Used Bale Clamp for sale (9,110)

Condition: used, Year of construction: 2012, pressing force: 40 t, Manufacturer: HSM Model: HL 4010 Li Year of manufacture: 2012 Pressing force: 40 t Csdpfex H R U Sox Agksgp

Condition: good (used), Year of construction: 2011, operating hours: 40,000 h, functionality: fully functional, pressing force: 88 t, filling opening width: 990 mm, filling opening length: 1,800 mm, bale length: 1,200 mm, bale width: 1,100 mm, bale height: 750 mm, overall weight: 23,000 kg, oil tank capacity: 2,000 l, power: 90 kW (122.37 HP), volume flow: 643 m³/h, Good day, We hereby offer, subject to prior sale, a used baler including conveyor belt, wire tying stations, and bale chute from the manufacturer HSM GmbH + Co. KG, model VK 8818 FU. The following technical specifications were taken from the manufacturer's operating manual and brochures; we do not assume any liability for the correctness or completeness of this information. Manufacturer: HSM GmbH + Co. KG, Germany Csdpfxeymmtce Agkjgp Model: VK 8818 FU Year of manufacture: 2011 Operating hours: approx. 40,000 hours as of July 2025 Main press force: 880 kN Specific press force: 107 N/cm² Feed opening dimensions: 990 x 1,800 mm Theoretical throughput: 643 m³/hour Bale dimensions: 1,100 x 750 mm, length adjustable from 600 up to 2,000 mm Drive power: 2 x 45 kW, frequency-controlled Tying: 5-fold horizontal, fully automatic Baler dimensions (set up): 12,130 x 4,800 x 3,270 mm (L x W x H) Overall installation dimensions with conveyor system: 14,000 x 23,000 x 7,745 mm (L x W x H) Note: The machine was used in a recycling facility for compacting paper, cardboard, and film. The press is in good condition and will be replaced with a new, larger press in May/June 2026. Until then, the machine can be inspected in operation with material. We would be pleased if this baler is of interest to you. Your Mertens & Frowein GmbH service team

Condition: used, functionality: fully functional, load capacity: 3,000 kg, empty load weight: 330 kg, Device clamp Condition: Ready for use and fully functional Technical condition: very good Description: In addition to this Riman model, we have approx. 200 heavy-duty forklift trucks, compact forklift trucks, forklift trucks & sideloaders in our warehouse in Hamburg and Gdansk. Visit our homepage - sago-online Hire purchase & financing at favorable conditions are always feasible for us. We are also happy to buy your used truck free of charge, even without you purchasing a vehicle from us. Our owner Mr. Peter Sawitzki will be happy to advise you in detail on this PH100 P.S.: Our master forklift workshop specializes in repair, maintenance, overhaul and special construction for forklifts from 8 tons. We are also happy to display your vehicle for sale on consignment. Cgsdju Dzzpepfx Agkep

Condition: used, length 575 mm width 510 mm height 1015 mm Clamping table, clamping plate, T-slot table Dimensions Table length: 575 mm Table width: 510 mm Table height: 1015 mm Cjdpfsylz Edox Agksgp

Condition: used, length 1000 mm width 800 mm height 630 mm weight 460 kg T-slot - width 50 mm Clamping table, clamping plate, T-slot table Cgjdpfsgrngdox Agkjp Dimensions Table length: 1000 mm Table width: 800 mm Table height: 630 mm T-slot length: 50 mm Weight: 460 kg

Condition: used, table length 1000 mm table width 1000 mm table load / t Cgsdpfx Agsgrndiekjp weight 1100 kg table height 100 mm

Condition: excellent (used), Technical data: Pressing force: 178 kN Drive power: 4 kW Work cycle time: 23 s Loading height: 928 mm Loading opening width x height: 1195 x 558 mm Bale length x width x height: 1200 x 780 x 1000 mm Bale weight: 250 kg Machine width x depth x height: 1700 x 1075 x 2499 mm Cgodpfx Aev Akmzegkep Machine weight: 1300 kg 4-fold with polyester tape Year 2010-2013

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, machine/vehicle number: 386, pressing force: 50 t, filling opening width: 1,110 mm, filling opening length: 1,050 mm, bale width: 1,050 mm, bale height: 730 mm, bale weight: 425 kg, total width: 2,100 mm, total height: 3,100 mm, total length: 5,000 mm, overall weight: 6,800 kg, transport height: 2,400 mm, power: 22 kW (29.91 HP), The press was replaced by a larger one. It was used normally until dismantling. All functions were fully operational. The press is located at Chemnitzer Str. 96, 09212 Limbach-Oberfrohna. Cjdpfx Agsypb Awokegp

Condition: new, functionality: fully functional, 1 pair of prism blocks with clamping bracket Angle prisms 100x62x48 mm Cgsdpfxsym U H Re Agkop Weight: 4 kg

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, pressing force: 100 t, Technical specifications: Pressing force: 1,000 kN Specific pressing force: 121.2 N/cm² Drive power: 45 + 45 kW, frequency-controlled Voltage/Frequency: 400 V / 50 Hz Cedpfx Aeygud Ajgkjgp Idle cycle time: 8.3 s Theoretical idle throughput: 643 m³/h Theoretical capacity at 50 kg/m³: 32.15 t/h Feed opening width x feed opening length: 970 x 1,800 mm Bale width x bale height x bale length: 1,100 x 750 x 600–2,000 mm Bale weight: max. 700 kg or 800 kg, depending on material The baler feed system includes the following components: - 1 fully enclosed STADLER chain conveyor with appropriate shaft covers - 1 support and maintenance platform for conveyor and hopper - 1 STADLER conveyor - 1 automatic channel baler HSM VK8818 R FU (100 t) - 1 wire rack for 500-kg soft wire coils - 10 wire coil trolleys - 1 multi-control system for the baler - Full construction documentation and maintenance history - Serviced and maintained by the manufacturer Commissioning available upon request. Weight: 33,000 kg Tying method: wire Processable materials: plastic film, mixed paper, cardboard, hollow HDPE/LDPE containers, and plastic bottles The system is operational and can be inspected during operation. The machine will be dismantled on 16/02 and can then be inspected at our facility. Immediately available!

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, pressing force: 70 t, HSM HL 7009 Re / Li horizontal baler. The machine is in very good condition and regularly serviced by an authorized service center. This baler is designed for larger waste disposal projects in retail outlets and small and medium-sized central warehouses. Bales from the HL 7009 model have a cross-section of 1100 x 1100 mm and, with a bale length of 1200 mm, can weigh up to 600 kg, ensuring optimal utilization of the truck's payload. Pressing force: 700 kN Specific pressing force: 58 N/cm² Drive power: 10.5 kW Voltage / frequency: 400 V / 50 Hz Idle capacity (theor.): 42.97 m³/h Csdpfjymxicox Agksgp Loading opening width x length: 890 x 1020 mm Bale width x height x length: 1100 x 1100 x 1200 mm Total length x width x height: 5366 x 2525 x 2559 mm Bale weight: 600 kg

Condition: good (used), Year of construction: 1981, functionality: fully functional, Equipment: documentation/manual, Automatic channel baler BOA Continu 25 LB + conveyor belt. The baler is in good condition and has been regularly serviced. Recently, the Denison pump underwent a complete overhaul. Fully functional and in continuous operation. Please contact us for further information. Cgedpsw S Tv Usfx Agkop

Condition: good (used), Clamping table, clamping angle, T-slot table, rotary table, milling machine table -Clamping angle: for workpiece clamping -Clamping surface: 1667 x 1300 mm -Wall thickness: 45 mm -T slots: slot width 18 mm -Dimensions: see photos -Dimensions: 1667/1000/H1400 mm Cgodpfehtn Sfox Agkop -Weight: 1548 kg

Condition: new, Double sine table with fine-pole magnetic chuck Magnetic chuck with mechanical on/off switch. Precise and stable construction. Tiltable in 2 axes. Cgsdpsymzpfefx Agkep For clamping and machining workpieces at any required angle. Uniform holding force across the pole face. Accurate angle adjustment via gauge blocks. Length: 300 mm Width: 150 mm Height: 142 mm Angle: 0–60° Weight: 37.5 kg

Condition: new, table length 2000 mm table width 1000 mm table height (lateral area) 200 mm weight 699 kg SIEGMUND authorized dealer - all items available! Product description - Through hardened tool steel X8.7 + plasma nitriding - Material thickness approx. 24.5 - 27 mm - Sidewall made of high quality steel S355J2 + N + plasma nitriding Cedpfsxabfrox Agkogp - Hole Ø 28 mm - Surface holes in a diagonal grid - Rounded corners, edges and holes - Height of side wall 200 mm - Drill holes in the side wall in a diagonal grid - Including scaling on the surface - Construction reinforced by ribs - Grid lines enable precise structures The welding tables are provided with a scale as standard. Plasma nitrided version: - Protection against rust / scratches / weld spatter adhesion - more corrosion-resistant / higher load capacity Equipment: - 28 hole pattern / dimensions 2000 x 1000 x 200 mm - Extreme plasma nitrided version with scale - with diagonal grid on the table surface - Sidewall with diagonal grid - Including 4x basic equipment

Condition: like new (used), Year of construction: 2023, functionality: fully functional, machine/vehicle number: 630213235, pressing force: 60 t, filling opening width: 650 mm, filling opening length: 1,195 mm, bale weight: 550 kg, overall weight: 2,450 kg, The machine is in mint condition! TECHNICAL DETAILS Pressing force: 594 kN / 60 t Specific pressing force: 45 N/cm² Cycle time in idle mode: 25 s Theoretical pressing output (idle): 32.5 m³/h Filling height: 1,115 mm Filling opening dimensions: 1,195 x 650 mm Cgjdpfx Ageyqw Sqskjp Bale dimensions: 1,200 x 1,200 x 1,100 mm Maximum bale weight: 550 kg Material to be pressed: Film, mixed paper, cardboard, die-cut waste MACHINE DETAILS Drive power: 4 kW Voltage: 400 V Frequency: 50 Hz Door design: Sliding door Door lock: Hydraulic Feeding type: Manual Consumables: Wire, loop wire Dimensions & Weight Dimensions (L x W x H): 1,780 x 1,568 x 2,985 mm Machine weight: 2,450 kg FEATURES HSM TCS (Torsion Control System) for press plate tilt monitoring Automatic start of pressing process Specifications, information and technical data as provided by the manufacturer. Therefore, no guarantee given by the seller for their accuracy.

Condition: excellent (used), Year of construction: 1998, I sell the corpus press for furniture boxes assembly RAMARCH PN31, year 1998. Material size 2500 x 1300 x 600mm Cgodpfxoh Iahge Agkop Electropneumatic operation. Producer: RAMARCH, Spain. (nowadays DYNMA) Very good condition. Avialable immediately.

Condition: excellent (used), Year of construction: 2002, I sell the corpus press for furniture boxes assembly RAMARCH PN31, year 2002. Material size 2500 x 1300 x 600mm Cgsdpfx Ash Iahcogkep Electropneumatic operation. Producer: RAMARCH, Spain. (nowadays DYNMA) Very good condition. Avialable immediately.

Condition: used, functionality: fully functional, jaw width: 16 mm, jaw height: 19 mm, Flat EDM vice, used Brand: Matchling Type: V1650 Length: 100 mm, Width: 100 mm, Height: 16 mm (without spindle) Material: stainless steel Jaw width: 16 mm Clamping range: up to 48 mm Jaw height: 19 mm With downforce feature Cedsymdiujpfx Agkjgp stainless in wooden case

Condition: new, functionality: fully functional, jaw width: 20 mm, jaw height: 19 mm, Flat EDM vice Brand: Matchling Type: V2075 Length: 125 mm, Width: 100 mm, Height: 20 mm (without spindle) Material: stainless steel Jaw width: 20 mm Clamping range: up to 75 mm Jaw height: 19 mm Down-thrust feature Corrosion-resistant In wooden box Cgodpsymdamofx Agkjp

Condition: good (used), e.g. suitable for a high-performance lead and draw spindle lathe WEILER 300 or others For spindle bores diameter 38 mm with bracket, draw tube and collets Ø 1, 2, 3, 4, 5, 6 (2x), 7, 8, 9, 10, 11, 13, 14, 16, 18, 19, 20, 21, 22, 23, 25 mm and for square bar □ 6, 8, 10, 12, 16 mm, 1 center punch with collet holder, … Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel Cgjdpfx Agsw Sfitekjp

Condition: used, Year of construction: 2000, functionality: fully functional, pressing force: 54 t, input voltage: 400 V, power: 4 kW (5.44 HP), input frequency: 50 Hz, We offer this used baler HSM 500.1 V1, year of manufacture 2000. Model: HSM 500.1 V1 Cedpfoym Nmrjx Agkjgp Machine number: 6132.234.0 Serial number: 210183092 Operating pressure: 54 t Voltage: 400 V Frequency: 50 Hz Motor power: 4 kW Rated current: A Year of manufacture: 2000 If you have any questions or require further information, please send us a message or contact us by phone.

Condition: new, Year of construction: 2026, functionality: fully functional, Pneumatic clamping ensuring precise fixture of worked material, increasing cut accuracy and quality. This clamping is easy to assemble and operate. Technical data Clamping length 3200 mm Cgsdpfevxtcqox Agksp Material height 100 mm Actuators 4 Working pressure 2 bar Manufacturer: Cormak

Condition: new, Year of construction: 2026, Diameter of bolts in the set – 14 mm. Used for milling, iron working, mechanical and drilling processes. In the set: Csdpfx Asvxtbtjgkjgp Extension nuts – 4 pieces Flanged nuts – 6 pieces T-slot nuts – 6 pieces Stepped support – Support block, stepped (3 types, 4 pieces each) – 12 pieces Stepped clamp (3 types, 2 pieces each) – 6 pieces 3', 4', 5', 6', 7', 8' stud bolts - 4 pieces each Manufacturer: Cormak

Condition: new, Year of construction: 2026, Diameter of bolts in the set – 10 mm. Used for milling, iron working, mechanical and drilling processes In the set: Extension nuts – 4 pieces Flanged nuts – 6 pieces Csdpfx Agovxtaijkegp T-slot nuts – 6 pieces Stepped support – Support block, stepped (3 types, 4 pieces each) – 12 pieces Stepped clamp (3 types, 2 pieces each) – 6 pieces 3', 4', 5', 6', 7', 8' stud bolts - 4 pieces each Manufacturer: Cormak