Used Automatic Turret Lathe for sale (25,483)

Condition: used, Automatic lathe Golhcdoyllr Ijwweip Manufacturer: STROHM Model: M125

Condition: used, Year of construction: 1969, Automatic turret lathe brand: INDEX Gislhcdweylht Uewep type: B60 new in: 1967 equipped with: 6x turret Thread turning device Material feed

Condition: used, Year of construction: 1998, functionality: fully functional, We offer various lathes such as INDEX GS30, INDEX GSC42, cam-type automatics B and C, Mahr roundness measuring device, Mitutoyo profile projector ... Price on request. Gielhceym Avmodwwsp

Condition: good (used), Year of construction: 1975, Turret lathe HESTIKA Type:HR42 built approx. 1975 Spindle capacity max : 42 mm with turret head and tool holder Multifix Type:B Spindle speed: 88 - 2800 rpm Collet chuck device, coolant device, machine documentation. Gelhovgbqfecdwwjip Machine in good condition .

Condition: good (used), Year of construction: 1965, Turret lathe HESTIKA Type: HR32 built approx. 1965 Spindle capacity max: 32 mm with tool turret, collet chuck device, Gielhovgbphecdwwep Spindle speed :200-3200 rpm with coolant device, machine documentation . Good condition Ready for immediate use .

Condition: used, Technical details: spindle passage: 60 mm turning length: 45 mm turning diameter: max. 56 mm drill depth: max. 70 mm revolution per minute: 48 - 1500 (spindle) U/min threading: Drehzahl: 24 - 750 U/min tool turret - number of stations: 8 total power requirement: 5,5 kW weight of the machine ca.: 2,4 t space requirement of the machine approx.: L:2,1x1,0x1,8 m Gioleu Iwyijhcdwwsp Cam-controlled automatic lathe according to template. Workpiece is clamped via clamping cartridge. Turret head: disk turret Hahn&Tessky Esslingen, tool path 80mm, adjustment 36mm, distance collet/turret head min./max.: 72/188mm 2 pieces turning support, working stroke 45mm 2 piece cutting off support, working path approx. 40mm Cooling water system Machine is not connected. Sale at a low selling price. *

Condition: used, Year of construction: 1980, functionality: fully functional, machine/vehicle number: 24xx, For sale is a used but fully functional D6 with a turret; the machine was still in production up until it was shut down. The sale of the machine excludes any kind of guarantee or warranty! Sold as seen! Gelhcdwox Nphcjwoip

Condition: good (used), Ward turret lathe Chuck diameter: 200 mm Turning diameter bed: 290 mm Gslhcdwoq H Aqqowsip Support turning diameter: 170 mm Stroke: 185 mm Clearance: 32 mm Dimensions: 205x105x135 cm LxWxH

Condition: ready for operation (used), Year of construction: 2012, operating hours: 8,300 h, functionality: fully functional, spindle speed (max.): 6,400 rpm, bar diameter (max.): 32 mm, controller model: TX 8 i-p, workpiece length (max.): 245 mm, TECHNICAL DETAILS Main Spindle Max. bar capacity: 32 mm Max. workpiece length (swiss turning): 245 mm Max. workpiece length (short turning): 125 mm Max. spindle speed: 6,400 rpm Gislhsyn Imyecdwwep Sub Spindle Max. bar capacity: 32 mm Max. clamping length for workpiece: 250 mm Max. spindle speed: 6,000 rpm Upper Turret Number of stations: 10 All driven Max. speed: 12,000 rpm Lower Turret Number of stations: 9 All driven Max. speed: 12,000 rpm Backworking Unit Number of stations: 8 Driven stations: 3 (T12, T13, and T14) Speed T12 & T14: 12,000 rpm Speed T13: 4,000 rpm MACHINE DETAILS Spindle hours: 8,300 hours Control system: TX 8 i-p EQUIPMENT Parts conveyor Chip conveyor Coolant pump 20 bar IFS oil mist separator Bar feeder FMB turbo 3-36

Condition: new, Year of construction: 2025, operating hours: 1,000 h, functionality: fully functional, machine/vehicle number: SCR 44 2SF, Vertical Turning center SCR 44 – 2SF - Tech data Nominal Turning Envelope Faceplate Diameter 4.000 Machining Diameter 4.400 mm Machining Heights 2.000 mm Work Piece Weight 16,000 kg Nominal Travels X-Axis Rams Carriage 2,500 mm W-Axis Elevating Cross Rail 1,200 mm Indexing step 300 mm Z-Axis Ram vertical travel 1,250 mm Work Table WorkTable Diameter 4.000 mm WorkTable Speed 1 - 60(90) rpm Power Continuous S1 100 kW Torque Continuous S1 110,000 Nm WorkTable C axis 0.02 to 1.5 rpm Power Continuous S1 11 kW C axis Torque Continuous S1 55,000 Nm Locking Table Torque 80,000 Nm Z-Axis Milling Ram Ram Size Turning Milling 250 X 250 mm Turning / MillingTool type KM 63 - ISO 50 DIN 69871 Ram Milling Capability Ram Speed 0 to 2,500 rpm Power Continuous S1 40 kW Torque Continuous S1 1.400 Nm Toolchanger Number Of Tool Magazines 2 X ATC for 12 turning / milling tools Tool Storage 24 Axes Drives X1,2-Axes horizontal axis Power Continuous S1 5.5 kW Thrust Continuous S1 50,000 N Z-Axis Ram Power Continuous S1 5.5 kW Thrust Continuous S1 50,000 N W-Axis Cross-Rail vertical movement Power Continuous S1 11 kW Axes Rates X1,2 And Z1,2-Axes Feed Rates 0.02 to 10,000 mm/min W-Axis Elevating Rate 400 mm/min Coolant System Coolant Tank Capacity 2,000 L Coolant Pressure / Flow Rate: -internal coolant (milling) -external coolant (turning) Filtration unit: -type -filtration size 40 bar at 40 LPM 5 bar at 100 LPM Cartridge type 25 µm Horizontal Drilling Head For inside and outside drilling operations. Maximum speed 3.000 rpm Power 42 kW Toolholder tape ISO 50 DIN 69871 CNC Control -producer Sinumerik 840 Dsl Siemens Accuracy Positioning: X ±0.010 mm / m Z ±0.010 mm /m C ±3 arcsec Gislhcdwog Uwmqswsp Repeatability: X 0.020 mm Z 0.020 mm Overall dimensions Length x Width x Height 11,000 x 6,600 x 7,500 mm Weight 79.000 kg Minimum Fused Disconnect 140 KVA

Condition: new, Year of construction: 2026, turning height: 2,400 mm, rotary table diameter: 2,500 mm, table load: 30,000 kg, table diameter: 2,500 mm, warranty duration: 12 months, table speed: 112 mm/min, REM Vertical Turning Lathe TURNING DIAMETER SCR SCR 27 MANUAL Special manufactured by REM for : CENTER AND EAST EUROPE MIDDLE EAST LATIN AMERICA DEVELOPING SHOPS, HIGHLIGHTS - UNBEATABLE PRICE - VERY EFFECTIVE MACHINE - GOOD FOR WORSHOPS IN SMALL AND MIDDLE RANGE OF PRODUCTION - NO GEARBOXES Golhcdov Hngtswwsip - NO CNC CONTROLL - NO EXPENSIVE TEHNOLOGIST AND WORKER - EASY MAINTENANCE AND - EASY OPERATION - EASY LEARNING Technical Details: Faceplate Diameter (mm) 2500mm Max. Turning Diameter (mm) 2500+ up to300mm Machining Height: 2400mm Max. Work Piece Weight: 30 tons Control Conventional DIGITAL READOUT for each axis Plase note: This machine tool is made to order and can be customized to your specific needs.

Condition: like new (used), Year of construction: 2022, operating hours: 5,131 h, functionality: fully functional, Machine TORNOS GT 26 III Year of manufacture: 2022 Equipment Control: FANUC 31i-MODEL B Plus High-pressure pump HP20-140 various tool holders MAS-TOOLS Bar feeder SBF-326 Long parts device Belt chip conveyor Fa. Müller Oil mist extractor 3Nine Tool breakage sensor Connectivity Pack Machine documentation Gielhcdwoyug Ipjwop with base tray Condition rating Condition: 9 out of 10 Operating hours / current power-on hours Power-on hours / operating time: 5,131 h 48 min 18 s Spindle/part counter: 619,957 CONTROL ON: 6,989 h 43 min Machining time: 2,274 h 22 min 1 s Date on display: 2026-02-16 Time on display: 13:49:30

Condition: excellent (used), Year of construction: 2020, operating hours: 7,341 h, functionality: fully functional, CNC Swiss-type automatic lathe Make: STAR Model: SX-38 Type A Year: 2020 Equipped with: FANUC 31i Model B5 control, synchronous spindle, powered tools, Y2-axis, Y3-axis, 2x C-axis, X2-axis, X3-axis, B-axis (programmable on linear carrier), independent back machining (8 stations), turret, swarf conveyor and swarf trolley, parts conveyor belt, fire extinguishing system, oil mist extraction, JBS guide bushing unit, can be used as both long and short turning machine, high-pressure pump, bar feeder FMB TURBO 5-65 Gslhsx Sx T Tecdwwsip

Condition: excellent (used), Year of construction: 2014, operating hours: 31,000 h, functionality: fully functional, CNC-swiss type automatic lathe brand: STAR type: SV-38R new in: 2014 Gijlhcdjytq Ahjwwep equipped with: FANUC 31i control, turret with B, Y, X, and Z axis, driven tools, 2x C-axis, Y2 axis, subspindle, high pressure pump, oil mist, backworking, chip conveyor, parts conveyor, fire extinguishing system, useable for short and long parts automatic bar loader FMB TURBO 5-55

Condition: used, Year of construction: 2001, Technical details: faceplate diameter: 2000 mm swing diameter: 2130 mm turning height: 1400 mm ram stroke range: 1000 mm workpiece weight: 10 t faceplate turning speed range: 1 -200 U/min main drive: 60 kW total power requirement: 95 kW Golhsvb A Uzocdwwjip weight of the machine ca.: 24 t dimensions of the machine ca.: 6,0 x 4,0 x 5,6 m with CNC SIEMENS 840 D C-axis driven tooling 15/22 kW automatic toolchnager 16-pockets through spindle coolant splash guarding and chip conveyor *

Condition: used, Year of construction: 2005, functionality: fully functional, TECHNICAL DATA Spindle Head Max. bar stock diameter (mm): 13.0 Material quality (DIN 671) (mm): Ø Xh9 Collet chuck, selectable: Through-bore Guide bush, selectable: Through-bore Max. turning length / spindle stroke: • with fixed guide bush (mm): 130 • with rotary guide bush (mm): 80 • with programmable guide bush (mm): 80 Spindle speed (rpm): 12,000 C-axis electronic resolution (degrees): 0.001 Rapid traverse Z1 (m/min): 30 Tool Carrier 1 Slide travel X1 (mm): 35 Slide travel Y1 (mm): 38 (-10 +28) Rapid traverse X1 / Y1 (m/min): 15 Tool stations (number): 6 (12) Turning tool cross-section (mm): 8x8 or 12x12 Clamping diameter for driven drilling tools (mm): 0.5 - 7 Gielsyr N Dzohcdwwjp Chip-to-chip time (s): 0.3 Tool Carrier 2 Slide travel X2 (mm): 35 Slide travel Z2 (mm): 50 Rapid traverse X2/Z2 (m/min): 15 Tool stations (number): 6 Turning tool cross-section (mm): 8x8 or 12x12 Clamping diameter for driven drilling tools (mm): 0.5 - 7 Chip-to-chip time (s): 0.3 Tool Drive for Tool Carrier 1 and 2 Speed (rpm): 0...8000 Max. driven tools (number): 2x6 Clamping diameter for drilling tools (mm): 0.5 - 7 Sub-Spindle / Front Unit Max. bar stock diameter (mm): 13.0 Max. longitudinal stroke Z3, Z4 / X3 (mm): 140 | 228 Rapid traverse Z3, Z4 / X3 (m/min): 30 Tool stations (number): 4 Spindle speed (rpm): 12,000 C-axis electronic resolution (deg): 0.001 Rear Tool Unit, Slide/Fix Stroke Z, slidable with working spindle (mm): 80 Tool holder diameter (mm): 20 Tool stations (number): 3 Rear Tool Unit (X4-axis) Stroke X4 (mm): 39 Rapid traverse speed (m/min): 15 Tool holder diameter (mm): 28 Tool stations (number): 4 Tool Drive for Rear Tool Unit (with X4-axis) Speed (rpm): 0...10,000 Max. driven tools (number): 4 Clamping diameter for drilling tools: • driven (mm): 0.5 - 7 • stationary (mm): 0.5 - 10 Coolant System Pump pressure single stage (bar): 3 120 bar pump for front/rear unit Tank capacity (l): 180 Delivery rate (l/min): 40

Condition: used, ESCO ESCOMATIC D 6 SR is an Automatic lathe engineered for precision machining, high accuracy and reliable production. Capacity: diameter of work admitted 6 mm; with flat cames max turning length 62 mm; spindle hole 6 mm. Specifications: 3 spindle speeds from 2400 to 6000 rpm; 3 tool cutters; turret slide/revolver 1a (D6-8-Mp 103/a) with 4 tools; voltage 60Hz 220/440 V; total power 2.5 CV; machine weight approx. 1150 kg; footprint L1500 × W1000 mm. Key equipment: turret (D6-8-Mp 103/a) and cam disc. Delivers tight tolerances; suitable for automotive, watchmaking, machine tools, aerospace and medical sectors. Gioleyr Hgmjhcdwwep

Condition: used, CNC cycle controlled lathe HARRISON type Alpha 400 Plus Machine No. P30180/150 Year of construction 1998 center distance 1250 mm turning diameter over bed 400 mm center height 200 mm Swing diameter over cross slide 245 mm Swing diameter in the bend 585 mm bed width 313 mm face travel (X-axis) 250 mm Tailstock spindle diameter 73 mm Tailstock quill stroke 140 mm Tailstock quill mount MK 5 spindle bore 54 mm spindle head size Camlock D1 size 6 Spindle speed 20-2500 rpm. Spindle speed range (stage 1) 15-275 rpm. Spindle speed range (stage 2) 35-795 rpm. Spindle speed range (level 3) 110-2500 rpm. Feed rate X and Z 0.03 - 0.6 mm/rev. Rapid traverse speed X axis max. 2000 mm/min. Rapid traverse speed Z-axis max. 4000 mm/min. Threading function Metric / Inch / Diametral / Module Spindle drive power 7.5 KW Mains connection 400 Volt, 50 Hz, 23,5 kVA - cycle control Harrison Alpha / GE FANUC - language in French (France) - automatic gear range shifting in 3 steps (15-275, 35-795, 110-2500 rpm.) - electronic handwheels with different transmission ratios (1/10/100) - 3-jaw face spiral lathe chuck FORKARDT Ø 250 mm type CSN, 1 set of soft top jaws - quick-change tool holder MULTIFIX size B with 2 inserts - 1 piece of centering point running with the tool - 1 piece quick-action drill chuck RÖHM, 3-16 mm - hinged lathe chuck guard - hinged working area protection doors - chip tray with coolant device under the machine bed Gijlhcsh Hvk Ajdwwep - Switch cabinet fixed to the machine - Interface RS 232 Space requirement L x W x H 2600 x 1450 x 1550 mm weight 1950 kg good condition

Condition: excellent (used), Year of construction: 1999, functionality: fully functional, Citizen CINCOM M12 – Swiss / Sliding Headstock automatic lathe Rok produkcji maszyny: 1999 Rok produkcji podajnika: 2009 Gielhcdjyt D Azswwsp Technical data: • Max. bar diameter: 12 mm • Max. turning length: 200 mm • Main spindle speed: 12,000 rpm • Spindle power: 2.2 kW • Counter spindle speed: up to 10,000 rpm • Number of axes: 7 (C-axis on both spindles) • Machine weight: 2,580 kg • Control: CNC Cincom / Mitsubishi M6 • C-axis and driven tools – milling, drilling, threading possible Equipment: • LNS Tryton 112 • Guide bushings • Live tools • Set of fixed holders • No chip ejector M12 number of axes X1, Y1, Z1, X2, Z2, X3, Z3, C1, C2 Tool list: Gang tool post: T1-T5 fixed tools T6-T8 driven tools (holders included) Turret: T20-T29 fixed or live tools, possibility to install more than one tool per station. Backspindle tool post: T41-T43 fixed tools, no possibility of installing driven holders Technical condition: The machine is in very good condition, after technical inspection, ready for immediate operation. Application: Precision automatic lathe for serial production of small turned parts from Ø 1–12 mm bar stock. Additional information: • Full documentation available and possibility of voltage testing. • Transport and loading at the buyer's request.

Condition: excellent (used), Year of construction: 1986, RAFAMET type KCF 400 Morę information on request Gelhcjytq T Hjdwweip

Condition: ready for operation (used), Year of construction: 2018, functionality: fully functional, Vertical Turret Lathe - Double Column Brand: WALDRICH SIEGEN | Year of construction: 2018, commissioning: 2019 High-performance turning and milling unit with a modular design system for optimal adaptation to customer requirements. Fully hydrostatic guidance of all main axes for the highest cutting performance and precision. Main structural components made of high-performance cast iron for the best damping characteristics and high stiffness. Condition: Ready for use / operational. The machine can be inspected by appointment. Total operating hours: 65.432 h TECHNICAL DATA: Portal, passage width: 6.000 mm Travel distances: - Horizontal support (X1/X2 axis): 5.160 mm - Spindle slide vertical (Z1/Z2 axis): 2.000 mm - Distance X1/X2 (centre of spindle): min. 2.100 mm - Crossbeam vertical (W axis): 1.800 mm - Horizontal measuring device (X3 axis): 7.065 mm Gielhcdeynbxcewwep - Vertical measuring device (Z3 axis): 2.350 mm Faceplate: - Clamping surface diameter: 5.000 mm Rotary table: - Drive power: 2 x 110 kW - Number of gear stages: 2 Support Spindle drive: - Spindle drive power: 63 kW - Number of gear stages: 2 - Speed range stage 1: 0 - 600 rpm - Speed range stage 2: 0 – 3.000 rpm Spindle carriage: - Cross-section: 400 x 400 mm Electrical: - Total connected load: approx. 361 kVA EQUIPMENT: - Two rotary and milling supports - CNC-Control: SINUMERIK 840D sl - External and internal cooling lubricant supply - Chip conveyor (belt filter) - Extraction and filter system, Keller Vario - Workpiece measuring probe: Renishaw, RMP 60 - Additional accessories ... No guarantee is given for the completeness and accuracy of the technical data and equipment. Detailed technical data sheet and information on equipment available on request.

Condition: used, Year of construction: 2007, Technical details: faceplate diameter: 1600 mm Gijlhcdwex Aq E Howsp power requirement: 80 kW weight of the machine ca.: 25 t dimensions of the machine ca.: 4,4 x 4,62 m max. workpiece diameter: 2000 mm max. diameter of face turning: 1800 mm tool taper: ISO50 The machine has been regularly serviced and is in good technical condition. With C-Axis *

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, Technical details faceplate diameter 1800 mm swing diameter 2000 mm turning height 1270 / 1120 mm Control SIEMENS 840 D workpiece weight max. 5000 kg ram head dimension 250 x 250 mm table turning speeds 1 - 320 U/min cross rail - adjustment 400 mm ram head - cross travel (X) -2770 / +2275 mm ram head - vertical travel (Z) 1250 mm c-axis 360° (0,001°) deg milling drive 37 kW turning speed range - milling 10 - 3000 U/min power capacity - table 100 kW Torque 31784 Nm Gijlhjyrpyvscdwwjp feed range (X/Z) 0,1 - 15000 mm/min weight of the machine ca. 55 t Additional information Used CNC vertical lathe for turning, drilling and milling First machine installation in the year 2011. Max. workpiece diameter: 2040 mm Max. workpiece height: 1270 mm Ram stroke: 1250 mm Max. workpiece weight: 5000 kg (per pallet/chuck) Table speed range: 1.0 - 320 rpm Table drive motor: 100 kW Drilling and milling spindle: 37 kW Crossbar travel: 2 steps of 200 mm each Total electrical connection value: 218 kVA CNC control: Siemens 840 D Number of NC axes: 4 (X, Z, C, crossbar adjustment) Travels: X-axis: -1650 to + 2165 mm Z-axis: 1250 mm Rapid traverse X- Z-axis: 15 m/min Number of tool magazine spaces: 80 spaces in the chain magazine, of which 60 x HSK 100 and 20 x Capto C6 Disc magazine 12-pos. for rotary holders and attachment heads Coolant system with filter and circulation unit Chip conveyor Oil-mist-extractor 1 pallet with jaws, diameter 1800 mm 1 hydraulic chuck with base jaws, diameter 1800 mm Various drilling and milling heads 2 measuring probes Several turning tool holders Special feature: Pallet changer with two stations, equipped with a face plate Ø1800 mm and a six-jaw lever compensation chuck with mechanical centrifugal force compensation Ø1800 mm. Note: The machine is in a pit. Condition description: The cross roller bearing on the Carnaghi was replaced about half a year ago. The Siemens components in the control cabinet were also completely replaced at the end of 2023. The machine also has a measuring probe for tool measurement and an external Renishaw measuring probe for workpiece measurement. As a special feature, the machine also has a measuring probe installed on the Z-axis (Z1-axis). This brings an advantage in terms of accuracy and time, as the tool does not have to be put down for measuring. However, it is currently shut down and should be overhauled when it is put back into operation. The machine also has a Rotomors six-jaw lever compensating chuck with centrifugal force compensation, which was completely overhauled in 2020/21.

Condition: good (used), Year of construction: 2003, functionality: fully functional, Technical details Gjljyrn I Sshcdwwoip working diameter max. 32 mm spindle passage 36 mm turning length 320 mm Control MITSUBISHI MELDAS 635LC travel max. (X1) 108 mm travel max. (Y1) 275 mm travel max. (Z1) 325 mm travel max. (X3) 238 mm travel max. (Z3) 410 mm main spindle speeds: 200 - 8000 U/min c-axis 0,001° deg. Subspindle spindle speeds 200 - 7000 U/min c-axis 0,001° deg. rapid traverse 20 m/min main drive 3,7 / 5,5 kW Subspindle motor 1,5 / 2,2 kW dimensions of machine 2,77 x 1,24 x 1,79 m weight of the machine ca. 2850 kg Additional information CNC Swiss-Type Lathe First put into operation December 2005 The machine was used for a single shift and is in good condition with no maintenance backlog. Equipment: FMB Turbo 5-42/3200C bar loader, built 2004 High-pressure pump Many collet chucks for main spindle Various collets Drive unit for synchronously driven guide bush Synchronously driven guide bush Drive unit for transversely driven spindle on linear support Pick-up spindle Collet chuck for pick-up spindle Blow-out device for pick-up spindle Five fixed tool holders on the rear Workpiece removal device Coolant tank Central lubrication system Door lock Ejection device for workpieces with through holes Machine documentation The machine will be sold without tools and extraction system.

Year of construction: 2012, operating hours: 0 h, condition: new, machine/vehicle number: 01312012-5, 7 axes simultaneous, control Fanuc 32i-A Manufacturing origin Taiwan Voltage 400/50/3 Netweight 2400 kg Custom position 8458.11 20 Dimensions 2605 x 1420 x 2150 mm TECHNICAL DATA : - max turning dia of main spindle 20 mm - max turning dia of sub spindle 20 mm - max turning length (fixed guide bush) 200 mm - max turning length (rotary guide bush) 85 mm (option : 150 mm) - max turning length (non guide bush) 45 mm - max drilling capacity of main spindle 10 mm - max drilling capacity of sub spindle 10 mm - max tapping capacity of main spindle M8 - max tapping capacity of sub spindle M8 - max cross drilling capacity 10 mm - max cross tapping capacity M6 - number of external turning tools 8 pcs - number of internal turning tools 5 pcs - number of cross drillings 4 (option : 7) - face tool holder (sub spindle) 4 pcs - size of tool 12 x 12 x 90 mm - number of axis controls 7 (X1/Y1/Z1/X2/Z2/C1/C2) - bore of spindle 29 mm - spindle speed range 200 ~ 8000 t/min - rapid traverse X / Z 24 m/min - main spindle motor 3.7 kW - sub spindle motor 2.2 kW - motor axis X1 / Z1 0.5 / 0.75 kW - motor axis Y 0.75 kW - cross drilling motor 0.75 kW - end drilling motor 0.75 kW - motor axes X2 / Z2 0.5 / 0.5 kW - coolant motor 0.375 kW - power requirement 15KVA errors and omissions excepted data gived without obligation Inventory nr. 1120009, standard accessories Spindle servomotor External tool holder (8-tool) Internal tool holder (5-tool) Parts catcher Tools & toobox Lighting device Non guide bushing holder Cutting coolant (pump 4T6-6) Lubrication device Operational manual Pressure pushing shank 2 sets Guide bushing x 1 (TD-25S type 16°) Collet chuck x 2 (TF-25 type 16°) Side drilling tool holder (7 tools) Sub-spindle Part conveyor Double C axis Fixed drilling tool holders for sub-spindle x2 Golhcsd Hr Imjdwwoip Drilling and milling tool holder for sub-spindle External turning tool holder for sub-spindle Sub-spindle tool holder for 4-position excentric end drilling Cutting coolant inspection Formal CE Fixed guide bush holder (TD-25 S type 16°) Chip conveyor with cart Transformer Coolant chiller High pressure coolant blocks