servo motor: 750 W, input voltage: 400 V, type of input current: three-phase, feed length X-axis: 150 mm, feed length Y-axis: 100 mm, 8 C – JAM TC 138-EP-FC Automatic Pocket Setter with Brother Sewing Head (2001) CNC Controlled Automatic Pocket Setting Workstation for Jeans & Workwear Production Professional-grade JAM TC 138-EP-FC Automatic Pocket Setter equipped with a high-performance Brother automated sewing system. Manufactured by JAM s.r.l. (Italy), this fully integrated workstation is designed for automated folding and stitching of patch pockets used in jeans, workwear, jackets, and other garment applications requiring high productivity and repeatable quality. The machine combines programmable CNC-controlled sewing, automated pneumatic material handling, precision folding templates, and automatic positioning technology. The system is capable of folding and sewing pocket components with minimal operator intervention while maintaining consistent quality throughout long production runs. The unit was previously used in professional garment manufacturing and remained operational until factory shutdown. Technical Specifications • Manufacturer: JAM s.r.l. • Model: TC 138-EP-FC • Year of Manufacture: 2001 • Machine Number (Matricola): 919 • Reference Number: 8 C • Sewing Head: Brother Automated Sewing Unit • Control System: Brother BAS CNC Controller • Automation Platform: JAM System • Servo Motor Power: 750 W • Power Supply: 400 V, 3-Phase • Frequency: 50/60 Hz • Motor Speed: o 1390 rpm (50 Hz) o 1680 rpm (60 Hz) • X-Axis Feed Length: 150 mm • Y-Axis Feed Length: 100 mm • Pneumatic Supply Required Key Features • Fully automated pocket setting workstation • CNC-controlled programmable sewing system • Automated pocket folding and positioning • Pneumatic clamping and material handling • Fast pattern change capability • High repeatability and consistent stitch quality • Designed for continuous industrial production • Heavy-duty Italian automation platform • Integrated Brother sewing technology • Suitable for denim, workwear, and garment manufacturing Includes • JAM TC 138-EP-FC automated pocket setter • Brother automated sewing head • Brother BAS CNC control system • Dual control panel interface • Integrated pneumatic clamping system • Automated fabric handling system • Pocket folding templates and guides • Stainless steel workstation table • Industrial steel frame • Safety guards • Integrated workstation lighting • Pneumatic components and connections Applications • Automatic patch pocket attachment • Jeans pocket setting • Workwear pocket production • Chino and trouser pocket attachment • Garment component sewing • Reinforcement stitching • Label attachment operations • High-volume apparel manufacturing Condition • Fully functional Ncedpozgw Ebofx Alhou • Operational prior to factory shutdown • Serviced on 27.02.2026 • Good industrial condition • Normal cosmetic wear consistent with production use • Available for inspection before dismantling Location Valga, Estonia Dismantling & Transport Buyer responsible for dismantling, loading, transportation, and all related costs. Professional dismantling is recommended due to the machine's CNC control system, pneumatic components, and calibration requirements. Sales Terms Sold as-is, where-is, without warranty. Part of the MASI Jeans factory liquidation.

Condition: like new (used), Year of construction: 2023, functionality: fully functional, machine/vehicle number: G90230201, saw blade diameter: 350 mm, total length: 1,500 mm, total width: 970 mm, total height: 1,400 mm, cutting height (max.): 100 mm, overall weight: 350 kg, saw blade speed: 3,000 rpm, input voltage: 400 V, Automatic CNC controlled circular saw for cutting and drilling / tapping aluminium. Tronzadoras MG - GAA-350-90+CNC+TR12 • Automatic cycle. • 700 mm ballscrew feeder. Ncodpfxevl Eahj Alheu • OMRON controller. • 10 programs with 30 lines. • 20 parts in memory. • Emergency stop. • Adjustable feeding and cutting speeds. • Automatic adjusted cutting length with multiple advances. • Cut to 90º. • Automatic air-oil cooling. • Semi-automatic or fully automatic operation. The machine is inspected, serviced and ready for work.

Condition: used, Year of construction: 2005, Technical details: spindle passage: 36 mm Article: CNC-controlled multi-spindle automatic lathe Manufacturer: Schütte Type: A36PC Yob: 2005 Loading magazine by Pietro Cucchi Knoll unit 7 radial cross-type carriages 2 additional speed motors in 4th and 5th positions 2 additional speed motors for front spindles in position D (pick-up) and B (for front motorized spindle) 1 polygon cutter 1 motorized front spindle 1 radial motorized in position IV for cross-type carriage 1 radial motorized in position V to be mounted on X-type carriage only (no cross-type carriage) 1 straight head for motorized position IV 1 90-degree tilted head for motorized position IV 1 tilt-adjustable head for motorized position IV Please, contact us for getting more information and pictures on mail(at) or Nedpfszg Aw Nox Alhocu *

Condition: used, machine/vehicle number: 008602, Max. panel width: 4300 mm Ncedpfozcmp Asx Alhsu Max. panel length: 2200 mm Main saw blade projection: 110 mm No of Grippers: 7

Condition: used, machine/vehicle number: 008606, Max. panel width: 3000 mm Max. panel length: 1000 mm Nodpfx Aozcmpcolhocu No of Bottom Units: 5 No of Top Units: 2 Positioning of Units by NC: yes Lateral horizontal groups: yes

Condition: used, machine/vehicle number: 008607, Max. panel width: 3000 mm Max. panel length: 1000 mm No of Bottom Units: 6 Ncjdpfx Alozcmn Eohsu No of Top Units: 4 Positioning of Units by NC: yes Lateral horizontal groups: yes

Condition: good (used), Year of construction: 2007, CNC Long Turning Lathe Manufacturer: Traub Machine Model: TNL 12 Control System: Traub Year of Manufacture: 2007 TECHNICAL DATA Headstock - Max. bar diameter (mm) 12.7 - Quality of round material (DIN 671) (mm) Ø Xh9 - Max. speed (rpm) 12,000 Max. turning length / headstock travel - with fixed guide bushing (mm) 130 - with rotating guide bushing (mm) 80 - with programmable guide bushing (mm) 80 C-axis resolution (degrees) 0.001 Rapid traverse Z1 (m/min) 30 Tool turret 1 - Slide travel X1 (mm) 35 - Slide travel Y1 (mm) 38 (-10 +28) - Rapid traverse X1 / Y1 (m/min) 15 - Chip-to-chip time (s) 0.3 Tool turret 2 - Slide travel X2 (mm) 35 - Slide travel Z2 (mm) 50 - Rapid traverse X2/Z2 (m/min) 15 - Chip-to-chip time (s) 0.3 Tool drive for tool turret 1 and 2 - Max. speed (rpm) 8,000 - Tools max. (number) 2xG - Clamping diameter for drilling tools (mm) 0.5-7 Counter spindle / front tool holder - Max. bar diameter (mm) 12.7 - Max. longitudinal travel 23, 24 / Xg (mm) 140 / 228 - Rapid traverse 23, 24 / X3 (m/min) 30 - Tool holders (number) 4 - Max. speed (rpm) 12,000 - C-axis resolution (GSP) (degrees) 0.001 Rear tool holder, driven / fixed - Z-axis travel with work spindle (mm) 80 - Tool holder diameter (mm) 20 - Tool holders (number) 3 Rear tool holder (X4 axis) - X4-axis travel (mm) 39 - Rapid traverse speed (m/min) 15 - Tool holder diameter (mm) 28 - Tool holders (number) 4 Tool drive for rear tool holder (with X4 axis) - Max. speed (rpm) 10,000 - Driven tools max. (number) 4 - Clamping diameter for drilling tools Nodpfezgczbox Alhecu - Driven (mm) 0.5 - 7 - Non-driven (mm) 0.5 - 10 Coolant system - Pump pressure, single-stage (bar) 3 - Tank capacity (l) 180 - Delivery rate (l/min) 40 EQUIPMENT FEATURES - Chip conveyor - Bar loader FMB Minimag 18 - High-pressure system - Fire extinguishing system Subject to change and errors in technical data and specifications.

Condition: good (used), Year of construction: 2002, Control: FANUC 18i-T Turning diameter: 32 mm Turning length: 120 mm Max. main spindle speed: 8,000 rpm Max. counter spindle speed: 8,000 rpm SLIDE 1 X-axis travel 1: 65 mm Y-axis travel 1: 350 mm Tool positions 6 / 4 Fixed stations 6 Driven stations 4 SLIDE 2 X-axis travel 2: 265 mm Z-axis travel 2: 320 mm Tool positions 2 / 3 Fixed stations 2 Driven stations 3 Nedpfx Alozgdk Dshocu SLIDE Y2 Tool positions 3 / 2 / 2 External machining 3 Internal machining 2 Driven stations 2 Weight: 4,500 kg Bar loader: IEMCA BOSS

Condition: used, functionality: fully functional, “Functionally tested; item comes from the dismantling of equipment from an automotive supplier.” Available quantity: > 10 units Manufacturer: Cleco / Apex Tool Group Type: TSE 961446PT Nsdpfx Alszggx Dshscu Voltage: 380 V DC Current: 2–10 A DC Operating temperature: –20 to +70 °C Humidity: 0–90 % without condensation You can also find the corresponding screw control unit with us!

Condition: used, From the dismantling of a production facility belonging to an automotive supplier, professionally disassembled. Quantity available: > 10 units Brand: CLECO Series: MPRO400GC Voltage: 230 V AC Ncodpfozggqajx Alhou Frequency: 50/60 Hz Rated current: 2 A Power: Typically 250 VA Protection class: IP42

Condition: excellent (used), Year of construction: 2020, operating hours: 2,450 h, functionality: fully functional, cutting width (max.): 1,270 mm, cutting length (max.): 1,680 mm, type of input current: three-phase, cutting height (max.): 50 mm, Equipment: safety light barrier, ESKO Kongsberg X20 Light Sign (instalata in februarie 2020 si cu 2450 ore de functionare) - Working area 1680x1270 mm, - Incl. basic X20 starter table, felt cutting underlay, shipping crates, - FlexiHead with 3 insert positions, - 6kW vacuum pump, PC & iPC Sign Standard, camera. - Table mains 230V - Pump mains 3 x 380 V - iCut Production Console software Tools : - Basic Folding Carton Kit - Multi Purpose High Frequency(MP-HF) Knife Tool (for cutting corrugate cardboard) - Folding carton crease tool (15mm) incl crease wheels - Crease Tool (60 mm for creasing corrugate cardboard) - Psaligraphy knife tool, incl. 2x SR6150 and 2x SR6151 blades - Rigid Material Knife tool (for 8mm knife blades) - KissCutting Knife tool (incl 6x sign foil knife bl) - Incl 2 different pressure springs; - Incl 3xKC101+3xKC102 knife blades; - Removable&adjust.depth control cup; Nedpfx Aezdk Iwolhocu - Hand tool for knife blade change