Used Bale Clamp for sale (9,524)

Condition: good (used), Strautmann AutoLoadBaler baling press Hedpfx Aiov Aktnsrew Suitable for baling: Cardboard Film PET bottles Foam Cans Electronic waste Machine dimensions (length / width / height) mm: 2047 / 2179 / 3050 Opening approx. 1192 mm / 575 mm Bale size (length / width / height) mm: 1200 / 800 / 1100 Bale weight approx. 480 kg Pressing force kN: 530 Year of manufacture: 2017-2018

Condition: excellent (used), Year of construction: 2010, 1. Clamping table, square design, manufactured by AMF, dimensions 600 x 1060 mm, year of manufacture 2010. Width 600 mm, height 1060 mm (4 sides). Base plate: 760 mm x 735 mm x 50 mm. Grid hole spacing: 50 mm x 50 mm, thread: M16. New price: €12,000. Hsdpsz N S Egofx Airjw In very good condition.

Condition: good (used), Year of construction: 2009, functionality: fully functional, pressing force: 61 t, filling opening width: 1,420 mm, filling opening length: 972 mm, bale width: 1,100 mm, bale height: 720 mm, total width: 2,085 mm, total length: 8,740 mm, type of input current: three-phase, input voltage: 400 V, overall weight: 18,000 kg, pressure: 280 bar, oil tank capacity: 800 l, power: 22 kW (29.91 HP), Used Baseline 60 for sale. The machine underwent its last maintenance in March 2026, and nothing unusual was found. The machine is fully functional and has now been taken out of production. The machine is in good condition. Technical specifications: Year of construction: 2009 Main pump drive: 22 kW Needle drive: 4 kW Filter pump: 2.2 kW Oil cooler: 1.5 kW Working pressure: 280 bar Oil tank capacity: 800 L Pressing force: 61 tons Specific pressing pressure: 7.7 kg/cm2 Pressing stroke: 2000 mm Dimensions of pressing channel: 1100 x 720 mm Volume of pressing chamber: 1.6 m3 Bale length (adjustable): 1300 mm Bale weight (approximate): up to approximately 500 kg Number of binding wires: 5 vertical Dimensions of filling chute: 1420 x 972 mm Weight of press: approximately 18 tons Hedpozlnb Djfx Airsw Noise level: < 85 dB(A) Average cycle time: 19.2 sec Capacity (depending on the material, material feed, and bale weight): 30 kg/m3: 6.9 tons/hour 60 kg/m3: 12.8 tons/hour 100 kg/m3: 19.2 tons/hour 150 kg/m3: 25.8 tons/hour

Condition: ready for operation (used), HSM V-Press 860 baler, year 2008–2009, price: €5,800 Pressing force: 54 kN Specific pressing force: 63.46 N/cm² Drive power: 7.5 kW Hodora Rbgepfx Airjw Cycle time: 25 s Loading height: 1,110 mm Feed opening width x height: 1,195 x 650 mm Bale dimensions (L x W x H): 1,200 x 780 x 1,200 mm Bale weight: 480 kg Machine dimensions (W x D x H): 1,797 x 1,247 x 2,985 mm Machine weight: 2,008 kg Binding material: wire Materials processed: foil, mixed paper, cardboard, die-cut waste, textiles, Big Bags, polystyrene HSM V-Press 860 plus, year 2013–2015, price: €8,000 HSM V-Press 860 L, year 2015, price: €9,000 HSM V-Press 860 plus, year 2019, price: €9,000 HSM V-Press 860 plus, year 2024, price: €10,000 HSM V-Press 860, new/ex-demo, year 2020, price: €13,000 4-fold bale wire tying Bale dimensions (L x W x H, mm): 1,200 x 800 x 1,000–1,200 Bale weight: approx. 500 kg Technical data (L x W x H, mm): 1,213 x 1,824 x 2,987 Feed opening (mm): 1,200 x 565 Cycle (s): 35 Pressing force (t): 54 Power supply (V): 400 (three-phase) HSM V-Press 860 plus B, year 2020, price: €14,000 Pressing force: 594 kN Voltage/Frequency: 400 V/50 Hz Drive power: 4 kW Feed opening width x height: 1,500 x 651 mm Bale dimensions (L x W x H): 1,500 x 780 x 1,200 mm Bale weight: 550 kg Feeding type: Manual Machine dimensions (W x D x H): 2,099 x 1,245 x 2,985 mm Machine weight: 2,336 kg Binding material: wire Material processed: foil, cardboard Idle cycle time: 25 s

Condition: ready for operation (used), Dixi 60 hydraulic press, manufactured in 2019 Pressing force: 60 tons Beam dimensions: 120 x 80 x 110 cm Press dimensions: 1900 x 1400 x 2200 mm (height) Hedpov Alacefx Airew Press weight: approx. 2430 kg Beam weight: up to 500 kg Oil heating Motor: 7.5 kW

Condition: excellent (used), Year of construction: 2020, Baling press, MACFAB, – used –: Price ex works: €13,500.00 (net)! Manufacturer: MACFAB Systems Ltd Type: BMF650 Auto HT RAL - MM9.8 Year of manufacture: 01/2020 Serial number: MF J144 Weight: 1770 kg Operating hours: approx. 16h Automatic operation & "Bale ready" indicator Horizontal door that pivots to the side Hodpfx Aijzxciiorsw Surface / Color: RAL6018 Feed opening: 1,500x880x769mm (WxHxD) Dimensions, press: 2,100x1,524x3,217mm (WxDxH) Former new price: €18,921.00 Condition: The machine was only used once for testing purposes. Available: immediately Location: 72336 Balingen

Condition: used, Model: HSM V-press 1160 plus baler Pressing force (kN): 59 Output (bales/h): 1-2 Max. bale size (mm): 1200x1100x1000-1200 Dimensions (L x W x H, mm): 1780x1150x2985 Power (kW): 4kW Hodpfsv Al Tiox Airow Weight (kg): 2300 Year of manufacture: 2018-2019

Condition: like new (used), Year of construction: 2005, functionality: fully functional, Müller Martini Corona, (~2005), complete clamping unit, for a machine with a maximum speed of 18,000 units/hour. Hsdjz Au I Eepfx Airow - Part numbers: 3010 1011 9 and 3010 1013.9 The entire clamping unit is available for sale as a spare part.

Condition: used, Year of construction: 2018, Channel baling press Avermann AVOS 1810 BRK-90/100, year of manufacture 2018, with cross-tying Technical data: Manufacturer: Avermann Type: AVOS 1810 BRK-90/100 Year of manufacture: 2018 Pressing force: 100 t Drive power: 2 x 45 kW Dimensions of feed hopper: 1,800 x 1,000 mm Throughput at 35 kg/m³: 15.0 t/h Throughput at 60 kg/m³: 20.0 t/h Throughput at 100 kg/m³: 29.0 t/h Bale dimensions: 1,100 x 750 mm (W x H), length variable Bale weight: up to 650 kg, material-dependent Tying: 5-fold vertical, 3-fold horizontal, automatic Machine dimensions: approx. 11,200 x 2,400 x 3,900 mm (L x W x H) Machine weight: approx. 29,000 kg Please note: All technical data refers to the manufacturer's specifications. We assume no liability for the information provided or for any errors. The offer is non-binding, subject to prior sale and may be withdrawn at any time. Inspections are possible by arrangement. Hjdsz H I Dxepfx Airsw The sale is made against prepayment, ex works, without warranty. Our payment terms are 100% prepayment.

Condition: used, Year of construction: 2018, pressing force: 80 t, filling opening width: 1,040 mm, filling opening length: 1,110 mm, bale length: 1,200 mm, bale width: 1,120 mm, bale height: 1,120 mm, bale weight: 600 kg, total width: 1,830 mm, total height: 2,620 mm, total length: 4,200 mm, type of input current: three-phase, input voltage: 400 V, input current: 32 A, overall weight: 8,000 kg, input frequency: 50 Hz, DIXI 80 SLD Horizontal Baler – Year of Manufacture 2018 Used, fully functional DIXI 80 SLD horizontal baler for the economical compaction of cardboard, paper, and comparable recyclable materials. Technical data: Manufacturer: DIXI Model: 80 SLD Year of manufacture: 2018 Pressing force: 80 t Drive power: 11 kW Connection: 400 V / 32 A Feed opening: approx. 1,040 x 1,110 mm Bale size: approx. 1,120 x 1,120 x 1,200 mm Bale weight: approx. 500–600 kg, depending on the material Press cycle: approx. 35 seconds Throughput: up to approx. 1,000 kg/h, depending on the material Machine weight: approx. 8,000 kg Machine dimensions: approx. 4,200 x 1,830 x 2,620 mm (L x W x H) The machine is in used, fully functional condition. All information is provided without warranty. Subject to prior sale. Hodpfx Aez Hqwbsirew

Condition: like new (used), Year of construction: 2022, functionality: fully functional, mount diameter: 38 mm, clamping range: 38 mm, Reishauer clamping device, base unit, basic chuck FK 38 suitable for Reishauer gear grinding machine, fits on the spindle for grinding machines RZ 150 / RZ160 / RZ 260 clamping diameter 38 mm for n max. = 3,000 rpm balanced Hedewzkcxjpfx Airjw with clamping stroke control / 3-point support control and media feed for additional functions: clamping / air system control / clamping stroke monitoring incl. assembly and operating instructions, as well as Reishauer wooden transport container as new – hardly used, from our stock 2 units available Price negotiable Our asking price is € 3,990.00 net ex works, plus packaging costs All technical specifications are subject to printing errors and changes. We only sell to countries within the European Community.

Condition: excellent (used), The following HWR components are for sale, among others: Chuck jaws and centering devices • 1 INOFlex VL120, 4-jaw manual chuck, Ø 1,150 mm, Art.-No. 846120 • 1 INOFlex VL060, 4-jaw manual chuck, Ø 600 mm, Art.-No. 846060 • 1 INOFlex VF026, self-centering 4-jaw centering device, Ø 260 mm, Art.-No. 842026 INOZet pivoting bridges • 1 set WT063-4-WV25, clamping range Ø 270–630 mm, Art.-No. 750180 • 1 set WT120-4-WV83, clamping range Ø 600–1,200 mm, Art.-No. 750181 • 1 set WT063-4-WV24, clamping range Ø 182–630 mm, Art.-No. 750179 Gripper jaws and adapter jaws • VR16, reversible gripper jaws for VL060/VL070/VL080, Art.-No. 850016 • VP17, soft adapter jaws, Art.-No. 851017 • WR16-8, reversible gripper jaws for INOZet pivoting bridges, Art.-No. 760162 • WP16-8, soft adapter jaws, Art.-No. 770117 • WP25-8, soft adapter jaws, Art.-No. 770126 • VR12, reversible gripper jaws for VF026, Art.-No. 850012 Movable jaws and fixed stops • VCF120, fixed stops, Art.-No. 854016 Hjdpoz Ira Tefx Airjw • VCB120, movable jaws, Art.-No. 854018 • VCF070, fixed stops, Art.-No. 854006 • VCB070, movable jaws, Art.-No. 854007 • VCB026, movable jaws, Art.-No. 854019 • VCF026, fixed stop jaws, Art.-No. 854020 • VCB028, movable jaws, Art.-No. 854029 • VCG026, movable, reversible jaws with gearing, Art.-No. 854033 In addition, various related T- and double T-slot nuts, fastening screws, and other accessories are available. Total net new price: 117,000 EUR Purchases were made in 2021 and 2023. The attached images provide an initial overview of the available components.

Condition: like new (used), functionality: fully functional, Clamping elements Dimensions, W x D approx. 100 x 150 mm Overall height 91.5 mm Jaw width 30 mm Lowest support height on jaws 68.5 mm Middle support height 80 mm Clamping height per jaw approx. 11.5 mm Jaw clamping travel approx. 25 mm Hedpjz Td A Ejfx Airew

Condition: not inspected (used), Year of construction: 1985, functionality: fully functional, pressing force: 50 t, bale length: 1,000 mm, bale width: 750 mm, bale height: 75,07,50,750 mm, bale weight: 500 kg, input voltage: 400 V, overall weight: 7,500 kg, oil tank capacity: 500 l, power: 30 kW (40.79 HP), empty load weight: 7,500 kg, input frequency: 50 Hz, Manufacturer: Paal Typ: Pacomat V Year of construction: 1985 Press power main press: 50 t Specific press capacity: 5 kg/cm² Feed channel: 1.000 x 720mm (l x w) Theoretic throughput rate: 200 cbm/h Bale size: 700 x 1.000 mm (w x h) length adjustable Driving motor: 30 kW Hodpsic Rl Djfx Airsw Bale weight: approx. 500 kg Machine weight: approx. 8000kg The hydraulic unit is functional, the drive motor is in the removed state.

Condition: reconditioned (used), functionality: fully functional, The used BERGONZI TR 40 radial drill is a robust drill press, complete with hydraulic clamps and a worktable, with a maximum drilling capacity of 40 mm in steel and an arm length of 1250 mm; it comes complete with a worktable, a new coolant system, and all necessary regulatory adjustments. Hedj Ad N Exepfx Airsw

Condition: ready for operation (used), The DIXI 60SLD is a semi-automatic baling system with a pressing force of 60 tons, designed for the economical reduction of volume of residual materials (suitable for recycling) in industry and crafts: Cardboard boxes Foam PET bottles Insulation mats and other compressible materials. Horizontal baler, waste press DIXI 60 SLD with ejector Technical specifications: Pressing force: 60 tons, Unit pressure: 6.81 kg/cm², Power supply: 400V / 7.5kW Bale dimensions: 800x1100x1200 mm, Number of ties: 3 Bale weight: approx. 370-410 kg, Tying: manual Loading aperture: 990 x 1110 mm, Hjdpfxsra A E Uj Airew Machine weight: 5420 kg Average pressing cycle: 47 seconds Year of manufacture: 2011-2016 Dixi 80SLD Baler Technical data of the Baler Brand: Dixi Model: 80 SLD Pressing force: 80 tons Drive power: 11 kW, 400 V / 32 A Infeed opening (width x height): 1040 x 1110 mm Pressing cycle: approx. 35 s Capacity: approx. 1000 kg/h Bale size (width x height x length): 1120 x 1120 x 1200 mm Bale weight: Depending on the material, approx. 500–600 kg Bale tying: 3-fold, manual Machine dimensions: Length: 4200 mm (+cage 1600 mm) Width: 1830 mm Height: 2620 mm Machine weight: approx. 8000 kg Automatic bale ejection Robust construction for long-term use Year of manufacture: 2016-2020 Weight: approx. 8.4 tons Condition: Used Price: 14,000 EUR

Condition: excellent (used), functionality: fully functional, overall weight: 60 kg, total height: 175 mm, jaw width: 200 mm, total length: 615 mm, total width: 200 mm, jaw height: 60 mm, clamping width: 200 mm, clamping range: 435 mm, Equipment: type plate available, Allmatic-NC machine vice, high-pressure clamping device Type LC 200 including a second pair of clamping jaws, width 200 mm Jaw width 200 mm Base body, type LC 160/200 (for jaw widths of 160 and 200) Base body width 164 mm Clamping force adjustable, max. 60 kN Level 0: direct Level 1: 15 kN Level 2: 30 kN Level 3: 45 kN Level 4: 60 kN Clamping range a: 0-250 mm Clamping range b: 189 – 435 mm Jaw height 60 mm Base body length 530 mm Overall length 615 mm Base body height 115 mm Weight 60 kg Used, in good condition optional: Clamping jaws, width 160 mm, height 50 mm, new € 200.00 Aluminum jaws, width 200, height 60 mm, height 80 mm, new € 200.00 Worm gear € 100.00 Hsdpfszfimuex Airew

Condition: ready for operation (used), Technical specifications of Dixi 60 AUTOMAT baler Filling opening (W x H): 1550 x 1000 mm Drive power: 31.5 kW Pressing force: 60 t Bale weight (depending on material): 350–600 kg Bale dimensions (W x H x D, adjustable): 1100 x 800 x 300–1600 mm Hjdpov Amw Nofx Airow Pressing/cycle time: 13/24 s Machine weight: 7000 kg

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, pressing force: 40 t, bale weight: 350 kg, HSM HL 4010 Re / Li horizontal baler. Equipped with a loading tipper for the basket. Manufactured in 2015. Very good condition - regularly serviced by an authorized service center. Ready for use. Available for binding with wire, string, or polypropylene tape. Semi-automatic baler system with a 40-ton pressure for economical volume reduction of residual (recyclable) materials in industry and retail: Cardboard Tetra packs Films Foams PET bottles Insulation mats and other compressible materials. Press force: 400 kN Transport width: 1,767 m Hodpjz Aaggjfx Airow Transport height: 2,489 m Transport length: 5,573 m Weight: 4,500 kg Drive power: 7.5 kW Bale weight (depending on material): 300-350 kg Bale length x width x height: 750 x 1200 x 750

Condition: used, Technical data: Hjdpfjv Akmzjx Airsw Pressing force: 178 kN Drive power: 4 kW Work cycle time: 23 s Loading height: 928 mm Loading opening width x height: 1195 x 558 mm Bale length x width x height: 1200 x 780 x 1000 mm Bale weight: 250 kg Machine width x depth x height: 1700 x 1075 x 2499 mm Machine weight: 1300 kg 4-fold with polyester tape Year 2010-2013

Year of construction: 2018, condition: excellent (used), functionality: fully functional, For sale are 10 GARANT ZeroClamp clamping devices, type 10012. The clamping devices are used, in good condition, and fully functional. New price per unit: €661.20 plus VAT. Available for sale individually or as a complete package. If you are interested or have any questions, please do not hesitate to contact us. Inspection possible by appointment. Shipping and inspection are possible! Product details Technical data Series: ZeroClamp Manufacturer's designation: ZeroClamp clamping device, type: 10012 Clamping device diameter: 120 mm Maximum clamping force: 25 kN Material: Steel Indexing hole available: no Product type: Clamping device Identification & Classification Article number: 360040 10012 EAN / GTIN: 4045197415820 Manufacturer's number: 360040 10012 Description Design: All components are made of stainless or corrosion-resistant steel. The zero-point clamping of the GARANT ZeroClamp system is an important function for modern manufacturing systems, especially in automated manufacturing. Thanks to a special contact interface, it guarantees precise and reliable zero-point repeatability. The pneumatic clamping force of the system holds workpieces securely in the desired position, allowing for quick and accurate workpiece changes without re-positioning. This reduces setup effort and increases productivity. The zero-point clamping of the GARANT ZeroClamp system is essential for efficient manufacturing processes. Learn more about the innovative technology of GARANT ZeroClamp and optimize your production. Hsdpez E Rdfofx Airjw Application: For individual installation in clamping fixtures.

Condition: used, 1-Zangen Klebebinder - 1-Clamp Perfect Binder W. Gantenbein BAFC 33 Year 1963 - Serial-No. 0418 1 Clamp hotmelt binder Hsds Agp Dqopfx Airow Block back roughing with suction Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test

Condition: used, Year of construction: 2005, power: 7 kW (9.52 HP), FOR SALE / FOR RENT: VERTICAL BALER! (Rental available in Lithuania, Latvia, Estonia, and Poland) Technical Information: Manufacturer: HSM Model: HSM 500 VL Pressing force: 54–540 kN Bale size: 1200 x 800 x 1200 mm Bale weight: approx. 500 kg Hedpfxez Ehgwe Airjw Max. bale size: approx. 1200 x 800 x 1200 mm (W x D x H) Press chamber dimensions: 1200 x 800 x 1520 mm (W x D x H) Motor: 7.5 kW Year of manufacture: 2005 SALE PRICE - 4400 EUR + VAT RENTAL PRICE - 160 EUR + VAT

Condition: used, Technical details: table length: - mm table width: - mm Hsdjzuzr Iopfx Airew table load: - t height: 1250 mm width: 1000 mm depth: 800 mm weight of the machine ca.: 1200 kg 2 units available (price per unit) According to DIN 650: 6 × T-slots When making your inquiry, please specify the number of clamping angles required. *

Condition: used, Bramidan 4-X25 – High-performance baler for waste compaction Suitable for various materials, including stretchable types Large, wide chamber Safety locks prevent material expansion inside the chamber Short cycle time allows fast waste processing TYPES OF WASTE: Cardboard Plastic film Paper PET bottles Aluminum cans Rigid plastics Textiles EPS Styrofoam Steel cans Hsdpfx Ajv Ak Dgsirjw BALE DIMENSIONS 1200 x 800 x 800 mm PRESSING FORCE 25 t BALE WEIGHT Cardboard (kg): 200-300 Plastic film (kg): 250-350 Price 4500 EUR